occasion. This resulted in zero mapped segments, triggering an assert in
the PS3 CDROM driver. Allow no DMA for 0-length transfers.
Approved by: re (glebius)
MFC after: 1 week
install directly into standard POWER LPARs, as found for example in
QEMU. The core of this device is the SCSI RDMA protocol as also found in
Infiniband. The SRP portions of the driver will be factored out and placed
/sys/cam in the future to allow them to be used for IB storage. Thanks to
Scott Long for a great deal of implementation help.
Reviewed by: scottl
Approved by: re (kib)
platform modules. Whether to call this function or not is highly machine
dependent: on some systems, it is required, while on others it breaks
everything. Platform modules are in a better position to figure this
out. This is required for POWER hypervisor SCSI to work correctly. There
are no functional changes on Powermac systems.
Approved by: re (kib)
property such as those found on some real and emulated IBM systems. The
approach, which is taken from Linux, is to scan through the PCI bars
until we find one large enough to contain the linear framebuffer and
which is ideally prefetchable if no "address" property can be found.
This makes the graphical console work with the pSeries target in QEMU.
Approved by: re (delphij)
operation on systems with multiple serial ports. Also turn on
interrupts for the UART device, which were disabled due to a
now-fixed bug in QEMU.
Approved by: re (gjb)
there as "kern.ipc.sendfile.readahead".
- Push all nsfbuf related tunables into MD code. Don't move them
to new namespace in favor of POLA.
Reviewed by: scottl
Approved by: re (gjb)
pmap_clear_reference() has had exactly one caller in the kernel for
several years, more precisely, since FreeBSD 8. Now, that call no
longer exists.
Approved by: re (kib)
Sponsored by: EMC / Isilon Storage Division
Requirements) systems from the projects/pseries branch. This in principle
includes all IBM POWER hardware released in the last 15 years with the
exception of POWER3-based systems when run in 64-bit mode. The main
development target, however, has been the PAPR logical partition support
that is the default target in KVM on POWER and QEMU -- mileage may vary
on actual hardware at present. Much of the heavy lifting here was done
by Andreas Tobler.
Approved by: re (kib)
needed on some more fragile systems to avoid machine checks when blindly
probing the PCI bus. Also reduce ofw_pcibus's priority slightly so that it
can be overridden.
Approved by: re (gjb)
into the DMA map. The length of the buffer had not yet been
initialized, however, so this would copy gibberish unless it
happened to be right by chance. This bug mostly only affected
systems with IOMMUs.
Approved by: re (gjb)
MFC after: 3 days
used as cross-references in the device tree and phandles as used by the
Open Firmware client interface are in different namespaces. This include
IBM pSeries hardware as well as FDT systems. FDT certainly abuses
ihandles for this purpose and should be modified to use this API
eventually. This changes no behavior on systems where FreeBSD already
worked.
Reviewed by: marius
Approved by: re (kib)
MFC after: 2 weeks
chain. This repairs a panic observed during pageout on some 64-bit
PowerPC systems.
Submitted by: grehan
Approved by: re (kib)
MFC after: 2 weeks
Revisit after: 10.0
making sure they are all misaligned at +8 bytes. This fixes clang builds
of powerpc64 kernels (aside from a required increase in KSTACK_PAGES which
will come later).
This commit from FreeBSD/powerpc64 with a clang-built kernel.
MFC after: 2 weeks
MADV_DONTNEED) and madvise(..., MADV_FREE). Specifically, introduce a new
pmap function, pmap_advise(), that operates on a range of virtual addresses
within the specified pmap, allowing for a more efficient implementation of
MADV_DONTNEED and MADV_FREE. Previously, the implementation of
MADV_DONTNEED and MADV_FREE relied on per-page pmap operations, such as
pmap_clear_reference(). Intuitively, the problem with this implementation
is that the pmap-level locks are acquired and released and the page table
traversed repeatedly, once for each resident page in the range
that was specified to madvise(2). A more subtle flaw with the previous
implementation is that pmap_clear_reference() would clear the reference bit
on all mappings to the specified page, not just the mapping in the range
specified to madvise(2).
Since our malloc(3) makes heavy use of madvise(2), this change can have a
measureable impact. For example, the system time for completing a parallel
"buildworld" on a 6-core amd64 machine was reduced by about 1.5% to 2.0%.
Note: This change only contains pmap_advise() implementations for a subset
of our supported architectures. I will commit implementations for the
remaining architectures after further testing. For now, a stub function is
sufficient because of the advisory nature of pmap_advise().
Discussed with: jeff, jhb, kib
Tested by: pho (i386), marcel (ia64)
Sponsored by: EMC / Isilon Storage Division
which is the part of struct vmspace, allocated from UMA_ZONE_NOFREE
zone. Initialize the pmap lock in the vmspace zone init function, and
remove pmap lock initialization and destruction from pmap_pinit() and
pmap_release().
Suggested and reviewed by: alc (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
used by the tools in base systems and with sandboxing more and more tools
the usage should only increase.
Submitted by: Mariusz Zaborski <oshogbo@FreeBSD.org>
Sponsored by: Google Summer of Code 2013
MFC after: 1 month
Unify the 2 concept into a real, minimal, sxlock where the shared
acquisition represent the soft busy and the exclusive acquisition
represent the hard busy.
The old VPO_WANTED mechanism becames the hard-path for this new lock
and it becomes per-page rather than per-object.
The vm_object lock becames an interlock for this functionality:
it can be held in both read or write mode.
However, if the vm_object lock is held in read mode while acquiring
or releasing the busy state, the thread owner cannot make any
assumption on the busy state unless it is also busying it.
Also:
- Add a new flag to directly shared busy pages while vm_page_alloc
and vm_page_grab are being executed. This will be very helpful
once these functions happen under a read object lock.
- Move the swapping sleep into its own per-object flag
The KPI is heavilly changed this is why the version is bumped.
It is very likely that some VM ports users will need to change
their own code.
Sponsored by: EMC / Isilon storage division
Discussed with: alc
Reviewed by: jeff, kib
Tested by: gavin, bapt (older version)
Tested by: pho, scottl
- update powerpc/GENERIC64 as well, suggested by mdf
- update comments so that they make sense after the change, suggested by
jhb
X-MFC after: never (change specific to head)
KDB_TRACE is not an alternative to DDB/etc, they are complementary.
So I do not see any reason to not enable KDB_TRACE by default.
X-MFC after: never (change specific to head)
transparent layering and better fragmentation.
- Normalize functions that allocate memory to use kmem_*
- Those that allocate address space are named kva_*
- Those that operate on maps are named kmap_*
- Implement recursive allocation handling for kmem_arena in vmem.
Reviewed by: alc
Tested by: pho
Sponsored by: EMC / Isilon Storage Division
* Make Yarrow an optional kernel component -- enabled by "YARROW_RNG" option.
The files sha2.c, hash.c, randomdev_soft.c and yarrow.c comprise yarrow.
* random(4) device doesn't really depend on rijndael-*. Yarrow, however, does.
* Add random_adaptors.[ch] which is basically a store of random_adaptor's.
random_adaptor is basically an adapter that plugs in to random(4).
random_adaptor can only be plugged in to random(4) very early in bootup.
Unplugging random_adaptor from random(4) is not supported, and is probably a
bad idea anyway, due to potential loss of entropy pools.
We currently have 3 random_adaptors:
+ yarrow
+ rdrand (ivy.c)
+ nehemeiah
* Remove platform dependent logic from probe.c, and move it into
corresponding registration routines of each random_adaptor provider.
probe.c doesn't do anything other than picking a specific random_adaptor
from a list of registered ones.
* If the kernel doesn't have any random_adaptor adapters present then the
creation of /dev/random is postponed until next random_adaptor is kldload'ed.
* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a
system wide one.
Submitted by: arthurmesh@gmail.com, obrien
Obtained from: Juniper Networks
Reviewed by: obrien
