The pwm utility cant set the only flag defined (PWM_POLARITY_INVERTED) so this
patch add the option -I (capital letter i) to send it to the drivers.
None of existing PWM driver have implemented support for flags.
But soon:ish I will put up an review of a pwm driver using TI OMAP DMTimer.
Differential Revision: https://reviews.freebsd.org/D29137
MFC after: 2 weeks
Daniel reported that NFSv4 mounts were not working despite having
set "nfsv4_server_enable=YES" in /etc/rc.conf. Mountd was logging a
message that there was no /etc/exports file.
He noted that creating a /etc/exports file with a "V4:" line in it
was needed make NFSv4 mounts work.
At least one "V4:" line in one of the exports(5) file(s) is needed to
make NFSv4 mounts work. This patch fixes mountd.c so that it logs a
message indicting that there is no "V4:" line in any exports(5)
file when NFSv4 mounts are enabled.
To avoid this message being generated erroneously, /etc/rc.d/mountd
is updated to make sure vfs.nfsd.server_max_nfsvers is properly set
before mountd(8) is started.
Reported by: debdrup
PR: 253901
MFC after: 2 weeks
The save/restore feature uses a unix domain socket to send messages
from bhyvectl(8) to a bhyve(8) process. A datagram socket will suffice
for this.
An added benefit of using a datagram socket is simplified code. For
bhyve, the listen/accept calls are dropped; and for bhyvectl, the
connect() call is dropped.
EPRINTLN handles raw mode for bhyve(8), use it to print error messages.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D28983
Use errno to print a more descriptive error message when vm_open() fails
libvmm: preserve errno when vm_device_open() fails
vm_destroy() squashes errno by making a dive into sysctlbyname() - we
can safely skip vm_destroy() here since it's not doing any critical
clean up at this point. Replace vm_destroy() with a free() call.
PR: 250671
MFC after: 3 days
Submitted by: marko@apache.org
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D29109
Instead of whether /boot/efi exists, which it now always does, including
on systems that don't and can't use EFI, use whether /boot/efi is
present in fstab to signal to the installer that it is a valid ESP and
should be configured. This has essentially the same semantics, but allows
/boot/efi to be created unconditionally.
Reviewed by: bdragon, imp
Tested by: bdragon (ppc64)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29068
Recent changes have made it such that attaching to a jail will augment
the attaching process' cpu mask with the jail's cpuset. While this is
convenient for allowing the administrator to cpuset arbitrary programs
that will attach to a jail, this is decidedly not convenient for
executing long-running daemons during jail creation.
This change inserts a reset of the process cpuset to the root cpuset
between the fork and attach to execute a command. This allows commands
executed to have the widest mask possible, and the administrator can
cpuset(1) it back down inside the jail as needed.
With this applied, one should be able to change a jail's cpuset at
exec.poststart in addition to exec.created. The former was made
difficult if jail(8) itself was running with a constrained set, as then
some processes may have been spawned inside the jail with a non-root
set. The latter is the preferred option so that processes starting in
the jail are constrained appropriately up front.
Note that all system commands are still run with the process' initial
cpuset applied.
PR: 253724
MFC after: 3 days
Reviewed by: jamie
Differential Revision: https://reviews.freebsd.org/D29008
On system crontabs, multiple blanks are not being consumed after reading the
username. This change adds blank consumption before parsing any -[qn] options.
Without this change, an entry like:
* * * * * username -n true # Two spaces between username and option.
will fail, as the shell will try to execute (' -n true'), while an entry like:
* * * * * username -n true # One space between username and option.
works as expected (executes 'true').
For user crontabs, this is not an issue as the preceding (day of week
or @shortcut) processing consumes any leading whitespace.
PR: 253699
Submitted by: Eric A. Borisch <eborisch@gmail.com>
MFC after: 1 week
init(8) sets the "daemon" login class without specifying a pw
entry (so no substitutions are done on the variables). service(8)'s
use of env -L had the effect of specifying root's pw entry, with two
effects: getpwnam and getpwuid are being called, which may not be
entirely safe depending on what nsswitch is up to and what stage of
boot we are at, and substitutions would have been done.
Fix by teaching env(8) to allow -L -/classname to set the class
environment with no pw entry at all specified, and use it in
service(8).
PR: 253959
Ranges use the function get_number, which means that ranges of names
are supported and indeed always have been, righ back to the initial
import.
PR: docs/253969
Reported by: Ben Bullock <benkasminbullock@gmail.com>
Set the filter-specific flags VQ_MOUNT and VQ_UNMOUNT for the
EVFILT_FS filter.
The filter-specific flags for the EVFILT_FS filter are undocumented, but
their usage can be found by looking up vfs_event_signal().
Reviewed by: trasz
Differential Revision: https://reviews.freebsd.org/D28975
fmtree(8) deprecation was announced on February 12, 2021, and no longer
built by default as of that date. The deprecation notice was merged
back to stable/12 and stable/13 + releng/13.0.
Continue with the plan by finishing the removal.
Relnotes: yes
In the 761d2bb5b9 we added nojailvnet
keyword. The nojailvnet keyword is used to skip startup scripts in
jails that are run without VNET.
The service.sh was omitted in this commit. The service.sh
even documents that this is the same code as in rc - so lets reflect
that.
Submitted by: Adam Wołk <a.wolk@fudosecurity.com>
Sponsored by: Fudo Security
Based on an idea from dvl's coworker, László DANIELISZ, implement
a new flag, 'E', that prevents newsyslog(8) from rotating the empty
log files. This 'E' flag ist mostly usable in conjunction with 'B'
flag that instructs newsyslog(8) to not insert an informational
message into the log file after rotation, keeping it still empty.
Reviewed by: markj, ian, manpages (rpokala)
Approved by: markj, ian, manpages (rpokala)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28940
MAX_SNAPSHOT_VMNAME is a macro used to set the size of a character
buffer that stores a filename or the path to a file - this file is used
by the save/restore feature.
Since the file doesn't have anything to do with a vm name, rename
MAX_SNAPSHOT_VMNAME to MAX_SNAPSHOT_FILENAME. Bump the size to PATH_MAX
while here.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D28879
Combine send_start_checkpoint() and send_start_suspend() into a
single function named snapshot_request().
snapshot_request() is equivalent to send_start_checkpoint() and
send_start_suspend() except that it takes an additional argument. The
additional argument, enum ipc_opcode, is used to determine the type of
snapshot request being performed. Also, switch to using strlcpy instead
of strncpy.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D28878
Generalize the naming here since the domain socket that uses these codes
might be used for purposes other than the save/restore feature.
- rename checkpoint_opcodes to ipc_opcode
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D28877
The manual page lists a bunch of examples, some of which already exist
in this file. Since it's both easier to remember when all examples are
listed in the same location, move examples so they get installed into
/etc/inetd.conf
This also means users won't have to copy-paste, but can simply
uncomment one or more services to use them.
As such, it also becomes necessary to remove the examples from the
manual page, so instead add a note explaining where the previous
examples as well as others may be found.
Cross-references, including to ports, have also been added where
applicable.
The rsync example has lived in the bug tracker for too long,
considering how useful it can situationally be, for example when
backup jobs on client devices are run through periodic(8) weekly.
The microsoft-ds entry is necessary for Windows 10 compatibility
(this can be confirmed with packet capturing, as it is not readily
documented at time of writing).
While here, remove two examples for which compatible daemons could not
be found in ports.
Submitted by: David Yeske <dyeske at gmail.com> (in part, prev ver)
PR: 122037
Reviewed by: kevans, brueffer, lwhsu, yuripv
Differential Revision: https://reviews.freebsd.org/D28882
Per hier(7), the ESP will be mounted at /boot/efi. On UFS systems,
any existing ESP will be reused and mounted there; otherwise, a new one
will be made. On ZFS systems, space for an ESP is allocated on all disks
in the root pool, but only the partition actually used to boot is set up
and mounted.
This makes future upgrades of the EFI loader easier (upgrade scripts can
just change /boot/efi) and also greatly simplifies the parts of the
installer involved in initialization of the ESP. It also makes the
installer's behavior correspond to the documentation in hier(7).
Reviewed by: imp, tsoome
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D28897
Add /var/run/bhyve/ to BSD.var.dist so we don't have to call mkdir when
creating the unix domain socket for a given bhyve vm.
The path to the unix domain socket for a bhyve vm will now be
/var/run/bhyve/vmname instead of /var/run/bhyve/checkpoint/vmname
Move BHYVE_RUN_DIR from snapshot.c to snapshot.h so it can be shared
to bhyvectl(8).
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D28783
The makefs msdosfs code includes fs/msdosfs/denode.h which directly uses
struct buf from <sys/buf.h> rather than the makefs struct m_buf.
To work around this problem provide a local denode.h that includes
ffs/buf.h and defines buf as an alias for m_buf.
Reviewed By: kib, emaste
Differential Revision: https://reviews.freebsd.org/D28835
Make sys/buf.h, sys/pipe.h, sys/fs/devfs/devfs*.h headers usable in
userspace, assuming that the consumer has an idea what it is for.
Unhide more material from sys/mount.h and sys/ufs/ufs/inode.h,
sys/ufs/ufs/ufsmount.h for consumption of userspace tools, with the
same caveat.
Remove unacceptable hack from usr.sbin/makefs which relied on sys/buf.h
being unusable in userspace, where it override struct buf with its own
definition. Instead, provide struct m_buf and struct m_vnode and adapt
code to use local variants.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D28679
Changes in the 2fe5a79425 moved dst sockaddr masking from the
routing control plane to the rtsock code.
It broke arp/ndp deletion.
It turns out, arp/ndp perform RTM_GET request first to get an
interface index necessary for the deletion.
Then they simply stamp the reply with RTF_LLDATA and set the
command to RTM_DELETE.
As a result, kernel receives request with non-empty RTA_NETMASK
and clears RTA_DST host bits before passing the message to the
lla code.
De facto, the only needed bits are RTA_DST, RTA_GATEWAY and the
subset of rtm_flags.
With that in mind, fix the interace by clearing RTA_NETMASK
for every messages with RTF_LLDATA.
While here, cleanup arp/ndp code a bit.
MFC after: 1 day
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D28804
The kernel changes needed for nfs-over-tls have been committed to main.
However, nfs-over-tls requires user space daemons to handle the
TLS handshake and other non-application data TLS records.
There is one daemon (rpc.tlsclntd) for the client side and one daemon
(rpc.tlsservd) for the server side, although they share a fair amount
of code found in rpc.tlscommon.c and rpc.tlscommon.h.
They use a KTLS enabled OpenSSL to perform the actual work and, as such,
are only built when MK_OPENSSL_KTLS is set.
Communication with the kernel is done via upcall RPCs done on AF_LOCAL
sockets and the custom system call rpctls_syscall.
Reviewed by: gbe (man pages only), jhb (usr.sbin/Makefile only)
Comments by: jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28430
Relnotes: yes
struct checkpoint_op, enum checkpoint_opcodes, and
MAX_SNAPSHOT_VMNAME are not vmm specific, move them out of the vmmapi
header.
They are used for the save/restore functionality that bhyve(8)
provides and are better suited in usr.sbin/bhyve/snapshot.h
Since bhyvectl(8) requires these, the Makefile for bhyvectl has been
modified to include usr.sbin/bhyve/snapshot.h
Reviewed by: kevans, grehan
Differential Revision: https://reviews.freebsd.org/D28410
When executing automount(8), it will attempt to create the directory where an
autofs filesystem is to be mounted. Explicity set the root path for this
directory to "/".
This fixes the issue where the directory being created was being treated as a
relative path instead of an absolute path (as expected).
PR: 224601
Reported by: kusumi.tomohiro@gmail.com
Reviewed by: trasz
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27832
Note that this mtree(8) is actually installed as fmtree(8), while
mtree(8) is located in ^/contrib/mtree -- thus, the reference to
mtree(8) makes a lot more sense in the context in which folks would
actually notice it. Shout-out to Ravi for pointing out that this may
not be an obvious fact.
MFC after: 3 days
Reviewed by: bdrewery, brooks, cy, emaste
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D28573
unsz was always exactly '1' here due to an unfortunate mispositioning
of closing parenthesis. While it's generally irrelevant because bind(2)
is passed the (accurate) sep->se_ctrladdr_size instead, it's not very
helpful for anything locally that wants to use it rather than assuming
that sep->se_ctrladdr_size perfectly fits the end of sun_path.
Just drop unsz entirely and use the result of SUN_LEN() for it.
MFC-after: 3 days
- One (1) spurious whitespace.
- One (1) occurrence of "random(3) bad, arc4random(3)" good.
- Three (3) writes that will never be seen.
The latter two points are complaints from clang-analyze. Switching to
arc4random(3) is decidedly a good idea because we weren't doing any kind
of PRNG seeding anyways. The discarded assignments are arguably good
for future-proofing, but it's better to improve the S/N ratio from
clang-analyze.
Reviewed by: bapt, manu
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28525
This is limited to bootstrap/add because some real pkg(8) commands
have -r flags with an incompatible meaning/usage, e.g., pkg-audit.
pkg(7) will still commence the search as it has, but it will ignore any
repo objects without the given name so that overrides and whatnot still
work as expected.
The use of it for add is noted in the manpage; notably, that the
signature config for that repository will be used over global config if
it's specified. i.e., pkg(7) should assume that the given pkg did come
from that repository and treat it appropriately.
Reviewed by: bapt, manu
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28524
Move the check for efi variables being supported to after parsing the args. This
allows '-h' to produce both as a normal user as well as on all systems.
The st variable is used as a shortcut for &node->inode->st, but in one
branch just before the exit we update node->inode without changing st.
Reported by: AddressSanitizer
Reviewed By: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28570
These tests create jails with the same name, so they cannot be run in
parallel.
Reviewed By: lwhsu
Differential Revision: https://reviews.freebsd.org/D28482
Commit 5619d49e07 made the getgrgid() call inside bsm work as
intended so we now print "wheel" instead of a numeric 0 in the rgid field.
Reviewed By: markj
Differential Revision: https://reviews.freebsd.org/D28462
The file already includes sys/param.h and should use that definition.
I found this while testing D28332.
Reviewed By: bapt
Differential Revision: https://reviews.freebsd.org/D28331
Make the installer more useful, by allowing it to create a bootable
installation. Also, enable the menu option for ZFS-on-root.
Like arm64, RISC-V boots by UEFI only, so arm64's partedit
implementation is renamed and shared among the two platforms.
Reviewed by: gjb
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D28180
If the installer is creating a new ESP, then this directory will not
exist and the subsequent cp will fail silently. This is usually of no
consequence if /efi/freebsd/loader.efi is set up correctly.
Reviewed by: imp
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D28176
nids(4) was a clever idea in the early 2000's when the market was
flooded with 10/100 NICs with Windows-only drivers, but that hasn't been
the case for ages and the driver has had no meaningful maintenance in
ages. It only supports Windows-XP era drivers.
Also remove:
- ndis support from wpa_supplicant
- ndiscvt(8)
Reviewed By: emaste, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D27609
