Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
is actually sent by the remote node).
Otherwise it generated confusing "Negotiated protocol version 1" debug
messages when processing the second connection.
MFC after: 2 weeks
request back from the receive queue -- it might already be processed
by remote_recv_thread, which lead to crashes like below:
(primary) Unable to receive reply header: Connection reset by peer.
(primary) Unable to send request (Connection reset by peer):
WRITE(954662912, 131072).
(primary) Disconnected from kopusha:7772.
(primary) Increasing localcnt to 1.
(primary) Assertion failed: (old > 0), function refcnt_release,
file refcnt.h, line 62.
Taking the request back was not necessary (it would properly be
processed by the remote_recv_thread) and only complicated things.
MFC after: 2 weeks
indication when a request can be moved to done queue, but also for
detecting the current state of memsync request.
This approach has problems, e.g. leaking a request if memsynk ack from
the secondary failed, or racy usage of write_complete, which should be
called only once per write request, but for memsync can be entered by
local_send_thread and ggate_send_thread simultaneously.
So the following approach is implemented instead:
1) Use hio_countdown only for counting components we waiting to
complete, i.e. initially it is always 2 for any replication mode.
2) To distinguish between "memsync ack" and "memsync fin" responses
from the secondary, add and use hio_memsyncacked field.
3) write_complete() in component threads is called only before
releasing hio_countdown (i.e. before the hio may be returned to the
done queue).
4) Add and use hio_writecount refcounter to detect when
write_complete() can be called in memsync case.
Reported by: Pete French petefrench ingresso.co.uk
Tested by: Pete French petefrench ingresso.co.uk
MFC after: 2 weeks
This is believed to fix hastd crashes, which might occur during
synchronization, triggered by the failed assertion:
Assertion failed: (amp->am_memtab[ext] > 0),
function activemap_write_complete, file activemap.c, line 351.
MFC after: 1 week
kept dirty to reduce the number of on-disk metadata updates. The
sequence of operations is:
1) acquire the activemap lock;
2) update in-memory map;
3) if the list of keepdirty extents is changed, update on-disk metadata;
4) release the lock.
On-disk updates are not frequent in comparison with in-memory updates,
while require much more time. So situations are possible when one
thread is updating on-disk metadata and another one is waiting for the
activemap lock just to update the in-memory map.
Improve this by introducing additional, on-disk map lock: when
in-memory map is updated and it is detected that the on-disk map needs
update too, the on-disk map lock is acquired and the on-memory lock is
released before flushing the map.
Reported by: Yamagi Burmeister yamagi.org
Tested by: Yamagi Burmeister yamagi.org
Reviewed by: pjd
Approved by: re (marius)
MFC after: 2 weeks
waiting on an empty queue as the queue may have several consumers.
Before the fix the following scenario was possible: 2 threads are
waiting on empty queue, 2 threads are inserting simultaneously. The
first inserting thread detects that the queue is empty and is going to
send the signal, but before it sends the second thread inserts
too. When the first sends the signal only one of the waiting threads
receive it while the other one may wait forever.
The scenario above is is believed to be the cause of the observed
cases, when ggate_recv_thread() was getting stuck on taking free
request, while the free queue was not empty.
Reviewed by: pjd
Tested by: Yamagi Burmeister yamagi.org
Approved by: re (marius)
MFC after: 2 weeks
in the future in a backward compatible (API and ABI) way.
The cap_rights_t represents capability rights. We used to use one bit to
represent one right, but we are running out of spare bits. Currently the new
structure provides place for 114 rights (so 50 more than the previous
cap_rights_t), but it is possible to grow the structure to hold at least 285
rights, although we can make it even larger if 285 rights won't be enough.
The structure definition looks like this:
struct cap_rights {
uint64_t cr_rights[CAP_RIGHTS_VERSION + 2];
};
The initial CAP_RIGHTS_VERSION is 0.
The top two bits in the first element of the cr_rights[] array contain total
number of elements in the array - 2. This means if those two bits are equal to
0, we have 2 array elements.
The top two bits in all remaining array elements should be 0.
The next five bits in all array elements contain array index. Only one bit is
used and bit position in this five-bits range defines array index. This means
there can be at most five array elements in the future.
To define new right the CAPRIGHT() macro must be used. The macro takes two
arguments - an array index and a bit to set, eg.
#define CAP_PDKILL CAPRIGHT(1, 0x0000000000000800ULL)
We still support aliases that combine few rights, but the rights have to belong
to the same array element, eg:
#define CAP_LOOKUP CAPRIGHT(0, 0x0000000000000400ULL)
#define CAP_FCHMOD CAPRIGHT(0, 0x0000000000002000ULL)
#define CAP_FCHMODAT (CAP_FCHMOD | CAP_LOOKUP)
There is new API to manage the new cap_rights_t structure:
cap_rights_t *cap_rights_init(cap_rights_t *rights, ...);
void cap_rights_set(cap_rights_t *rights, ...);
void cap_rights_clear(cap_rights_t *rights, ...);
bool cap_rights_is_set(const cap_rights_t *rights, ...);
bool cap_rights_is_valid(const cap_rights_t *rights);
void cap_rights_merge(cap_rights_t *dst, const cap_rights_t *src);
void cap_rights_remove(cap_rights_t *dst, const cap_rights_t *src);
bool cap_rights_contains(const cap_rights_t *big, const cap_rights_t *little);
Capability rights to the cap_rights_init(), cap_rights_set(),
cap_rights_clear() and cap_rights_is_set() functions are provided by
separating them with commas, eg:
cap_rights_t rights;
cap_rights_init(&rights, CAP_READ, CAP_WRITE, CAP_FSTAT);
There is no need to terminate the list of rights, as those functions are
actually macros that take care of the termination, eg:
#define cap_rights_set(rights, ...) \
__cap_rights_set((rights), __VA_ARGS__, 0ULL)
void __cap_rights_set(cap_rights_t *rights, ...);
Thanks to using one bit as an array index we can assert in those functions that
there are no two rights belonging to different array elements provided
together. For example this is illegal and will be detected, because CAP_LOOKUP
belongs to element 0 and CAP_PDKILL to element 1:
cap_rights_init(&rights, CAP_LOOKUP | CAP_PDKILL);
Providing several rights that belongs to the same array's element this way is
correct, but is not advised. It should only be used for aliases definition.
This commit also breaks compatibility with some existing Capsicum system calls,
but I see no other way to do that. This should be fine as Capsicum is still
experimental and this change is not going to 9.x.
Sponsored by: The FreeBSD Foundation
C11 atomics now work on all the architectures. Have at least a single
piece of software in our base system that uses C11 atomics. This
somewhat makes it less likely that we break it because of LLVM imports,
etc.
This compiler flag enforces that that people either mark variables
static or use an external declarations for the variable, similar to how
-Wmissing-prototypes works for functions.
Due to the fact that Yacc/Lex generate code that cannot trivially be
changed to not warn because of this (lots of yy* variables), add a
NO_WMISSING_VARIABLE_DECLARATIONS that can be used to turn off this
specific compiler warning.
Announced on: toolchain@
given descriptors, use Capsicum sandboxing for hastd in primary and secondary
modes. Allow for DIOCGDELETE and DIOCGFLUSH ioctls on provider descriptor and
for G_GATE_CMD_MODIFY, G_GATE_CMD_START, G_GATE_CMD_DONE and G_GATE_CMD_DESTROY
on GEOM Gate descriptor.
Sponsored by: The FreeBSD Foundation
why it will now be the default.
- Bump protocol version to 2 and add backward compatibility for version 1.
- Allow to specify hosts by kern.hostid as well (in addition to hostname and
kern.hostuuid) in configuration file.
Sponsored by: Panzura
Tested by: trociny
