Commit Graph

15 Commits

Author SHA1 Message Date
obrien
3b8fff9e4c Use __FBSDID(). 2003-06-11 00:56:59 +00:00
alc
ae179e006f The data in an sf_buf should not be modified by the mbuf system. Mark
the mbuf as read only.

Reviewed by:	gallatin
2003-04-11 07:02:36 +00:00
alc
e1dab143cd Remove some dead code. 2003-04-08 18:24:28 +00:00
alc
6f59be774d Pass the vm_page's address to sf_buf_alloc(); map the vm_page as part
of sf_buf_alloc() instead of expecting sf_buf_alloc()'s caller to map it.

The ultimate reason for this change is to enable two optimizations:
(1) that there never be more than one sf_buf mapping a vm_page at a time
and (2) 64-bit architectures can transparently use their 1-1 virtual
to physical mapping (e.g., "K0SEG") avoiding the overhead of pmap_qenter()
and pmap_qremove().
2003-03-29 06:14:14 +00:00
jake
783ae539c3 - Add vm_paddr_t, a physical address type. This is required for systems
where physical addresses larger than virtual addresses, such as i386s
  with PAE.
- Use this to represent physical addresses in the MI vm system and in the
  i386 pmap code.  This also changes the paddr parameter to d_mmap_t.
- Fix printf formats to handle physical addresses >4G in the i386 memory
  detection code, and due to kvtop returning vm_paddr_t instead of u_long.

Note that this is a name change only; vm_paddr_t is still the same as
vm_offset_t on all currently supported platforms.

Sponsored by:	DARPA, Network Associates Laboratories
Discussed with:	re, phk (cdevsw change)
2003-03-25 00:07:06 +00:00
gallatin
d18eb82da5 Fix a race condition in socow_setup(): The page must be wired before
sf_buf_alloc() is called, as sf_buf_alloc() may sleep.  If it does sleep,
the page might be reclaimed before wiring occurs.

Reported by: alc
2003-03-18 18:27:33 +00:00
alc
4641d3d127 Pass the sf buf to MEXTADD() as the optional argument. This permits
the simplification of socow_iodone() and sf_buf_free(); they don't
have to reverse engineer the sf buf from the data's address.
2003-03-16 07:19:12 +00:00
alc
3a50d97c5c Remove some unnecessary actions by the zero-copy setup and teardown code.
Remove an incorrect comment.  (Incrementing an object's reference count
does not prevent a process from exiting.  The real concern here is that the
physical page must not be deleted until transmission is complete.  That is
already handled by the VM system and sf_buf_free().)

Tested by:	ken
2003-03-09 20:38:56 +00:00
mike
8630abe45f Change iov_base's type from char *' to the standard void *'. All
uses of iov_base which assume its type is `char *' (in order to do
pointer arithmetic) have been updated to cast iov_base to `char *'.
2002-10-11 14:58:34 +00:00
alc
0f13b0caca o Synchronize updates to struct vm_page::cow with the page queues lock. 2002-09-02 04:04:12 +00:00
dg
6dce2e7eff Moved sf_buf_alloc and sf_buf_free function declarations to sys/socketvar.h
so that they can be seen by external callers.
2002-08-13 19:03:19 +00:00
alc
93d5e16501 Lock accesses to the page queues. 2002-07-13 04:37:22 +00:00
gallatin
d7244e2c6d Remove the advertising clause from the Duke BSD copyright on the
zero-copy files

Requested by: rwatson
Approved by: Jeff Chase (my old boss at Duke)
2002-07-06 02:44:15 +00:00
alfred
d92411ce7a catch up with mextadd callback taking a void argument instead of a caddr_t. 2002-06-29 01:49:22 +00:00
ken
0d3a835f3f At long last, commit the zero copy sockets code.
MAKEDEV:	Add MAKEDEV glue for the ti(4) device nodes.

ti.4:		Update the ti(4) man page to include information on the
		TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options,
		and also include information about the new character
		device interface and the associated ioctls.

man9/Makefile:	Add jumbo.9 and zero_copy.9 man pages and associated
		links.

jumbo.9:	New man page describing the jumbo buffer allocator
		interface and operation.

zero_copy.9:	New man page describing the general characteristics of
		the zero copy send and receive code, and what an
		application author should do to take advantage of the
		zero copy functionality.

NOTES:		Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS,
		TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT.

conf/files:	Add uipc_jumbo.c and uipc_cow.c.

conf/options:	Add the 5 options mentioned above.

kern_subr.c:	Receive side zero copy implementation.  This takes
		"disposable" pages attached to an mbuf, gives them to
		a user process, and then recycles the user's page.
		This is only active when ZERO_COPY_SOCKETS is turned on
		and the kern.ipc.zero_copy.receive sysctl variable is
		set to 1.

uipc_cow.c:	Send side zero copy functions.  Takes a page written
		by the user and maps it copy on write and assigns it
		kernel virtual address space.  Removes copy on write
		mapping once the buffer has been freed by the network
		stack.

uipc_jumbo.c:	Jumbo disposable page allocator code.  This allocates
		(optionally) disposable pages for network drivers that
		want to give the user the option of doing zero copy
		receive.

uipc_socket.c:	Add kern.ipc.zero_copy.{send,receive} sysctls that are
		enabled if ZERO_COPY_SOCKETS is turned on.

		Add zero copy send support to sosend() -- pages get
		mapped into the kernel instead of getting copied if
		they meet size and alignment restrictions.

uipc_syscalls.c:Un-staticize some of the sf* functions so that they
		can be used elsewhere.  (uipc_cow.c)

if_media.c:	In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid
		calling malloc() with M_WAITOK.  Return an error if
		the M_NOWAIT malloc fails.

		The ti(4) driver and the wi(4) driver, at least, call
		this with a mutex held.  This causes witness warnings
		for 'ifconfig -a' with a wi(4) or ti(4) board in the
		system.  (I've only verified for ti(4)).

ip_output.c:	Fragment large datagrams so that each segment contains
		a multiple of PAGE_SIZE amount of data plus headers.
		This allows the receiver to potentially do page
		flipping on receives.

if_ti.c:	Add zero copy receive support to the ti(4) driver.  If
		TI_PRIVATE_JUMBOS is not defined, it now uses the
		jumbo(9) buffer allocator for jumbo receive buffers.

		Add a new character device interface for the ti(4)
		driver for the new debugging interface.  This allows
		(a patched version of) gdb to talk to the Tigon board
		and debug the firmware.  There are also a few additional
		debugging ioctls available through this interface.

		Add header splitting support to the ti(4) driver.

		Tweak some of the default interrupt coalescing
		parameters to more useful defaults.

		Add hooks for supporting transmit flow control, but
		leave it turned off with a comment describing why it
		is turned off.

if_tireg.h:	Change the firmware rev to 12.4.11, since we're really
		at 12.4.11 plus fixes from 12.4.13.

		Add defines needed for debugging.

		Remove the ti_stats structure, it is now defined in
		sys/tiio.h.

ti_fw.h:	12.4.11 firmware.

ti_fw2.h:	12.4.11 firmware, plus selected fixes from 12.4.13,
		and my header splitting patches.  Revision 12.4.13
		doesn't handle 10/100 negotiation properly.  (This
		firmware is the same as what was in the tree previously,
		with the addition of header splitting support.)

sys/jumbo.h:	Jumbo buffer allocator interface.

sys/mbuf.h:	Add a new external mbuf type, EXT_DISPOSABLE, to
		indicate that the payload buffer can be thrown away /
		flipped to a userland process.

socketvar.h:	Add prototype for socow_setup.

tiio.h:		ioctl interface to the character portion of the ti(4)
		driver, plus associated structure/type definitions.

uio.h:		Change prototype for uiomoveco() so that we'll know
		whether the source page is disposable.

ufs_readwrite.c:Update for new prototype of uiomoveco().

vm_fault.c:	In vm_fault(), check to see whether we need to do a page
		based copy on write fault.

vm_object.c:	Add a new function, vm_object_allocate_wait().  This
		does the same thing that vm_object allocate does, except
		that it gives the caller the opportunity to specify whether
		it should wait on the uma_zalloc() of the object structre.

		This allows vm objects to be allocated while holding a
		mutex.  (Without generating WITNESS warnings.)

		vm_object_allocate() is implemented as a call to
		vm_object_allocate_wait() with the malloc flag set to
		M_WAITOK.

vm_object.h:	Add prototype for vm_object_allocate_wait().

vm_page.c:	Add page-based copy on write setup, clear and fault
		routines.

vm_page.h:	Add page based COW function prototypes and variable in
		the vm_page structure.

Many thanks to Drew Gallatin, who wrote the zero copy send and receive
code, and to all the other folks who have tested and reviewed this code
over the years.
2002-06-26 03:37:47 +00:00