sbuf_hexdump(9) should be linked to sbuf(9), not hexdump(3). Another
review will be posted to deduplicate the sbuf_hexdump reference in
in hexdump(3) or at the very least make the information less duplicative.
MFC after: 1 week
X-MFC with: r313437
Sponsored by: Dell EMC Isilon
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
This allows pw(8) to operate on passwd and group files with longer lines
than could be accomodated by a stack buffer. It doesn't take more than a
few hundred users to exceed 8192 bytes in /etc/group.
MFC after: 3 weeks
Sponsored by: The University of Oslo
r285050 fixed a bug in pw that could lead to /etc/passwd or /etc/group
corruption on power loss. However, it fixed it by opening those files with
O_SYNC, which is very slow, especially on ZFS. This change replaces O_SYNC
with appropriately placed fsync()s instead, which is much faster. Using a
ZFS tmpdir, the time to run pw's kyua tests drops from 245s to 35s.
Reviewed by: allanjude, bapt, vangyzen, garga
Tested on pfSense by: garga
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D8319
This helps to ensure we will not lose SIGINT sent by parent to child.
Reviewed by: sbruno, ngie
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D7892
terminated. Don't bother checking for truncation since the subsequent
stat() call should detect that and fail.
Reported by: Coverity
CID: 1018189
MFC after: 1 week
after r298107
Summary of changes:
- Replace all instances of FILES/TESTS with ${PACKAGE}FILES. This ensures that
namespacing is kept with FILES appropriately, and that this shouldn't need
to be repeated if the namespace changes -- only the definition of PACKAGE
needs to be changed
- Allow PACKAGE to be overridden by callers instead of forcing it to always be
`tests`. In the event we get to the point where things can be split up
enough in the base system, it would make more sense to group the tests
with the blocks they're a part of, e.g. byacc with byacc-tests, etc
- Remove PACKAGE definitions where possible, i.e. where FILES wasn't used
previously.
- Remove unnecessary TESTSPACKAGE definitions; this has been elided into
bsd.tests.mk
- Remove unnecessary BINDIRs used previously with ${PACKAGE}FILES;
${PACKAGE}FILESDIR is now automatically defined in bsd.test.mk.
- Fix installation of files under data/ subdirectories in lib/libc/tests/hash
and lib/libc/tests/net/getaddrinfo
- Remove unnecessary .include <bsd.own.mk>s (some opportunistic cleanup)
Document the proposed changes in share/examples/tests/tests/... via examples
so it's clear that ${PACKAGES}FILES is the suggested way forward in terms of
replacing FILES. share/mk/bsd.README didn't seem like the appropriate method
of communicating that info.
MFC after: never probably
X-MFC with: r298107
PR: 209114
Relnotes: yes
Tested with: buildworld, installworld, checkworld; buildworld, packageworld
Sponsored by: EMC / Isilon Storage Division
There are a couple of places in the source three where we call
basename() on constant strings. This is bad, because the prototype
standardized by POSIX allows the implementation to use its argument as a
storage buffer.
This change eliminates some of these unportable calls to basename() in
cases where it was only added for cosmetical reasons, namely to trim
argv[0]. There's nothing wrong with setting argv[0] to the full path.
Reviewed by: jilles
Differential Revision: https://reviews.freebsd.org/D6093
This both avoids some dependencies on xinstall.host and allows
bootstrapping on older releases to work due to lack of at least 'install -l'
support.
Sponsored by: EMC / Isilon Storage Division
netbsd-tests.test.mk (r289151)
- Eliminate explicit OBJTOP/SRCTOP setting
- Convert all ad hoc NetBSD test integration over to netbsd-tests.test.mk
- Remove unnecessary TESTSDIR setting
- Use SRCTOP where possible for clarity
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Divison
This fix is spiritually similar to r287442 and was discovered thanks to
the KASSERT added in that revision.
NT_PROCSTAT_VMMAP output length, when packing kinfo structs, is tied to
the length of filenames corresponding to vnodes in the process' vm map
via vn_fullpath. As vnodes may move during coredump, this is racy.
We do not remove the race, only prevent it from causing coredump
corruption.
- Add a sysctl, kern.coredump_pack_vmmapinfo, to allow users to disable
kinfo packing for PROCSTAT_VMMAP notes. This avoids VMMAP corruption
and truncation, even if names change, at the cost of up to PATH_MAX
bytes per mapped object. The new sysctl is documented in core.5.
- Fix note_procstat_vmmap to self-limit in the second pass. This
addresses corruption, at the cost of sometimes producing a truncated
result.
- Fix PROCSTAT_VMMAP consumers libutil (and libprocstat, via copy-paste)
to grok the new zero padding.
Reported by: pho (https://people.freebsd.org/~pho/stress/log/datamove4-2.txt)
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3824
Coredump notes depend on being able to invoke dump routines twice; once
in a dry-run mode to get the size of the note, and another to actually
emit the note to the corefile.
When a note helper emits a different length section the second time
around than the length it requested the first time, the kernel produces
a corrupt coredump.
NT_PROCSTAT_FILES output length, when packing kinfo structs, is tied to
the length of filenames corresponding to vnodes in the process' fd table
via vn_fullpath. As vnodes may move around during dump, this is racy.
So:
- Detect badly behaved notes in putnote() and pad underfilled notes.
- Add a fail point, debug.fail_point.fill_kinfo_vnode__random_path to
exercise the NT_PROCSTAT_FILES corruption. It simply picks random
lengths to expand or truncate paths to in fo_fill_kinfo_vnode().
- Add a sysctl, kern.coredump_pack_fileinfo, to allow users to
disable kinfo packing for PROCSTAT_FILES notes. This should avoid
both FILES note corruption and truncation, even if filenames change,
at the cost of about 1 kiB in padding bloat per open fd. Document
the new sysctl in core.5.
- Fix note_procstat_files to self-limit in the 2nd pass. Since
sometimes this will result in a short write, pad up to our advertised
size. This addresses note corruption, at the risk of sometimes
truncating the last several fd info entries.
- Fix NT_PROCSTAT_FILES consumers libutil and libprocstat to grok the
zero padding.
With suggestions from: bjk, jhb, kib, wblock
Approved by: markj (mentor)
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3548
Each issue has a PR open to track. This workaround allows us to run the
tests to investigate the failures and avoid any new regressions.
PR: 202304, 202305, 202307
Reviewed by: ngie
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3378
temporary file is created and then a rename() call move it to official file.
This operation didn't have any check to make sure data was written to disk
and if a power cycle happens system could end up with a 0 length passwd
or group database.
There is a pfSense bug with more infor about it:
https://redmine.pfsense.org/issues/4523
The following changes were made to protect passwd and group operations:
* lib/libutil/gr_util.c:
- Replace mkstemp() by mkostemp() with O_SYNC flag to create temp file
- After rename(), fsync() call on directory for faster result
* lib/libutil/pw_util.c
- Replace mkstemp() by mkostemp() with O_SYNC flag to create temp file
* usr.sbin/pwd_mkdb/pwd_mkdb.c
- Added O_SYNC flag on dbopen() calls
- After rename(), fsync() call on directory for faster result
* lib/libutil/pw_util.3
- pw_lock() returns a file descriptor to master password file on success
Differential Revision: https://reviews.freebsd.org/D2978
Approved by: bapt
Sponsored by: Netgate
Since METAMODE has been added, sys.mk loads bsd.mkopt.mk which ends load loading
bsd.own.mk which then defines SHLIBDIR before all the Makefile.inc everywhere.
This makes /lib being populated again.
Reported by: many
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
MAM is Medium Auxiliary Memory and is most commonly found as flash
chips on tapes.
This includes support for reading attributes and decoding most
known attributes, but does not yet include support for writing
attributes or reporting attributes in XML format.
libsbuf/Makefile:
Add subr_prf.c for the new sbuf_hexdump() function. This
function is essentially the same function.
libsbuf/Symbol.map:
Add a new shared library minor version, and include the
sbuf_hexdump() function.
libsbuf/Version.def:
Add version 1.4 of the libsbuf library.
libutil/hexdump.3:
Document sbuf_hexdump() alongside hexdump(3), since it is
essentially the same function.
camcontrol/Makefile:
Add attrib.c.
camcontrol/attrib.c:
Implementation of READ ATTRIBUTE support for camcontrol(8).
camcontrol/camcontrol.8:
Document the new 'camcontrol attrib' subcommand.
camcontrol/camcontrol.c:
Add the new 'camcontrol attrib' subcommand.
camcontrol/camcontrol.h:
Add a function prototype for scsiattrib().
share/man/man9/sbuf.9:
Document the existence of sbuf_hexdump() and point users to
the hexdump(3) man page for more details.
sys/cam/scsi/scsi_all.c:
Add a table of known attributes, text descriptions and
handler functions.
Add a new scsi_attrib_sbuf() function along with a number
of other related functions that help decode attributes.
scsi_attrib_ascii_sbuf() decodes ASCII format attributes.
scsi_attrib_int_sbuf() decodes binary format attributes, and
will pass them off to scsi_attrib_hexdump_sbuf() if they're
bigger than 8 bytes.
scsi_attrib_vendser_sbuf() decodes the vendor and drive
serial number attribute.
scsi_attrib_volcoh_sbuf() decodes the Volume Coherency
Information attribute that LTFS writes out.
sys/cam/scsi/scsi_all.h:
Add a number of attribute-related structure definitions and
other defines.
Add function prototypes for all of the functions added in
scsi_all.c.
sys/kern/subr_prf.c:
Add a new function, sbuf_hexdump(). This is the same as
the existing hexdump(9) function, except that it puts the
result in an sbuf.
This also changes subr_prf.c so that it can be compiled in
userland for includsion in libsbuf.
We should work to change this so that the kernel hexdump
implementation is a wrapper around sbuf_hexdump() with a
statically allocated sbuf with a drain. That will require
a drain function that goes to the kernel printf() buffer
that can take a non-NUL terminated string as input.
That is because an sbuf isn't NUL-terminated until it is
finished, and we don't want to finish it while we're still
using it.
We should also work to consolidate the userland hexdump and
kernel hexdump implemenatations, which are currently
separate. This would also mean making applications that
currently link in libutil link in libsbuf.
sys/sys/sbuf.h:
Add the prototype for sbuf_hexdump(), and add another copy
of the hexdump flag values if they aren't already defined.
Ideally the flags should be defined in one place but the
implemenation makes it difficult to do properly. (See
above.)
Sponsored by: Spectra Logic Corporation
MFC after: 1 week
it takes a new argument allowing to specify the endianness of the database
to generate
Differential Revision: https://reviews.freebsd.org/D2730
Reviewed by: ian
examined via 'vmstat -o'. It can be used to determine which files are
using physical pages of memory and how much each is using.
Differential Revision: https://reviews.freebsd.org/D2277
Reviewed by: alc, kib
MFC after: 2 weeks
Sponsored by: Norse Corp, Inc. (forward porting to HEAD/10)
was longer than the second's. There is no need to compute and compare the
member list lengths in a separate pass, since we now just return false when
comparing member names if the list lengths are not equal.
MFC after: 2 weeks
quad_t in setusercontext(). While here, sanitize the clamping of the
priority value, and use the correct type for the return value of
login_getcapnum().
Reviewed by: kib
MFC after: 3 days
