Most of the gpio controller cannot configure or get the configuration
of the pin muxing as it's usually handled in the pinctrl driver.
But they can know what is the pinmuxing driver either because they are
child of it or via the gpio-range property.
Add some new methods to fdt_pinctrl that a pin controller can implement.
Some methods are :
fdt_pinctrl_is_gpio: Use to know if the pin in the gpio mode
fdt_pinctrl_set_flags: Set the flags of the pin (pullup/pulldown etc ...)
fdt_pinctrl_get_flags: Get the flags of the pin (pullup/pulldown etc ...)
The defaults method returns EOPNOTSUPP.
Reviewed by: ian, bcr (manpages)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23093
'install' target is invoked.
While here, bump the sample output version name, and explicitly
add the 'obj' target to avoid polluting the src checkout.
Submitted by: Trond Endrestol
PR: 243287 (related)
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (netgate.com)
This enables virtio modules on PowerPC* target.
On PowerPC64, drivers are also kernel builtin.
QEMU currently needs to be patched to in order to work on LE hosts due to known
issue affecting pre-1.0 (legacy) virtio drivers.
The patch was submitted to QEMU mail list by @afscoelho_gmail.com, available at
https://lists.nongnu.org/archive/html/qemu-devel/2020-01/msg01496.html
Submitted by: Alfredo Dal'Ava Junior <alfredo.junior@eldorado.org.br>
Reviewed by: luporl
Differential Revision: https://reviews.freebsd.org/D22833
This provides a specific pointer for users of tap(4) to understand why their
interfaces are losing their addresses, and specifically how to workaround
this if they need different behavior.
This manpage received a .Dd bump earlier today in r35688, so no bump occurs
this time.
Submitted by: sigsys@gmail.com (via IRC)
It's not immediately clear by what mechanism loader(8) will be loading the
preloaded file. Specifically name-drop loader.conf(5) with a pointer to the
module loading section and a description of what the 'name' should look
like, because that certainly isn't clear from the loader.conf(5) standpoint.
The default loader.conf already has a pointer to md(4) where it appears and
the reference to loader.conf in the new version of this manpage should make
it more clear that this is where one should look for information.
Reported by: swills
Reviewed by: swills, manpages (bcr)
With revision by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D22844
- Garbage collect UMA_ZONE_PAGEABLE & UMA_ZONE_STATIC.
- Move flag VTOSLAB from public to private.
- Introduce public NOTPAGE flag and make HASH private.
- Introduce public NOTOUCH flag and make OFFPAGE private.
- Update man page.
The net effect of this should be to make the contract with clients more
clear. Clients should choose constraints, UMA will figure out how to
implement them. This also breaks the confusing double meaning of
OFFPAGE.
Reviewed by: jeff, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23016
- Enable clang and lld as system toolchains.
- Don't use external GCC for universe by default.
- Re-enable riscv64sf since it builds fine with clang + lld.
Reviewed by: emaste, mhorne
Relnotes: yes
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D23089
This allows cheapest DRAM-less NVMe SSDs to use some of host RAM (about
1MB per 1GB on the devices I have) for its metadata cache, significantly
improving random I/O performance. Device reports minimal and preferable
size of the buffer. The code limits it to 1% of physical RAM by default.
If the buffer can not be allocated or below minimal size, the device will
just have to work without it.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
An i2c bus can be divided into segments which can be selectively connected
and disconnected from the main bus. This is usually done to enable using
multiple slave devices having the same address, by isolating the devices
onto separate bus segments, only one of which is connected to the main bus
at once.
There are several types of i2c bus muxes, which break down into two general
categories...
- Muxes which are themselves i2c slaves. These devices respond to i2c
commands on their upstream bus, and based on those commands, connect
various downstream buses to the upstream. In newbus terms, they are both
a child of an iicbus and the parent of one or more iicbus instances.
- Muxes which are not i2c devices themselves. Such devices are part of the
i2c bus electrically, but in newbus terms their parent is some other
bus. The association with the upstream bus must be established by
separate metadata (such as FDT data).
In both cases, the mux driver has one or more iicbus child instances
representing the downstream buses. The mux driver implements the iicbus_if
interface, as if it were an iichb host bridge/i2c controller driver. It
services the IO requests sent to it by forwarding them to the iicbus
instance representing the upstream bus, after electrically connecting the
upstream bus to the downstream bus that hosts the i2c slave device which
made the IO request.
The net effect is automatic mux switching which is transparent to slaves on
the downstream buses. They just do i2c IO they way they normally do, and the
bus is electrically connected for the duration of the IO and then idled when
it is complete.
The existing iicbus_if callback() method is enhanced so that the parameter
passed to it can be a struct which contains a device_t for the requesting
bus and slave devices. This change is done by adding a flag that indicates
the extra values are present, and making the flags field the first field of
a new args struct. If the flag is set, the iichb or mux driver can recast
the pointer-to-flags into a pointer-to-struct and access the extra
fields. Thus abi compatibility with older drivers is retained (but a mux
cannot exist on the bus with the older iicbus driver in use.)
A new set of core support routines exists in iicbus.c. This code will help
implement mux drivers for any type of mux hardware by supplying all the
boilerplate code that forwards IO requests upstream. It also has code for
parsing metadata and instantiating the child iicbus instances based on it.
Two new hardware mux drivers are added. The ltc430x driver supports the
LTC4305/4306 mux chips which are controlled via i2c commands. The
iic_gpiomux driver supports any mux hardware which is controlled by
manipulating the state of one or more gpio pins. Test Plan
Tested locally using a variety of mux'd bus configurations involving both
ltc4305 and a homebrew gpio-controlled mux. Tested configurations included
cascaded muxes (unlikely in the real world, but useful to prove that 'it all
just works' in terms of the automatic switching and upstream forwarding of
IO requests).
- Drop mention of _LP64. FreeBSD's source generally uses __LP64__
instead of _LP64, and the relevant macros are better covered in the
"Predefined Macros" section.
- Fix a noun/verb disagreement.
Reviewed by: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22975
- Add missing .Pp after the end of some lists so that there is a blank
line before the subsequent paragraph.
- Use a more typical '-tag' bullet list of the make variable descriptions
at the end. This adds separation between bullets and is the formatting
typically used in manpages for this sort of list.
r355588 Fix WITHOUT_CLANG build
r355646 Revert r354348
r355943 add LDNS build knob dependency on OPENSSL
r356111 Use LLVM as default toolchain for all PowerPC targets
To be used when like rmlocks, except when sleeping for readers needs to be
allowed. See the manpage for more information.
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D22823
This enables LLVM as the default compiler for powerpc, powerpc64, and
powerpcspe, as well as LLD as the default linker for powerpc64.
LLD is not yet ready for prime time for powerpc and powerpcspe, but work is
continuing on it.
Submitted by: alfredo.junior_eldorado.org.br
Relnotes: YES
Differential Revision: https://reviews.freebsd.org/D20378
srandom(9) is meaningless on SMP systems or any system with, say,
interrupts. One could never rely on random(9) to produce a reproducible
sequence of outputs on the basis of a specific srandom() seed because the
global state was shared by all kernel contexts. As such, removing it is
literally indistinguishable to random(9) consumers (as compared with
retaining it).
Mark random(9) as deprecated and slated for quick removal. This is not to
say we intend to remove all fast, non-cryptographic PRNG(s) in the kernel.
It/they just won't be random(9), as it exists today, in either name or
implementation.
Before random(9) is removed, a replacement will be provided and in-tree
consumers will be converted.
Note that despite the name, the random(9) interface does not bear any
resemblance to random(3). Instead, it is the same crummy 1988 Park-Miller
LCG used in libc rand(3).
_sleep(9), wakeup(9), sleepqueue(9), et al do not dereference or modify the
channel pointers provided in any way; they are merely used as intptrs into a
dictionary structure to match waiters with wakers. Correctly annotate this
such that _sleep() and wakeup() may be used on const pointers without
invoking ugly patterns like __DECONST(). Plumb const through all of the
underlying sleepqueue bits.
No functional change.
Reviewed by: rlibby
Discussed with: kib, markj
Differential Revision: https://reviews.freebsd.org/D22914
off the stack, initialized to default values, and then filled in with
driver-specific values, all without having to worry about the numerous
other fields in the tag. The resulting template is then passed into
busdma and the normal opaque tag object created. See the man page for
details on how to initialize a template.
Templates do not support tag filters. Filters have been broken for many
years, and only existed for an ancient make/model of hardware that had a
quirky DMA engine. Instead of breaking the ABI/API and changing the
arugment signature of bus_dma_tag_create() to remove the filter arguments,
templates allow us to ignore them, and also significantly reduce the
complexity of creating and managing tags.
Reviewed by: imp, kib
Differential Revision: https://reviews.freebsd.org/D22906
- Don't allow an unprivileged user to set the stride. [1]
- Only set the stride under the softc lock.
- Rename the internal fields to accurately reflect their use. Keep
ro_bkt to avoid changing the user API.
- Simplify the implementation. The port index is just sc_seq / stride.
- Document rr_limit in ifconfig.8.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com> [1]
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22857
There are probably bits that are still wrong, but this fixes some
things at least:
- Add named arguments to the functions in crypto(9).
- Add missing algorithms.
- Don't mention arguments that don't exist in crypto_register.
- Add CIOGSESSION2.
- Remove CIOCNFSESSION.
- Clarify some stale language that assumed an fd had only one sesson.
- Note that you have to use CRIOGET and add a note in BUGS lamenting
that one has to use CRIOGET.
- Various other cleanups.
Reviewed by: cem (earlier version)
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D22784
than "/compat/linux". Useful when you have several compat directories
with different Linux versions and you don't want to clash with files
installed by linux-c7 packages.
Reviewed by: bcr (manpages)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22574
Document the common practices around copyrights with "all rights reserved" in
them as new copyright notices get added.
It's an open question qhether to point people at the fact that since the Berne
convention was ratified, All rights reserved is largely obsolete.
https://en.wikipedia.org/wiki/All_rights_reserved#Obsolescence has the
details. The committer's guide will be revised shortly, and it's likely that's a
better place for this discussion. If not, I'll add a blurb here.
Reviewed by: jhb@, brooks@
Differential Review: https://reviews.freebsd.org/D22800
Contractions cause problems for translators, so s/aren't/are not/ in the one
place this slipped through.
While here, noticed I commited with the date I did the work, not today's
date. Fix that too.
Noticed by: bjk@
Delay the attachment of children, when requested, until after interrutps are
running. This is often needed to allow children to run transactions on i2c or
spi busses. It's a common enough idiom that it will be useful to have its own
wrapper.
Reviewed by: ian
Differential Revision: https://reviews.freebsd.org/D21465
s/BIT_NAND/BIT_ANDNOT/, and for CPU and DOMAINSET too. The actual
implementation is "and not" (or "but not"), i.e. A but not B.
Fortunately this does appear to be what all existing callers want.
Don't supply a NAND (not (A and B)) operation at this time.
Discussed with: jeff
Reviewed by: cem
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22791
r355436 moved mitigation sysctls to machdep.mitigations but did not
rationalize the sense of the invidual knobs. Clarify that the old
names remain the canonical way to set these mitigations.
Backwards compatibility will be maintained for the original names
(e.g. hw.ibrs_disable), but not from the interim names
(e.g. machdep.mitigations.ibrs.disable).
Sponsored by: The FreeBSD Foundation
This typedef is the same as timeout_t except that it is in the callout
namespace and header.
Use this typedef in various places of the callout implementation that
were either using the raw type or timeout_t.
While here, add <sys/callout.h> to the manpage.
Reviewed by: kib, imp
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22751
