to implement fchown(2) and fchmod(2) support for several file types
that previously lacked it. Add MAC entries for chown/chmod done on
posix shared memory and (old) in-kernel posix semaphores.
Based on the submission by: glebius
Reviewed by: rwatson
Approved by: re (bz)
the return context, but from the original context.
Before repeating operation clear DONE flag and error.
Reviewed by: sam
Obtained from: Wheel Sp. z o.o. (http://www.wheel.pl)
Cryptodev uses UIO structure do get data from userspace and pass it to
cryptographic engines. Initially UIO size is equal to size of data passed to
engine, but if UIO is prepared for hash calculation an additional small space
is created to hold result of operation.
While creating space for the result, UIO I/O vector size is correctly
extended, but uio_resid field in UIO structure is not modified.
As bus_dma code uses uio_resid field to determine size of UIO DMA mapping,
resulting mapping hasn't correct size. This leads to a crash if all the
following conditions are met:
1. Hardware cryptographic accelerator writes result of hash operation
using DMA.
2. Size of input data is less or equal than (n * PAGE_SIZE),
3. Size of input data plus size of hash result is grather than
(n * PAGE_SIZE, where n is the same as in point 2.
This patch fixes this problem by adding size of the extenstion to uio_resid
field in UIO structure.
Submitted by: Piotr Ziecik kosmo ! semihalf dot com
Reviewed by: philip
Obtained from: Semihalf
This makes it possible to support ftruncate() on non-vnode file types in
the future.
- 'struct fileops' grows a 'fo_truncate' method to handle an ftruncate() on
a given file descriptor.
- ftruncate() moves to kern/sys_generic.c and now just fetches a file
object and invokes fo_truncate().
- The vnode-specific portions of ftruncate() move to vn_truncate() in
vfs_vnops.c which implements fo_truncate() for vnode file types.
- Non-vnode file types return EINVAL in their fo_truncate() method.
Submitted by: rwatson
- Introduce a finit() which is used to initailize the fields of struct file
in such a way that the ops vector is only valid after the data, type,
and flags are valid.
- Protect f_flag and f_count with atomic operations.
- Remove the global list of all files and associated accounting.
- Rewrite the unp garbage collection such that it no longer requires
the global list of all files and instead uses a list of all unp sockets.
- Mark sockets in the accept queue so we don't incorrectly gc them.
Tested by: kris, pho
and flags with an sxlock. This leads to a significant and measurable
performance improvement as a result of access to shared locking for
frequent lookup operations, reduced general overhead, and reduced overhead
in the event of contention. All of these are imported for threaded
applications where simultaneous access to a shared file descriptor array
occurs frequently. Kris has reported 2x-4x transaction rate improvements
on 8-core MySQL benchmarks; smaller improvements can be expected for many
workloads as a result of reduced overhead.
- Generally eliminate the distinction between "fast" and regular
acquisisition of the filedesc lock; the plan is that they will now all
be fast. Change all locking instances to either shared or exclusive
locks.
- Correct a bug (pointed out by kib) in fdfree() where previously msleep()
was called without the mutex held; sx_sleep() is now always called with
the sxlock held exclusively.
- Universally hold the struct file lock over changes to struct file,
rather than the filedesc lock or no lock. Always update the f_ops
field last. A further memory barrier is required here in the future
(discussed with jhb).
- Improve locking and reference management in linux_at(), which fails to
properly acquire vnode references before using vnode pointers. Annotate
improper use of vn_fullpath(), which will be replaced at a future date.
In fcntl(), we conservatively acquire an exclusive lock, even though in
some cases a shared lock may be sufficient, which should be revisited.
The dropping of the filedesc lock in fdgrowtable() is no longer required
as the sxlock can be held over the sleep operation; we should consider
removing that (pointed out by attilio).
Tested by: kris
Discussed with: jhb, kris, attilio, jeff
o make all crypto drivers have a device_t; pseudo drivers like the s/w
crypto driver synthesize one
o change the api between the crypto subsystem and drivers to use kobj;
cryptodev_if.m defines this api
o use the fact that all crypto drivers now have a device_t to add support
for specifying which of several potential devices to use when doing
crypto operations
o add new ioctls that allow user apps to select a specific crypto device
to use (previous ioctls maintained for compatibility)
o overhaul crypto subsystem code to eliminate lots of cruft and hide
implementation details from drivers
o bring in numerous fixes from Michale Richardson/hifn; mostly for
795x parts
o add an optional mechanism for mmap'ing the hifn 795x public key h/w
to user space for use by openssl (not enabled by default)
o update crypto test tools to use new ioctl's and add cmd line options
to specify a device to use for tests
These changes will also enable much future work on improving the core
crypto subsystem; including proper load balancing and interposing code
between the core and drivers to dispatch small operations to the s/w
driver as appropriate.
These changes were instigated by the work of Michael Richardson.
Reviewed by: pjd
Approved by: re
or SHA512, the blocksize is 128 bytes, not 64 bytes as anywhere else.
The bug also exists in NetBSD, OpenBSD and various other independed
implementations I look at.
- We cannot decide which hash function to use for HMAC based on the key
length, because any HMAC function can use any key length.
To fix it split CRYPTO_SHA2_HMAC into three algorithm:
CRYPTO_SHA2_256_HMAC, CRYPTO_SHA2_384_HMAC and CRYPTO_SHA2_512_HMAC.
Those names are consistent with OpenBSD's naming.
- Remove authsize field from auth_hash structure.
- Allow consumer to define size of hash he wants to receive.
This allows to use HMAC not only for IPsec, where 96 bits MAC is requested.
The size of requested MAC is defined at newsession time in the cri_mlen
field - when 0, entire MAC will be returned.
- Add swcr_authprepare() function which prepares authentication key.
- Allow to provide key for every authentication operation, not only at
newsession time by honoring CRD_F_KEY_EXPLICIT flag.
- Make giving key at newsession time optional - don't try to operate on it
if its NULL.
- Extend COPYBACK()/COPYDATA() macros to handle CRYPTO_BUF_CONTIG buffer
type as well.
- Accept CRYPTO_BUF_IOV buffer type in swcr_authcompute() as we have
cuio_apply() now.
- 16 bits for key length (SW_klen) is more than enough.
Reviewed by: sam
and want to have crypto support loaded as KLD. By moving zlib to separate
module and adding MODULE_DEPEND directives, it is possible to use such
configuration without complication. Otherwise, since IPSEC is linked with
zlib (just like crypto.ko) you'll get following error:
interface zlib.1 already present in the KLD 'kernel'!
Approved by: cognet (mentor)
This is actually a local DoS, as every user can use /dev/crypto if there
is crypto hardware in the system and cryptodev.ko is loaded (or compiled
into the kernel).
Reported by: Mike Tancsa <mike@sentex.net>
MFC after: 1 day
Don't grab Giant in the upper syscall/wrapper code
NET_LOCK_GIANT in the socket code (sockets/fifos).
mtx_lock(&Giant) in the vnode code.
mtx_lock(&Giant) in the opencrypto code. (This may actually not be
needed, but better safe than sorry).
Devfs grabs Giant if the driver is marked as needing Giant.
individual file object implementations can optionally acquire Giant if
they require it:
- soo_close(): depends on debug.mpsafenet
- pipe_close(): Giant not acquired
- kqueue_close(): Giant required
- vn_close(): Giant required
- cryptof_close(): Giant required (conservative)
Notes:
Giant is still acquired in close() even when closing MPSAFE objects
due to kqueue requiring Giant in the calling closef() code.
Microbenchmarks indicate that this removal of Giant cuts 3%-3% off
of pipe create/destroy pairs from user space with SMP compiled into
the kernel.
The cryptodev and opencrypto code appears MPSAFE, but I'm unable to
test it extensively and so have left Giant over fo_close(). It can
probably be removed given some testing and review.
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.
Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
table, acquiring the necessary locks as it works. It usually returns
two references to the new descriptor: one in the descriptor table
and one via a pointer argument.
As falloc releases the FILEDESC lock before returning, there is a
potential for a process to close the reference in the file descriptor
table before falloc's caller gets to use the file. I don't think this
can happen in practice at the moment, because Giant indirectly protects
closes.
To stop the file being completly closed in this situation, this change
makes falloc set the refcount to two when both references are returned.
This makes life easier for several of falloc's callers, because the
first thing they previously did was grab an extra reference on the
file.
Reviewed by: iedowse
Idea run past: jhb
provide no methods does not make any sense, and is not used by any
driver.
It is a pretty hard to come up with even a theoretical concept of
a device driver which would always fail open and close with ENODEV.
Change the defaults to be nullopen() and nullclose() which simply
does nothing.
Remove explicit initializations to these from the drivers which
already used them.
o add a ``done'' flag for crypto operations; this is set when the operation
completes and is intended for callers to check operations that may complete
``prematurely'' because of direct callbacks
o close a race for operations where the crypto driver returns ERESTART: we
need to hold the q lock to insure the blocked state for the driver and any
driver-private state is consistent; otherwise drivers may take an interrupt
and notify the crypto subsystem that it can unblock the driver but operations
will be left queued and never be processed
o close a race in /dev/crypto where operations can complete before the caller
can sleep waiting for the callback: use a per-session mutex and the new done
flag to handle this
o correct crypto_dispatch's handling of operations where the driver returns
ERESTART: the return value must be zero and not ERESTART, otherwise the
caller may free the crypto request despite it being queued for later handling
(this typically results in a later panic)
o change crypto mutex ``names'' so witness printouts and the like are more
meaningful
branches:
Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.
This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.
Approved by: re(scottl)
should be done in crypto_done rather than in the callback thread
o use this flag to mark operations from /dev/crypto since the callback
routine just does a wakeup; this eliminates the last unneeded ctx switch
o change CRYPTO_F_NODELAY to CRYPTO_F_BATCH with an inverted meaning
so "0" becomes the default/desired setting (needed for user-mode
compatibility with openbsd)
o change crypto_dispatch to honor CRYPTO_F_BATCH instead of always
dispatching immediately
o remove uses of CRYPTO_F_NODELAY
o define COP_F_BATCH for ops submitted through /dev/crypto and pass
this on to the op that is submitted
Similar changes and more eventually coming for asymmetric ops.
MFC if re gives approval.
pointer types, and remove a huge number of casts from code using it.
Change struct xfile xf_data to xun_data (ABI is still compatible).
If we need to add a #define for f_data and xf_data we can, but I don't
think it will be necessary. There are no operational changes in this
commit.
cryptodev or kldunload cryptodev module); crypto statistcs; remove
unused alloctype field from crypto op to offset addition of the
performance time stamp
Supported by: Vernier Networks
a consistent interface to h/w and s/w crypto algorithms for use by the
kernel and (for h/w at least) by user-mode apps. Access for user-level
code is through a /dev/crypto device that'll eventually be used by openssl
to (potentially) accelerate many applications. Coming soon is an IPsec
that makes use of this service to accelerate ESP, AH, and IPCOMP protocols.
Included here is the "core" crypto support, /dev/crypto driver, various
crypto algorithms that are not already present in the KAME crypto area,
and support routines used by crypto device drivers.
Obtained from: openbsd
