mv_pci driver reads PCI memory window layout from DTB data and if the
data is incomplete falls back to default value. The value is too small
to fit two PCI spaces for mwlwifi devices on WRT3200ACM so the resource
allocation for them fails. Increase the default to 4Mb from 1Mb so
the devices can be properly attached.
MFC after: 1 week
two zones sharing a keg may have different limits. Now this is going
to work:
zone = uma_zcreate();
uma_zone_set_max(zone, limit);
zone2 = uma_zsecond_create(zone);
uma_zone_set_max(zone2, limit2);
Kegs no longer have uk_maxpages field, but zones have uz_items. When
set, it may be rounded up to minimum possible CPU bucket cache size.
For small limits bucket cache can also be reconfigured to be smaller.
Counter uz_items is updated whenever items transition from keg to a
bucket cache or directly to a consumer. If zone has uz_maxitems set and
it is reached, then we are going to sleep.
o Since new limits don't play well with multi-keg zones, remove them. The
idea of multi-keg zones was introduced exactly 10 years ago, and never
have had a practical usage. In discussion with Jeff we came to a wild
agreement that if we ever want to reintroduce the idea of a smart allocator
that would be able to choose between two (or more) totally different
backing stores, that choice should be made one level higher than UMA,
e.g. in malloc(9) or in mget(), or whatever and choice should be controlled
by the caller.
o Sleeping code is improved to account number of sleepers and wake them one
by one, to avoid thundering herd problem.
o Flag UMA_ZONE_NOBUCKETCACHE removed, instead uma_zone_set_maxcache()
KPI added. Having no bucket cache basically means setting maxcache to 0.
o Now with many fields added and many removed (no multi-keg zones!) make
sure that struct uma_zone is perfectly aligned.
Reviewed by: markj, jeff
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D17773
shell scripts in base, removes the bogus "copyleft", adds the BeerWare license
header and uses rc.subr(8) new 'enable' keyword for adding entries in
rc.conf(5).
Submitted by: erdgeist <erdgeist@erdgeist.org>
Approved by: bapt
MFC after: 2 weeks
vm_kmem_size is u_long, and it might be not capable of holding page
count times PAGE_SIZE, even when scaled down by VM_KMEM_SIZE_SCALE. As
bde reported, 12G PAE config ends up with zero for kmem size.
Explicitly check for overflow and clamp kmem size at vm_kmem_size_max.
If we end up at zero size because VM_KMEM_SIZE_MAX is not defined,
panic with clear explanation rather then failing in a way which is
hard to relate.
Reported by: bde, pho
Tested by: pho
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18767
Add asn1_compile, make-roken, kcc, and slc to the OptionalObsoleteFiles.inc
so they would be removed during delete-old stage if the new world is built
without Kerberos support.
PR: 230725
Submitted by: Dmitry Wagin <dmitry.wagin@ya.ru>
MFC after: 1 week
Just like for Acer C270 chromebook the E820 extmem workaround is required for
FreeBSD to boot on Dell chromebook.
PR: 204916
Submitted by: Keith White <kwhite@site.uottawa.ca>
MFC after: 1 week
cpu_icache_sync_range(), except that it sets pcb_onfault to catch any page
fault, as doing cache maintenance operations for non-mapped generates a
data abort, and use it in freebsd32_sysarch(), so that a userland program
attempting to sync the icache with unmapped addresses doesn't crash the
kernel.
Spotted out by: andrew
r319722 separated struct socket and parts of the socket I/O path into
listening-socket-specific and dataflow-socket-specific pieces. Listening
socket connection notifications are now handled by solisten_wakeup() instead
of sowakeup(), but solisten_wakeup() does not currently post SIGIO to the
owning process.
PR: 234258
Reported by: Kenneth Adelman
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18664
There may be various side effects (device timeout, firmware and / or
kernel panic) when an invalid (or inapplicable - e.g., an MCS rate
for 11g-only device) is set; check rates before sending the frame to
the driver.
How-to-reproduce:
Set an MCS (real or bogus - with 0x80 bit set) rate in ibp_rate0 field
for any device that uses ieee80211_isratevalid() for rate checks -
rum(4), run(4), ural(4), bwi(4) or ral(4); if kernel is compiled
with INVARIANTS the check will result in "rate %d is basic/mcs?" panic.
Tested with WUSB54GC (rum(4)), AP mode.
MFC after: 1 week
pfctl has an issue with 'set skip on <group>', which causes inconsistent
behaviour: the set skip directive works initially, but does not take
effect when the same rules are re-applied.
PR: 229241
MFC after: 1 week
When we skip on a group the kernel will automatically skip on the member
interfaces. We still need to update our own cache though, or we risk
overruling the kernel afterwards.
This manifested as 'set skip' working initially, then not working when
the rules were reloaded.
PR: 229241
MFC after: 1 week
Don't clobber the low part of the register restoring the high component of.
This could lead to very bad behavior if it's an ABI-affected register.
While here, also mark the asm volatile in the SPE high save case, to match
the load case.
Reported by: Branden Bergren (git_bdragon.rtk0.net)
MFC after: 1 week
Summary: reloc_jmpslot function parameter 'defobj' is not used when using ELFv2
ABI
Submitted by: alfredo.junior_eldorado.org.br
Reviewed By: kib, git_bdragon.rtk0.net, emaste, jhibbits
Differential Revision: https://reviews.freebsd.org/D18808
Summary:
I was working on implementing ifuncs on powerpc64 elfv2 today, and I suddenly
realized that the reason I was having so much trouble with AT_HWCAP and
AT_HWCAP2 is they are missing from the sysentvec.
After adding them, the auxv is being filled like it should.
Submitted by: Brandon Bergren (git_bdragon.rtk0.net)
Differential Revision: https://reviews.freebsd.org/D18575
Family 15h is a bit of an oddball. Early models used the same temperature
register and spec (mostly[1]) as earlier CPU families.
Model 60h-6Fh and 70-7Fh use something more like Family 17h's Service
Management Network, communicating with it in a similar fashion. To support
them, add support for their version of SMU indirection to amdsmn(4) and use
it in amdtemp(4) on these models.
While here, clarify some of the deviceid macros in amdtemp(4) that were
added with arbitrary, incorrect family numbers, and remove ones that were
not used. Additionally, clarify intent and condition of heterogenous
multi-socket system detection.
[1]: 15h adds the "adjust range by -49°C if a certain condition is met,"
which previous families did not have.
Reported by: D. C. <tjoard AT gmail.com>
PR: 234657
Tested by: D. C. <tjoard AT gmail.com>
The IPI vector is static, and happens to be the most common interrupt by far
on some systems. Rather than searching for the interrupt every time, cache
the index.
This appears to yield a small performance boost, of about 8% reduction in
buildworld times, on my POWER9 system, when paired with r342975.
The XICS and XIVE need extra data beyond irq and vector. Rather than
performing a separate search, it's better for the general interrupt facility
to hold a private pointer, since the search already must be done anyway at
that level.
Summary:
GCC expects to link in a crtsavres.o on powerpc platforms. On
powerpc64 this is an empty file, but on powerpc and powerpcspe this does contain
some save/restore functions, which may not actually be necessary for newer
modern GCC and clang. This appeases the in-tree gcc, though, and is needed in
order to switch to the BSD CRTRBEGIN.
PR: 233751
Reviewed By: andrew
Differential Revision: https://reviews.freebsd.org/D18826
Check if rate control structures were allocated before trying to
access them in various places; this was possible before on
allocation failure (unlikely), but was revealed after r342211
where allocation was deferred.
In case if driver uses wlan_amrr(4) and it is loaded it
is possible to reproduce the panic via
sysctl net.wlan.<number>.rate_stats
(for wlan0 the number will be 0).
Tested with: RTL8188EE, AP mode + RTL8188CUS, STA mode.
MFC after: 3 days
bc.y: Rev 1.50
- write parse errors to stderr, prompted by Martijn Dekker
- we're only interactive if stdout en stderr are a tty as well as stdin
PR: 234430
Obtained from: OpenBSD
MFC after: 1 week
When building with KCOV enabled the compiler will insert function calls
to probes allowing us to trace the execution of the kernel from userspace.
These probes are on function entry (trace-pc) and on comparison operations
(trace-cmp).
Userspace can enable the use of these probes on a single kernel thread with
an ioctl interface. It can allocate space for the probe with KIOSETBUFSIZE,
then mmap the allocated buffer and enable tracing with KIOENABLE, with the
trace mode being passed in as the int argument. When complete KIODISABLE
is used to disable tracing.
The first item in the buffer is the number of trace event that have
happened. Userspace can write 0 to this to reset the tracing, and is
expected to do so on first use.
The format of the buffer depends on the trace mode. When in PC tracing just
the return address of the probe is stored. Under comparison tracing the
comparison type, the two arguments, and the return address are traced. The
former method uses on entry per trace event, while the later uses 4. As
such they are incompatible so only a single mode may be enabled.
KCOV is expected to help fuzzing the kernel, and while in development has
already found a number of issues. It is required for the syzkaller system
call fuzzer [1]. Other kernel fuzzers could also make use of it, either
with the current interface, or by extending it with new modes.
A man page is currently being worked on and is expected to be committed
soon, however having the code in the kernel now is useful for other
developers to use.
[1] https://github.com/google/syzkaller
Submitted by: Mitchell Horne <mhorne063@gmail.com> (Earlier version)
Reviewed by: kib
Testing by: tuexen
Sponsored by: DARPA, AFRL
Sponsored by: The FreeBSD Foundation (Mitchell Horne)
Differential Revision: https://reviews.freebsd.org/D14599
Extend the vendor class USB audio quirk to cover devices without
the USB audio control descriptor.
PR: 234794
MFC after: 1 week
Sponsored by: Mellanox Technologies
The goal of this change is to make it easier to use getconf to query
the number of available processors.
Sadly it's unclear per POSIX, which form (with a preceding _ or
lacking it) is correct. I will bring this up on the Austin Group list so
this point is clarified for implementors that might rely on this getconf
variable in future POSIX spec versions.
This is something I noticed when trying to import GoogleTest to FreeBSD
as one of the CI scripts uses this variable on Linux.
MFC after: 2 weeks
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D18640
Issue:
ocs_fc(4) driver panics. It's induced by setting the port_state
sysctl to offline, then online, then offline, then online, and so
forth and so on in rapid succession.
Reason:
While we set the port_state to online fc discovery will start and OS
is enumerating the target discs by calling ocs_action(), then set the
port state to "offline" which deletes domain/sport/nodes.
In ocs_action()->XPT_GET_TRAN_SETTINGS we are accessing the remote
node which can be invalid to get the wwpn, wwnn and port.
Fix:
Removed accessing of remote node and domain in some ocs_action() cases.
Populated the required values from ocs_fcport.
This removes the dependency of node and domain structures while
processing XPT_PATH_INQ and XPT_GET_TRAN_SETTINGS.
We will invalidate the target entries after the device lost
timeout(30 seconds).
Approved by: ken, mav
MFC after: 3 weeks
devices like mice, keyboards, bt-audio, ...
This script currently allows scanning for nearby devices, adds one to
/etc/bluetooth/hosts, adds an entry to hcsecd's conf and if it is a HID, add an
entry to bthidd's configs, as well.
Submitted by: erdgeist <erdgeist@erdgeist.org>
Approved by: bapt
MFC after: 2 weeks
Differential Revision: D3778
Reviewers: bapt, emax
In cpu_thread_alloc we would allocate space for the trap frame at the top of
the kernel stack. This is just below the pcb, however due to a missing cast
the pointer arithmetic would use the pcb size, not the trapframe size. As
the pcb is larger than the trapframe this is safe, however later in cpu_fork
we include the case leading to the two disagreeing on the location.
Fix by using the same arithmetic in both locations.
Found by: An early KASAN patch
Sponsored by: DARPA, AFRL
non-regular entry.
do_update() skips entries with DT_DIR type. This does not eliminate
other entries that might exist in the directory. More, since NFS
might fill d_type with DT_UNKNOWN, dot and dotdot entries are not
skipped, then mmap(2) call failed for them when update microcode files
are located on NFS.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
UFS will return EINVAL when quotas are not enabled on a filesystem; ZFS'
equivalent involves not having quotas (there is not way to enable or disable
quotas as such). My initial implementation had it return ENOENT, but
quotactl(2) indicates EINVAL is more appropriate.
MFC after: 2 weeks
Approved by: mav
Reviewed by: markj
Reported by: Emrion <kmachine@free.fr>
Sponsored by: iXsystems Inc
PR: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=234413
CARP shares protocol number 112 with VRRP (RFC 5798). And the size of
VRRP packet may be smaller than CARP. ipfw_chk() does m_pullup() to at
least sizeof(struct carp_header) and can fail when packet is VRRP. This
leads to packet drop and message about failed pullup attempt.
Also, RFC 5798 defines version 3 of VRRP protocol, this version number
also unsupported by CARP and such check leads to packet drop.
carp_input() does its own checks for protocol version and packet size,
so we can remove these checks to be able pass VRRP packets.
PR: 234207
MFC after: 1 week
