interrupt handler for the LANCE devices and remove dma_setup_intr(). We
just can't completely ignore the DMA engine in a LANCE driver anyway and
calling the DMA engine interrupt handler in the LANCE driver directly
allows to cover it by the LANCE driver lock.
work by yar, thompsa and myself. The checksum offloading part also involves
work done by Mihail Balikov.
The most important changes:
o Instead of global linked list of all vlan softc use a per-trunk
hash. The size of hash is dynamically adjusted, depending on
number of entries. This changes struct ifnet, replacing counter
of vlans with a pointer to trunk structure. This change is an
improvement for setups with big number of VLANs, several interfaces
and several CPUs. It is a small regression for a setup with a single
VLAN interface.
An alternative to dynamic hash is a per-trunk static array with
4096 entries, which is a compile time option - VLAN_ARRAY. In my
experiments the array is not an improvement, probably because such
a big trunk structure doesn't fit into CPU cache.
o Introduce an UMA zone for VLAN tags. Since drivers depend on it,
the zone is declared in kern_mbuf.c, not in optional vlan(4) driver.
This change is a big improvement for any setup utilizing vlan(4).
o Use rwlock(9) instead of mutex(9) for locking. We are the first
ones to do this! :)
o Some drivers can do hardware VLAN tagging + hardware checksum
offloading. Add an infrastructure for this. Whenever vlan(4) is
attached to a parent or parent configuration is changed, the flags
on vlan(4) interface are updated.
In collaboration with: yar, thompsa
In collaboration with: Mihail Balikov <mihail.balikov interbgc.com>
this is more consistent with the placement of slaves in /dev/pts. The
actual name doesn't matter as it's not part of the exposed API or used by
libc. In some sense, it would be nice if these device nodes didn't have to
have names in devfs at all.
Suggested by: Stephen McKay <smckay at internode dot on dot net>
however IPv4-in-IPv4 tunnels are now stable on SMP. Details:
- Add per-softc mutex.
- Hold the mutex on output.
The main problem was the rtentry, placed in softc. It could be
freed by ip_output(). Meanwhile, another thread being in
in_gif_output() can read and write this rtentry.
Reported by: many
Tested by: Alexander Shiryaev <aixp mail.ru>
support. Which reminds me that I'm not even sure if this works on _any_
laptop at all. :-o
PR: kern/90607
Submitted by: "Wojciech A. Koszek" <dunstan -at- freebsd.czest.pl>
MFC after: 3 days
This is supposed to fix some Coverity Prevent errors (Ariff didn't
looked at the CID's (ENOTIME), I just told him that there are some problems
in function dsp_ioctl()).
CID: 215-218
Found with: Coverity Prevent(tm)
Submitted by: ariff
MFC after: 5 days
o Change MEM_READ_1/MEM_READ_4 into macros (move them to if_iwireg.h)
o Add support for association LED
o Silently discard f/w notifications that are unknown (fixes spurious
"unknown notification 15" in logs with latest firmware)
o Fix scanning of 5GHz channels
of physical RAM instead of the bottom was a sound idea, but the implementation
left a lot to be desired. Scans would spend considerable time looking at
pages that are above of the address range given by the caller, and multiple
calls (like what happens in busdma) would spend more time on top of that
rescanning the same pages over and over.
Solve this, at least for now, with two simple optimizations. The first is
to not bother scanning high ordered pages that are outside of the provided
address range. Second is to cache the page index from the last successful
operation so that subsequent scans don't have to restart from the top. This
is conditional on the numpages argument being the same or greater between
calls.
MFC After: 2 weeks
specially crafted module. There are several handrolled sollutions to this
problem in the tree already which will be replaced with this. They include
iwi(4), ipw(4), ispfw(4) and digi(4).
No objection from: arch
MFC after: 2 weeks
X-MFC after: some drivers have been converted
kern_prot.c. This API handles reference counting among many other things.
Notably, if MAC is compiled into the kernel, it will properly initialize the
MAC labels when the ucred is allocated.
This work is in preparation for a new MAC entry point which will be responsible
for properly initializing policy specific labels for the NFS server credential.
Utilization of the crfree/crget APIs reduce the complexity associated with
this label's management.
Submitted by: green (with changes) [1]
Obtained from: TrustedBSD Project
Discussed with: rwatson, alfred
[1] I moved the ucred allocation outside the scope of the NFS server lock to
prevent M_WAIKOK allocations from occurring with non-sleep-able locks held.
Additionally, to reduce complexity, the ucred persist as long as the NFS
server descriptor.
implementation is by no means perfect as far as some of the algorithms
that it uses and the fact that it is missing some functionality (try
locks and upgrades/downgrades are not there yet), however it does seem
to work in my local testing. There is more detail in the comments in the
code, but the short version follows.
A reader/writer lock is very much like a regular mutex: it cannot be held
across a voluntary sleep; it can be acquired in an interrupt thread; if
the lock is held by a writer then the priority of any threads that block
on the lock will be lent to the owner; the simple case lock operations all
are done in a single atomic op. It also shares some similiarities
with sx locks: it supports reader/writer semantics (multiple readers,
but single writers); readers are allowed to recurse, but writers are not.
We can extend this implementation further by either improving algorithms
or adding new functionality, but this should at least give us a base to
work with now.
Reviewed by: arch (in theory)
Tested on: i386 (4 cpu box with a kernel module that used 4 threads
that randomly chose between read locks and write locks
that ran w/o panicing for over a day solid. It usually
panic'd within a few seconds when there were bugs during
testing. :) The kernel module source is available on
request.)
queues in turnstiles. Add a new thread member td_tsqueue which contains
the sub-queue of a turnstile that a thread is on when it is blocked on a
turnstile.
each turnstile. Also, allow for the owner thread pointer of a turnstile
to be NULL. This is needed for the upcoming reader/writer lock
implementation.
- Add a new ddb command 'show turnstile' that will look up the turnstile
associated with the given lock argument and display useful information
like the list of threads blocked on each queue, etc. If there isn't an
active turnstile for a lock at the specified address, then the function
will see if there is an active turnstile at the specified address and
display info about it if so.
- Adjust the mutex code to handle the turnstile API changes.
Tested on: i386 (all), alpha, amd64, sparc64 (1 and 3)
argument and looks for a sleep queue associated with that wait channel.
If it finds one it will display information such as the list of threads
sleeping on that queue. If it can't find a sleep queue for that wait
channel, then it will see if that address matches any of the active
sleep queues. If so, it will display information about the sleepq at the
specified address.
is a fatal fault if we are holding any non-sleepable locks. This should
cut down on the number of bogus LORs we currently get when the kernel
panics due to a NULL (or bogus) pointer dereference that goes wandering
off into the VM system which tries to acquire locks and then kicks off
the spurious LORs. This should probably be ported to all the archs at
some point.
Tested on: i386
The difference between WITNESS_CHECK() and WITNESS_WARN() is that
WITNESS_CHECK() should be used in the places that the return value of
witness_warn() is checked, whereas WITNESS_WARN() should be used in places
where the return value is ignored. Specifically, in a kernel without
WITNESS enabled, WITNESS_WARN() evaluates to an empty string where as
WITNESS_CHECK evaluates to 0. I also updated the one place that was
checking the return value of WITNESS_WARN() to use WITNESS_CHECK.
sysctl then it will clear the KTR buffer. Note that if you have active
KTR traces at the same time as a clear operation the behavior is undefined,
though it shouldn't panic.
