In the previous world order, any brand/logo was forced to pull in the
drawer and call drawer.add{Brand,Logo} with the name their brand/logo is
taking and a table describing it.
In the new world order, these files just need to return a table that maps
out graphics types to a table of the exact same format as what was
previously being passed back into the drawer. The appeal here is not needing
to grab a reference back to the drawer module and having a cleaner
data-driven looking format for these. The format has been renamed to 'gfx-*'
prefixes and each one can provide a logo and a brand.
drawer.addBrand/drawer.addLogo will remain in place until FreeBSD 13, as
there's no overhead to them and it's not yet worth the break in
compatibility with any pre-existing brands and logos.
Reviewed by: freqlabs
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24966
OpenZFS will start using some of the kernel timekeeping bits
shortly. This implements the bare minimum of that which currently
is just the time_seconds variable.
Report what console the boot loader is telling the kernel to use:
o Dual (Serial Primary)
o Dual (Video Primary)
o Serial
o Video
This allows the user to interrupt the boot and tweak the cosnole, if
needed, in a trivial way. Useful for installs where the default
selected may not be quite what you want, or when you are running a
dual setup and need to toggle over to the other console being primary.
The 'c'/'C' keys will do the cycling through the consoles. Note:
you'll still have to drop into the loader to set details about serial
consoles. And this doesn't change the console the loader is using.
Reviewed by: kevans@
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D26573
The video on PCI heuristic was broken. It was supposed to infer a
video device when the last element of the path was a PCI DEVICE PATH
node. However, the last node in the device path is an END node, so
this heuristic never fired.
This leads, among other things, to bhyve only producing output in the
serial connection once we leave the boot loader. This restores the
dual headed boot on bhyve + UEFI (as we did in 11.2), but will favor
serial in the absence of other config which may be a change from 11.2.
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D26572
During devswitch probe, we pick boot pool based on boot disk, if the boot
disk happens to have multiple pools in freebsd-zfs partitions, the current
code does pick last pool from boot disk as boot pool. While there is no
way at that stage to test, the more logical approach would be to pick
first matching pool.
This patch is assuming we do pass pool guid pointer with guid value 0,
this will help us to determine, if the guid value is already set or not.
The general suggestion would be not to share disk between different pools.
Reported by: Alexander Leidinger
There was a small window cp was broken. Work around this by using :>
instead of cp /dev/null. Ideally, we'd keep the cp /dev/null in the
build as a regression test, but doing so breaks people that upgraded
during the cp breakage and this is simpler than bootstrapping a
working cp since there's no good __FreeBSD_version sign posts for
that.
Suggested by: lots of people
Too stubborn for his own good: imp
This is the initial set up for PowerPC64LE.
The current plan is for this arch to remain experimental for FreeBSD 13.
This started as a weekend learning project for me and kinda snowballed from
there.
(More to follow momentarily.)
Reviewed by: imp (earlier version), emaste
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26399
I had overthought how to do the FICL_TRUE change. We do not need to
explicitly specify how big the 0 is before the cast to the correct size.
The same change was suggested by both imp@ and Gunther Nikl independently.
Tested on powerpc.
Reported by: imp, Gunther Nikl
Extend the powerpc relative relocation handling from r240782 to a
handful of other architectures. This is needed to properly read
dependency information from kernel modules.
Reviewed by: jhb
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26365
bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.
By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.
By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.
bootonce dataset name is recorded in boot pool labels, bootenv area.
in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.
bootonce and nextboot features are usable in both UEFI and BIOS boot.
To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).
At this time, only lua loader is updated.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512
In D12421, the ability to compile stand/ in little-endian was added, with the
intention to extend loader.kboot to run in Petitboot.
However, no further work was done, as the kernel then gained self-execution
capabilities as Petitboot was taught to load FreeBSD kernels directly.
The FreeBSD installer on powerpc64 (on POWER8 and POWER9) uses
/boot/etc/kboot.conf instead of loader.
As this option does nothing but cause stand/ to be miscompiled and actively
causes confusion, remove it.
(I have a functioning petitboot loader in my local tree, however, it turned
out to be quite inconvient to use due to the current petitboot plugin design
so I put it on hold.)
Reviewed by: emaste, imp, jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26430
Currently, the only thing that prevents a functioning 64-bit FICL build is
a few integer types that were intended to be fixed-width.
Changing them to C99 integer types allows building a functioning 64-bit
FICL.
While this isn't applicable to the default settings of any in-tree loaders,
it is necessary for a future Petitboot loader, due to the requirement that
it be compiled as a 64-bit program.
Reviewed by: tsoome, imp (earlier revision)
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26364
This would allow interested parties to do experimental runs with an
environment set appropriately to raise all the warnings throughout the
build; e.g. env WARNS=6 NO_WERROR=yes buildworld.
Not currently touching the numerous instances in ^/tools.
MFC after: 1 week
When building the loader an unneeded .interp section may be added. Move
this to the unused section region so offsets of used sections don't
change.
Obtained from: CheriBSD
Sponsored by: Innovate UK
A bug in the EFI HTTP driver of TianoCore EDK2 causes memory
corruption when an http instance that uses tls is reconfigured,
leading to a crash.
Work around this by forcing a new http instance for each request
instead of reconfiguring the existing one.
The upstream bug report is https://bugzilla.tianocore.org/show_bug.cgi?id=1917
Submitted by: bcran
Reviewed By: imp, kevans, tsoome
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21281
Adjust a couple of printf() lines that deal with dumping out addresses
to cast to uintmax_t.
This allows building a 64-bit libofw for use in things like a future
Petitboot loader for PowerPC64, and other FDT platforms that require
a 64-bit loader binary and want to use forth.
Sponsored by: Tag1 Consulting, Inc.
OZFS is the top of the OpenZFS tree (aka src/sys/contrib/openzfs).
ZFSOSSRC is the path to the OepnZFS sources
ZFSOSINC is the path to the OepnZFS includes
MFC After: 3 days
Move hexdump from stand/common/misc.c to stand/libsa/hexdump.c
(svn cp)
Disable use of pager - causes linking issue for boot1
can be re-enabled by defining HEXDUMP_PAGER.
Reviewed by: stevek, imp
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D26235
Some external code requires a specific set of include paths to work
properly since it emulates the typical environment the code is used
in. Enable this by creating a CFLAGS_EARLY.file variable that can be
used to build this stack. Otherwise the include stack we build for
stand programs may get in the way. Code that uses this feature has to
tolerate the normal stack of inclues being last on the list (and
presumably unused), though.
Generally, it it should only be used for the specific include
directories. Defines and that sort of thing should be done in the
normal CFLAGS variable. There is a global CFLAGS_EARY hook as well for
everything in a Makefile.
Please note that neither zstd nor encryption is
supported by the loader at this instant. This
change makes it safe to use those features in
one's root pool, but not in one's root dataset.
This is a change in preparation for stopping to use lorder.sh (D26044) and
instead assume that we have a linker newer than ~1990. Without lorder.sh
duplicates end up being passed to the linker when building .so files and this
can result in duplicate symbol definition errors.
There is one minor change: libcompiler_rt.a will no longer provide
gcc_personality_v0 and instead we now only have it in libgcc_eh.a/libgcc_s.so.
This matches GCC's behaviour.
Reviewed By: emaste, cem
Differential Revision: https://reviews.freebsd.org/D26042
than command in the loader.conf, the latter needs to be nul terminated,
otherwise garbage trailer left from zfs_nextboot() will be passed to
parse_cmd() together with loader.conf command.
While here, reset cmd to empty string if read() returns error.
Reviewed by: tsoome
It can be useful to know what type of machine we are running on for desktop
related thing.
It also allow us to support all the DMI variable that linux driver can fetch.
MFC after: 1 week
Sponsored by: Sponsored-by: The FreeBSD Foundation
The checkpoints are another way of keeping the state of ZFS.
During the rewind, the pool has to be exported.
This makes checkpoints unusable when using ZFS as root.
Add the option to rewind the ZFS checkpoint at the boot time.
If checkpoint exists, a new option for rewinding a checkpoint will appear in
the bootloader menu.
We fully support boot environments.
If the rewind option is selected, the boot loader will show a list of
boot environments that existed before the checkpoint.
Reviewed by: tsoome, allanjude, kevans (ok with high-level overview)
Differential Revision: https://reviews.freebsd.org/D24920
When building on macOS with sh==zsh, newvers.sh was producing an
unterminated string literal due to \\n being turned as a newline. Fix this
by using a here document instead.
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D26036
Since the make variable STRIP is already used for other purposes, this
uses STRIPBIN (which is also used for the same purpose by install(1).
This allows using LLVM objcopy to strip binaries instead of the in-tree
elftoolchain objcopy. We make use of this in CheriBSD since passing
binaries generated by our toolchain to elftoolchain strip sometimes results
in assertion failures.
This allows working around https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=248516
by specifying STRIPBIN=/path/to/llvm-strip
Obtained from: CheriBSD
Reviewed By: emaste, brooks
Differential Revision: https://reviews.freebsd.org/D25988
Fix typo in interp_include() invocation (missing 'p')
Remove setting tftpip, as servip is used by the tftp code in libsa. There
is no separate tftpip global variable any more.
Obtained from: Juniper Networks, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25897
On RISC-V, Clang warns with:
cast to smaller integer type 'unsigned int' from 'void (*)(void *)'
Instead, use %p as the standard format specifier for printing pointers.
Whilst Arm's pointer size is the same as unsigned, it's still cleaner to
use the right thing there too.
Reviewed by: brooks (mentor), emaste
Approved by: brooks (mentor), emaste
Differential Revision: https://reviews.freebsd.org/D25718
I made an attempt to fix this in r362978, but all it really did was
confine the issue to the $MACHINE_CPUARCH == "riscv" case. The real
problem is that LINKER_FEATURES is not defined here, so bsd.linker.mk
needs to be included.
This error with cleandir only occurs when META_MODE is disabled, which
explains why it was missed by both CI and myself.
Note that this effectively reverts r362978.
Reported by: mjg
Reviewed by: imp, kevans (in IRC)
The origin text was: "Syntax for devices is odd."
That is not very helpful.
PR: 199103
Reviewed by: kevans, tsoome
Sponsored by: Klara Inc.
Event: July 2020 Bugathon
Differential Revision: https://reviews.freebsd.org/D25629
Correct a small mistake in r363060's backaout of r362998 by reverse-applying
r362998 by hand to loader.conf.
Differential Revision: https://reviews.freebsd.org/D25606
