- VBE 3.0 says palette format resets to 6-bit mode when video mode changes.
We simply set 8-bit mode when we switch modes if the adapter supports it.
- VBE 3.0 also says if the mode is not VGA compatible, we must use VBE
function to save/restore palette. Otherwise, VGA function may be used.
Thus, reinstate the save/load palette functions only for non-VGA compatible
modes regardless of its palette format.
- Let vesa(4) set VESA modes even if vga(4) claims to support it.
- Reset default palette if VESA pixel mode is set initially.
- Fix more style nits.
- Tear down the interrupt handler before killing the worker thread.
- Do geom withering as GEOM event to avoid acquiring the GEOM topology
lock under Giant.
PR: kern/104079
Reviewed by: joerg
Approved by: trasz (mentor)
This improvements aims for avoiding further cache-misses in scheduler
specific functions which need to keep track of average thread running
time and further locking in places setting for this flag.
Reported by: jeff (originally), kris (currently)
Reviewed by: jhb
Tested by: Giuseppe Cocomazzi <sbudella at email dot it>
prepared bytes and next portion of transfer, inner loop of kern_sendfile()
aborts, not preparing next mbuf for socket buffer, and not modifying
any outer loop invariants. The thread loops in the outer loop forever.
Instead of breaking from inner loop, prepare only bytes that fit into
the socket buffer space.
In collaboration with: pho
Reviewed by: bz
PR: kern/138999
MFC after: 2 weeks
- Rework timeout handling, to make it more graceful for devices sharing
controller port (with PMP). Wait for other commands completion/timeout
before initiating recovery.
- Handle timeouts and fatal errors with port hard-reset. The rest of
recovery will be done by XPT on receiving async event. More gracefull
per-device soft-reset recovery can be implemented later.
- Handle timeouts and fatal errors with port hard-reset. The rest of
recovery will be done by XPT on receiving async event. More gracefull
per-device soft-reset recovery can be implemented later.
- Add workaround for ATI SB600/SB700 PMP probe related bug, to speedup boot.
disk is first probed. dagetcapacity is called whenever the disk is opened from
geom via d_open(), a zero sector size will cause geom to panic later on.
Most of the pieces came from Marius- correct settings for channels
and resource management. The one piece missing was that you cannot
for SBus cards replace 32 bit operations with A64 operations- not
supported.
Submitted by: marius
MFC after: 3 days
reacquiring driver lock in Rx handler. re(4) drops a driver lock
before passing received frame to upper stack and reacquire the
lock. During the time window ioctl calls could be executed and if
the ioctl was interface down request, driver will stop the
controller and free allocated mbufs. After that when driver comes
back to Rx handler again it does not know what was happend so it
could access free mbufs which in turn cause panic.
Reported by: Norbert Papke < npapk <> acm dot org >
Tested by: Norbert Papke < npapk <> acm dot org >
from tuning(7). One of the descriptions references tuning(7) because
it is too complex to adequatly describe here (it is not a simple
boolean sysctl) and users should be warned to that.
Reviewed by: alc, kib
Approved by: gnn (mentor)
- Don't write actual length if the actual length pointer is NULL [2]
- correct Linux Compatibility error codes for short isochronous IN transfers
and make status field signed.
Submitted by: Leunam Elebek [1], Manuel Gebele [2]
Fix reference counting bug, when device unreferenced before then
invalidated. To do it, do not handle validity flag as another
reference, but explicitly modify reference count each time flag is
modified.
Discovered by: thompsa
o Move all code into a single file for easier maintenance.
o Use a single global lock to avoid having to handle either
multiple locks or race conditions.
o Make sure to disable the high FP registers after saving
or dropping them.
o use msleep() to wait for the other CPU to save the high
FP registers.
This change fixes the high FP inconsistency panics.
A single global lock typically serializes too much, which may
be noticable when a lot of threads use the high FP registers,
but in that case it's probably better to switch the high FP
context synchronuously. Put differently: cpu_switch() should
switch the high FP registers if the incoming and outgoing
threads both use the high FP registers.
the current value of its argument before atomically replacing it, which
could occasionally return the wrong value on an SMP system. This resulted
in user mutex operations hanging when using threaded applications.
version of this file. When a process forks, any wired pages are immediately
copied because copy-on-write is not supported for wired pages. In other
words, the child process is given its own private copy of each wired page
from its parent's address space. Unfortunately, to date, these copied pages
have been mapped into the child's address space with the wrong permissions,
typically VM_PROT_ALL. This change corrects the permissions.
Reviewed by: kib
do support 64bit addresses, the current SCRIPTS code supports only 32bit
addresses causing data corruption for buffer addresses >4GB. This problem
affects 64bit machines with more than 4GB RAM or amd64 with 4GB and
memory hole remapping.
Work-around this problem with a bus_dma tag that requests bounce-buffers
for addresses >4GB. This causes some overhead, but given the maximum SCSI
bus speed of 160MB/s compared, the effect should hardly be noticeable.
The problem was reported by Mike Watters (mike at mwatters net) who also
verified that this fix cures the problem.
Since this change is a NOOP on systems with less than 4GB RAM and fixes
data corruption (in RAM and on disk) on systems with more than 4GB, I hope
that this change is accepted for 8.0.
MFC after: 3 days (pending approval)
- Remove most of direct relations between ATA(4) peripherial and controller
levels. It makes logic more transparent and is a mandatory step to wrap
ATA(4) controller level into ATA-native CAM SIM.
- Tune AHCI and SATA2 SiI drivers memory allocation a bit to allow bigger
I/O transaction sizes without additional cost.
- Reduce code duplication in ATA XPT and PMP driver.
- Move PIO size setting from ada driver to ATA XPT. It is XPT business
to negotiate transfer details. ada driver is now stateless.
- Report PIO size to SIM. It is required for correct PATA SIM operation.
- Tune PMP scan timings. It workarounds some problems with SiI.
- If reset hapens during PMP initialization - restart it.
- Introduce early-initialized periph drivers, which are used during initial
scan process. Use it for xpt, probe, aprobe and pmp. It gives pmp chance
to finish scan before mountroot and numerate devices in right order.
There is no need to use the lower 4 bits of the unit number to store the
device type number. Just use 0 and 1 to distinguish them. devfs also
guarantees that there can never be an open call on a device that has a
unit number different to 0 and 1, so there is no need to check for this
in open().
d_uid, d_gid and d_mode are unused, because permissions are stored in
cdevpriv nowadays. d_kind doesn't seem to be used at all. We no longer
keep a list of cdevsw's, so d_list is also unused.
uid_t and gid_t are 32 bits, but mode_t is 16 bits, Because of alignment
constraints of d_kind, we can safely turn it into three 32-bit integers.
d_kind and d_list is equal in size to three pointers.
Discussed with: kib
Ensure target/lun passed from user-level supported on this bus.
Scanning unsupported IDs causes different issues from duplicate
devices to system crash.
zfs_access() instead of vaccess() in this case as well.
- If VADMIN is specified with another V* flag (unlikely) call both
zfs_access() and vaccess() after spliting V* flags.
This fixes "dirtying snapshot!" panic.
PR: kern/139806
Reported by: Carl Chave <carl@chave.us>
In co-operation with: jh
MFC after: 3 days
- Don't bother to assign vb until we know we have enough space
- Add variables for sx2, sy2, dx2, dy2 so that these aren't
calculated over and over, also reduce chance of errors.
- Use switch to assign color/format
MFC after: 3 days
- We don't need to check malloc return values with M_WAITOK
- remove variables that we don't really need
- cleanup the error paths by just calling drm_sg_cleanup()
- fix drm_sg_cleanup() to be safe to call at any time
MFC after: 2 weeks
lock and curproc->p_sigacts->ps_mtx. Reschedule_signals may need to have
ps_mtx locked to decide and wakeup a thread, causing recursion on the
mutex.
Inform kern_sigprocmask() and reschedule_signals() about lock state
of the ps_mtx by new flag SIGPROCMASK_PS_LOCKED to avoid recursion.
Reported and tested by: keramida
MFC after: 1 month
