Commit Graph

183 Commits

Author SHA1 Message Date
Yoshinobu Inoue
0fea3d5165 IPv6 multicast routing.
kernel IPv6 multicast routing support.
  pim6 dense mode daemon
  pim6 sparse mode daemon
  netstat support of IPv6 multicast routing statistics

  Merging to the current and testing with other existing multicast routers
  is done by Tatsuya Jinmei <jinmei@kame.net>, who writes and maintainances
  the base code in KAME distribution.

  Make world check and kernel build check was also successful.
2000-01-28 05:10:56 +00:00
Yoshinobu Inoue
4dd8b5ab79 another tcp apps IPv6 updates.(should be make world safe)
ftp, telnet, ftpd, faithd
  also telnet related sync with crypto, secure, kerberosIV

Obtained from: KAME project
2000-01-27 09:28:38 +00:00
Jeroen Ruigrok van der Werven
6e67d5c900 Stop apmconf from being build.
green integrated apmconf into apm and we should use that instead.

Suggested by:	msmith
2000-01-23 09:50:10 +00:00
Bill Paul
261b9b3066 Add driver support for the Aironet 4500/4800 series wireless 802.11
NICs. (Finally!) The PCMCIA, ISA and PCI varieties are all supported,
though only the ISA and PCI ones will work on the alpha for now.
PCCARD, ISA and PCI attachments are all provided. Also provided an
ancontrol(8) utility for configuring the NIC, man pages, and updated
pccard.conf.sample. ISA cards are supported in both ISA PnP and hard-wired
mode, although you must configure the kernel explicitly to support the
hardwired mode since you have to know the I/O address and port ahead
of time.

Special thanks to Doug Ambrisko for doing the initial newbus hackery
and getting it to work in infrastructure mode.
2000-01-14 20:41:03 +00:00
Søren Schmidt
6d73a68a82 Add burncd to and remove wormcontrol from the targets. 2000-01-06 22:52:20 +00:00
Yoshinobu Inoue
9a4365d0e0 libipsec and IPsec related apps. (and some KAME related man pages)
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
2000-01-06 12:40:54 +00:00
Peter Wemm
7432ff8602 Add mailwrapper. It redirects to sendmail by default, but you can
point /usr/sbin/sendmail to any mailer of your choice with the
/etc/mail/mailer.conf config file.
1999-12-29 18:44:06 +00:00
Yoshinobu Inoue
be01371dfa Sorry, ndp command is not exist yet.
Specified by: Anders Andersson <anders@sanyusan.se>
1999-12-29 12:53:21 +00:00
Yoshinobu Inoue
123689d38f Forgot to add newly added udp and raw IPv6 apps to usr.sbin SUBDIR.
They are confirmed to be buildable and seems to be working.
1999-12-29 07:11:50 +00:00
Peter Wemm
32591efd04 Zap kvm_mkdb, it was for kvm_nlist's benefit, but now it goes direct
to the in-kernel hashed symbol tables (including modules).
1999-12-27 07:27:50 +00:00
Yoshinobu Inoue
6a800098cc IPSEC support in the kernel.
pr_input() routines prototype is also changed to support IPSEC and IPV6
chained protocol headers.

Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
1999-12-22 19:13:38 +00:00
Ollivier Robert
ad1e418043 Bye bye xntpd, enter ntp.
Reviewed by:	phk
1999-12-16 12:42:09 +00:00
Guido van Rooij
46eae78a17 Move basic ifilter utils to sbin where they shold have been committed by
me in the first place. While we're at it: add MAINTAINER line
1999-12-06 20:50:04 +00:00
Peter Wemm
44248f451c Reactivate bind (named and tools) 1999-11-30 06:22:22 +00:00
Peter Wemm
fe6d3fe571 Move named and associated tools into a seperate makefile section and
disable them pending an import and cleanup of bind 8.2.2.p5.
1999-11-30 02:18:13 +00:00
Poul-Henning Kamp
7a6f9bb483 Remove bad144 program. 1999-11-27 14:35:22 +00:00
Guido van Rooij
fceb9c0ed8 rewire userland ipfilter programs 1999-11-23 21:57:29 +00:00
Matthew Dillon
c69a34d486 Add rpc.umntall utility, to be used by startup and shutdown scripts
to replace (broken) umntall signal code previously in mountd.

Submitted by:	Martin Blapp <mb@imp.ch>
1999-11-21 08:06:00 +00:00
Doug Rabson
c7805c6325 Enable mixer on alpha. 1999-11-13 18:34:22 +00:00
Julian Elischer
4cf49a4355 Whistle's Netgraph link-layer (sometimes more) networking infrastructure.
Been in production for 3 years now. Gives Instant Frame relay to if_sr
and if_ar drivers, and PPPOE support soon. See:
ftp://ftp.whistle.com/pub/archie/netgraph/index.html
for on-line manual pages.

Reviewed by: Doug Rabson (dfr@freebsd.org)
Obtained from:  Whistle CVS tree
1999-10-21 09:06:11 +00:00
Bill Fumerola
24ff9bb509 mergemaster bmake glue. 1999-10-20 07:33:09 +00:00
Peter Wemm
bd3c4bb29f Nuke the old antique copy of ipfilter from the tree. This is old enough
to be dangerous.  It will better serve us as a port building a KLD,
ala SKIP.
1999-10-10 15:08:38 +00:00
Peter Wemm
97d92980a9 $Id$ -> $FreeBSD$ 1999-08-28 01:35:59 +00:00
Matt Jacob
18443fbd98 Some floppy related commands (fdformat, fdwrite, fdcontrol) need not be
restricted to i386.
1999-08-10 01:04:11 +00:00
Stefan Eßer
2b51223f01 Activate building of elf2exe for MACHINE_ARCH==alpha. 1999-07-28 20:16:49 +00:00
Robert Nordier
0277da1675 Activate kgzip. 1999-07-19 20:22:44 +00:00
Mitsuru IWASAKI
07c279cd0d Activate apmd. 1999-07-10 17:44:02 +00:00
Doug Rabson
accaf17a2a Port pnpinfo to alpha. 1999-05-22 17:35:48 +00:00
David E. O'Brien
ce68c9929a Move sysctl/ to src/sbin/ where it now belongs.
Repository copied by:	Peter
1999-05-10 10:17:22 +00:00
Bill Paul
31a08ab08e Add device driver support for the Lucent WaveLAN/IEEE 802.11 PCMCIA
adapter (and some workalikes). Also add man pages and a wicontrol
utility to manipulate some of the card parameters.

This driver was written using information gleaned from the Lucent HCF Light
library, though it does not use any of the HCF Light code itself, mainly
because it's contaminated by the GPL (but also because it's pretty gross).
The HCF Light lacks certain featurs from the full (but proprietary) HCF
library, including 802.11 frame encapsulation support, however it has
just enough register information about the Hermes chip to allow someone
with enough spare time and energy to implement a proper driver. (I would
have prefered getting my hands on the Hermes manual, but that's proprietary
too. For those who are wondering, the Linux driver uses the proprietary
HCF library, but it's provided in object code form only.)

Note that I do not have access to a WavePOINT access point, so I have
only been able to test ad-hoc mode. The wicontrol utility can turn on
BSS mode, but I don't know for certain that the NIC will associate with
an access point correctly. Testers are encouraged to send their results
to me so that I can find out if I screwed up or not.
1999-05-05 07:37:11 +00:00
Poul-Henning Kamp
75c1354190 This Implements the mumbled about "Jail" feature.
This is a seriously beefed up chroot kind of thing.  The process
is jailed along the same lines as a chroot does it, but with
additional tough restrictions imposed on what the superuser can do.

For all I know, it is safe to hand over the root bit inside a
prison to the customer living in that prison, this is what
it was developed for in fact:  "real virtual servers".

Each prison has an ip number associated with it, which all IP
communications will be coerced to use and each prison has its own
hostname.

Needless to say, you need more RAM this way, but the advantage is
that each customer can run their own particular version of apache
and not stomp on the toes of their neighbors.

It generally does what one would expect, but setting up a jail
still takes a little knowledge.

A few notes:

   I have no scripts for setting up a jail, don't ask me for them.

   The IP number should be an alias on one of the interfaces.

   mount a /proc in each jail, it will make ps more useable.

   /proc/<pid>/status tells the hostname of the prison for
   jailed processes.

   Quotas are only sensible if you have a mountpoint per prison.

   There are no privisions for stopping resource-hogging.

   Some "#ifdef INET" and similar may be missing (send patches!)

If somebody wants to take it from here and develop it into
more of a "virtual machine" they should be most welcome!

Tools, comments, patches & documentation most welcome.

Have fun...

Sponsored by:   http://www.rndassociates.com/
Run for almost a year by:       http://www.servetheweb.com/
1999-04-28 11:38:52 +00:00
David E. O'Brien
0acc1823a4 \begin{bdemode}
sort tcpd* entries
\end{bdemode}
1999-04-28 08:00:50 +00:00
Mike Smith
0adc9d60f1 Build memcontrol too. 1999-04-07 04:12:02 +00:00
Mark Murray
8d4b20e333 Build tcp_wrappers' userland. I am not building tcpd, because in a day
or two, inetd will gain the necessary functionality. At that stage,
I'll make wrapping the default for sendmail and portmapper as well.
1999-03-14 18:02:14 +00:00
Brian Somers
2f9a9cb08c src/usr.sbin/natd -> src/sbin/natd (after a repo-copy by jdp) 1999-03-12 15:38:55 +00:00
Robert Nordier
5051d0ac60 Activate boot0cfg. 1999-02-21 21:30:13 +00:00
Mike Smith
b6c9912866 Back out 1.146 - usbd is already enabled. 1999-01-11 18:03:54 +00:00
Mike Smith
66d08b5f0c Add usbd to the build 1999-01-11 08:06:04 +00:00
Nick Hibma
7c0a08f381 Added usbd and usbdevs 1999-01-10 21:57:55 +00:00
Peter Wemm
cc85444017 Reconnect pcvt hooks..
Reviewed by:	core
1999-01-01 08:45:44 +00:00
Poul-Henning Kamp
4b14c4dc97 spppcontrol already lives in /sbin 1998-12-30 09:38:36 +00:00
Gary Palmer
a0f1d841a5 Put the i4b stuff under the `i386 only' section until someone fixes up
the build problems on the Alpha.
1998-12-28 16:37:28 +00:00
Poul-Henning Kamp
19c749625f Initial entry of ISDN4BSD into the FreeBSD tree.
ISDN4BSD is the work of our brand-new comitter: Hellmuth Michaelis,
who has done a tremendous amount of work to bring us this far.

There are still some outstanding issues and files to bring into
the tree, and for now it will be needed to pick up all the extra
docs from the isdn4bsd release.

It is probably also a very good idea to subscribe to the isdn@freebsd.org
mailing list before you try this out.

These files correspond to release "beta Version 0.70.00 / December
1998" from Hellmuth.
1998-12-27 21:47:14 +00:00
Poul-Henning Kamp
57814d04d4 Update sppp support to i4b level. This includes the new spppcontrol
program to set PPP options like authentication with.
1998-12-27 21:30:44 +00:00
Poul-Henning Kamp
1767866e4d follow up to:
Pre 3.0 branch cleanup casualty #4: pcvt
1998-12-27 16:44:24 +00:00
Nick Hibma
6015b10bca Unbreak make world. Sorry about that. I'll have to figure out the steps
to add those programs properly.
1998-12-13 14:56:19 +00:00
Nick Hibma
00074f8e84 Added usbd, usbdevs directories
Submitted by:	MIHIRA Sanpei Yoshiro
1998-12-12 11:47:31 +00:00
Bruce Evans
3c817e2cc4 Fixed disorder. 1998-11-10 12:29:04 +00:00
Dima Ruban
ffd2f8ac3d Enable IPXrouted for alpha. 1998-11-10 06:38:40 +00:00
Dima Ruban
5c9036d5ee Clean it up a little bit. 1998-11-09 23:39:02 +00:00