- Introducing the possibility of using locks different than mutexes
for the knlist locking. In order to do this, we add three arguments to
knlist_init() to specify the functions to use to lock, unlock and
check if the lock is owned. If these arguments are NULL, we assume
mtx_lock, mtx_unlock and mtx_owned, respectively.
- Using the vnode lock for the knlist locking, when doing kqueue operations
on a vnode. This way, we don't have to lock the vnode while holding a
mutex, in filt_vfsread.
Reviewed by: jmg
Approved by: re (scottl), scottl (mentor override)
Pointyhat to: ssouhlal
Will be happy: everyone
guard against NULL t_modem entry. Otherwise, driver doesn't have t_modem
callback implemented(such like sys/dev/usb/ucycom.c) would panic when
someone opens the driver's associated tty device.
Reviewed by: phk, sam (mentor)
- Have TS_ZOMBIE ttys return POLLHUP instead of POLLERR
- Remove unneeded POLLWRNORM (old bug)
- TS_ZOMBIE ttys will set POLLIN and POLLRDNORM
- Do not call selrecord in TS_ZOMBIE ttys
PR: kern/73821
Reviewed by: bde
MFC after: 4 weeks
modes on a tty structure.
Both the ".init" and the current settings are initialized allowing
the function to be used both at attach and open time.
The function takes an argument to decide if echoing should be enabled.
Echoing should not be enabled for regular physical serial ports
unless they are consoles, in which case they should be configured
by ttyconsolemode() instead.
Use the new function throughout.
the raw values including for child process statistics and only compute the
system and user timevals on demand.
- Fix the various kern_wait() syscall wrappers to only pass in a rusage
pointer if they are going to use the result.
- Add a kern_getrusage() function for the ABI syscalls to use so that they
don't have to play stackgap games to call getrusage().
- Fix the svr4_sys_times() syscall to just call calcru() to calculate the
times it needs rather than calling getrusage() twice with associated
stackgap, etc.
- Add a new rusage_ext structure to store raw time stats such as tick counts
for user, system, and interrupt time as well as a bintime of the total
runtime. A new p_rux field in struct proc replaces the same inline fields
from struct proc (i.e. p_[isu]ticks, p_[isu]u, and p_runtime). A new p_crux
field in struct proc contains the "raw" child time usage statistics.
ruadd() has been changed to handle adding the associated rusage_ext
structures as well as the values in rusage. Effectively, the values in
rusage_ext replace the ru_utime and ru_stime values in struct rusage. These
two fields in struct rusage are no longer used in the kernel.
- calcru() has been split into a static worker function calcru1() that
calculates appropriate timevals for user and system time as well as updating
the rux_[isu]u fields of a passed in rusage_ext structure. calcru() uses a
copy of the process' p_rux structure to compute the timevals after updating
the runtime appropriately if any of the threads in that process are
currently executing. It also now only locks sched_lock internally while
doing the rux_runtime fixup. calcru() now only requires the caller to
hold the proc lock and calcru1() only requires the proc lock internally.
calcru() also no longer allows callers to ask for an interrupt timeval
since none of them actually did.
- calcru() now correctly handles threads executing on other CPUs.
- A new calccru() function computes the child system and user timevals by
calling calcru1() on p_crux. Note that this means that any code that wants
child times must now call this function rather than reading from p_cru
directly. This function also requires the proc lock.
- This finishes the locking for rusage and friends so some of the Giant locks
in exit1() and kern_wait() are now gone.
- The locking in ttyinfo() has been tweaked so that a shared lock of the
proctree lock is used to protect the process group rather than the process
group lock. By holding this lock until the end of the function we now
ensure that the process/thread that we pick to dump info about will no
longer vanish while we are trying to output its info to the console.
Submitted by: bde (mostly)
MFC after: 1 month
the new subr_unit.c code.
For now assert Giant in ttycreate() and ttyfree(). It is not obvious that
it will ever pay off to lock these with anything else.
generic way. This code will allow a similar amount of code to be
removed from most if not all serial port drivers.
Add generic cdevsw for tty devices.
Add generic slave cdevsw for init/lock devices.
Add ttypurge function which wakes up all know generic sleep
points in the tty code, and calls into the hw-driver if it
provides a method.
Add ttycreate function which creates tty device and optionally
cua device. In both cases .init/.lock devices are created
as well.
Change ttygone() slightly to also call the hw driver provided
purge routine.
Add ttyfree() which will purge and destroy the cdevs.
Add ttyconsole mode for setting console friendly termios
on a port.
most if not all of our tty drivers in the future.
Centralizing this stuff enables us to remove about 100 lines of
almost but not quite perfectly copy&paste code from each tty driver.
a more complete subsystem, and removes the knowlege of how things are
implemented from the drivers. Include locking around filter ops, so a
module like aio will know when not to be unloaded if there are outstanding
knotes using it's filter ops.
Currently, it uses the MTX_DUPOK even though it is not always safe to
aquire duplicate locks. Witness currently doesn't support the ability
to discover if a dup lock is ok (in some cases).
Reviewed by: green, rwatson (both earlier versions)
future:
rename ttyopen() -> tty_open() and ttyclose() -> tty_close().
We need the ttyopen() and ttyclose() for the new generic cdevsw
functions for tty devices in order to have consistent naming.
copies.
No current line disciplines have a dynamically changing hotchar, and
expecting to receive anything sensible during a change in ldisc is
insane so no locking of the hotchar field is necessary.
we have to revert to TTYDISC which we know will successfully open
rather than try the previous ldisc which might also fail to open.
Do not let ldisc implementations muck about with ->t_line, and remove
code which checks for reopens, it should never happen.
Move ldisc->l_hotchar to tty->t_hotchar and have ldisc implementation
initialize it in their open routines. Reset to zero when we enter
TTYDISC. ("no" should really be -1 since zero could be a valid
hotchar for certain old european mainframe protocols.)
Add two new functions: ttyref() and ttyrel(). ttymalloc() creates a struct
tty with a reference count of one. when ttyrel sees the count go to zero,
struct tty is freed.
Hold references for open ttys and for ttys which are controlling terminal
for sessions.
Until drivers start using ttyrel(), this commit will make no difference.
called ttyldoptim().
Use this function from all the relevant drivers.
I belive no drivers finger linesw[] directly anymore, paving the way for
locking and refcounting.
Add missing D_TTY flags to various drivers.
Complete asserts that dev_t's passed to ttyread(), ttywrite(),
ttypoll() and ttykqwrite() have (d_flags & D_TTY) and a struct tty
pointer.
Make ttyread(), ttywrite(), ttypoll() and ttykqwrite() the default
cdevsw methods for D_TTY drivers and remove the explicit initializations
in various drivers cdevsw structures.
- Rename temporary variable names ("tmp", "tmp2") to more informative
names ("load", "pctcpu", "rss", ...)
- Unclutter indentation and return paths: rather than lots of nested
ifs, simply return earlier if it's not going to work out. Simplify
general structure and avoid "deep" code.
- Comment on the thread/process selection and locking.
- Correct handling of "running"/"runnable" states, avoid "unknown"
that people were seeing for running processes. This was due to
a misunderstanding of the more complex state machine / inhibitors
behavior of KSE.
- Do perform ttyinfo() printing on KSE (P_SA) processes, it seems
generally to work.
While I initially attempted to formulate this as two commits (one
layout, the other content), I concluded that the layout changes were
really structural changes.
Many elements submitted by: bde
in slightly less usual states:
If the thread is on a run queue, display "running" if the thread is
actually running, otherwise, "runnable".
If the thread is sleeping, and it's on a sleep queue, display the
name of the queue, otherwise "unknown" -- previously, in this situation
we would display "iowait".
If the thread is waiting on a lock, display *lockname.
If the thread is suspended, display "suspended" -- previously, in
this situation we would display "iowait".
If the thread is waiting for an interrupt, display "intrwait" --
previously, in this situation we would display "iowait".
If the thread is in a state not handled by the above, display
"unknown" -- previously, we would print "iowait".
Among other things, this avoids displaying "iowait" when the foreground
process turns out to be suspended waiting for a debugger to properly
attach.
thread being waken up. The thread waken up can run at a priority as
high as after tsleep().
- Replace selwakeup()s with selwakeuppri()s and pass appropriate
priorities.
- Add cv_broadcastpri() which raises the priority of the broadcast
threads. Used by selwakeuppri() if collision occurs.
Not objected in: -arch, -current
TIOCCONS console (e.g. xconsole) via a timeout routine instead of
calling into the tty code directly from printf(). This fixes a
number of cases where calling printf() at the wrong time (such as
with locks held) would cause a panic if xconsole is running.
The TIOCCONS message buffer is 8k in size by default, but this can
be changed with the kern.consmsgbuf_size sysctl. By default, messages
are checked for 5 times per second. The timer runs and the buffer
memory remains allocated only at times when a TIOCCONS console is
active.
Discussed on: freebsd-arch
