instead of old "ignore-and-return 0" in r287789. This broke arp -da /
ndp -cn behavior (they exit on rtsock command failure). Fix this by
translating LLE_IFADDR to RTM_PINNED flag, passing it to userland and
making arp/ndp ignore these entries in batched delete.
MFC after: 2 weeks
These are only handled as 'build-tools' in Makefile.inc1. This causes
'make clean' from the top of the tree to not clean the directories. It also
effectively has kept them disconnected and risks them bitrotting. The
buildworld process never cleans them either.
Connect them so they will always be built, cleaned, etc, but never installed.
Discussed with: imp (briefly)
Sponsored by: EMC / Isilon Storage Division
ndiscvt uses 16 entry array for words into which it parses
comma-separated lists of strings, like AddReg line in
[somesection]
AddReg = foo.reg, bar.reg, baz.reg, quiz.reg
Overflows were not checked so it crashed on a line with 17 words
encountered in some Broadcom/Dell Wireless 1704 802.11b-g-n driver
So extend the array up to 32 entries and add an overflow check.
Reviewed by: bapt
Approved by: bapt
MFC after: 2 weeks
Differential Revision: D3713
- Use NI_MAXHOST-long buffer for getnameinfo().
Although INET6_ADDRSTRLEN was designed to hold the longest
IPv6 address in IPv4-mapped address format a long time ago,
getnameinfo() can return scope identifier in addition to it.
MFC after: 1 day
in -a flag.
- Fix a bug that sockaddr_in was used where sockaddr_in6 should have
been used. This was not actually harmful because offsetof(struct
sockaddr_in, sin_port) is equal to offsetof(struct sockaddr_in6,
sin6_port).
MFC after: 1 day
- Return an error if no matching device is found when the locate command is run
- Enhance the locate command to be able to address drive bays with no disk, or where the SES controller has not made the mapping to the device name
- Added the fault command, similar to locate, but a different SES property. On some of my controllers locate blinks the activity light, others the fault light. The fault command keeps the fault light on constant.
- Improve the usage() output and use it everywhere
- Added the map command, displays all elements connected to each (or the specified) ses(4) controller
- Added the status command, returns the overall status of the ses(4) controller
Reviewed by: wblock (man page, earlier version)
Approved by: bapt (mentor)
MFC after: 3 weeks
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3580
that checksum of vdev label should be checked (which is not done
currently).
No functional change.
While I'm there, raise WARNS to 2.
Reviewed by: allanjude
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D3508
resolvconf.conf so that resolvconf won't replace the manually configured
forwarders with dynamically configured ones the next time the lease is
renewed.
Some more automated I2C controllers cannot explicitly create
START/STOP/etc. conditions on the bus.
Instead, the correct condition is set automatically according
to the pending transfer status.
This particular behavior can cause trouble if some I2C slave
requires sending address offset within the chip followed by
the actual data or command. In that case we cannot assume that
the driver will not STOP immediately after sending
offset.
To avoid that, do not split offset transfer from data transfer
for default transmission modes and do exactly that if requested
in command line (stop-start and repeated-start modes).
This more generic approach should cover special cases like
the one described.
Reviewed by: imp
Submitted by: Marcin Mazurek <mma@semihalf.com>
Obtained from: Semihalf
Mark the user has having been edited if -d option is passed to usermod and
so the request change of home directory actually happen
PR: 203052
Reported by: lenzi.sergio@gmail.com
MFC after: 2 days
at the end of string buffer, and the code context do expects this to behave
correctly (e.g. strchr).
Note that we do not believe there is real-world impact for gstat(8)'s usage
because the strings are length checked, and the on-stack buffer belongs to
main() and we can expect to have zeros in them.
MFC after: 2 weeks
Note that to not interfer with finger print it expects a signature on pkg itself
which is named pkg.txz.pubkeysign
To genrate it:
echo -n "$(sha256 -q pkg.txz)" | openssl dgst -sha256 -sign /thekey \
-binary -out ./pkg.txz.pubkeysig
Note the "echo -n" which prevent signing the '\n' one would get otherwise
PR: 202622
MFC after: 1 week
Given the pciids database on ports is updated more often than the one in base
prefer this version if present, otherwise read the one from base.
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D3391
This is an utility for managing SCSI Enclosure Services (SES) device.
For now only one command is supported "locate" which will change the test of the
external LED associated to a given disk.
Usage if the following:
sesutil locate disk [on|off]
Disk can be a device name: "da12" or a special keyword: "all".
Reviewed by: mav
MFC after: 1 month
Relnotes: yes
Sponsored by: gandi.net
Differential Revision: https://reviews.freebsd.org/D3544
basics. The more complicated cases - like how to use physical
ports - are explained later, in the "EXAMPLES" section.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
go asking what debug flags to set for GEOM to make it work. Advice
them to use gpart(8) instead.
Something similar should probably done with disklabel,
but I need to rewrite the disklabel examples first.
Reviewed by: wblock@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3315
Readd the function to create the parents home directory if it does not exists.
if it is only a directory at the top level of the hierarchy symlink it into /usr
as it used to be done before.
Reported by: kevlo, adrian
Watchdogd currently disables the watchdog when it exits, such as during
rc.shutdown processing. That leaves the system vulnerable to getting hung
or deadlocked during the shutdown part of a reboot. For embedded systems
it's especially important that the hardware watchdog always be active. It
can also be useful for servers that are administered remotely.
The new -x <seconds> option tells watchdogd to program the watchdog with the
given timeout just before exiting. The -x value can be longer or shorter
than the -t normal time value, to allow for various exceptional conditions
at shutdown such as allowing extra time for buffer flushing.
The exit value is also used internally in the "failsafe" handling (which
used to just disable the watchdog), on the theory that if you're using this
option, "safe" means having the watchdog always running, not disabled.
The default is still to disable the watchdog on exit if -x is not specified.
Differential Revision: https://reviews.freebsd.org/D2556 (timed out)
repository signature_type is unsupported by bootstrap pkg(7).
Previously, when signature_type specified an unsupported method,
the bootstrap pkg(7) would proceed like when signature_type is
"none". MITM attackers may be able to use this vulnerability and
bypass validation and install their own versions of pkg(8).
At this time, only fingerprint and none are supported by the
bootstrap pkg(7).
FreeBSD's official pkg(8) repository uses the fingerprint method
and is therefore unaffected.
Errata candidate.
Discussed with: bapt@
Submitted by: Fabian Keil
Obtained from: ElectroBSD
The C library already knows how to lookup eui64 entries from NIS. For
example, fwcontrol(8) does it. But /var/yp/Makefile.dist doesn't build the
eui64 maps, and ypinit(8) doesn't push them to slaves. This change fixes
that.
Reviewed by: brooks, wblock
MFC after: 2 weeks
Sponsored by: SpectraLogic Corp
Differential Revision: https://reviews.freebsd.org/D3404
Its idea was to be a simple initiator and execute several commands from
kernel level, but FreeBSD never had consumer for that functionality,
while its implementation polluted many unrelated places..
characters use the defined constant so that in case of change this
would not break.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D3340
MFC after: 2 weeks
This will help ensure we don't trash file descriptors that get used later on
in the daemon
Found via internal Coverity scan
MFC after: 2 weeks
Discussed with: cem, ed, markj
Differential Revision: https://reviews.freebsd.org/D3081
Submitted by: Miles Ohlrich <miles.ohlrich@isilon.com>
Sponsored by: EMC / Isilon Storage Division
/usr/home/adrian/work/freebsd/head-embedded-2/src/usr.sbin/pw/pw_user.c: In function 'pw_user_next':
/usr/home/adrian/work/freebsd/head-embedded-2/src/usr.sbin/pw/pw_user.c:680: warning: statement with no effect
Now each subcommands checks its arguments in a dedicated functions.
This helps improving input validation, code readability/maintainability
While here:
- Add a -y option to pw userdel/usermod so it can maintain NIS servers if
nispasswd is not defined in pw.conf(5)
- Allow pw -r <rootdir> to remove directory with userdel -r
- Fix bug when renaming a user which was not renaming the user name it groups
it is a member of.
- Only parse pw.conf(5) when needed.
First they are redundant with the tests we currently have on pw(8)
Second they to modify the host database instead of being self contained withing
the test directory
supposed to be manipulated
This prevent pw usermod creating a new local user when requesting to usermod on
a username is defined in LDAP.
This issue only happens when modifying the local user database (not inpacting
commands when -V or -R are used).
PR: 187653
Submitted by: tmwalaszek@gmail.com
This was causing the following error:
rescue
sh: rescue: not found
*** [rescue] Error code 127
make[1]: stopped in /usr/obj/usr/src/rescue/rescue
Sponsored by: EMC / Isilon Storage Division
-HEAD) in libntp so we can make reproducible build.
PR: bin/201661
Reviewed by: gjb, cy, roberto
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D3122
For Lenovo laptops with buggy bios (x220, t420, t520):
Write the 0xee entry into the second slot in the pmbr instead of the first
For some Dell and HP models:
The BIOS gives a warning message when booting in legacy mode from a GPT partitioned disk where the 0xee partition in the pmbr is not flagged active
For models known to have this problem, mark the pmbr active during installation
Use smbios data to identify machines known to be affected by any of the above, and offer the user the option to apply the workaround
In bsdinstall's ufs auto mode (autopart partition wizard):
Allow users to select which type of partition table to use
Keep current defaults: MBR for BIOS, GPT for UEFI
This allows users to choose GPT for legacy boot if they wish
PR: 184910
PR: 194359
Reviewed by: Michael Dexter
Approved by: marcel
MFC after: 3 days
X-MFC-With: r285594
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3091
retval is used to test the return of XML_Parse function which is ok if 1 is
returned and retval it directly returned to the main function and used as an
exit value.
if all the parsing part is done reset retval to 0 so that the command return 0
if everything ok
Differential Revision: https://reviews.freebsd.org/D3102
Reviewed by: trasz
MFC after: 3 days
Sponsored by: gandi.net
strict-aliasing rules.
Declare some variables as statics as well as some functions that are internal
helpers. Update the function broadcast_result() to a post-K&R definition.
Differential Revision: D2690
Reviewed by: rodrigc, dim
A variable was misspelled resulting in chmod executing on the installer instead of on the target chroot
PR: 191402
Submitted by: Martin Simmons <martin@lispworks.com>
Approved by: brueffer
MFC after: 3 days
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3061
Note: currently 'mkver' script is using hardcoded knowledge and always
emits -a in the version string, a more through solution would be to generate
the script with something that we own.
Rewrite rm_r to use *at function, allowing to remove home directories along with
users. only crontabs and at(1) installation are not removed
Relnotes: yes
functions
This allows to simplify the code a bit for -R by not having to keep modifying
path and also prepare the code to improve support -R in userdel
While here, add regression tests for the functionality
Add a new flag, -l, for a clean environment, same as jail(8) exec.clean.
Change the GET_USER_INFO macro into a function.
PR: 201300
Submitted by: Willem Jan Withagen
MFC after: 3 days
