specified. This fixes searching the paths specified in
/usr/local/etc/man.d/*.conf, as currently apropos/whatis from mandoc
suite aren't aware about them.
PR: 227922
Reviewed by: bapt
Approved by: re (gjb), kib (mentor)
Differential Revision: https://reviews.freebsd.org/D17454
elfcopy contained logic to filter individual relocations in STRIP_ALL
mode. However, this is not valid; relocations emitted by the linker are
required, unless they apply to an entire section being removed (which is
handled by other logic in elfcopy).
Note that filter_reloc was also buggy: for RELA relocation sections it
operated on uninitialized rel.r_info resulting in invalid operation.
The logic most likely needs to be inverted: instead of removing
relocations because their associated symbols are being removed, we must
keep symbols referenced by relocations. That said, in practice we do
not encounter this code path today: objects being stripped are either
dynamically linked binaries which retain .dynsym, or static binaries
with no relocations.
Just remove filter_reloc. This fixes certain cases including statically
linked binaries containing ifuncs. Stripping binaries with relocations
referencing removed symbols was already broken, and after this change
may still be broken in a different way.
PR: 232176
Reviewed by: kaiw, kib, markj
Approved by: re (rgrimes)
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17519
ELF spec says that for SHT_REL and SHT_RELA sh_link should reference the
associated string table and sh_info should reference the "section to
which the relocation applies." ELF Tool Chain's elfcopy / strip use
this (in part) to control whether or not the relocation entry is copied
to the output.
LLVM PR 37538 https://bugs.llvm.org/show_bug.cgi?id=37538
Approved by: re (kib)
Obtained from: llvm r344226 (backported for 6.0)
move all elements from the adist_send and adist_recv lists back onto the
adist_free list, but we don't wake consumers waitings for the adist_free list
to become non-empty. This can lead to the sender process stopping audit trail
files distribution and waiting forever.
Fix the problem by adding the missing wakeup.
While here slow down spinning on CPU in case of a short race in
sender_disconnect() and add an explaination when it can occur.
PR: 201953
Reported by: peter
Approved by: re (kib)
file name and opening it. This race was not properly handled, because we were
copying new name before checking for openat(2) error and when we were trying
again we were starting with the next trail file. This could result in skipping
distribution of such a trail file.
Fix this problem by checking for ENOENT first (only for .not_terminated files)
and then updating (or not) tr_filename before restarting the search.
PR: 200139
Reported by: peter
Approved by: re (kib)
libelf maintains two views of endianness: e_byteorder, and
e_ident[EI_DATA] in the ELF header itself. e_byteorder is not always
kept in sync, so use the ELF header endianness to test for mips64el.
PR: 231790
Bisected by: sbruno
Reviewed by: jhb
Approved by: re (kib)
MFC with: r338478
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17380
Previously Clang required ifunc resolution functions to take no
arguments, presumably because GCC documented ifunc resolvers as taking
no arguments. However, GCC accepts resolvers accepting arguments, and
our rtld passes CPU ID information (cpuid, hwcap, etc.) to ifunc
resolvers. Just remove the check from the in-tree compiler for our in-
tree compiler; a different (per-OS) approach may be required upstream.
Reported by: mjg
Approved by: re (rgrimes)
MFC after: 1 week
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
[ELF] - Allow LLD to produce file symbols.
This is for PR36716 and
this enables emitting STT_FILE symbols.
Output size affect is minor:
lld binary size changes from 52,883,408 to 52,949,400
clang binary size changes from 83,136,456 to 83,219,600
Differential revision: https://reviews.llvm.org/D45261
This fixes a regression in lld that made it stop emitting STT_FILE
symbols, which ctfmerge relies upon to uniquify function table entries
that reference STB_LOCAL symbols. Consequently, ctfmerge stopped
emitting entries for static functions into the function table, and
dtrace no longer gets type info for them.
Approved by: re (kib)
Reported by: markj
PR: 230444
MFC after: 3 days
[CodeGen] Initialize large arrays by copying from a global
Currently, clang compiles explicit initializers for array elements
into series of store instructions. For large arrays of built-in types
this results in bloated output code and significant amount of time
spent on the instruction selection phase. This patch fixes the issue
by initializing such arrays with global constants that store the
binary image of the initializer.
Differential Revision: https://reviews.llvm.org/D43181
This should fix a compiler hang (and excessive memory usage) while
building the science/rmg port.
Approved by: re (kib)
Reported by: yuri@tsoft.com
See also: https://bugs.llvm.org/show_bug.cgi?id=38798
MFC after: 3 days
Initialize LiveRegs once in BranchFolder::mergeCommonTails
This should fix '(TRI && "LivePhysRegs is not initialized."' assertions
when building the lang/qt5-qml port in certain configurations.
Approved by: re (kib)
Reported by: Piotr Kubaj <pkubaj@anongoth.pl>
PR: 231355
MFC after: 3 days
the hard-coded string "not available" to ensure reproducible builds.
Discussed with: emaste
Approved by: re (rgrimes)
Sponsored by: The FreeBSD Foundation
Not all libpcap backends use the BPF compatible set
of IOCTLs. For example the mlx5 backend uses libibverbs
which is currently not capsicum compatible.
Disable sandboxing for such backends.
MFC after: 3 days
Discussed with: emaste@
Approved by: re (kib)
Sponsored by: Mellanox Technologies
Update libarchive to 3.3.3
As all important changes have already been merged from libarchive git
this is just version number bump, documentation update and some
polishing for cpio tests. Other source code changes are not relevant to
FreeBSD.
Approved by: re (gjb)
MFC after: 1 week
MIPS64 does not store the 'r_info' field of a relocation table entry as
a 64-bit value consisting of a 32-bit symbol index in the high 32 bits
and a 32-bit type in the low 32 bits as on other architectures. Instead,
the 64-bit 'r_info' field is really a 32-bit symbol index followed by four
individual byte type fields. For big-endian MIPS64, treating this as a
64-bit integer happens to be compatible with the layout expected by other
architectures (symbol index in upper 32-bits of resulting "native" 64-bit
integer). However, for little-endian MIPS64 the parsed 64-bit integer
contains the symbol index in the low 32 bits and the 4 individual byte
type fields in the upper 32-bits (but as if the upper 32-bits were
byte-swapped).
To cope, add two helper routines in gelf_getrel.c to translate between the
correct native 'r_info' value and the value obtained after the normal
byte-swap translation. Use these routines in gelf_getrel(), gelf_getrela(),
gelf_update_rel(), and gelf_update_rela(). This fixes 'readelf -r' on
little-endian MIPS64 objects which was previously decoding incorrect
relocations as well as 'objcopy: invalid symbox index' warnings from
objcopy when extracting debug symbols from kernel modules.
Even with this fixed, objcopy was still crashing when trying to extract
debug symbols from little-endian MIPS64 modules. The workaround in
gelf_*rel*() depends on the current ELF object having a valid ELF header
so that the 'e_machine' field can be compared against EM_MIPS. objcopy
was parsing the relocation entries to possibly rewrite the 'r_info' fields
in the update_relocs() function before writing the initial ELF header to
the destination object file. Move the initial write of the ELF header
earlier before copy_contents() so that update_relocs() uses the correct
symbol index values.
Note that this change should really go upstream. The binutils readelf
source has a similar hack for MIPS64EL though I implemented this version
from scratch using the MIPS64 ABI PDF as a reference.
Discussed with: jkoshy
Reviewed by: emaste, imp
Approved by: re (gjb, kib)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D15734
This matches the name and avoids logging of warnings to console with
default syslog.conf, esp. getting rid of:
warning: /etc/hosts.allow, line ..: can't verify hostname: \
getaddrinfo(.., AF_INET) failed
The current kernel ifunc implementation creates a PLT entry for each
ifunc definition. ifunc calls therefore consist of a call to the
PLT entry followed by an indirect jump. The jump target is written
during boot when the kernel linker resolves R_[*]_IRELATIVE relocations.
This implementation is defined by requirements for userland code, where
text relocations are avoided. This requirement is not present for the
kernel, so the implementation has avoidable overhead (namely, an extra
indirect jump per call).
Address this for now by adding a special option to the static linker
to inhibit PLT creation for ifuncs. Instead, relocations to ifunc call
sites are passed through to the output file, so the kernel linker can
enumerate such call sites and apply PC-relative relocations directly
to the text section. Thus the overhead of an ifunc call becomes exactly
the same as that of an ordinary function call. This option is only for
use by the kernel and will not work for regular programs.
The final form of this optimization is up for debate; for now, this
change is simple and static enough to be acceptable as an interim
solution.
Reviewed by: emaste
Discussed with: arichardson, dim
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16748
ObsoleteFiles.inc:
Remove manual pages for arc4random_addrandom(3) and
arc4random_stir(3).
contrib/ntp/lib/isc/random.c:
contrib/ntp/sntp/libevent/evutil_rand.c:
Eliminate in-tree usage of arc4random_addrandom().
crypto/heimdal/lib/roken/rand.c:
crypto/openssh/config.h:
Eliminate in-tree usage of arc4random_stir().
include/stdlib.h:
Remove arc4random_stir() and arc4random_addrandom() prototypes,
provide temporary shims for transistion period.
lib/libc/gen/Makefile.inc:
Hook arc4random-compat.c to build, add hint for Chacha20 source for
kernel, and remove arc4random_addrandom(3) and arc4random_stir(3)
links.
lib/libc/gen/arc4random.c:
Adopt OpenBSD arc4random.c,v 1.54 with bare minimum changes, use the
sys/crypto/chacha20 implementation of keystream.
lib/libc/gen/Symbol.map:
Remove arc4random_stir and arc4random_addrandom interfaces.
lib/libc/gen/arc4random.h:
Adopt OpenBSD arc4random.h,v 1.4 but provide _ARC4_LOCK of our own.
lib/libc/gen/arc4random.3:
Adopt OpenBSD arc4random.3,v 1.35 but keep FreeBSD r114444 and
r118247.
lib/libc/gen/arc4random-compat.c:
Compatibility shims for arc4random_stir and arc4random_addrandom
functions to preserve ABI. Log once when called but do nothing
otherwise.
lib/libc/gen/getentropy.c:
lib/libc/include/libc_private.h:
Fold __arc4_sysctl into getentropy.c (renamed to arnd_sysctl).
Remove from libc_private.h as a result.
sys/crypto/chacha20/chacha.c:
sys/crypto/chacha20/chacha.h:
Make it possible to use the kernel implementation in libc.
PR: 182610
Reviewed by: cem, markm
Obtained from: OpenBSD
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16760
* correctly prepare a buffer to obtain interface description from a kernel and
truncate long description instead of dropping it altogether and
spamming logs;
* skip calling strlen() for each description and each SNMP request
for MIB-II/ifXTable's ifAlias.
* teach bsnmpd to allocate memory dynamically for interface descriptions
to decrease memory usage for common case and not to break
if long description occurs;
PR: 217763
Reviewed by: harti and others
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16459
