MIPS64 does not store the 'r_info' field of a relocation table entry as
a 64-bit value consisting of a 32-bit symbol index in the high 32 bits
and a 32-bit type in the low 32 bits as on other architectures. Instead,
the 64-bit 'r_info' field is really a 32-bit symbol index followed by four
individual byte type fields. For big-endian MIPS64, treating this as a
64-bit integer happens to be compatible with the layout expected by other
architectures (symbol index in upper 32-bits of resulting "native" 64-bit
integer). However, for little-endian MIPS64 the parsed 64-bit integer
contains the symbol index in the low 32 bits and the 4 individual byte
type fields in the upper 32-bits (but as if the upper 32-bits were
byte-swapped).
To cope, add two helper routines in gelf_getrel.c to translate between the
correct native 'r_info' value and the value obtained after the normal
byte-swap translation. Use these routines in gelf_getrel(), gelf_getrela(),
gelf_update_rel(), and gelf_update_rela(). This fixes 'readelf -r' on
little-endian MIPS64 objects which was previously decoding incorrect
relocations as well as 'objcopy: invalid symbox index' warnings from
objcopy when extracting debug symbols from kernel modules.
Even with this fixed, objcopy was still crashing when trying to extract
debug symbols from little-endian MIPS64 modules. The workaround in
gelf_*rel*() depends on the current ELF object having a valid ELF header
so that the 'e_machine' field can be compared against EM_MIPS. objcopy
was parsing the relocation entries to possibly rewrite the 'r_info' fields
in the update_relocs() function before writing the initial ELF header to
the destination object file. Move the initial write of the ELF header
earlier before copy_contents() so that update_relocs() uses the correct
symbol index values.
Note that this change should really go upstream. The binutils readelf
source has a similar hack for MIPS64EL though I implemented this version
from scratch using the MIPS64 ABI PDF as a reference.
Discussed with: jkoshy
Reviewed by: emaste, imp
Approved by: re (gjb, kib)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D15734
NT_GNU_PROPERTY_TYPE_0 in a .note.gnu.property section "contains a
program property note which describes special handling requirements
for linker and run-time loader." (from the System V Application Binary
Interface - Linux Extensions")
Intel CET uses two processor-specific program properties in
NT_GNU_PROPERTY_TYPE_0: GNU_PROPERTY_X86_FEATURE_1_IBT to indicate that
all executable sections are compatible with Indirect Branch Tracking,
and GNU_PROPERTY_X86_FEATURE_1_SHSTK to indicate that sections are
compatible with shadow stack.
A later change should add decoding of the individual properties.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
These issues (PR 218860 and PR 218861) are still undergoing additional
discussion in the upstream context and there may be additional changes
to come.
PR: 218860
Submitted by: Eric McCorkle
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10486
In out of memory scenarios (where one of these allocations failed but
other(s) did not), nm(1) could reference the uninitialized value of these
allocations (undefined behavior).
Always initialize any successful allocations as the most expedient
resolution of the issue. However, I would encourage upstream elftoolchain
contributors to clean up the error path to just abort immediately, rather
than proceeding sloppily when one allocation fails.
Reported by: Coverity
Sponsored by: Dell EMC Isilon
Previously elfcopy used elf_getdata to obtain data from ELF sections
being copied to binary output, but elf_getdata returns data that has
been translated - that is, data is in host byte order. When the host and
target differ in endianness (e.g., converting a big-endian MIPS ELF
object to binary on an x86 host) this resulted in byte-swapped data in
certain sections such as .dynamic.
Instead use elf_rawdata to keep data in the original, target endianness.
Reported by: Hiroki Mori <yamori83@yahoo.co.jp>, Bill Yuan
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
o Replace __riscv64 with (__riscv && __riscv_xlen == 64)
This is required to support new GCC 7.1 compiler.
This is compatible with current GCC 6.1 compiler.
RISC-V is extensible ISA and the idea here is to have built-in define
per each extension, so together with __riscv we will have some subset
of these as well (depending on -march string passed to compiler):
__riscv_compressed
__riscv_atomic
__riscv_mul
__riscv_div
__riscv_muldiv
__riscv_fdiv
__riscv_fsqrt
__riscv_float_abi_soft
__riscv_float_abi_single
__riscv_float_abi_double
__riscv_cmodel_medlow
__riscv_cmodel_medany
__riscv_cmodel_pic
__riscv_xlen
Reviewed by: ngie
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11901
Previously these were shown only for MIPS objects.
Obtained from: ELF Tool Chain r3564
MFC after: 1 week
MFC with: r321045
Sponsored by: The FreeBSD Foundation
Some non-processor-specific DT_* values overlap the range DT_LOPROC to
DT_HIPROC. Handle common ones first, then the processor-specific ones.
Obtained from: ELF Tool Chain r3563
Sponsored by: The FreeBSD Foundation
This update is primarily bug fixes in C++ symbol demangling, including:
- rvalue reference
- builtin type auto and decltype(auto)
- revamped support for function return types
- formatting fixes
- omit void when its the only param
- ref-qualifiers and others in function types
- type qualifiers in pointer-to-member function types
- incorrect handling regarding CV-qualifiers in function types
- ref-qualifier found in nested-name
- properly handle <name> ::= <substitute><template-args>
- make sure that nested function name is not a substitute candidate
- correctly handle expression in template args
- skip unknown substitution abbreviations
MFC after: 4 days
This is not fully fleshed out but is sufficient to dump the
SHT_MIPS_ABIFLAGS used in FreeBSD.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8241
Highlights of changes between r3490 and r3520:
- Improve C++ demangling
- Improve compatibility with Binutils tools wrt. error messages
- Handle additional types/sections/etc. in readelf and elfdump
- addr2line, cxxfilt: use setvbuf to set line buffering for filter use
PR: 218395
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
FreeBSD uses the full target triple when generating embedded rootfs images
(MFS_IMAGE= make option). Without this change objcopy errors out with:
objcopy: elf64-poewrpc-freebsd: invalid target name
MFC after: 2 weeks
dwarf_attrval_*() will search the parent DIE referenced by a
DW_AT_abstract_origin attribute for the value of the DW_AT_type attribute.
Do the same thing for the DW_AT_specification attributes in variable
definitions emitted by GCC 6.2, and ensure that we return an error rather
than crashing if neither DW_AT_abstract_origin or DW_AT_specification is
found when looking for the value of the DW_AT_type attribute.
PR: 215350, 215395
Reviewed by: emaste
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8920
Fixed a bug that the PE object section names are generated incorrectly
using the section name table found in the original input ELF object
instead of the intermediate ELF object.
Ticket: #541
Do not try to copy section content from a NULL d_buf when creating
uninitialized data COFF section for PE object.
Ticket: #540
Obtained from: ELF Tool Chain r3507, r3508
MFC after: 1 week
Needed for 'readelf -l' of extended phnum files. (Parity with GNU
binutils.)
Reviewed by: no one, unfortunately
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8703
Extended numbering is used for any of these fields overflowing.
Reviewed by: emaste@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8701
Include the SHN_UNDEF (zero) index special section in extended-attribute
ELF files, like GNU binutils' readelf.
Additionally, print "<no-name>" for sections without names, like GNU
binutils.
Reviewed by: kaiw@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8707
Some tools spawn c++filt and pass it a single line at a time for
demangling. This is akin to r276689 for addr2line.
Sponsored by: The FreeBSD Foundation
Previously a command like "strings f1 f2 f3" reported the exit status
based only on processing the last file.
As with GNU strings, report an error exit status if an error was
encountered processing any of the files. While here simplify the
exit status handling to just success (0) / failure (1).
Reviewed by: brooks
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8334
The mode of operation (elfcopy, mcs, or strip) is chosen based on the
program name. Broaden this to allow a substring match at the end of the
name to allow prefixes - for example, bsdstrip or aarch64-freebsd-strip.
This improves use of these tools as drop-in replacements for GNU objcopy
and strip, which are often built with a limited set of supported targets
and installed with a target prefix for cross tools.
Reviewed by: dim
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1663
Improvements include:
* readelf: report all relocation types in rel/rela for MIPS N64
* readelf: add ELFOSABI_ARM_AEABI
* elfdump: add ELFOSABI_ARM_AEABI and ELFOSABI_ARM
* Add recent RISC-V relocations
* elfcopy: use elftc_timestamp, to support SOURCE_DATE_EPOCH
Sponsored by: The FreeBSD Foundation
This fixes build failures on older releases that lack various
definitions such as EM_AARCH64 (which was unfixed before this).
Revert all of the recent compatibility changes that worked around this
problem.
This uses the same method of using the in-tree header as lib/libelf,
lib/libdwarf and usr.bin/readelf.
Reviewed by: emaste
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D6734
This fixes a EFI/PE header issue that prevented elfcopy-produced .efi
files from working with Secure Boot:
Make sure section raw size is always padded to multiple of
FileAlignment from the optional header, as requested by the PE
specification. This change should reduce the diff between PE image
generated by Binutils objcopy and elftoolchain elfcopy.
Submitted by: kaiw
Reported by: ambrisko
