guest floating point state without having to know the
size of floating-point state.
Unstaticize fpurestore to allow the hypervisor to
save/restore guest state using fpusave/fpurestore
on the allocated FPU state area.
Reviewed by: kib
Obtained from: NetApp/bhyve
MFC after: 1 week
These must have been accidently copied from the if statement a few
lines later. Also remove parameter name from function prototype.
Approved by: grehan (mentor)
as r242694):
do better detection of when we have a better version of the tcp sequence
windows than our peer.
this resolves the last of the pfsync traffic storm issues ive been able to
produce, and therefore makes it possible to do usable active-active
statuful firewalls with pf.
This is an ongoing effort to provide runtime debug information
useful in the field that does not panic existing installations.
This gives us the flexibility needed when shipping images to a
potentially large audience with WITNESS enabled without worrying
about formerly non-fatal LORs hurting a release.
Sponsored by: iXsystems
In preparation for sysctl(8) growing the ability to only print
out boot/run-time tunables we need a way to differentiate between
RW sysctl nodes that tune a particular thing, or simply export
a stat that we want to allow the sysadmin to reset to 0 (or some
other value).
To do so, we add the CTLFLAG_STATS which should be OR'd into the
CTLFLAGs when exporting a "writable/resettable" statistic node via
sysctl.
kern_yield() is problematic than.
The owned mutex is the mount interlock, and it is in fact not needed
to guarantee the stability of the mount list of active vnodes, so fix
the the issue by only taking the mount interlock for MNT_REF and
MNT_REL operations.
While there, augment the unconditional yield by some amount of
spinning [1].
Reported and tested by: pho
Reviewed by: attilio
Submitted by: attilio [1]
MFC after: 3 days
cause kernel panics.
Add a flag to the bpf descriptor to indicate whether the hold buffer
is in use. In bpfread(), set the "hold buffer in use" flag before
dropping the descriptor lock during the call to bpf_uiomove().
Everywhere else the hold buffer is used or changed, wait while
the hold buffer is in use by bpfread(). Add a KASSERT in bpfread()
after re-acquiring the descriptor lock to assist uncovering any
additional hold buffer races.
an IBSS VAP to RUN.
An 11n IBSS was beaconing HTINFO/HTCAP IE's that didn't have any HT
information setup (like the HT TX/RX MCS bitmask.)
Tested:
* AR9280, IBSS - both a statically setup channel and a scanned channel
PR: kern/172955
hierarchy of the page table entries which map the specified address.
Reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
call. The function indicates a failure by the TRUE return value. To
be extra safe, assert that the return value from the following
vm_map_insert() indicates success.
Fix style issues in the nearby lines, reformulate the comment.
Reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
parameters in IBSSes.
IBSS was just being plainly ignored here even though aggressive mode
was 'on'.
This still doesn't fix the "why are the WME parameters reset upon
interface down/up" issue.
PR: kern/165969
is totally wrong.
If we parse the WME IE here, we'll be constantly updating the WME
configuration from each WME enabled IBSS node we see.
There's a separate issue where the WME configuration is blanked out
when the interface is brought up; the WME parameters aren't "sticky."
Also, ieee80211_init_neighbor() parses the ath IE, so doing it here
isn't required.
Sorry about the noise.
PR: kern/165969
The Adhoc support wasn't parsing and handling the ath specific and WME
IEs, thus the atheros vendor support and WME TXOP parameters aren't being
copied from the peer.
It copies the WME parameters from whichever adhoc node it decides to
associate to, rather than just having them be statically configured
per adhoc node. This may or may not be exactly "right", but it's certainly
going to be more convienent for people - they just have to ensure their
adhoc nodes are setup with correct WME parameters.
Since WME parameters aren't per-node but are configured on hardware TX
queues, if some nodes support WME and some don't - or perhaps, have
different WME parameters - things will get quite quirky.
So ensure that you configure your adhoc nodes with the same WME
parameters.
Secondly - the Atheros Vendor IE is parsed and operated on per-node, so
this should work out ok between nodes that do and don't do Atheros
extensions. Once you see a becaon from that node and you setup the
association state, it _should_ parse things correctly.
TODO:
* I do need to ensure that both adhoc setup paths are correctly updating
the IE stuff. Ie, if the adhoc node is created by a data frame instead
of a beacon frame, it'll come up with no WME/ath IE config. The next
beacon frame that it receives from that node will update the state.
I just need to sit down and better understand how that's suppose to
work in IBSS mode.
Tested:
* AR5416 <-> AR9280 - fast frames and the WME configuration both popped
up. (This is with a local HAL patch that enables the fast frames
capability on the AR5416 chipsets.)
PR: kern/165969
ctl_frontend_cam_sim.c: Coalesce cfcs_online() and cfcs_offline()
into a single function since these were
identical except for one line.
Make sure we hold the SIM lock around path
creation, and calling xpt_rescan().
scsi_ctl.c: In ctlfe_onoffline(), make sure we hold the
SIM lock around path creation and free
calls, as well as xpt_action().
In ctlfe_lun_enable(), hold the SIM lock
around path and peripheral operations that
require it.
Sponsored by: Spectra Logic Corporation
MFC after: 1 week
The stageqdepth (global, over all staging queues) was being kept
incorrectly. It was being incremented whenever things were added,
but only decremented during a flush. During active fast frames activity
it wasn't being decremented, resulting in it always having a non-zero
value during normal fast-frames operation.
It was only used when checking if the aging queue should be checked;
we may as well just defer to each of those staging queue counters (which
look correct, thankfully.)
Whilst I'm here, add locking assertions in the staging queue add/remove
functions. The current crash shows that the staging queue has one frame,
but only has a tail pointer set (the head pointer being set to NULL.)
I'd like to grab a few more crashes where these locking assertions are
in place so I can narrow down the issue between "somehow locking is
messed up and things are racy" and "the stage queue head/tail pointer
manipulation logic is subtly wrong."
Tested:
* AR5416 STA, AR5413 AP; with FastFrames enabled in the AR5416 HAL.
PR: kern/174283
Committed with changes to support the following from loader.conf(5):
+ console="vidconsole comconsole" (not just console="comconsole")
+ boot_serial="anything" (not just boot_serial="YES")
+ boot_multicons="anything" (unsupported in originally-submitted patch)
PR: conf/121064
Submitted by: koitsu
Reviewed by: gcooper, adrian (co-mentor)
Approved by: adrian (co-mentor)
pointers and leave the stage queue flush routine to just do nothing
(since both head and tail here will be NULL.)
This should quieten the "stageq empty" panic where the stageq itself
is empty, but it won't fix the second KASSERT() here "staging queue empty"
as that's likely a different underlying problem.
PR: kern/174283
similar changes had to be made in various places throughout the machine-
independent virtual memory layer to support the new vm object type.
However, in most of these places, it's actually not the type of the vm
object that matters to us but instead certain attributes of its pages.
For example, OBJT_DEVICE, OBJT_MGTDEVICE, and OBJT_SG objects contain
fictitious pages. In other words, in most of these places, we were
testing the vm object's type to determine if it contained fictitious (or
unmanaged) pages.
To both simplify the code in these places and make the addition of future
vm object types easier, this change introduces two new vm object flags
that describe attributes of the vm object's pages, specifically, whether
they are fictitious or unmanaged.
Reviewed and tested by: kib
to head. I don't think the NFS client behaviour will change unless
the new "minorversion=1" mount option is used. It includes basic
NFSv4.1 support plus support for pNFS using the Files Layout only.
All problems detecting during an NFSv4.1 Bakeathon testing event
in June 2012 have been resolved in this code and it has been tested
against the NFSv4.1 server available to me.
Although not reviewed, I believe that kib@ has looked at it.
while doing a copyout. That can cause a panic, because copyout
can trigger VM faults, and we can't handle VM faults while holding
a mutex.
The solution here is to malloc a separate buffer to hold the OOA
queue entries, so that we don't risk a VM fault while filling up
the buffer and we don't have to drop the lock. The other solution
would be to wire the user's memory while filling their buffer with
copyout, but that would have been a little more complex.
Also fix a debugging parenthesis issue in ctl_abort_task() pointed
out by Chuck Tuffli.
Sponsored by: Spectra Logic Corporation
MFC after: 1 week
drivers.
The bug occurrs when a userland process has the driver instance
open and the underlying device goes away. We get the devfs
callback that the device node has been destroyed, but not all of
the closes necessary to fully decrement the reference count on the
CAM peripheral.
The reason is that once devfs calls back and says the device has
been destroyed, it is moved off to deadfs, and devfs guarantees
that there will be no more open or close calls. So the solution
is to keep track of how many outstanding open calls there are on
the device, and just release that many references when we get the
callback from devfs.
scsi_pass.c,
scsi_enc.c,
scsi_enc_internal.h: Add an open count to the softc in these
drivers. Increment it on open and
decrement it on close.
When we get a devfs callback to say that
the device node has gone away, decrement
the peripheral reference count by the
number of still outstanding opens.
Make sure we don't access the peripheral
with cam_periph_unlock() after what might
be the final call to
cam_periph_release_locked(). The
peripheral might have been freed, and we
will be dereferencing freed memory.
scsi_ch.c,
scsi_sg.c: For the ch(4) and sg(4) drivers, add the
same changes described above, and in
addition, fix another bug that was
previously fixed in the pass(4) and enc(4)
drivers.
These drivers were calling destroy_dev()
from their cleanup routine, but that could
cause a deadlock because the cleanup
routine could be indirectly called from
the driver's close routine. This would
cause a deadlock, because the device node
is being held open by the active close
call, and can't be destroyed.
Sponsored by: Spectra Logic Corporation
MFC after: 1 week
are used by NFSv4.1 for callbacks. A backchannel is a connection
established by the client, but used for RPCs done by the server
on the client (callbacks). As a result, this patch mixes some
client side calls in the server side and vice versa. Some
definitions in the .c files were extracted out into a file called
krpc.h, so that they could be included in multiple .c files.
This code has been in projects/nfsv4.1-client for some time.
Although no one has given it a formal review, I believe kib@
has taken a look at it.
The problem was a race condition between the EDT traversal used by
things like 'camcontrol devlist', and CAM peripheral driver
removal.
The EDT traversal code holds the CAM topology lock, and wants
to show devices that have been invalidated. It acquires a
reference to the peripheral to make sure the peripheral it is
examining doesn't go away.
However, because the peripheral removal code in camperiphfree()
drops the CAM topology lock to call the peripheral's destructor
routine, we can run into a situation where the EDT traversal
increments the peripheral reference count after free process is
already in progress. At that point, the reference count is
ignored, because it was 0 when we started the process.
Fix this race by setting a flag, CAM_PERIPH_FREE, that I previously
added and checked in xptperiphtraverse() and xptpdperiphtravsere(),
but failed to use. If the EDT traversal code sees that flag,
it will know that the peripheral free process has already started,
and that it should not access that peripheral.
Also, fix an inconsistency in the locking between
xptpdperiphtraverse() and xptperiphtraverse(). They now both
hold the CAM topology lock while calling the peripheral traversal
function.
cam_xpt.c: Change xptperiphtraverse() to hold the CAM topology
lock across calls to the traversal function.
Take out the comment in xptpdperiphtraverse() that
referenced the locking inconsistency.
cam_periph.c: Set the CAM_PERIPH_FREE flag when we are in the
process of freeing a peripheral driver.
Sponsored by: Spectra Logic Corporation
MFC after: 1 week
- unp_zone: kern.ipc.maxsockets limit reached
- socket_zone: kern.ipc.maxsockets limit reached
- zone_mbuf: kern.ipc.nmbufs limit reached
- zone_clust: kern.ipc.nmbclusters limit reached
- zone_jumbop: kern.ipc.nmbjumbop limit reached
- zone_jumbo9: kern.ipc.nmbjumbo9 limit reached
- zone_jumbo16: kern.ipc.nmbjumbo16 limit reached
Note that those warnings are printed not often than every five minutes and can
be globally turned off by setting sysctl/tunable vm.zone_warnings to 0.
Discussed on: arch
Obtained from: WHEEL Systems
MFC after: 2 weeks
