There are four places, all in cam_xpt.c, where ccbs are malloc'ed. Two of
these use M_ZERO, two don't. The two that don't meant that allocated ccbs
had trash in them making it hard to debug errors where they showed up. Due
to this, use M_ZERO all the time when allocating ccbs.
Submitted by: Scott Ferris <scott.ferris@isilon.com>
Sponsored by: EMC/Isilon Storage Division
Reviewed by: scottl, imp
Differential: https://reviews.freebsd.org/D2120
NB: Using NULL for default values in-case someone
or something uncomments it and reboots. See
check-password.4th(8) for additional details.
MFC after: 3 days
X-MFC-to: stable/10 stable/9
When taking user input, don't show asterisks as the user types
but instead spin a twiddle. Implement Ctrl-U to clear user input.
If the buffer is empty, either because the user has yet to type
anything, presses Ctrl-U at any time, or presses backspace enough
to end in an empty buffer, the twiddle is erased to provide feed-
back to the user.
MFC after: 3 days
X-MFC-to: stable/10 stable/9
locking out everyone in the case of setting a password longer than
the maximum (currently 16 characters). Now the required password is
truncated to the maximum input that can be read from the user.
PR: kern/198760
MFC after: 3 days
MFH: stable/10 stable/9
This is a temporary workaround until we determine a reliable sequence
of operations for detecting MC reboots.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D2084
bus_space_*_8() are not always macros, so it is not correct to use
#ifndef.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D2083
Tx multi queue is added in FreeBSD 8.0. So, the changeset drops earlier
versions support.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D2081
In theory the barriers are required to cope with write combining and
reordering. Two barriers are added (sometimes merged to one):
1. Before the first write to guarantee that previous writes to the region
have been done
2. Before the last write to guarantee that write to the last dword/qword is
done after previous writes
Barriers are inserted before in the assumption that it is better to
postpone barriers as much as it is possible (more chances that the
operation has already been already done and barrier does not stall CPU).
On x86 and amd64 bus space write barriers are just compiler memory barriers
which are definitely required.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D2077
ioctl to put interface down sets ifp->if_flags which holds the intended
administratively defined state and calls driver callback to apply it.
When everything is done, driver updates internal copy of
interface flags sc->if_flags which holds the operational state.
So, transmit from Rx path is possible when interface is intended to be
administratively down in accordance with ifp->if_flags, but not applied
yet and the operational state is up in accordance with sc->if_flags.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D2075
port loader.efi to both 32 and 64-bit ARM where we can use this file with
minimal changes.
Differential Revision: https://reviews.freebsd.org/D2031
Reviewed by: imp
There's a bug in the ticks handling where when initialised at '0', once
the ticks counter wrapped the comparison math would never trigger.
The pps calculation would never happen, and thus aggregation was never
enabled.
It manifests itself as "oh you only get 11n transmit aggregation for the
first 10 minutes of uptime."
I'm sure there are other ticks related issues lurking in net80211.
Tested:
* ath / iwn, both with 'wlandebug +11n' and a little bit of iperf to
kick off the transmit A-MPDU negotiation once the pps gets high enough.
delist_dev() function. In addition to this change:
- add a proper description of this function
- add a proper witness assert inside this function
- switch a nearby line to use the "cdp" pointer instead of cdev2priv()
MFC after: 3 days
The magic number MSDOSFS_ARGSMAGIC, which used to distinguish
"old" vs "new" msdosfs mount arguments, has not been used since
2005; it should just go away now.
Likewise, the local-to-Unicode table that changed at the same
time is unused.
Leave the space reserved in the old style mount arguments, though,
since we still support the old mount call (via the cmount entry
point).
Submitted by: Chris Torek <chris.torek@gmail.com>
MFC after: 2 weeks
This is based on the AP135 design - QCA9558 SoC, 3x3 2GHz wifi, but no
5GHz (11n or 11ac) chip is available.
It however still has 128MiB of RAM, 16MiB of NOR flash and the AR8327N
gigabit switch - so it's quite a beefy router device.
Tested:
* Well, a unit, naturally
Obtained from: Completely messing up an amazon.com order and getting this instead, and asking "hey, wonder if I could.."
* add ipfw
* delete ath / ath_ahb for now, until I can have Warner beat me
with the clue stick about putting in conditional build things into
the ath Makefile so the module builds can just have the HAL bits
that are relevant for a particular target.
path.
* For now there's no exposed control over classic / LNA antenna diversity,
so just stub them out. Adding this will take quite a bit of time.
* Add a function to fetch the CTS timeout.
PR: kern/198558
This allows us to get rid of bzero which was added specifically to make
mtx_init on p_mtx reliable.
This also fixes a potential problem where mtx_init on other mutexes
could trip over on unitialized memory and fire an assertion.
Reviewed by: kib
proc_set_cred_init can be used to set first credentials of a new
process.
Update proc_set_cred assertions so that it only expects already used
processes.
This fixes panics where p_ucred of a new process happens to be non-NULL.
Reviewed by: kib
Prior to this change the kernel would take p1's credentials and assign
them tempororarily to p2. But p1 could change credentials at that time
and in effect give us a use-after-free.
No objections from: kib
named objects to zero before the virtual address is selected. Previously,
the color setting was delayed until after the virtual address was
selected. In rtld, this delay effectively prevented the mapping of a
shared library's code section using superpages. Now, for example, we see
the first 1 MB of libc's code on armv6 mapped by a superpage after we've
gotten through the initial cold misses that bring the first 1 MB of code
into memory. (With the page clustering that we perform on read faults,
this happens quickly.)
Differential Revision: https://reviews.freebsd.org/D2013
Reviewed by: jhb, kib
Tested by: Svatopluk Kraus (armv6)
MFC after: 6 weeks
we're not looking at it.
Fix this by increasing l2->l2_occupancy before we try to alloc (and decrease
it if the allocation failed, or if another thread did a similar allocation).
Submitted by: Kohji Okuno <okuno.kohji@jp.panasonic.com>
MFC after: 1 week
- Use real locking, replace Giant with global sx protecting the
subsystem. Since the subsystem' lock is no longer dropped during
the sleepsk, remove not needed SHMSEG_WANTED segment flag, and
revert r278963.
- To do proper code simplification possible after the change of the
lock, restructure several functions into _locked body and
originally-named wrapper which calls into _locked variant. This
allows to eliminate the 'goto done2' spread over the code.
- Merge shm_find_segment_by_shmid() and shm_find_segment_by_shmidx().
- Consistently change all function prototypes to ANSI C.
Reviewed by: mjg (who has earlier version of the similar patch to
introduce real locking)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
appears to be too inaccurate that it can be used to synchronize the
playback data stream. If there is a recording endpoint associated with
the playback endpoint, use that instead. That means if the isochronous
OUT endpoint is asynchronus the USB audio driver will automatically
start recording, if possible, to get exact information about the
needed sample rate adjustments. In no recording endpoint is present,
no rate adaption will be done.
While at it fix an issue where the hardware buffer pointers don't get
reset at the first device PCM trigger.
Make some variables 32-bit to avoid problems with multithreading.
MFC after: 3 days
PR: 198444
These are actually almost the same units; except one is 3x3 5GHz, and
one is 2x2 5GHz.
Tested:
* TP-Link TL-WDR3600
TODO:
* The ath0/ath1 MAC addresses are ye garbage (00:02:03:04:05:06); fixing
that will take a little more time. It works fine with the ath0/ath1
MAC addresses set manually.
* Go through and yank the AR9344 on-board switch config (arswitch1);
it's not required here for this AP.
The AR934x (and maybe others in this family) have a more complicated
GPIO mux. The AR71xx just has a single function register for a handful
of "GPIO or X" options, however the AR934x allows for one of roughly
100 behaviours for each GPIO pin.
So, this adds a quick hints based mechanism to configure the output
functions, which is required for some of the more interesting board
configurations. Specifically, some use external LNAs to improve
RX, and without the MUX/output configured right, the 2GHz RX side
will be plain terrible.
It doesn't yet configure the "input" side yet; I'll add that if
it's required.
Tested:
* TP-Link TL-WDR3600, testing 2GHz STA/AP modes, checking some
basic RX sensitivity things (ie, "can I see the AP on the other
side of the apartment that intentionally has poor signal reception
from where I am right now.")
Whilst here, fix a silly bug in the maxpin routine; I was missing
a break.
Previously format string traversal could happen while the string itself was
being modified.
Use allproc_lock as coredumping is a rare operation and as such we don't
have to create a dedicated lock.
Submitted by: Tiwei Bie <btw mail.ustc.edu.cn>
Reviewed by: kib
X-Additional: JuniorJobs project
Currently we update timestamps unconditionally when doing read or
write operations. This may slow things down on hardware where
reading timestamps is expensive (e.g. HPET, because of the default
vfs.timestamp_precision setting is nanosecond now) with limited
benefit.
A new sysctl variable, vfs.devfs.dotimes is added, which can be
set to non-zero value when the old behavior is desirable.
Differential Revision: https://reviews.freebsd.org/D2104
Reported by: Mike Tancsa <mike sentex net>
Reviewed by: kib
Relnotes: yes
Sponsored by: iXsystems, Inc.
MFC after: 2 weeks
- Use ifunit() instead of going through the interface list ourselves.
- Remove unused parameter.
- Move the most important comment above the function.
Sponsored by: Nginx, Inc.
Many thanks to ian who gently provided me the DS1307 breakout board.
Tested on: Raspberry pi
Differential Revision: https://reviews.freebsd.org/D2022
Reviewed by: rpaulo
to get the default frequency of the sdhci device.
While here use a u_int to hold the frequency as it may be too large to fit
in a 32-bit signed integer. This is the case when we have a 250MHz clock.
and create a "hidden" API that can be used in other system headers without
adding namespace pollution.
- If the POPCNT instruction is enabled at compile time, use
__builtin_popcount*() to implement __bitcount*(), otherwise fall back
to software implementations.
- Use the existing bitcount16() and bitcount32() from <sys/systm.h> to
implement the non-POPCNT __bitcount16() and __bitcount32() in
<sys/types.h>.
- For the non-POPCNT __bitcount64(), use a similar SWAR method on 64-bit
systems. For 32-bit systems, use two __bitcount32() operations on the
two halves.
- Use __bitcount32() to provide a __bitcount() that operates on plain ints.
- Use either __bitcount32() or __bitcount64() to provide a
__bitcountl() that operates on longs.
- Add public bitcount*() wrappers for __bitcount*() for use in the kernel
in <sys/libkern.h>.
- Use __builtinl() instead of __builtin_popcountl() in BIT_COUNT().
Discussed with: bde
Each plaform performs virtual memory split between kernel and user space
and assigns kernel certain amount of memory space. However, is is sometimes
reasonable to change the default values. Such situation may happen on
systems where the demand for kernel buffers is high, many devices occupying
memory etc. This of course comes with the cost of decreasing user space
memory range so shall be used with care. Most embedded systems will not
suffer from this limtation but rather take advantage of this potential
since default behavior is left unchanged.
Submitted by: Wojciech Macek <wma@semihalf.com>
Reviewed by: imp
Obtained from: Semihalf
translation. In particular, despite IO-APICs only take 8bit apic id,
IR translation structures accept 32bit APIC Id, which allows x2APIC
mode to function properly. Extend msi_cpu of struct msi_intrsrc and
io_cpu of ioapic_intsrc to full int from one byte.
KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid
bringing all dmar headers into interrupt code. The non-PCI(e) devices
which generate message interrupts on FSB require special handling. The
HPET FSB interrupts are remapped, while DMAR interrupts are not.
For each msi and ioapic interrupt source, the iommu cookie is added,
which is in fact index of the IRE (interrupt remap entry) in the IR
table. Cookie is made at the source allocation time, and then used at
the map time to fill both IRE and device registers. The MSI
address/data registers and IO-APIC redirection registers are
programmed with the special values which are recognized by IR and used
to restore the IRE index, to find proper delivery mode and target.
Map all MSI interrupts in the block when msi_map() is called.
Since an interrupt source setup and dismantle code are done in the
non-sleepable context, flushing interrupt entries cache in the IR
hardware, which is done async and ideally waits for the interrupt,
requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is
modified to take a boolean argument requesting busy-wait for the
written sequence number instead of waiting for interrupt.
Some interrupts are configured before IR is initialized, e.g. ACPI
SCI. Add intr_reprogram() function to reprogram all already
configured interrupts, and call it immediately before an IR unit is
enabled. There is still a small window after the IO-APIC redirection
entry is reprogrammed with cookie but before the unit is enabled, but
to fix this properly, IR must be started much earlier.
Add workarounds for 5500 and X58 northbridges, some revisions of which
have severe flaws in handling IR. Use the same identification methods
as employed by Linux.
Review: https://reviews.freebsd.org/D1892
Reviewed by: neel
Discussed with: jhb
Tested by: glebius, pho (previous versions)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
queue. They are for first-level translations and device TLB.
Review: https://reviews.freebsd.org/D1892
Reviewed by: neel
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
* Just do the buf check early and fail out
* If the offset being searched is:
00110000 00 b5 7e 45 61 e2 76 d3 c1 78 dd 15 95 cd 1f f1 |..~Ea.v..x......|
.. and the match string is '.!/bin/sh'
.. then it'll set the match string[0] to '\0', do a strncmp() against
the read buffer, find it's matching two zero-length strings, and think
that's where to start.
MFC after: 2 weeks
promoted" panics. The sequence of events that leads to a panic is rather
long and circuitous. First, suppose that process P has a promoted
superpage S within vm object O that it can write to. Then, suppose that P
forks, which leads to S being write protected. Now, before P's child
exits, suppose that P writes to another virtual page within O. Since the
pages within O are copy on write, a shadow object for O is created to
house the new physical copy of the faulted on virtual page. Then, before
P can fault on S, P's child exists. Now, when P faults on S, it will
follow the "optimized" path for copy-on-write faults in vm_fault(),
wherein the underlying physical page is moved from O to its shadow object
rather than allocating a new page and copying the new page's contents from
the old page. Moreover, suppose that every 4 KB physical page making up S
is moved to the shadow object in this way. However, the optimized path
does not move the underlying superpage reservation, which is the root
cause of the panics! Ultimately, P performs vm_object_collapse() on O's
shadow object, which destroys O and in doing so breaks any reservations
still belonging to O. This leaves the reservation underlying S in an
inconsistent state: It's simultaneously not in use and promoted. Breaking
a reservation does not demote it because I never intended for a promoted
reservation to be broken. It makes little sense. Finally, this
inconsistency leads to an assertion failure the next time that the
reservation is used.
The failing assertion does not (currently) exist in FreeBSD 10.x or
earlier. There, we will quietly break the promoted reservation. While
illogical and unintended, breaking the reservation is essentially
harmless.
PR: 198163
Reviewed by: kib
Tested by: pho
X-MFC after: r267213
Sponsored by: EMC / Isilon Storage Division
The only drives I have discovered so far that support medium type
reports are newer HP LTO (LTO-5 and LTO-6) drives. IBM drives
only support the density reports.
sys/cam/scsi/scsi_sa.h:
The number of possible density codes in the medium type
report is 9, not 8. This caused problems parsing all of
the medium type report after this point in the structure.
usr.bin/mt/mt.c:
Run the density codes returned in the medium type report
through denstostring(), just like the primary and secondary
density codes in the density report. This will print the
density code in hex, and give a text description if it
is available.
Thanks to Rudolf Cejka for doing extensive testing with HP LTO drives
and Bacula and discovering these problems.
Tested by: Rudolf Cejka <cejkar at fit.vutbr.cz>
Sponsored by: Spectra Logic
MFC after: 4 days
in other places that set the external storage type (ext_type) such as
m_cljset(), m_extadd(), mb_ctor_clust(), and vn_sendfile().
Differential Revision: https://reviews.freebsd.org/D2080
Reviewed by: np, glebius
MFC after: 2 weeks
conversion:
- The linux compat API layer casts the ticks to unsigned long which
might cause problems when the ticks value is negative.
- Guard against already expired ticks values, by checking if the
passed expiry tick is already elapsed.
- While at it avoid referring the address of an inlined function.
MFC after: 3 days
Sponsored by: Mellanox Technologies
* Fix the multiple same-named devclasses; the duplicate name
trips up the linker.
* Re-do the taskqueue stuff to use the new cpuset API, not the old
pinned API.
* Add includes for the new location of the RSS configuration routines.
This allows ixgbe to compile as a module /and/ linked into the kernel,
along with RSS working.
Sponsored by: Norse Corp, Inc.
allocator tries to move the entry up, after the boundary. The new
location may still fail to satisfy boundary requirement, for instance,
if the boundary is set to page size, and allocation is of multiple
pages.
Recheck that boundary is not crossed after the move. If it is
crossed, give up on allocating the whole entry and split it.
Reported by: Michael Fuckner <michael@fuckner.net>, running nvme(4)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
next entry does not intersect with the tail of the new entry, but also
that previous entry is also before new entry start.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
several types of data into the mem-info array (DRAM, SRAM, flash). We
need to extract just the DRAM entries for translation into fdt memory
properties.
Also, increase the number of regions we can handle from 5 to 16.
Submitted by: Michal Meloun
Values smaller than two lead to strange asserts that have nothing to do
with the actual problem (in the case of size=0), or to writing beyond the
end of the allocated buffer in sbuf_finish() (in the case of size=1).
- Allow to call the function with vm object lock held.
- Allow to specify reqpage that doesn't match any page in the region,
meaning freeing all pages.
o Utilize the new function in couple more places in vnode pager.
Reviewed by: alc, kib
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Overview:
* implemented quirk for forcing SATA interface enable
* restore value to status register - this enables link autonegotiation
Modifications:
* devid:vendorid field
* quirk for forcing PI setting (BIOS is doing that on PC-like systems)
* write to capabilites field to enable phy link initialization
Submitted by: Wojciech Macek <wma@semihalf.com>
Reviewed by: imp, mav
Obtained from: Semihalf
This update brings few features:
o Support for the setmaster/dropmaster ioctls. For instance, they
are used to run multiple X servers simultaneously.
o Support for minor devices. The only user-visible change is a new
entry in /dev/dri but it is useless at the moment. This is a
first step to support render nodes [1].
The main benefit is to greatly reduce the diff with Linux (at the
expense of an unreadable commit diff). Hopefully, next upgrades will be
easier.
No updates were made to the drivers, beside adapting them to API
changes.
[1] https://en.wikipedia.org/wiki/Direct_Rendering_Manager#Render_nodes
Tested by: Many people
MFC after: 1 month
Relnotes: yes
- Split the driver into independent pf and vf loadables. This is
in preparation for SRIOV support which will be following shortly.
This also allows us to keep a seperate revision control over the
two parts, making for easier sustaining.
- Make the TX/RX code a shared/seperated file, in the old code base
the ixv code would miss fixes that went into ixgbe, this model
will eliminate that problem.
- The driver loadables will now match the device names, something that
has been requested for some time.
- Rather than a modules/ixgbe there is now modules/ix and modules/ixv
- It will also be possible to make your static kernel with only one
or the other for streamlined installs, or both.
Enjoy!
Submitted by: jfv and erj
Drops are observed under multi-stream TCP traffic due to put-list
overflow with limit equal to 64.
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)
Transmit may be called when TxQ is not started yet (i.e. txq->common is
invalid). TxQ state is checked below when mbuf is processed and dropped
if TxQ is not started.
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)
The information is required for NIC update and config tools.
Submitted by: Artem V. Andreev <Artem.Andreev at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)
It is done to structure sysctl and do not mix with Tx queue statistics
to be added.
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)
without a commit message...
Use sbuf_new() + SYSCTL_OUT() instead of wiring the userland buffer and
using sbuf_new_for_sysctl(). The preallocated 256 byte buffer is always
going to be big enough to hold these results, and this should be more
efficient than wiring the old buffer.
INCLUDENUL is set and sbuf_finish() has been called, the length has been
incremented to count the nulterm byte, and in that case current length is
allowed to be equal to buffer size, otherwise it must be less than.
Add a predicate macro to test for SBUF_INCLUDENUL, and use it in tests, to
be consistant with the style in the rest of this file.
and cap_ioctls_get(). On FreeBSD, these are 'unsigned long', but on Linux,
ioctl(2) takes an 'int', making mild abstraction desirable.
MFC after: 3 days
Sponsored by: Google, Inc.
writing approximately never (< 0.00000001% under heavy VM load, and it can
go for months without ever being acquired in normal operation). This
provides a 10% (2-minute) improvement in wall clock time for make -j32
buildworld on a 4-core 32-thread POWER8.
handle_ddp_close() function in t4_ddp.c as the logic is similar
to handle_ddp_data(). This allows all knowledge of the special
DDP mbufs to be private to t4_ddp.c as well.
This makes FreeBSD guest to not avoid using LAPIC timer, preferring HPET
due to worries about non-existing for virtual CPUs deep sleep states.
Benchmarks of usleep(1) on guest and host show such extra latencies:
- 51us for virtual HPET,
- 22us for virtual LAPIC timer,
- 22us for host HPET and
- 3us for host LAPIC timer.
MFC after: 2 weeks
A comment in the code stated we PROC_LOCK and as a side effect guarantee
all writers released process lock. But at that point such lock was already
taken while we were removing the process from all lists, so it should be already
unreachable.
The goal here is to provide one place altering process credentials.
This eases debugging and opens up posibilities to do additional work when such
an action is performed.
A lot of these embedded boards don't have a unique MAC address per
device stored somewhere unique - sometimes they'll have one MAC
for both arge NICs; someties they'll have one MAC for both arge NICs
/and/ the ath NICs. In these instances, we need to derive device
specific MAC addresses from the base MAC address.
These functions will be used by some follow-up code that'll slot
into if_arge and if_ath.
device restart.
(Committers note - once scan overhaul and a few other things have been
fixed in net80211 to not block things in the taskqueue, this can disappear
and the device specific taskqueues in other drivers can also go away.)
PR: kern/197143
Submitted by: Andriy Voskoboinyk <s3erios@gmail.com>
fixes various races between wpi_notif_intr() and wpi_stop_locked().
(attachment 154381)
Committers note: yes, unlock/if_input/lock has to go away, but that'll
have to be done later.
PR: kern/197143
Submitted by: Andriy Voskoboinyk <s3erios@gmail.com>
(Committer note: these checks will have to be re-established in a future
commit as /well/ as having the KASSERTs.)
PR: kern/197143
Submitted by: Andriy Voskoboinyk <s3erios@gmail.com>
traps do appear in the regular call stack, rather than only in a special
trap frame, so we don't need to inject the trap-frame $pc into a returned
stack trace in DTrace.
MFC after: 3 days
Sponsored by: DARPA, AFRL
skip using the DTrace 'profile' provider on ARM. This causes stack traces
to skip various driver-and callout-related things as they do on x86, where
the likewise arbitrary values are '6' (32-bit) and '10' (64-bit) for
similar sorts of reasons.
MFC after: 3 days
Sponsored by: DARPA, AFRL
