like EX and SRX. The install command uses pkgfs to extract a kernel,
zero or more modules and a root file system from the specified package
and boots the kernel. The name of the kernel, the list of modules and
the name of the root file system can be specified by putting a
file called "metatags in the package.
The package to use is given by an URL. The schemes supported are
tftp and file. For the file scheme, the disk is currently hardcoded
but that should really look for the package on all devices and
partititions.
Obtained from: Juniper Networks, Inc.
- Replace the global driver lock with a per-instance device lock.
- Use the per-instance device lock instead of Giant for the CAM sim lock.
- Add global locks to protect the adapter list and DPC queues.
- Use wakeup() and mtx_sleep() to wait for certain events like the
controller going idle rather than polling via timeouts passed to
tsleep().
- Use callout(9) instead of timeout(9).
- Mark the interrupt handler MPSAFE.
- Remove compat shims for FreeBSD versions older than 8.0.
Reviewed by: Steve Chang <ychang@highpoint-tech.com>
- Use the existing vbus locks instead of Giant for the CAM sim lock.
- Use callout(9) instead of timeout(9).
- Mark the interrupt handler MPSAFE.
- Don't attempt to pass data in the softc from probe() to attach().
- Remove compat shims for FreeBSD versions older than 8.0.
Reviewed by: Steve Chang <ychang@highpoint-tech.com>
- Use the existing vbus locks instead of Giant for the CAM sim lock.
- Use callout(9) instead of timeout(9).
- Mark the interrupt handler MPSAFE.
- Don't attempt to pass data in the softc from probe() to attach().
- Remove compat shims for FreeBSD versions older than 8.0.
Reviewed by: Steve Chang <ychang@highpoint-tech.com>
- Use callout(9) instead of timeout(9).
- Use the existing hba lock as the CAM sim lock instead of Giant.
- Mark interrupt handler MPSAFE.
- Reorder detach and destroy the hba lock in detach.
Reviewed by: Steve Chang <ychang@highpoint-tech.com>
device attachment on arm platforms. If this is defined, nexus attaches
early in BUS_PASS_BUS, and other busses and devices attach later, in the
pass number they are set up for. Without it defined, nexus attaches in
BUS_PASS_DEFAULT and thus so does everything else, which is status quo.
Arm platforms which use FDT data to enumerate devices have been relying
on devices being attached in the exact order they're listed in the dts
source file. That's one of things currently preventing us from using
vendor-supplied fdt data (because then we don't control the order of the
devices in the data). Multi-pass attachment can go a long way towards
solving that problem by ensuring things like clock and interrupt drivers
are attached before the more mundane devices that need them.
The long-term goal is to have all arm fdt-based platforms using multipass.
This option is a bridge to that, letting us enable it selectively as
platforms are converted and tested (the alternative being to just throw
a big switch and try to fight fires as they're reported).
- Cleanup some register reads and writes to use existing register
access macros.
- Ensure code which only applies to the control endpoint is not run
for other endpoints in the data transfer path.
MFC after: 3 days
Rename all of the TAP test applications from <test> to <test>_test
to match the convention described in the TestSuite wiki page
Phabric: D538
Approved by: jmmv (mentor)
Sponsored by: EMC / Isilon Storage Division
handled by creator(4) (Sun Creator 3D, Elite 3D, etc.). This provides
vt(4) consoles on all devices currently supported by syscons on sparc64.
The driver should also be easily adaptable to support newer Sun framebuffers
such as the XVR-500 and higher.
Many thanks to dumbbell@ (Jean-Sebastien Pedron) for testing this remotely
during development.
All of the sources for the tests are contained in the
current working directory and the subdirectories
Phabric: D537
Reviewed by: jmmv
Approved by: jmmv (mentor)
Sponsored by: EMC / Isilon Storage Division
ethernet class.
Note: This is untested as I do not have a device like this. That is
reflected in the MFC timeout.
PR: 192345
Submitted by: rozhuk.im gmail.com
MFC after: 4 weeks
Our mount_nfs does use -o nfsv<2|3|4> or -2 or -3 to specify the version.
OSX (these days), Solaris, and Linux use -o vers=<2,3,4>.
With the upcoming autofs support we can make a lot of (entrerprisy) setups
getting mount options from LDAP just work by providing -o vers= compatibility.
PR: 192379
Reviewed by: wblock, bjk (man page), rmacklem, emaste
MFC after: 3 days
Sponsored by: DARPA,AFRL
we set MK_INET6_SUPPORT to no, not if we do define INET6.
This way we do not try to build IPv6 parts in if the kernel doesn't support
them.
This unbreaks several kernel configurations building modules but no INET6.
With the current implementation of managed fictitious ranges when
also using VM_PHYSSEG_DENSE, a user could try to register a
fictitious range that starts inside of vm_page_array, but then
overrruns it (because the end of the fictitious range is greater than
vm_page_array_size + first_page). This would result in PHYS_TO_VM_PAGE
returning unallocated pages from past the end of vm_page_array. The
same could happen if a user tried to register a segment that starts
outside of vm_page_array but ends inside of it.
In order to fix this, allow vm_phys_fictitious_{reg/unreg}_range to
use a set of pages from vm_page_array, and allocate the rest.
Sponsored by: Citrix Systems R&D
Reviewed by: kib, alc
vm/vm_phys.c:
- Allow registering/unregistering fictitious ranges that overrun
vm_page_array.
The MD allocators were very common, however there were some minor
differencies. These differencies were all consolidated in the MI allocator,
under ifdefs. The defines from machine/vmparam.h turn on features required
for a particular machine. For details look in the comment in sys/sf_buf.h.
As result no MD code left in sys/*/*/vm_machdep.c. Some arches still have
machine/sf_buf.h, which is usually quite small.
Tested by: glebius (i386), tuexen (arm32), kevlo (arm32)
Reviewed by: kib
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
null terminate.
Temporarily use "From: $user@$hostname" rather than "From: $user".
The latter exposes incompatible behavior if using dma(8). sendmail(8)
(and other alternatives) canonify either form on submission (even
if masquerading), but dma will leak a non-compliant address to
the internet.
In vdev_get_stats, check that the vdev is not a hole before computing the
fragmentation. This fixes a panic when removing log device.
Illumos issue:
5049 panic when removing log device
Author: Alex Reece <alex@delphix.com>
MFC after: 2 weeks
Make the sysinit tool a build tool rather than building in with
/usr/bin/cc and running it from OBJDIR. (It will be moved to usr.bin
once a manpage is written and a few style cleanups are done.)
Split the makefile bits for Hans' kernel shim layer into their own
includable kshim.mk.
Move USB support into a .mk file so loaders can include it.