it up on exit. The address for attaching the emulator (path, target id,
lun) is now specified on the command line. Some attempt at cathing
signals and cleaning up target mode instances is now made.
Describe /dev/vinum/control*
Describe drive "referenced" state.
Remove warning about kldunload; it seems to work now.
Still more descriptions of how to debug things.
AX88140A with power management and magic packet support. Correct the
addresses of the PCI power management registers and add some code to
detect the revision ID of the AX88141 and identify it in the probe
messages.
No other changes are needed since the AX88141 is functionally
identical to the AX88140A.
the peer demands authentication, and add some more detail to the
example configurations.
This is the first time I've written any TCL, so I'd appreciate it
if someone eyeballed the *-auth stuff and fixed any glaring problems.
- Add syscons.4.
If there still are errors, whether technical or grammatical, they are
entirely mine, not the reviewers'.
Reviewed by: sos, jkh, archie, Nick Hilliard <nick@iol.ie>
peripheral drivers can determine where in the devstat(9) list they are
inserted.
This requires recompilation of libdevstat, systat, vmstat, rpc.rstatd, and
any ports that depend on the devstat code, since the size of the devstat
structure has changed. The devstat version number has been incremented as
well to reflect the change.
This sorts devices in the devstat list in "more interesting" to "less
interesting" order. So, for instance, da devices are now more important
than floppy drives, and so will appear before floppy drives in the default
output from systat, iostat, vmstat, etc.
The order of devices is, for now, kept in a central table in devicestat.h.
If individual drivers were able to make a meaningful decision on what
priority they should be at attach time, we could consider splitting the
priority information out into the various drivers. For now, though, they
have no way of knowing that, so it's easier to put them in an easy to find
table.
Also, move the checkversion() call in vmstat(8) to a more logical place.
Thanks to Bruce and David O'Brien for suggestions, for reviewing this, and
for putting up with the long time it has taken me to commit it. Bruce did
object somewhat to the central priority table (he would rather the
priorities be distributed in each driver), so his objection is duly noted
here.
Reviewed by: bde, obrien
Russian zones/rules in rev.1.12. ache objected mainly to the changes
in the Moscow zone names in rev.1.11 and those changes have been backed
out in the vendor branch.
Reviewed by: ache
and Racore 8148 adapters are now supported by the ThunderLAN driver.
The 8165 is just a plain vanilla 10/100 card; the 8148 is a 'multi-
personality' adapter which can support 10baseT, 100baseTX and 100baseFX
if you include the proper modules.
Also update the tl man page to mention the Racore cards.
is not implied by -Wall as claimed by gcc.1. Adding it causes a
measly 7193 new warnings for LINT, mostly for "unused parameter" and
"comparison between signed and unsigned".
- The numpad * key should always generate *.
- The numpad - is fkey52 and should not generate a control code (0x1f).
- The numpad 5 is fkey54, not fkey61.
- The numpad 6 is fkey55 and should not generate a control code (0x1e).
- Fix Spanish keymap.
PR: i386/9532
Submitted by jose@we.lc.ehu.es.
- Added Croatian keymap. It is the same as the Slovenian keymap.
PR: misc/9706
Pointed out by: Damjan Marion
- Addef Finnish keymap. It is the same as the Swedish keymap.
PR: bin/9632
Submitted by: Martti Kuparinen
- Assign special functions consistently in all keymap files.
101 keyboard 84 keyboard function
------------------------------------------------------------------------
Ctrl-Alt-Delete Ctrl-Alt-Delete reboot
Ctrl-Alt-Esc Ctrl-Alt-Esc debug
Ctrl-Alt-Space Ctrl-Alt-Space susp
ScrollLock ScrollLock slock
PrintScreen Shift-(Numpad *)/PrintScreen nscr
Ctrl-PrintScreen Shift-Ctrl-(Numpad *)/PrintScreen debug
Alt-PrintScreen/SysRq SysRq nop
Pause Ctrl-NumLock slock
Shift-Pause Shift-Ctrl-NumLock saver
Alt-Pause Alt-Ctrl-NumLock susp
Ctrl-Pause/Break Ctrl-ScrollLock/Break nop
Left W*ndow key NA fkey62
Right W*ndow key NA fkey63
Menu NA fkey64
NOTE: us.unix.kbd and us.emacs.kbd are very much different from the
other keymaps, thus, I didn't touch them.
There are only skeletons left here; they merely serve as a backup to
include the real versions under ${PORTSDIR}/Mk while we update the ports
tree to include them directly.
<bsd.libnames.mk> is included regardless of the object file format.
This is needed to fix the a.out PAM breakage that manifests itself
when trying to build login.
of important changes to European and South and Central American countries
which should be back-ported to 3.x.
Obtained from: ftp://elsie.nci.nih.gov/pub/tzdata1999a.tar.gz
This should be merged into RELENG_3 and a similar patch may be needed
for RELENG_2_2, should that deemed necessary.
Make world succeeded with these patches in my tree.
Submitted by: "Kaleb S. KEITHLEY" <kaleb@ics.com>
When linking statically, LIBPAM is augmented with the extra libraries
that the PAM modules require. The idea is to centralize this
information rather than scattering it about in the Makefiles of
all the applications that use (OK, will use) PAM.
There is a new variable MINUSLPAM that should be used instead of
"-lpam". In the static case, it gets -l flags for the extra required
libraries.
This approach was suggested by <bde>, but he didn't actually review
my changes.
building dlopen-able modules, and add features needed to build a
static PAM library. I think I cleaned it up some, too, but beauty
is in the eye of the beholder.
You can now build a shared library without version numbers, by
defining SHLIB_NAME to something like "pam_unix.so". If SHLIB_MAJOR
and/or SHLIB_MINOR are set, SHLIB_NAME gets the usual default value,
but it can be overridden if desired. If none of these symbols are
set, no shared library is built.
SHLIB_LINK controls the name of the symbolic link that points to
the library. If it is unset, no link is made. In the usual case,
it gets the right default: e.g., "libc.so" for ELF, nothing for
a.out. This can be overridden.
STATICOBJS can be set to a list of extra object files that should
be added to the static library but not to the shared library.
These objects are added to the profiled library too.
These changes should make it easy to use <bsd.lib.mk> for building
things such as PAM modules and dynamic linkers, for which <bsd.prog.mk>
has been abused until now.
languages (en = English, de = German, zn = Chinese, and so on). This
complements the existing iso3166 file, which maps codes to countries.
Country code != language code.
I ran this past -core. No one voiced any objections, jkh said "fine".
The Eighth Edition is *not* descended from the Seventh Edition.
Submitted by: Greg Lehey <grog@lemis.com>
and Dennis Ritchie
Here's a quote from Dennis Ritchie, posted to Warren Toomey:
[January 1999]
----- Forwarded message from dmr -----
I also got mail from Norman Wilson today about the discussion.
This is mainly to confirm and fill out details of Wilson's account.
The Eighth Edition system started with (I believe) BSD 4.1c and
the work was done on VAX 11/750s -- our group did not get
a 780 until a while later.
Most of the operating system superstructure of BSD was retained
(in particular no one (even the indefatigable Norman)
wanted to get much into the paging code. Norman is also
right that the competitor was John Reiser's (and Tom London's)
32V descendant from another group at the Labs. In structure
this system had a lot to offer (in particular the buffer cache and the page
pool were unified, but it was clear that their work was not being
supported by their own management. It was used for a while on
our first 750 and also our first 11/780 ("alice", a name that lives
in netnews fame preceding the reach of Dejanews).
The big change leading to V8 was the scooping-out and replacement of
the character-device and networking part by the streams mechanism. Later,
Peter Weinberger added the file-system switch that enabled
remote file systems and prescient things ideas like /proc). Weinberger,
as Norman said, also did a simple-minded FFS.
The TCP/IP stack wasn't very important to us then and it has a mixed and
murky history. Much of it came from early CSRG work, but it was converted
to a streams approach by Robert Morris and subsequently fiddled over a lot.
Likewise, as Norman said, the applications (/bin and whatnot) were somewhat
of a mixture. Many were the locally-done versions, some were taken
from BSD in some incarnation, some from System V.
Dennis
----- End of forwarded message from dmr -----
(as given by "uname -m") by which you can specify which
architectures the port is appropriate for.
Idea borrowed from: NetBSD, OpenBSD
Reviewed by: simokawa
(2) New variable PERL_ARCH (value: ${ARCH}-freebsd) that is also
passed to ${PLIST_SUB}. Use it to simplify PLISTs.
Submitted by: simokawa
(3) Check OSVERSION as well as existence of /usr/bin/perl5 before
assuming USE_PERL5 is to be a no-op. Basically to allow building
of 2.2-INDEX on a 3.0 machine.
(4) Change USE_QT definition to use new shlib version (2) and
directory (qt142).
(5) Uncomment temporary Motif dependency for parallel package
building. We still need to figure out a way to install the pkg
database files, but it's a start.
(6) Move EXTRACT_SUFX up into the pre.mk area so it can be used in
exists() tests.
(7) Add MASTER_SITE_COMP_SOURCES. Note that this is defined like
"/pub/usenet/comp.sources.%SUBDIR%/" so you can specify something
like "SUBDIR=x/volume18" to select the newsgroup as well as
subdirectory name.
Submitted by: "distfiles" fenner
(8) Other misc. master site cleanup.
Submitted by: "distfiles" fenner
(9) New target "maintainer". I intend to use it to auto-mail failure
build failure notices to the maintainer.
+ ECP parallel port chipset FIFO detection
+ DMA+FIFO parallel I/O handled as chipset specific
+ nlpt updated in order to use the above enhanced parallel I/O.
Use 'lptcontrol -e' to use enhanced I/O
+ Various options documented in LINT
+ Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for
an overview of the IEEE1284 standard
+ Detection of PnP parallel devices at boot
+ Read capability added to nlpt driver to get IEEE1284 compliant
printer status with a simple 'cat /dev/lpt0'
+ IEEE1284 peripheral emulation added to BYTE mode. Two computers
may dialog according to IEEE1284 signaling method.
See PERIPH_1284 option and /sys/dev/ppbus/ppi.c
All this code is supposed to provide basic functions for IEEE1284 programming.
ppi.c and nlpt.c may act as examples.
than ".so". The old extension conflicted with well-established
naming conventions for dynamically loadable modules.
The "clean" targets continue to remove ".so" files too, to deal with
old systems.
on the ASIX AX88140A chip. Update /sys/conf/files, RELNOTES.TXT,
/sys/i388/i386/userconfig.c, sysinstall/devices.c, GENERIC and LINT
accordingly.
For now, the only board that I know of that uses this chip is the
Alfa Inc. GFC2204. (Its predecessor, the GFC2202, was a DEC tulip card.)
Thanks again to Ulf for obtaining the board for me. If anyone runs
across another, please feel free to update the man page and/or the
release notes. (The same applies for the other drivers.)
FreeBSD should now have support for all of the DEC tulip workalike
chipsets currently on the market (Macronix, Lite-On, Winbond, ASIX).
And unless I'm mistaken, it should also have support for all PCI fast
ethernet chipsets in general (except maybe the SMC FEAST chip, which
nobody seems to ever use, including SMC). Now if only we could convince
3Com, Intel or whoever to cough up some documentation for gigabit
ethernet hardware.
Also updated RELNOTEX.TXT to mention that the SVEC PN102TX is supported
by the Macronix driver (assuming you actually have an SVEC PN102TX with
a Macronix chip on it; I tried to order a PN102TX once and got a box
labeled 'Hawking Technology PN102TX' that had a VIA Rhine board inside
it).
-add "depends" to list of recursive targets
-consistent capitilization of FreeBSD.ORG
-remove description of PATCH_DEBUG
-add .Xr to portcheckout(1) and pib(1)
ISDN4BSD is the work of our brand-new comitter: Hellmuth Michaelis,
who has done a tremendous amount of work to bring us this far.
There are still some outstanding issues and files to bring into
the tree, and for now it will be needed to pick up all the extra
docs from the isdn4bsd release.
It is probably also a very good idea to subscribe to the isdn@freebsd.org
mailing list before you try this out.
These files correspond to release "beta Version 0.70.00 / December
1998" from Hellmuth.
- Get the (tm) signal correct in nroff versions
- Correct highlighting (docs/9196)
Sigh. This is still a long way from being correct. In particular,
the states are both incorrect, and they don't format properly in
troff. But it will have to wait until I stop changing the meanings of
the states.
hacker -> intruder (couldn't desired between this and 'cracker')
config -> configuration
sorted crossreferences
spell checked
Overall very good content, but we need one of our wordsmiths to change the
tone to match the CSRG manpages.
corelate
corelated
corelation
corelative
corelatively
My Random-House dictionary doesn't list them, and grog says (paraphrased):
SOED only accepts 'corelate's, and it just notes corelate as an
alternative (and obviously not exactly mainstream) spelling for
correlate.
(yes these spellings tripped me)
ethernet driver.
The BUGS section is still impressive, but the driver seems to work for
me now. Disclaimer: i haven't been able to test this under -current
so far (but it compiles, and the notebook it's intended for can now be
updated to -current more easy than before). Don't be afraid of the
many #ifdefs on __FreeBSD_version in the imported file; i want them in
the repository on the vendor-branch so other people can also manually
integrate it into older systems. I'll clean it up on the -current
branch in a followup commit. The vendor-banch version right now
supports systems back to 2.2R.
This driver should be layered upon ppc(4), but i currently have no
idea how to do this.
Eventually i'll further develop the driver to also support the more
modern RTL 8012 success, which seems to be present in a number of
cheap pocket ethernet adapters these days. Right now, i doubt it will
run with the 8012 without any changes.
Finally a big Thanks! to RealTek for promptly providing me with
documentation and with the source code for the 8012 pocket driver upon
request. I wish all vendors were that cooperative!.
mechanisms. It is a little light on detail but still a pretty good
overview. I suggest that for specific detail (such as, for example,
how to setup kerberos), that additional security-DETAILNAME man pages
be written and refered to.
don't recurse in "make describe". The new INDEX target in
ports/Makefile invokes a perl script to recurse and convert them
into package names.
While I'm here, change the name of targets and move them around a
little bit for the sake of consistency.
It is also probably worth noting here that the meaning of the
"build dependency" list in INDEX has been changed slightly
changed. The old list was "build depends and its build depends"
-- not particularly useful if you had things like autoconf, which
run-depend on gm4 (you install all the things listed here and
you'll get an autoconf that won't run).
It is now "build depends and its run depends" -- you install
everything listed here, and you'll be able to build the port.
Submitted by: steve
(0') Fast README.html generation. It uses ports/INDEX to find
dependencies instead of embarking on to a recursive loop.
Submitted by: steve
(1) Remove NO_WRKDIR and NO_EXTRACT. Their functionality are easily
replacable with NO_WRKSUBDIR=t and EXTRACT_ONLY= (nothing on right
side), and they get in the way of read-only port trees.
(2) Surround first few variable definitions with ".if !defined()".
This will make cross-compilation easier and also speed up make
processes.
(3) Call sysctl with absolute path. Prefer the one in /sbin over the
one in /usr/sbin.
(4) Add four new variables
PKGINSTALL?= ${PKGDIR}/INSTALL
PKGDEINSTALL?= ${PKGDIR}/DEINSTALL
PKGREQ?= ${PKGDIR}/REQ
PKGMESSAGE?= ${PKGDIR}/MESSAGE
and use them in PKG_ARGS. Frobbing with PKG_ARGS directly is
strongly discouraged.
(5) Change PKG_SUFX to ".tar" (instead of ".tgz") if PKG_NOCOMPRESS is
defined. This is intended only for our own use.
(6) Add more sites to MASTER_SITE_GNU.
Submitted by: billf
(7) Override MANUAL_PACKAGE_BUILD if PARALLEL_PACKAGE_BUILD is
defined. This is intended only for our own use.
(8) Add new target "ignorelist" which will print out the package name
if the port is not going to be built on this machine. This is
intended only for our own use.
(9) Make mtree a little quieter.
that are misinterpreted by echo(1) aren't.
PR: docs/8757
Submitted By: Takeshi OHASHI <ohashi@mickey.ai.kyutech.ac.jp>
Sergei Laskavy <laskavy@gambit.msk.su>
as a RealTek 8139
if_rlreg.h: use bus_space_read_X() in CSR_READ_X() macros instead of
directly calling inb()/outb() etc...
rl.4 + RELNOTES.TXT: mention that SMC EtherEZ PCI 1211-TX is supported
by the RealTek driver
PCI fast ethernet adapters, plus man pages.
if_pn.c: Netgear FA310TX model D1, LinkSys LNE100TX, Matrox FastNIC 10/100,
various other PNIC devices
if_mx.c: NDC Communications SOHOware SFA100 (Macronix 98713A), various
other boards based on the Macronix 98713, 98713A, 98715, 98715A
and 98725 chips
if_vr.c: D-Link DFE530-TX, other boards based on the VIA Rhine and
Rhine II chips (note: the D-Link and certain other cards
that actually use a Rhine II chip still return the PCI
device ID of the Rhine I. I don't know why, and it doesn't
really matter since the driver treats both chips the same
anyway.)
if_wb.c: Trendware TE100-PCIE and various other cards based on the
Winbond W89C840F chip (the Trendware card is identical to
the sample boards Winbond sent me, so who knows how many
clones there are running around)
All drivers include support for ifmedia, BPF and hardware multicast
filtering.
Also updated GENERIC, LINT, RELNOTES.TXT, userconfig and
sysinstall device list.
I also have a driver for the ASIX AX88140A in the works.
break one way or another. With it goes the package-loop and the
describe loop.
(2) Add new variable MASTERDIR to make it easier to share files between ports.
bsd.port.mk will find things like ${PKGDIR} underneath
${MASTERDIR} (which defaults to ${.CURDIR}).
(3) Do not allow MD5_FILE to be renamed. Funny things can happen if
you do that.
(4) Use a few more absolute paths in the bsd.port.pre.mk part. I
can't use absolute paths for sysctl because it moved recently.
