that works in the new threaded kernel. It was commented out of
the disksort routine earlier this year for the reasons given in
kern/subr_disklabel.c (which is where this code used to reside
before it moved to kern/subr_disk.c):
----------------------------
revision 1.65
date: 2002/04/22 06:53:20; author: phk; state: Exp; lines: +5 -0
Comment out Kirks io-request priority hack until we can do this in a
civilized way which doesn't cause grief.
The problem is that it is not generally safe to cast a "struct bio
*" to a "struct buf *". Things like ccd, vinum, ata-raid and GEOM
constructs bio's which are not entrails of a struct buf.
Also, curthread may or may not have anything to do with the I/O request
at hand.
The correct solution can either be to tag struct bio's with a
priority derived from the requesting threads nice and have disksort
act on this field, this wouldn't address the "silly-seek syndrome"
where two equal processes bang the diskheads from one edge to the
other of the disk repeatedly.
Alternatively, and probably better: a sleep should be introduced
either at the time the I/O is requested or at the time it is completed
where we can be sure to sleep in the right thread.
The sleep also needs to be in constant timeunits, 1/hz can be practicaly
any sub-second size, at high HZ the current code practically doesn't
do anything.
----------------------------
As suggested in this comment, it is no longer located in the disk sort
routine, but rather now resides in spec_strategy where the disk operations
are being queued by the thread that is associated with the process that
is really requesting the I/O. At that point, the disk queues are not
visible, so the I/O for positively niced processes is always slowed
down whether or not there is other activity on the disk.
On the issue of scaling HZ, I believe that the current scheme is
better than using a fixed quantum of time. As machines and I/O
subsystems get faster, the resolution on the clock also rises.
So, ten years from now we will be slowing things down for shorter
periods of time, but the proportional effect on the system will
be about the same as it is today. So, I view this as a feature
rather than a drawback. Hence this patch sticks with using HZ.
Sponsored by: DARPA & NAI Labs.
Reviewed by: Poul-Henning Kamp <phk@critter.freebsd.dk>
NB: But it will enable it in all kernels not having options "NO_GEOM"
Put the GEOM related options into the intended order.
Add "options NO_GEOM" to all kernel configs apart from NOTES.
In some order of controlled fashion, the NO_GEOM options will be
removed, architecture by architecture in the coming days.
There are currently three known issues which may force people to
need the NO_GEOM option:
boot0cfg/fdisk:
Tries to update the MBR while it is being used to control
slices. GEOM does not allow this as a direct operation.
SCSI floppy drives:
Appearantly the scsi-da driver return "EBUSY" if no media
is inserted. This is wrong, it should return ENXIO.
PC98:
It is unclear if GEOM correctly recognizes all variants of
PC98 disklabels. (Help Wanted! I have neither docs nor HW)
These issues are all being worked.
Sponsored by: DARPA & NAI Labs.
treat it as an invalid partition.
This fixes a bug where ``dumpon <device>'' will configure the dump
device at a random offset on the disk if <device> isn't a valid
partition.
Reviewed by: phk
and predictable way, and I apologize if I have gotten it wrong anywhere,
getting prior review on a patch like this is not feasible, considering
the number of people involved and hardware availability etc.)
If struct disklabel is the messenger: kill the messenger.
Inside struct disk we had a struct disklabel which disk drivers used to
communicate certain metrics to the disklayer above (GEOM or the disk
mini-layer). This commit changes this communication to use four
explicit fields instead.
Amongst the benefits is that the fields do not get overwritten by
wrong or bogus on-disk disklabels.
Once that is clear, <sys/disk.h> which is included in the drivers
no longer need to pull <sys/disklabel.h> and <sys/diskslice.h> in,
the few places that needs them, have gotten explicit #includes for
them.
The disklabel inside struct disk is now only for internal use in
the disk mini-layer, so instead of embedding it, we malloc it as
we need it.
This concludes (modulus any mistakes) the series of disklabel related
commits.
I belive it all amounts to a NOP for all the rest of you :-)
Sponsored by: DARPA & NAI Labs.
Rename bioqdisksort() to bioq_disksort().
Keep a #define around to avoid changing all diskdrivers right now.
Move it from subr_disklabel.c to subr_disk.c.
Move prototype from <sys/disklabel.h> to <sys/bio.h>
Sponsored by: DARPA and NAI Labs.
Rename diskerr() to disk_err() for naming consistency.
Drop the by now entirely useless struct disklabel argument.
Add a flag argument for new-line termination.
Fix a couple of printf-format-casts to %j instead of %l.
Correctly print the name of all bio commands.
Move the function from subr_disklabel.c to subr_disk.c,
and from <sys/disklabel.h> to <sys/disk.h>.
Use the new disk_err() throughout, #include <sys/disk.h> as needed.
Bump __FreeBSD_version for the sake of the aac disk drivers #ifdefs.
Remove unused disklabel members of softc for aac, amr and mlx, which seem
to originally have been intended for diskerr() use, but which only rotted
and got Copy&Pasted at least two times to many.
Sponsored by: DARPA & NAI Labs.
Caveats:
The new savecore program is not complete in the sense that it emulates
enough of the old savecores features to do the job, but implements none
of the options yet.
I would appreciate if a userland hacker could help me out getting savecore
to do what we want it to do from a users point of view, compression,
email-notification, space reservation etc etc. (send me email if
you are interested).
Currently, savecore will scan all devices marked as "swap" or "dump" in
/etc/fstab _or_ any devices specified on the command-line.
All architectures but i386 lack an implementation of dumpsys(), but
looking at the i386 version it should be trivial for anybody familiar
with the platform(s) to provide this function.
Documentation is quite sparse at this time, more to come.
Details:
ATA and SCSI drivers should work as the dump formatting code has been
removed. The IDA, TWE and AAC have not yet been converted.
Dumpon now opens the device and uses ioctl(DIOCGKERNELDUMP) to set
the device as dumpdev. To implement the "off" argument, /dev/null
is used as the device.
Savecore will fail if handed any options since they are not (yet)
implemented. All devices marked "dump" or "swap" in /etc/fstab
will be scanned and dumps found will be saved to diskfiles
named from the MD5 hash of the header record. The header record
is dumped in readable format in the .info file. The kernel
is not saved. Only complete dumps will be saved.
All maintainer rights for this code are disclaimed: feel free to
improve and extend.
Sponsored by: DARPA, NAI Labs
non-existent disk in a legacy /dev on a DEVFS system would panic the system
if stat(2)'ed.
Do not whine about anonymous device nodes not having a si_devsw, they're
not supposed to.
Make it a panic to repeat make_dev() or destroy_dev(), this check
should maybe be neutered when -current goes -stable.
Whine if devsw() is called on anon dev_t's in a devfs system.
Make a hack to avoid our lazy-eval disk code triggering the above whine.
Fix the multiple make_dev() in disk code by making ${disk}${unit}s${slice}
an alias/symlink to ${disk}${unit}s${slice}c
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
label if the dump device overflaps the label (which is a slight
misconfiguration). Dump routines don't use dscheck(), so the normal
write protection of the label doesn't help.
Reduced some nearby overflow bugs. In disk_dumpcheck(), there was
(fatal but fail-safe) overflow on i386's with 4GB of memory, at least
if Maxmem was the top page (can this happen?). The fix assumes that
the sector size divides PAGE_SIZE (dump routines already assume this).
In setdumpdev(), the corresponding overflow occurred with only about
2GB of memory on all machines with 32-bit ints. This allowed setdumpdev()
to succeed when it shouldn't have, but then disk_dumpcheck() failed
safe later. Except in old versions of FreeBSD like RELENG_3 where
there is no disk_dumpcheck().
PR: 28164 (label clobbering part)
MFC after: 1 week
dev_t. The dev_depends(dev_t, dev_t) function is for tying them
to each other.
When destroy_dev() is called on a dev_t, all dev_t's depending
on it will also be destroyed (depth first order).
Rewrite the make_dev_alias() to use this dependency facility.
kern/subr_disk.c:
Make the disk mini-layer use dependencies to make sure all
relevant dev_t's are removed when the disk disappears.
Make the disk mini-layer precreate some magic sub devices
which the disk/slice/label code expects to be there.
kern/subr_disklabel.c:
Remove some now unneeded variables.
kern/subr_diskmbr.c:
Remove some ancient, commented out code.
kern/subr_diskslice.c:
Minor cleanup. Use name from dev_t instead of dsname()
cloning infrastructure standard in kern_conf. Modules are now
the same with or without devfs support.
If you need to detect if devfs is present, in modules or elsewhere,
check the integer variable "devfs_present".
This happily removes an ugly hack from kern/vfs_conf.c.
This forces a rename of the eventhandler and the standard clone
helper function.
Include <sys/eventhandler.h> in <sys/conf.h>: it's a helper #include
like <sys/queue.h>
Remove all #includes of opt_devfs.h they no longer matter.
Remove old DEVFS support fields from dev_t.
Make uid, gid & mode members of dev_t and set them in make_dev().
Use correct uid, gid & mode in make_dev in disk minilayer.
Add support for registering alias names for a dev_t using the
new function make_dev_alias(). These will show up as symlinks
in DEVFS.
Use makedev() rather than make_dev() for MFSs magic devices to prevent
DEVFS from noticing this abuse.
Add a field for DEVFS inode number in dev_t.
Add new DEVFS in fs/devfs.
Add devfs cloning to:
disk minilayer (ie: ad(4), sd(4), cd(4) etc etc)
md(4), tun(4), bpf(4), fd(4)
If DEVFS add -d flag to /sbin/inits args to make it mount devfs.
Add commented out DEVFS to GENERIC
insertion of a CF card, for random values of N > 1. With these fixes,
I've been able to do 100 insert/remove of the cards w/o a crash with
lots of system activity going on that in the past would help trigger
the crash.
The problem:
FreeBSD creates dev_t's on the fly as they are needed and never
destroys them. These dev_t's point to a struct disk that is used for
housekeeping on the disk. When a device goes away, the struct disk
pointer becomes a dangling pointer. Sometimes when the device comes
back, the pointer will point to the new struct disk (in which case the
insertion will work). Other times it won't (especially if any length
of time has passed, since it is dependent on memory returned from
malloc).
The Fix:
There is one of these dev_t's that is always correct. The
device for the WHOLE_DISK_SLICE is always right. It gets set at
create_disk() time. So, the fix is to spend a little CPU time and
lookup the WHOLE_DISK_SLICE dev_t and use the si_disk from that in
preference to the one that's in the device asking to do the I/O. In
addition, we change the test of si_disk == NULL meaning that the dev
needed to inherit properties from the pdev to dev->si_disk !=
pdev->si_disk. This test is a little stronger than the previous test,
but can sometimes be fooled into not inheriting. However, the results
of this fooling are that the old values will be used, which will
generally always be the same as before. si_drv[12] are the only
values that are copied that might pose a problem. They tend to change
as the si_disk field would change, so it is a hole, but it is a small
hole.
One could correctly argue that one should replace much of this code
with something much much better. I would be on the pro side of that
argument.
Reviewed by: phk (who also ported the original patch to current)
Sponsored by: Timing Solutions
need this RSN.
Remove a pointless warning in the root device locating code.
Remove the "wd" compatibility name from the "ad" driver.
WARNING: If you have not updated to use /dev/wd* in your /etc/fstab
and modern bootblocks, it would be a very good idea to do so BEFORE
you upgrade your kernel.
<sys/bio.h>.
<sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall
not be made a nested include according to bdes teachings on the
subject of nested includes.
Diskdrivers and similar stuff below specfs::strategy() should no
longer need to include <sys/buf.> unless they need caching of data.
Still a few bogus uses of struct buf to track down.
Repocopy by: peter
