_Unwind_ForcedUnwind in libgcc_s takes as one of it's parameters a stop
function to tell it when to stop unwinding. One of the stop function's
parameters is a _Unwind_Exception_Class. On most architectures this is an
int64_t, however on ARM EABI the gcc developers have made this a char array
with 8 items. While both of these take the same space they are passed into
the stop function differently, an int64_t is passed in in registers r2 and
r3, while the char[8] is passed in as a pointer to the first item in
register r2.
Because libthr expects the value to be an int64_t we would get incorrect
results when it passes a function that take an int64_t but libgcc passes in
a pointer to a char array including crashing.
The fix is to update libgcc_s to make it pass an int64_t to the stop
function and to libstdc++ as it expects _Unwind_Exception_Class to be an
array.
.note.ABI-tag section.
This helps on ARM EABI where the OS/ABI field is zero. It would be better
to use the NOTES program header however this would require a more invasive
change.
a few duplicates. This should fix building world with -stdlib=libc++
after r246028.
Submitted by: Yamaya Takashi <yamayan@kbh.biglobe.ne.jp>
MFC after: 1 week
X-MFC-With: r246028
The crunchide utility presumes the last 3 chunks of an ELF object
layout are section headers, symbol table, and then string table.
However, this is not specified in the ELF standards, and linkers
may generate different layouts when doing partial linking (-r).
This change is required to build FreeBSD with mclinker or the
gold linker.
PR: bin/174011
Submitted by: Pete Chou
Reviewed by: Cristoph Mallon
MFC after: 2 weeks
Now they are split into two pairs: page_hold/page_unhold for mappedread
and page_busy/page_unbusy for update_pages.
For mappedread we simply hold a page that is to be used as a source if it
is resident and valid (and not busy). This is sufficient since we are
only doing page -> user buffer copying. There is no page <-> backing
storage I/O involved.
update_pages is now better split to properly handle the putpages case
(page -> arc) and the regular write case (arc -> page).
For the latter we use complete protocol of marking an object with
paging-in-progress and marking a page with io_start (busy count).
Also, in this case we remove the write bit from all page mappings and
clear dirty bits of the pages, the former is needed to ensure that the
latter does the right thing.
Additionally we update a page if it is cached instead of just freeing it
as was done before. This needs to be verified.
A minor detail: ZFS-backed pages should always be either fully valid
or fully invalid. Assert this and use simpler API that does not deal
with sub-page blocks.
Reviewed by: kib
MFC after: 26 days
has gone below zero after the blocks in its inode are freed is a
no-op which the compiler fails to warn about because of the use of
the DIP macro. Change the sanity check to compare the number of
blocks being freed against the value i_blocks. If the number of
blocks being freed exceeds i_blocks, just set i_blocks to zero.
Reported by: Pedro Giffuni (pfg@)
MFC after: 2 weeks
Expand here documents at the same point other redirections are expanded but
use a non-fork subshell environment (like simple command substitutions) for
compatibility. Substitition errors result in an empty here document like
before.
As a result, a fork is avoided for short (<4K) expanded here documents.
Unexpanded here documents (with quoted end marker after <<) are not affected
by this change. They already only forked when >4K.
Side effects:
* Order of expansion is slightly different.
* Slow expansions are not executed in parallel with the redirected command.
* A non-fork subshell environment is subtly different from a forked process.
- Use ln -fs to create a symlink.
- Remove pkgadd for docports.
- Use WITHOUT_JADETEX=yes instead of WITH_JADETEX=no.
- Add {WORLD,KERNEL}_FLAGS to [BTWK]MAKE.
- Use makefs(8) and gpart(8) for sparc64 ISO image[2].
- Add publisher option to makefs(8)[2].
Based on work by: gjb[1]
Discussed with: marius, nwhitehorn[2]
Only during very early boot, before malloc(9) is functional (SI_SUB_KMEM),
the static ktr_buf_init is used. Size of the static buffer is determined
by a new kernel option KTR_BOOT_ENTRIES. Its default value is 1024.
This commit builds on top of r243046.
Reviewed by: alc
MFC after: 17 days
Major changes:
* Finally tracked down the flow control setting that
seems to have been causing TX stalls and watchdog timeouts
* RX and TX paths now share a lot more code
* TX interrupt is no longer used; we instead GC finished
tx queue entries at the bottom of the start routine.
* TX start now queues fragmented packets directly; it only
invokes defrag() for occasional very fragmented packets.
* "sysctl dev.cpsw" dumps controller statistics and queue counts
* Host Error Interrupt will give extensive debugging information
if the controller chokes on the queued data.
Dont use/link ARCMT, StaticAnalyzer and Rewriter to clang when the user
specifies not to. Dont build ASTMatchers with Rewriter disabled and
StaticAnalyzer when it's disabled.
Without all those three, the clang binary shrinks (x86_64) from ~36MB
to ~32MB (unstripped).
To disable these clang components, and get a smaller clang binary built
and installed, set WITHOUT_CLANG_FULL in src.conf(5). During the
initial stages of buildworld, those extra components are already
disabled automatically, to save some build time.
MFC after: 1 week
- Remove unused extern declarations in fs.h
- Correct comments in ext2_dir.h
- Several panic() messages showed wrong function names.
- Remove commented out stray line in ext2_alloc.c.
- Remove the unused macro EXT2_BLOCK_SIZE_BITS() and the then
write-only member e2fs_blocksize_bits from struct m_ext2fs.
- Remove the unused macro EXT2_FIRST_INO() and the then write-only
member e2fs_first_inode from struct m_ext2fs.
- Remove EXT2_DESC_PER_BLOCK() and the member e2fs_descpb from
struct m_ext2fs.
- Remove the unused members e2fs_bmask, e2fs_dbpg and
e2fs_mount_opt from struct m_ext2fs
- Correct harmless off-by-one error for fspath in ext2_vfsops.c.
- Remove the unused and broken macros EXT2_ADDR_PER_BLOCK_BITS()
and EXT2_DESC_PER_BLOCK_BITS().
- Remove the !_KERNEL versions of the EXT2_* macros.
Submitted by: Christoph Mallon
MFC after: 2 weeks
passed in by smartd of smartmontools.
While at it, hint the compiler that 32-bit PIO is the most likely
case (idea from Linux) and use bus_{read,write}_stream_2(9) instead
of bus_{read,write}_multi_stream_2(9) for single count reads/writes.
MFC after: 1 week
This hack is picked up from Linux, which claims that it follows
Windows behavior.
PR: amd64/174409
Tested by: Sergey V. Dyatko <sergey.dyatko@gmail.com>,
KAHO Toshikazu <kaho@elam.kais.kyoto-u.ac.jp>,
Slawa Olhovchenkov <slw@zxy.spb.ru>
MFC after: 13 days
- change 'pics' from STAILQ to TAILQ
- ensure that Local APIC is always first in 'pics'
Reviewed by: jhb
Tested by: Sergey V. Dyatko <sergey.dyatko@gmail.com>,
KAHO Toshikazu <kaho@elam.kais.kyoto-u.ac.jp>
MFC after: 12 days
And provide kernel compiler version as a sysctl as well.
This is useful while we have gcc and clang cohabitation.
This could be even more useful when we have support
for external toolchains.
In cooperation with: mjg
MFC after: 13 days
Also sanitize interface names that can potentially contain characters
that are prohibited in netgraph names.
PR: kern/154850 (sanitizing of names)
Discussed with: eri, melifaro
Submitted by: Nikolay Denev <ndenev@gmail.com> (sanitizing code)
Reviewed by: eri, glebius
MFC after: 17 days
- there is no such flag in Solaris and derivatives
- the flag was added in an unrelated change
- the flag is not used
The proper way to allocate zeroed out memory is to use kmem_zalloc.
MFC after: 3 days
x86 buses
Otherwise the uart hardware could be in such a state after the resume
where IER is cleared and thus no interrupts are generated.
This behavior is observed and tested with QEMU, so I am comitting this
change to help with my debugging.
There has been no feedback from users of serial ports on real hardware.
MFC after: 20 days
This should allow the kernel linker to easily detect a situation
when the module is present both in a kernel and in a preloaded file
(zfs.ko).
Reviewed by: jhb
MFC after: 5 days
track the MNT_SYNCHRONOUS flag. It is set to the latter at mount time
but not updated by MNT_UPDATE.
Use MNT_SYNCHRONOUS to decide to write the FAT updates syncrhonously.
Submitted by: bde
MFC after: 1 week
a directory to a subdir of the root directory from somewhere else.
For all directory moves that change the parent directory, the dotdot
entry must be fixed up. For msdosfs, the root directory is magic for
non-FAT32. It is less magic for FAT32, but needs the same magic for
the dotdot fixup. It didn't have it.
Both chkdsk and fsck_msdosfs fix the corrupt directory entries with no
problems.
The fix is to use the same magic for dotdot in msdosfs_rename() as in
msdosfs_mkdir().
For msdosfs_mkdir(), document the magic. When writing the dotdot entry
in mkdir, use explicitly set pcl variable instead on relying on the
start cluster of the root directory typically has a value < 65536.
Submitted by: bde
MFC after: 1 week
Trying FAT32 on a small partition failed to mount because
pmp->pm_Sectors was nonzero. Normally, FAT32 file systems are so
large that the 16-bit pm_Sectors can't hold the size. This is
indicated by setting it to 0 and using only pm_HugeSectors. But at
least old versions of newfs_msdos use the 16-bit field if possible,
and msdosfs supports this except for breaking its own support in the
sanity check. This is quite different from the handling of pm_FATsecs
-- now the 16-bit value is always ignored for FAT32 except for
checking that it is 0, and newfs_msdos doesn't use the 16-bit value
for FAT32.
Submitted by: bde
MFC after: 1 week
the default.
The current behavior of advertising a single MSI vector can be requested by
setting the environment variable "BHYVE_USE_MSI" to "yes". The use of MSI
is not compliant with the virtio specification and will be eventually phased
out.
Submitted by: Gopakumar T
Obtained from: NetApp
