PowerPC, and possibly other architectures, use different address ranges for
PCI space vs physical address space, which is only mapped at resource
activation time, when the BAR gets written. The DRM kernel modules do not
activate the rman resources, soas not to waste KVA, instead only mapping
parts of the PCI memory at a time. This introduces a
BUS_TRANSLATE_RESOURCE() method, implemented in the Open Firmware/FDT PCI
driver, to perform this necessary translation without activating the
resource.
In addition to system KPI changes, LinuxKPI is updated to handle a
big-endian host, by adding proper endian swaps to the I/O functions.
Submitted by: mmacy
Reported by: hselasky
Differential Revision: https://reviews.freebsd.org/D21096
The flag handling was committed commented out 7 years ago. It works, and is
needed for LinuxKPI-based DRM drivers.
Also mark a local as potentially unusable, as it's only really used when KTR
is enabled.
Submitted by: mmacy
When the ipfilter kld is loaded, used within VNET jail, and unloaded,
then subsequent loading, use, and unloading of another packet filters
will cause the subsequently loaded netpfil kld's to panic.
The scenario is as follows:
cd /usr/tests/sys/netpfil/common
kldunload ipl
kldunload pfsync
kldunload ipfw
kyua test pass_block
kldload ipl
kyua test pass_block
kldunload ipl
kldload pfsync
kyua test pass_block
kldunload pfsync
-- page fault panic occurs here --
Reported by: "Ahsan Barkati" <ahsanbarkati@g.....com> via kp@
Discussed with: kp@
Tested by: kp@
MFC after: 3 days
It allows to delete all user data from NVM subsystem in one of 3 methods.
It is a close equivalent of SCSI SANITIZE command of `camcontrol sanitize`,
so I tried to keep arguments as close as possible.
While there, fix supported sanitize methods reporting in `identify`.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
PTI-mode entry points were coded to set up the environment identical
to non-PTI entry and then fall-through to non-PTI handlers, mostly.
This has the drawback of requiring two more SWAPGS, first to access
PCPU, and then to return to the state expected by the non-PTI entry
point.
Eliminate the duplication by doing more in entry stubs both for PTI
and non-PTI, and adjusting the common code to expect that SWAPGS and
some minimal registers saving is done by entries.
Some less often used entries, in particular, #GP, #NP, and #SS, which
can fault on doreti, are left as is because there are basically four
variants of entrance, and they are not performance-critical,
esp. comparing with e.g. #PF or interrupts.
Reviewed by: markj (previous version)
Tested by: pho (previous version)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
physical destination mode.
This is mostly a nop, because the vmm initializes all vCPUs up to
vm_maxcpus, so even if the target CPU is not active, lapic/vlapic code
still has the valid data to use. As John notes, dropping such
interrupts more closely matches the real harware, which ignores all
interrupts for not started APs.
Reviewed by: jhb
admbugs: 837
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Bring back systm.h after r350532 and banish errno.h, time.h, and
machine/atomic.h.
Reported by: bde (Thank you!)
Pointyhat to: bz
MFC after: 12 weeks
X-MFC: with r350532
Sponsored by: Netflix
Add capsicum support to ping6, mostly copying the strategy used for ping.
Submitted by: Ján Sučan <jansucan@gmail.com>
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Google, inc. (Google Summer of Code 2019)
Differential Revision: https://reviews.freebsd.org/D21050
Freeze clearing needs to heppen any time OPAL reads return either an error
(except OPAL_HARDWARE), AND any time it returns 0xff for all bytes.
For cfgwrite, any error that's not OPAL_HARDWARE should be cleaned up.
Previously, AcpiOsMemory was using pmap_mapbios which would always map
the requested address Write-Back (WB). For several AMD Ryzen laptops,
the BIOS uses AcpiOsMemory to directly access the PCI MCFG region in
order to access PCI config registers. This has the side effect of
remapping the MCFG region in the direct map as WB instead of UC
hanging the laptops during boot.
On the one laptop I examined in detail, the _PIC global method used to
switch from 8259A PICs to I/O APICs uses a pair of PCI config space
registers at offset 0x84 in the device at 0:0:0 to as a pair of
address/data registers to access an indirect register in the chipset
and clear a single bit to switch modes.
To fix, alter the semantics of pmap_mapbios() such that it does not
modify the attributes of any existing mappings and instead uses the
existing attributes. If a new mapping is created, this new mapping
uses WB (the default memory attribute).
Special thanks to the gentleman whose name I don't have who brought
two affected laptops to the hacker lounge at BSDCan. Direct access to
the affected systems permitted finding the root cause within an hour
or so.
PR: 231760, 236899
Reviewed by: kib, alc
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20327
Having the full uname output can be useful on head even with
unmodified trees or trees that newvers.sh fails to recognize as
modified.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D20895
These vnodes are explicitly opened via VOP_OPEN via
exec_check_permissions identical to the main exectuable image.
Setting ISOPEN allows filesystems to perform suitable checks in
VOP_LOOKUP (e.g. close-to-open consistency in the NFS client).
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D21129
memory barrier between the stores for initializing a page table page and
the store for adding that page to the page table. Otherwise, a page table
walk by another processor's MMU could see the page table page before it
sees the initialized entries.
Simplify pmap_growkernel(). In particular, eliminate an unnecessary TLB
invalidation.
Reviewed by: andrew, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21126
In particular: Changed Namespace List, Commands Supported and Effects,
Reservation Notification, Sanitize Status.
Add few new arguments to `nvmecontrol log` subcommand.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Previously we would check for blessings before marking a given lock
pair as reversed, so each "reversed" lock acquisition would require
a linear scan of the table. Instead, check the table after marking
the pair as reversed but before generating a report.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21135
Removing the prototype from the header and making the function static
in r350533 makes architectures using gcc complain "function declaration
isn't a prototype". Add the missing void given the function has no
arguments.
Reported by: the CI machinery
Pointyhat to: bz
MFC after: 3 months
X-MFC with: r350533
Sponsored by: Netflix
Rename M_FTABLE to M_FRAG6 as the former sounds very much like the former
"flowtable" rather than anything to do with fragments and reassembly.
While here, let malloc( , .. | M_ZERO) do the zeroing rather than calling
bzero() ourselves.
MFC after: 3 months
Sponsored by: Netflix
Remove all the #if 0 and #if notyet blocks of dead code which have been
there for at least 18 years from what I can see.
No functional changes.
MFC after: 3 months
Sponsored by: Netflix
Move the sysctls and the related variables only used in frag6.c
into the file and out of in6_proto.c. That way everything belonging
together is in one place.
Sort the variables into global and per-vnet scopes and make
them static. No longer export the (helper) function
frag6_set_bucketsize() now also file-local only.
Should be no functional changes, only reduced public KPI/KBI surface.
MFC after: 3 months
Sponsored by: Netflix
Sort includes and remove duplicate kernel.h as well as the unneeded
systm.h.
Hide the mac framework incude behind #fidef MAC.
MFC after: 3 months
Sponsored by: Netflix
Finish what was started a few years ago and harmonize IPv6 and IPv4
kernel names. We are down to very few places now that it is feasible
to do the change for everything remaining with causing too much disturbance.
Remove "aliases" for IPv6 names which confusingly could indicate
that we are talking about a different data structure or field or
have two fields, one for each address family.
Try to follow common conventions used in FreeBSD.
* Rename sin6p to sin6 as that is how it is spelt in most places.
* Remove "aliases" (#defines) for:
- in6pcb which really is an inpcb and nothing separate
- sotoin6pcb which is sotoinpcb (as per above)
- in6p_sp which is inp_sp
- in6p_flowinfo which is inp_flow
* Try to use ia6 for in6_addr rather than in6p.
* With all these gone also rename the in6p variables to inp as
that is what we call it in most of the network stack including
parts of netinet6.
The reasons behind this cleanup are that we try to further
unify netinet and netinet6 code where possible and that people
will less ignore one or the other protocol family when doing
code changes as they may not have spotted places due to different
names for the same thing.
No functional changes.
Discussed with: tuexen (SCTP changes)
MFC after: 3 months
Sponsored by: Netflix
The ARMv8 reference manual only states that the bit is reserved in
this case; following Linux's example, use it instead of a
software-defined bit for the purpose of indicating that a managed
mapping is writable.
Reviewed by: alc, andrew
MFC after: r350004
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21121
While very useful by itself, it also makes `nvmecontrol` not depend on
hardcoded device names parsing, that in its turn makes simple to take
nvdX (and potentially any other) device names as arguments.
Also added IOCTL bypass from nvdX to respective nvmeYnsZ makes them
interchangeable for management purposes.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Rename the variable for the in6_addr from in6p to ia6 to follow the
convention generally used in FreeBSD.
No functional changes.
MFC after: 3 months
Sponsored by: Netflix
chunk. This also plugs an potential mbuf leak.
Thanks to Felix Weinrank for reporting this issue found by fuzz-testing
the userland stack.
MFC after: 3 days
In the future FreeBSD will ship without GNU binutils 2.17.50. Add a
note advising users who require GNU as to install the binutils port
or package.
Note that on armv7, arm64, amd64, i386 we currently ship only two
binutils tools (as and objdump). A deprecation notice was added to
objdump's man page some time ago.
PR: 233611
Discussed with: jhb
MFC after: 1 week
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
