This should allow these functions to work for Medford as well.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4866
All these fields will be used in shared ef10 code, so put them in an
ef10 member of a per-architecture union, rather that in the per-chip
union.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4865
Creating some files together to do the build system changes in one go.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4859
This one mainly avoids mbuf cluster allocation for TCP ACKs during
TCP sending tests. And it gives me ~200Mbps improvement (4.7Gbps
-> 4.9Gbps), when running iperf3 TCP sending test w/ 16 connections.
While I'm here, nuke the unnecessary zeroing out pkthdr.csum_flags.
Reviewed by: adrain
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4853
Many applications and kernel modules (e.g. bridge) rely on the ifmedia
status report; give them what they want.
Submitted by: Dexuan Cui <decui microsoft com>
Reviewed by: Jun Su <junsu microsoftc com>, me, adrian
Modified by: me (minor)
Original differential: https://reviews.freebsd.org/D4611
Differential Revision: https://reviews.freebsd.org/D4852
Approved by: adrian (mentor)
Sponsored by: Microsoft OSTC
- Implement the LRO using tcp_lro APIs, and LRO is enabled by default.
- Add several stats sysctl nodes.
- Check IP/TCP length before sending the packet to tcp_lro_rx(), if host
does not provide RX csum information (*); and add an option through
sysctl to always trust host TCP segment csum checks (default is off).
- Add sysctl to control the LRO entry depth; it is disabled by default.
It is used to avoid holding too much TCP segments in driver. Limiting
the LRO entry depth helps a lot in a one/two streams RX test.
This one 3x the RX performance on my local test (3Gbps -> 10Gbps), and
~2x the RX performance over a directly connected 40Ge network (5Gbps ->
9Gbps).
(*) It seems the host stops supplying csum information, once the network
load is high. This still needs investigation...
Reviewed by: Hongjiang Zhang <honzhan microsoft com>,
Dexuan Cui <decui microsoft com>,
Jun Su <junsu microsoft com>,
delphij
Tested by: me (local),
Hongjiang Zhang <honzhan microsoft com>
(directly connected 40Ge)
Approved by: delphij (mentor), adrian (mentor, no objection)
With feedback from: delphij, Hongjiang Zhang <honzhan microsoft com>
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D4824
This will allow to restore channel list after switching interface
to more restrictive regdomain.
Tested with Intel 3945BG (wpi) only.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4863
by busdma to the blkfront driver must be an integer number of sectors,
and must be aligned in memory on a "sector" boundary.
Having these assertions yesterday would have made finding the bug fixed
in r293698 somewhat easier.
Ensure that all iSCSI sessions are correctly terminated during shutdown.
* Enhances the changes done by r286226 (D3052).
* Add shutdown post sync event to run after filesystem shutdown
(SHUTDOWN_PRI_FIRST) but before CAM shutdown (SHUTDOWN_PRI_DEFAULT).
* Changes iscsi_maintenance_thread to processes terminate in preference to
reconnect.
Reviewed by: trasz
MFC after: 2 weeks
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4429
- Add a description of Advantech PCI-1602 Rev. A boards. [1]
- Properly set up REG_ACR also for PCI-1602 Rev. A based on what the
Advantech-supplied Linux driver does.
- Additionally use the macros of <dev/ic/ns16550.h> to replace existing
magic values and get rid of trivial comments.
- Fix the style of some comments.
PR: 205359 [1]
Submitted by: Jan Mikkelsen (original patch) [1]
up to now.
The new sendfile is the code that Netflix uses to send their multiple tens
of gigabits of data per second. The new implementation features asynchronous
I/O, when I/O operations are launched, but not awaited to be complete. An
explanation of why such behavior is beneficial compared to old one is
going to be too long for a commit message, so we will skip it here.
Additional features of new syscall are extra flags, which provide an
application more control over data sent. The SF_NOCACHE flag tells
kernel that data shouldn't be cached after it was sent. The SF_READAHEAD()
macro allows to specify readahead size in pages.
The new syscalls is a drop in replacement. No modifications are required
to applications. One can take nginx binary for stable/10 and run it
successfully on head. Although SF_NODISKIO lost its original sense, as now
sendfile doesn't block, and now means something completely different (tm),
using the new sendfile the old way is absolutely safe.
Celebrates: Netflix global launch!
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
Relnotes: yes
ioat_acquire_reserve() is an extended version of ioat_acquire(). It
allows users to reserve space in the channel for some number of
descriptors. If this succeeds, it guarantees that at least submission
of N valid descriptors will succeed.
Sponsored by: EMC / Isilon Storage Division
Due to FreeBSD system-wide limits on number of MSI-X vectors
(https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=199321),
it may be desirable to allocate fewer than the maximum number
of vectors for an NVMe device, in order to save vectors for
other devices (usually Ethernet) that can take better
advantage of them and may be probed after NVMe.
This tunable is expressed in terms of minimum number of CPUs
per I/O queue instead of max number of queues per controller,
to allow for a more even distribution of CPUs per queue. This
avoids cases where some number of CPUs have a dedicated queue,
but other CPUs need to share queues. Ideally the PR referenced
above will eventually be fixed and the mechanism implemented
here becomes obsolete anyways.
While here, fix a bug in the CPUs per I/O queue calculation to
properly account for the admin queue's MSI-X vector.
Reviewed by: gallatin
MFC after: 3 days
Sponsored by: Intel
This helps immensily with our ability to operate in the Amazon Cloud.
Discussed on Intel Networking Community call this morning.
Submitted by: Jarrod Petz(petz@nisshoko.net)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D4788
the system is booted and running.
Add PHY detection logic to ixgbe_handle_mod() and add locking to
ixgbe_handle_msf() as well.
PR: 150251
Submitted by: aboyer@averesystems.com
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D3188
e1000/e1000e split in linux.
Split rxbuffer and txbuffer apart to support the new RX descriptor format
structures. Move rxbuffer manipulation to em_setup_rxdesc() to unify the
new behavior changes.
Add a RSSKEYLEN macro for help in generating the RSSKEY data structures
in the card.
Change em_receive_checksum() to process the new rxdescriptor format
status bit.
MFC after: 2 weeks
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D3447
Previously nvme(4) would revert to a signle I/O queue if it could not
allocate enought interrupt vectors or NVMe submission/completion queues
to have one I/O queue per core. This patch determines how to utilize a
smaller number of available interrupt vectors, and assigns (as closely
as possible) an equal number of cores to each associated I/O queue.
MFC after: 3 days
Sponsored by: Intel
Instead just use num_io_queues to make this determination.
This prepares for some future changes enabling use of multiple
queues when we do not have enough queues or MSI-X vectors
for one queue per CPU.
MFC after: 3 days
Sponsored by: Intel
This significantly improves parallelism in the most common case.
The taskqueue is still used whenever BIO_ORDERED bios are in flight.
This patch is based heavily on a patch from gallatin@.
MFC after: 3 days
Sponsored by: Intel
This ensures the bio flags are not read after biodone().
The ordering will still be enforced, after the bio is
submitted successfully.
MFC after: 3 days
Sponsored by: Intel
Still wait until all in-flight bios (including the ordered bio)
complete before processing more bios from the queue.
MFC after: 3 days
Sponsored by: Intel
and t_maxseg. This dualism emerged with T/TCP, but was not properly cleaned
up after T/TCP removal. After all permutations over the years the result is
that t_maxopd stores a minimum of peer offered MSS and MTU reduced by minimum
protocol header. And t_maxseg stores (t_maxopd - TCPOLEN_TSTAMP_APPA) if
timestamps are in action, or is equal to t_maxopd otherwise. That's a very
rough estimate of MSS reduced by options length. Throughout the code it
was used in places, where preciseness was not important, like cwnd or
ssthresh calculations.
With this change:
- t_maxopd goes away.
- t_maxseg now stores MSS not adjusted by options.
- new function tcp_maxseg() is provided, that calculates MSS reduced by
options length. The functions gives a better estimate, since it takes
into account SACK state as well.
Reviewed by: jtl
Differential Revision: https://reviews.freebsd.org/D3593
This optimization is not proper (and causes kernel panic),
since driver checks fw_status to optimize away parsing stage
if it was already done.
Reported by: dchagin
It was returning a pointer to stack-allocated memory, so make the
allocation at the caller instead.
Found by: clang static analyzer
Coverity: CID 1245774
Reviewed by: ed, rpaulo
Review URL: https://reviews.freebsd.org/D4740
The fd is closed later in this case. This fixes a "SS_NOFDREF on enter"
panic.
Submitted by: Krishnamraju Eraparaju @ Chelsio
Reviewed by: Steve Wise @ Open Grid Computing
