Commit Graph

11093 Commits

Author SHA1 Message Date
emaste
b07ce063c3 Regen src.conf.5 after r340150 2018-11-05 15:30:13 +00:00
eugen
ebc457d1fa Make ng_pptpgre(8) netgraph node be able to restore order for packets
reordered in transit instead of dropping them altogether.
It uses sequence numbers of PPtPGRE packets.

A set of new sysctl(8) added to control this ability or disable it:

net.graph.pptpgre.reorder_max (1) defines maximum length of node's
private reorder queue used to keep data waiting for late packets.
Zero value disables reordering. Default value 1 allows the node to restore
the order for two packets swapped in transit. Greater values allow the node
to deliver packets being late after more packets in sequence
at cost of increased kernel memory usage.

net.graph.pptpgre.reorder_timeout (1) defines time value in miliseconds
used to wait for late packets. It may be useful to increase this
if reordering spot is distant.

MFC after:	1 month
2018-11-04 19:10:44 +00:00
cem
9278c98eeb Drop ed(1) "crypto"
You should not be using DES.  You should not have been using DES for the
past 30 years.

The ed DES-CBC scheme lacked several desirable properties of a sealed
document system, even ignoring DES itself.  In particular, it did not
provide the "integrity" cryptographic property (detection of tampering), and
it treated ASCII passwords as 64-bit keys (instead of using a KDF like
scrypt or PBKDF2).

Some general approaches ed(1) users might consider to replace the removed
DES mode:

1. Full disk encryption with something like AES-XTS.  This is easy to
conceptualize, design, and implement, and it provides confidentiality for
data at rest.  Like CBC, it lacks tampering protection.  Examples include
GELI, LUKS, FileVault2.

2. Encrypted overlay ("stackable") filesystems (EncFS, PEFS?, CryptoFS,
others).

3. Native encryption at the filesystem layer.  Ext4/F2FS, ZFS, APFS, and
NTFS all have some flavor of this.

4. Storing your files unencrypted.  It's not like DES was doing you much
good.

If you have DES-CBC scrambled files produced by ed(1) prior to this change,
you may decrypt them with:

  openssl des-cbc -d -iv 0 -K <key in hex> -in <inputfile> -out <plaintext>

Reviewed by:	allanjude, bapt, emaste
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D17829
2018-11-04 17:56:16 +00:00
imp
51d8917ef5 Add missing .El 2018-11-03 01:44:37 +00:00
imp
9dd7bafad0 Document disbale_phy in ahcich sysctls. 2018-11-03 00:47:02 +00:00
brooks
7698ed5201 Make vop_symlink take a const target path.
This will enable callers to take const paths as part of syscall
decleration improvements.

Where doing so is easy and non-distruptive carry the const through
implementations. In UFS the value is passed to an interface that must
take non-const values. In ZFS, const poisoning would touch code shared
with upstream and it's not worth adding diffs.

Bump __FreeBSD_version for external API consumers.

Reviewed by:	kib (prior version)
Obtained from:	CheriBSD
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D17805
2018-11-02 14:42:36 +00:00
0mp
4efda593ef nsmb.conf(5): Document the order of configuration loading
Based on the comments in /etc/nsmb.conf.

Reviewed by:	bcr
Approved by:	krion (mentor, implicit), mat (mentor, implicit)
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D17810
2018-11-02 10:18:56 +00:00
emaste
3f3f33e710 style: remove "All rights reserved" from comment
imp removed it from the template in r333391, so remove it from the
example license header in style.9 as well.

Sponsored by:	The FreeBSD Foundation
2018-11-01 23:01:24 +00:00
0mp
d7fea02ffb CMSG_DATA(3): Use consistent variable names
The description of CMSG_FIRSTHDR used two variables (mhdr and msg) to
reference the same thing. Use msghdr consistency across the manual page
instead.

Reviewed by:	bcr
Approved by:	krion (mentor, implicit), mat (mentor, implicit)
MFC after:      1 week
Differential Revision:	https://reviews.freebsd.org/D17804
2018-11-01 15:40:57 +00:00
des
5173d1e0e0 Fix markup issues and add references to updated RFCs.
MFC after:	3 days
2018-11-01 08:17:27 +00:00
dteske
1f052ff0ad Add new rc keywords: enable, disable, delete
This adds new keywords to rc/service to enable/disable a service's
rc.conf(5) variable and "delete" to remove the variable.

When the "service_delete_empty" variable in rc.conf(5) is set to "YES"
(default is "NO") an rc.conf.d file (in /etc/ or /usr/local/etc) is
deleted if empty after modification using "service $foo delete".

Submitted by:	lme (modified)
Reviewed by:	0mp (previous version), lme, bcr
Relnotes:	yes
Sponsored by:	Smule, Inc.
Differential Revision:	https://reviews.freebsd.org/D17113
2018-10-31 20:37:12 +00:00
0mp
f1f6ac0e5f tpm(4): Add the STANDARDS and HISTORY sections
Also, link to the homepage of the BSSSD project, which developed the
original driver.

Reviewed by:	bcr, kevans
Approved by:	krion (mentor, implicit), mat (mentor, implicit)
MFC after:      1 week
Differential Revision:	https://reviews.freebsd.org/D17608
2018-10-31 12:53:58 +00:00
markj
f931b753dd Add malloc_domainset(9) and _domainset variants to other allocator KPIs.
Remove malloc_domain(9) and most other _domain KPIs added in r327900.
The new functions allow the caller to specify a general NUMA domain
selection policy, rather than specifically requesting an allocation from
a specific domain.  The latter policy tends to interact poorly with
M_WAITOK, resulting in situations where a caller is blocked indefinitely
because the specified domain is depleted.  Most existing consumers of
the _domain KPIs are converted to instead use a DOMAINSET_PREF() policy,
in which we fall back to other domains to satisfy the allocation
request.

This change also defines a set of DOMAINSET_FIXED() policies, which
only permit allocations from the specified domain.

Discussed with:	gallatin, jeff
Reported and tested by:	pho (previous version)
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D17418
2018-10-30 18:26:34 +00:00
bz
11c8430e5c Introduce an EXPERIMENTAL option for both src.conf(5) and the kernel.
In the last decade(s) we have seen both short term or long term projects
committed to the tree which were considered or even marked "experimental".
While out-of-tree development has become easier than it used to be in
CVS times, there still is a need to have the code shipping with HEAD but
not enabled by default.

While people may think about VIMAGE as one of the recent larger, long term
projects, early protocol implementations (before they are standardised)
are others.  (Free)BSD historically was one of the operating systems
which would have running code at early stages and help develop and
influence standardisation and the industry.

Give developers an opportunity to be more pro-active for early adoption
or running large scale code changes stumbling over each others but not
the user's feet.  I have not added the option to NOTES in order to avoid
breaking supported option builds, which require constant compile testing.

Discussed with:	people in the corridor
2018-10-30 15:46:30 +00:00
glebius
c8f20b1577 Add a note that epoch(9) may change, to untie our hands for any future MFCs. 2018-10-29 22:10:52 +00:00
markj
c5f66c0d3c Expose some netdump configuration parameters through sysctl.
Reviewed by:	cem
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D17755
2018-10-29 21:16:26 +00:00
tuexen
607fa263e0 Insert a .El line accidently committed in r339869.
Reported by:	gjb@
MFC after:	3 days
2018-10-29 19:25:30 +00:00
tuexen
2943272a1c Fix a nit
Reported by:	gjb@
MFC after:	3 days
2018-10-29 19:14:56 +00:00
kp
048eb33a87 pf: Make ':0' ignore link-local v6 addresses too
When users mark an interface to not use aliases they likely also don't
want to use the link-local v6 address there.

PR:		201695
Submitted by:	Russell Yount <Russell.Yount AT gmail.com>
Differential Revision:	https://reviews.freebsd.org/D17633
2018-10-28 05:32:50 +00:00
eugen
224e08c700 rcorder(8): add support for /etc/rc.resume, so it calls "rcorder -k resume"
and runs scripts containing "KEYWORD: resume" with single "resume" argument.

Working example is the port sysutils/cpupdate that defines
extra_commands="resume" to reload CPU microcode cleared
by suspend/resume sequence.

This change does nothing for a system having no scripts with KEYWORD: resume.

MFC after:		1 month
Differential Revision:	https://reviews.freebsd.org/D15247
2018-10-27 17:21:13 +00:00
tuexen
8397e600b6 Add initial descriptions for SCTP related MIB variable.
This work was mostly done by Marie-Helene Kvello-Aune.

MFC after:		3 days
Differential Revision:	https://reviews.freebsd.org/D3583
2018-10-26 21:04:17 +00:00
imp
4f1c28c8e1 Redo r339563: Remove joy(4) driver.
This driver was marked as gone in 12. We're at 13 now. Remove it.
Data from nycbug's dmesg cache shows only one potential user,
suggesting it never was used much. However, even though this device
has been obsolete for 15 years at least, sys/joystick.h is included in
a number of graphics packages still, so that remains. A full exprun
is needed before that can be removed.

RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D17629
2018-10-26 16:03:30 +00:00
imp
83bf1fdc83 Revert r339563.
I held the mistaken belief this was completely unused. While the
driver is unused and likely not relevant for a long time,
sys/joystick.h lives on in maybe half a dozen ports, even though
hardware to use it hasn't been widely used in maybe 15 years.
2018-10-26 04:10:32 +00:00
andrew
13ae22e70c Regen src.conf.5 to add WITH_BSD_CRTBEGIN
Sponsored by:	DARPA, AFRL
2018-10-25 17:42:43 +00:00
brooks
d4f6b392d7 Deprecate a number of less used 10 and 10/100 Ethernet devices.
The current deprecated list is: ae, bm, cs, de, dme, ed, ep, ex, fe,
pcn, sf, sn, tl, tx, txp, vx, wb, xe

The list as refined as part of FCP-0101. Per the FCP, devices may be
removed from the deprecation list if enough users are found or they are
converted to iflib.

FCP:	https://github.com/freebsd/fcp/blob/master/fcp-0101.md
2018-10-25 04:10:41 +00:00
vmaffione
c41c1dd360 netmap: add man page for the bridge program
Added bridge(8).
Also, minor fixes to the netmap "bridge" application:
 - indentation fixes and code cleanup
 - better usage description
 - better processing of netmap flags

Reviewed by:	0mp
Approved by:	gnn (mentor)
MFC after:	3 days
Differential Revision:	https://reviews.freebsd.org/D17664
2018-10-23 15:34:43 +00:00
emaste
4ceda3f58f arch.7: update final ia64 release to 10.4
No more 10.x releases are planned.
2018-10-23 13:03:24 +00:00
markj
0dd92926d8 Make it possible to disable NUMA support with a tunable.
This provides a chicken switch for anyone negatively impacted by
enabling NUMA in the amd64 GENERIC kernel configuration.  With
NUMA disabled at boot-time, information about the NUMA topology
is not exposed to the rest of the kernel, and all of physical
memory is viewed as coming from a single domain.

This method still has some performance overhead relative to disabling
NUMA support at compile time.

PR:		231460
Reviewed by:	alc, gallatin, kib
MFC after:	1 week
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D17439
2018-10-22 20:13:51 +00:00
emaste
1b485daf81 arch.7: first appeared in FreeBSD 11.1 2018-10-22 18:41:22 +00:00
imp
d44887731c Remove the ncr(4) drive.
This driver has been obsolete since the FreeBSD 4.x. It should have
been removed then since the sym(4) driver had subsumed it. The driver
was commented out of GENERIC in 2000.

RelNotes: Yes
2018-10-22 02:36:18 +00:00
imp
c912dbecce Remove stg(4) driver
stg(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame. It was also only enabled on i386.

Relnote: Yes
2018-10-22 02:35:50 +00:00
imp
2c200a05c0 Remove nsp(4) driver
nsp(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame. It was also only enabled on i386.

Relnote: Yes
2018-10-22 02:35:38 +00:00
imp
bd9eaea6c1 Remove ncv(4) driver
ncv(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame..

Relnote: Yes
2018-10-22 02:35:26 +00:00
imp
a5023bb106 Retire dpt(4)
Marked as gone in 12 and not relevant since the early 90s. No
sightings in nycbug's dmesg database.

Relnotes: yes
2018-10-22 02:35:12 +00:00
imp
3b90b89d12 Remove bt(4) driver
The buslogic scsi driver has been tagged as gone in 12 for some time
now. Remove it. The nycbug dmesg database shows only one sighting in 6
for this driver. It was very popular in the early days of the project,
but that popularity seems to have died by 2004 when the nycbug
database started up.

Relnotes: yes
2018-10-22 02:34:59 +00:00
imp
923d90d94c Remove adv(4) and adw(4)
Remove the advanssy drivers (both adv and adw). They were tagged as
gone in 12 a while qgo. The nycbug dmesg database shows this was last
seen in 6 and there were only a few adv sightings then (none for adw).

Relnotes: yes
2018-10-22 02:34:47 +00:00
imp
d2ba8e57b7 Remove aic(4) driver
aic was marked to be gone in 12 a while ago. Go ahead and remove it.
nycbug's dmesg database shows this was last seen in 6 and one more
time in 4.x. It never was popular, and what popularity it had was over
before the nycbug databse got going in 2004.

Relnotes: yes
2018-10-22 02:34:35 +00:00
imp
9a361720d6 Remove aha(4) from the tree.
We tagged aha as gone in 12 a while ago. Proceed with its removal.
Data from nycbug's database shows the last sighting of this driver in
6, with the prior one in 4.x show its popularity had died prior to
4.x.

Relnotes: yes
2018-10-22 02:34:25 +00:00
imp
e4026c4f30 Remove mse(4) from tree
Remove mse and all support for bus and inport devices from the tree.
Data from nycbug's dmesg database shows the last sighting of this
driver was in 4.10 on only one machine.

Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17628
2018-10-22 02:34:10 +00:00
imp
ba47cdd36c Remove joy(4) driver.
This driver was marked as gone in 12. We're at 13 now. Remove it.
Data from nycbug's dmesg cache shows only one potential user,
suggesting it never was used much.

RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D17629
2018-10-22 02:34:00 +00:00
ae
802ce6d2c8 Add handling for appearing/disappearing of ingress addresses to if_gif(4).
* register handler for ingress address appearing/disappearing;
* add new srcaddr hash table for fast softc lookup by srcaddr;
* when srcaddr disappears, clear IFF_DRV_RUNNING flag from interface,
  and set it otherwise;
* remove the note about ingress address from BUGS section.

MFC after:	1 month
Sponsored by:	Yandex LLC
Differential Revision:	https://reviews.freebsd.org/D17134
2018-10-21 18:06:15 +00:00
vmaffione
fdc923eff7 man: fix vale(4) port naming
The current documentation describing the syntax of a VALE port is wrong.
This patch fixes it to make it consistent.

Approved by:	bcr, gnn (mentor)
Differential Revision:	https://reviews.freebsd.org/D17411
2018-10-21 17:15:09 +00:00
ae
8d3e25d418 Add ifaddr_event_ext event. It is similar to ifaddr_event, but the
handler receives the type of event IFADDR_EVENT_ADD/IFADDR_EVENT_DEL,
and the pointer to ifaddr. Also ifaddr_event now is implemented using
ifaddr_event_ext handler.

MFC after:	3 weeks
Sponsored by:	Yandex LLC
Differential Revision:	https://reviews.freebsd.org/D17100
2018-10-21 15:02:06 +00:00
imp
ae8394a166 Add missing options.
WITHOUT_LOADER_LUA is only needed since we turned it off by default on
powerpc and sparc64 in r338203. Same with
WITHOUT_LOADER_GEIL. WITH_NVME, WITHOUT_NVME, WITH_LOADER_FORCE_LE
have been needed since they were added.
2018-10-21 06:33:35 +00:00
emaste
79568088f3 regen src.conf after r339477 and r339511 2018-10-21 00:32:59 +00:00
cem
9623f41702 ddb: Enable 'thread <address>'
Currently, the 'thread' command (to switch the debugger to another thread)
only accepts decimal-encoded tids.  Use the same parsing logic as 'show
thread <arg>' to accept hex-encoded thread pointers in addition to
decimal-encoded tids.

Document the 'thread' command in ddb.4 and expand the 'show thread'
documentation to cover the tid usage.

Reported by:	bwidawsk
Reviewed by:	bwidawsk (earlier version), kib (earlier version), markj
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D16962
2018-10-20 20:45:49 +00:00
cem
c598d9b4db Add a dev_refthread.9 document.
Reviewed by:	kib
Sponsored by:	Dell EMC Isilon
Differential:	https://reviews.freebsd.org/D16897
2018-10-20 20:41:25 +00:00
markj
8998a23151 Create some global domainsets and refactor NUMA registration.
Pre-defined policies are useful when integrating the domainset(9)
policy machinery into various kernel memory allocators.

The refactoring will make it easier to add NUMA support for other
architectures.

No functional change intended.

Reviewed by:	alc, gallatin, jeff, kib
Tested by:	pho (part of a larger patch)
MFC after:	3 days
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D17416
2018-10-20 17:36:00 +00:00
jtl
7739ba33c8 r334853 added a "socket destructor" callback. However, as implemented, it
was really a "socket close" callback.

Update the socket destructor functionality to run when a socket is
destroyed (rather than when it is closed). The original submitter has
confirmed that this change satisfies the intended use case.

Suggested by:	rwatson
Submitted by:	Michio Honda <micchie at sfc.wide.ad.jp>
Tested by:	Michio Honda <micchie at sfc.wide.ad.jp>
Approved by:	re (kib)
Differential Revision:	https://reviews.freebsd.org/D17590
2018-10-18 14:20:15 +00:00
markj
bb63136b75 Typo.
Submitted by:	Fred Schlechter <freds@vailsys.com>
Approved by:	re (gjb)
MFC after:	3 days
2018-10-15 18:28:34 +00:00