when to use assert, as well as providing a bad example of using
assert. While not strictly necessary, experience has shown issues
with poor assert choice happen often enough that this departure seems
warranted. Also, tighten up the previous example (there's no need
to have extra paragraphs or gratuitously long lines).
Reviewed by: emaste@ (earlier version)
The hardware rate limiting feature is enabled by the RATELIMIT kernel
option. Please refer to ifconfig(8) and the txrtlmt option and the
SO_MAX_PACING_RATE set socket option for more information. This
feature is compatible with hardware transmit send offload, TSO.
A set of sysctl(8) knobs under dev.mce.<N>.rate_limit are provided to
setup the ratelimit table and also to fine tune various rate limit
related parameters.
Sponsored by: Mellanox Technologies
It seems a shame to ruin the patina of the June 4, 1993 date
on abort.3, especially since it still matched the date of
the SCCS ID, but those are the rules.
Reported by: araujo
MFC after: 3 days
Sponsored by: Dell EMC
I didn't know abort2 existed until it was mentioned on a mailing list.
Mention it in related pages so others can find it easily.
MFC after: 3 days
Sponsored by: Dell EMC
- remove "all rights reserved" from my copyright on my extensive
contributions
- belatedly add my name to tuning.7 which I was a large contributor to
several years ago
This commit can also serve as implicit permission for any formatting or
non-substantive changes that FreeBSD wishes to make in the future.
There are risks associated with waiting on a preemptible epoch section.
Change the name to make them not be the default and document the issue
under CAVEATS.
Reported by: markj
storage, CDC ACM (serial), and CDC ECM (ethernet) at the same time.
It's quite similar in function to Linux' "g_multi" gadget.
Reviewed by: hselasky@
MFC after: 2 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
This driver was merged to HEAD one week prior to Exar publicly announcing they
had left the Ethernet market. It is not known to be used and has various code
quality issues spotted by Brooks and Hiren. Retire it in preparation for
FreeBSD 12.0.
Submitted by: kbowling
Reviewed by: brooks imp
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15442
Somehow two copies of the man was in the file, remove one.
Replace an occurence of 'SD/MMC' that was left from copy/paste.
Remove space before ':'
Reported by: 0mp
Each TCP connection that uses the system default cc_newreno(4) congestion
control algorithm module leaks a "struct newreno" (8 bytes of memory) at
connection initialisation time. The NULL-pointer dereference is only germane
when using the ABE feature, which is disabled by default.
While at it:
- Defer the allocation of memory until it is actually needed given that ABE is
optional and disabled by default.
- Document the ENOMEM errno in getsockopt(2)/setsockopt(2).
- Document ENOMEM and ENOBUFS in tcp(4) as being synonymous given that they are
used interchangeably throughout the code.
- Fix a few other nits also accidentally omitted from the original patch.
Reported by: Harsh Jain on freebsd-net@
Tested by: tjh@
Differential Revision: https://reviews.freebsd.org/D15358
This hardware isn't totally ancient, about equal to a mxge(4) or mlx4en(4),
but the company was sold to Exar which then promptly exited the Ethernet
business so the card was commercially available for under 2 years. On deep
search, the only usage of these cards I found was by the importing of the
driver. There are code quality issues identified by Brooks and Hiren and
no visible use nor maintainership that warrant removal from FreeBSD 12.0.
Submitted by: kbowling
Reviewed by: gnn brooks
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15363
- Use Fx when referring to FreeBSD.
- Use Ql instead of Cm for command invocations.
- Remove some redundant Pp macros.
- Use a literal indented Bd instead of a series of Dl macros.
Submitted by: 0mp@
Reviewed by: eadler@
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D15126
Currently when net.inet.carp.allow=0 CARP state remains as MASTER, which is
not very useful (if there are other masters -- it can lead to split brain,
if there are none -- it makes no sense). Having it as INIT makes it clear
that carp packets are disabled.
Submitted by: wg
MFC after: 1 month
Relnotes: yes
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14477
This is a component of a system which lets the kernel dump core to
a remote host after a panic, rather than to a local storage device.
The server component is available in the ports tree. netdump is
particularly useful on diskless systems.
The netdump(4) man page contains some details describing the protocol.
Support for configuring netdump will be added to dumpon(8) in a future
commit. To use netdump, the kernel must have been compiled with the
NETDUMP option.
The initial revision of netdump was written by Darrell Anderson and
was integrated into Sandvine's OS, from which this version was derived.
Reviewed by: bdrewery, cem (earlier versions), julian, sbruno
MFC after: 1 month
X-MFC note: use a spare field in struct ifnet
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D15253
The rsu firmware license check has been disabled since r292756. Changes
rsu(4) since the license ack is no longer required.
While here, add `device rsufw` hint to the kernel configuration lines and
add/update paths to the installed license file in both rsu(4) and rsufw(4).
Submitted by: Mateusz Piotrowski (0mp)
Reviewed by: bcr (manpages)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D14966
Currently 'man -k iflib' would find you the right pages for iflib
documentation, namely iflibdd(9) and iflibdi(9) but 'man iflib' would leave
you in the dark. This allows both approaches to find the relevant
documentation.
Reviewed by: kmacy, shurd
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D15219
Prior to this change the manual page documented ifdi_queues_alloc which has
been replaced by separate methods for tx and rx queues.
Reviewed by: kmacy, shurd
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D15218
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
This driver supports legacy, 32-bit PCI devices, and had an ambiguous
license. Supported devices were already reported to be rare in 2003
(when an earlier version of the driver was removed in r123201).
Reviewed by: rgrimes
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15245
This is a prequisite before we remove the driver from -current.
Reviewed by: emaste kbowling imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D15244
Previously it was possible to connect a socket (which had the
CAP_CONNECT right) by calling "connectat(AT_FDCWD, ...)" even in
capabilties mode. This combination should be treated the same as a call
to connect (i.e. forbidden in capabilities mode). Similarly for bindat.
Disable connectat/bindat with AT_FDCWD in capabilities mode, fix up the
documentation and add tests.
PR: 222632
Submitted by: Jan Kokemüller <jan.kokemueller@gmail.com>
Reviewed by: Domagoj Stolfa
MFC after: 1 week
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D15221
Add a driver that match on 'rockchip,gpio-bank', this compatible
string is found on almost all RockChip SoC so this driver is compatible
with almost all of the RockChip SoCs.
The only features missing for this driver are :
- Interrupts support
- Debouncing
Add pinctrl driver for RockChip SoCs. This device manage which function
to set on which pin and some other properties like pull up/down, drive
strength etc ...
For now the driver only support RK3328 but it is versatile enough to
add support for other RockChip SoC in the future.
RockChip GRF (General Register Files) is present on almost all RockChip
SoC and is used to control some area of the system like iomuxing, gpio
or usb phy.
We need it to be probed and attached early in the boot process so
subclass syscon_generic and set the pass to BUS_PASS_BUS + BUS_PASS_ORDER_MIDDLE.
- Microsemi SCSI driver for PQI controllers.
- Found on newer model HP servers.
- Restrict to AMD64 only as per developer request.
The driver provides support for the new generation of PQI controllers
from Microsemi. This driver is the first SCSI driver to implement the PQI
queuing model and it will replace the aacraid driver for Adaptec Series 9
controllers. HARDWARE Controllers supported by the driver include:
HPE Gen10 Smart Array Controller Family
OEM Controllers based on the Microsemi Chipset.
Submitted by: deepak.ukey@microsemi.com
Relnotes: yes
Sponsored by: Microsemi
Differential Revision: https://reviews.freebsd.org/D14514
> Description of fields to fill in above: 76 columns --|
> PR: If and which Problem Report is related.
> Submitted by: If someone else sent in the change.
> Reported by: If someone else reported the issue.
> Reviewed by: If someone else reviewed your modification.
> Approved by: If you needed approval for this commit.
> Obtained from: If the change is from a third party.
> MFC after: N [day[s]|week[s]|month[s]]. Request a reminder email.
> MFH: Ports tree branch name. Request approval for merge.
> Relnotes: Set to 'yes' for mention in release notes.
> Security: Vulnerability reference (one per line) or description.
> Sponsored by: If the change was sponsored by an organization.
> Pull Request: https://github.com/freebsd/freebsd/pull/### (*full* GitHub URL needed).
> Differential Revision: https://reviews.freebsd.org/D### (*full* phabric URL needed).
> Empty fields above will be automatically removed.
M share/man/man4/Makefile
AM share/man/man4/smartpqi.4
M sys/amd64/conf/GENERIC
M sys/conf/NOTES
M sys/conf/files.amd64
A sys/dev/smartpqi
AM sys/dev/smartpqi/smartpqi_cam.c
AM sys/dev/smartpqi/smartpqi_cmd.c
AM sys/dev/smartpqi/smartpqi_defines.h
AM sys/dev/smartpqi/smartpqi_discovery.c
AM sys/dev/smartpqi/smartpqi_event.c
AM sys/dev/smartpqi/smartpqi_helper.c
AM sys/dev/smartpqi/smartpqi_includes.h
AM sys/dev/smartpqi/smartpqi_init.c
AM sys/dev/smartpqi/smartpqi_intr.c
AM sys/dev/smartpqi/smartpqi_ioctl.c
AM sys/dev/smartpqi/smartpqi_ioctl.h
AM sys/dev/smartpqi/smartpqi_main.c
AM sys/dev/smartpqi/smartpqi_mem.c
AM sys/dev/smartpqi/smartpqi_misc.c
AM sys/dev/smartpqi/smartpqi_prototypes.h
AM sys/dev/smartpqi/smartpqi_queue.c
AM sys/dev/smartpqi/smartpqi_request.c
AM sys/dev/smartpqi/smartpqi_response.c
AM sys/dev/smartpqi/smartpqi_sis.c
AM sys/dev/smartpqi/smartpqi_structures.h
AM sys/dev/smartpqi/smartpqi_tag.c
M sys/modules/Makefile
A sys/modules/smartpqi
AM sys/modules/smartpqi/Makefile
device-side (and only device-side) "virtual USB serial adapters" - the
ones you can get with an OTG-capable board - as consoles. It boils down
to adding the device name to kern.console sysctl, although doing that
requires jumping through some hoops. It doesn't change the actual
operation of those virtual devices. The point is to make it possible
for init(8) to recognize them as console devices and to launch getty(8)
for them, when configured as "onifconsole" in ttys(5). The point of
that, in turn, is to add such entries to the default ttys(5), so that
init(8) will launch gettys for device-side "virtual serial adapters",
but not for actual USB serial dongles.
Reviewed by: hselasky@
No objections: imp@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
We intend to remove support before FreeBSD 12 is branched. These are
available only as 32-bit PCI devices. The driver has an ambiguous
license and I have not been successful in contacting the driver's author
in order to address this.
The planned deprecation has been announced on -current and -stable; if
we receive feedback that the driver is still useful and we are able to
resolve the license issue this deprecation notice can be reverted.
Reviewed by: bapt, brooks, imp, rgrimes
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15182
Half of implementations always failed (returned (-1)) and they were
previously used in only one place.
Reviewed by: kib, andrew
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15102
Also remove the commented out documentation. The documentation arrived
with the import of the copy.9 manpage. I suspect the implementations
came from NetBSD while bootstrapping the Arm and MIPS ports.
Reviewed by: andrew, jmallett
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15108
While Arcnet has some continued deployment in industrial controls, the
lack of drivers for any of the PCI, USB, or PCIe NICs on the market
suggests such users aren't running FreeBSD.
Evidence in the PR database suggests that the cm(4) driver (our sole
Arcnet NIC) was broken in 5.0 and has not worked since.
PR: 182297
Reviewed by: jhibbits, vangyzen
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15057
Defines in net/if_media.h remain in case code copied from ifconfig is in
use elsewere (supporting non-existant media type is harmless).
Reviewed by: kib, jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15017
It's had a good life, but it's not really configurable and not really used.
Obtained from: opBSD (with some changes)
Differential Revision: https://reviews.freebsd.org/D14991
and VMware legal:
- Add a dual BSD-2 Clause/GPLv2 LICENSE file in the VMCI directory
- Remove the use of "All Rights Reserved"
- Per best practice, remove copyright/license info from Makefile
Reviewed by: imp, emaste, jhb, Vishnu Dasa <vdasa@vmware.com>
Approved by: VMware legal via Mark Peek <markpeek@vmware.com>
Differential Revision: https://reviews.freebsd.org/D14979
We intend to remove support before FreeBSD 12 is branched.
Reviewed by: imp, emaste
MFC after: 3 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14890
The ocs_fc(4) driver supports the following hardware:
Emulex 16/8G FC GEN 5 HBAS
LPe15004 FC Host Bus Adapters
LPe160XX FC Host Bus Adapters
Emulex 32/16G FC GEN 6 HBAS
LPe3100X FC Host Bus Adapters
LPe3200X FC Host Bus Adapters
The driver supports target and initiator mode, and also supports FC-Tape.
Note that the driver only currently works on little endian platforms. It
is only included in the module build for amd64 and i386, and in GENERIC
on amd64 only.
Submitted by: Ram Kishore Vegesna <ram.vegesna@broadcom.com>
Reviewed by: mav
MFC after: 5 days
Relnotes: yes
Sponsored by: Broadcom
Differential Revision: https://reviews.freebsd.org/D11423
Add a new "interleave" allocation policy which stripes pages across
domains with a stride or width keeping contiguity within a multi-page
region.
Move the kernel to the dedicated numbered cpuset #2 making it possible
to assign kernel threads and memory policy separately from user. This
also eliminates the need for the complicated interrupt binding code.
Add a sysctl API for viewing and manipulating domainsets. Refactor some
of the cpuset_t manipulation code using the generic bitset type so that
it can be used for both. This probably belongs in a dedicated subr file.
Attempt to improve the include situation.
Reviewed by: kib
Discussed with: jhb (cpuset parts)
Tested by: pho (before review feedback)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14839
For some reason, the other link - https://lists.FreeBSD.org/ - needs
the trailing slash, otherwise man(8) renders it in a weird way. No
idea why's that. At least try to be consistent. Revert it when the
other link gets fixed.
MFC after: 2 weeks
In a virtual machine, VMCI is exposed as a regular PCI device. The primary
communication mechanisms supported are a point-to-point bidirectional
transport based on a pair of memory-mapped queues, and asynchronous
notifications in the form of datagrams and doorbells. These features are
available to kernel level components such as vSockets through the VMCI
kernel API. In addition to this, the VMCI kernel API provides support for
receiving events related to the state of the VMCI communication channels,
and the virtual machine itself.
Submitted by: Vishnu Dasa <vdasa@vmware.com>
Reviewed by: bcr, imp
Obtained from: VMware
Differential Revision: https://reviews.freebsd.org/D14289
Forwarded packets passed through PFIL_OUT, which made it difficult for
firewalls to figure out if they were forwarding or producing packets. This in
turn is an issue for pf for IPv6 fragment handling: it needs to call
ip6_output() or ip6_forward() to handle the fragments. Figuring out which was
difficult (and until now, incorrect).
Having pfil distinguish the two removes an ugly piece of code from pf.
Introduce a new variant of the netpfil callbacks with a flags variable, which
has PFIL_FWD set for forwarded packets. This allows pf to reliably work out if
a packet is forwarded.
Reviewed by: ae, kevans
Differential Revision: https://reviews.freebsd.org/D13715
from jailed process. These might get implemented in jails in the
future, but for now they are not supported.
Discussed on: freebsd-security@
Reviewed by: brueffer@
MFC after: 2 weeks
altq(4) to match altq(9). This makes preserving the history section as the
author of ALTQ easier in the history section, rather than calling it a framework
in the description & a system in the history.
Add a history section to altq(4) and extend the history section in altq(9)
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D14774
ECN (ABE)" proposal to the New Reno congestion control algorithm module.
ABE reduces the amount of congestion window reduction in response to
ECN-signalled congestion relative to the loss-inferred congestion response.
More details about ABE can be found in the Internet-Draft:
https://tools.ietf.org/html/draft-ietf-tcpm-alternativebackoff-ecn
The implementation introduces four new sysctls:
- net.inet.tcp.cc.abe defaults to 0 (disabled) and can be set to non-zero to
enable ABE for ECN-enabled TCP connections.
- net.inet.tcp.cc.newreno.beta and net.inet.tcp.cc.newreno.beta_ecn set the
multiplicative window decrease factor, specified as a percentage, applied to
the congestion window in response to a loss-based or ECN-based congestion
signal respectively. They default to the values specified in the draft i.e.
beta=50 and beta_ecn=80.
- net.inet.tcp.cc.abe_frlossreduce defaults to 0 (disabled) and can be set to
non-zero to enable the use of standard beta (50% by default) when repairing
loss during an ECN-signalled congestion recovery episode. It enables a more
conservative congestion response and is provided for the purposes of
experimentation as a result of some discussion at IETF 100 in Singapore.
The values of beta and beta_ecn can also be set per-connection by way of the
TCP_CCALGOOPT TCP-level socket option and the new CC_NEWRENO_BETA or
CC_NEWRENO_BETA_ECN CC algo sub-options.
Submitted by: Tom Jones <tj@enoti.me>
Tested by: Tom Jones <tj@enoti.me>, Grenville Armitage <garmitage@swin.edu.au>
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D11616
no longer relevant (read: most of what was there) and adds some
quick links to point newcomers in the right direction.
Reviewed by: imp@
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14680
Or else disable the device. Note that the detection can be bypassed by
setting the hw.atrtc.enable option in the loader configuration file.
More information can be found on atrtc(4).
Sponsored by: Citrix Systems R&D
Reviewed by: ian
Differential revision: https://reviews.freebsd.org/D14399
Remove how to format K&R stuff. The project hasn't been using it in
new code for a long time. It's so obsolete, we don't need a statement
to never use it. Add a statement requesting that comments about
parameters be preserved when converting to ASNI style, per Kirk.
Differential Revision: https://reviews.freebsd.org/D14051
ConnectX-4/5 devices in mlx5core.
The dump is obtained by reading a predefined register map from the
non-destructive crspace, accessible by the vendor-specific PCIe
capability (VSC). The dump is stored in preallocated kernel memory and
managed by the mlx5tool(8), which communicates with the driver using a
character device node.
The utility allows to store the dump in format
<address> <value>
into a file, to reset the dump content, and to manually initiate the
dump.
A call to mlx5_fwdump() should be added at the places where a dump
must be fetched automatically. The most likely place is right before a
firmware reset request.
Submitted by: kib@
MFC after: 1 week
Sponsored by: Mellanox Technologies
According with /etc/rc.initdiskless the default mfs allocation
is now 5Mb (10240 x 512 bytes sectors)
Submitted by: rodrigo
Reviewed by: bcr
Approved by: manpages (bcr)
Differential Revision: https://reviews.freebsd.org/D14592
- Add fdt_pinctrl(4) with general information for the driver
- Add fdt_pinctrl(9) with fdt_pinctrl KPI description
Reviewed by: ian, manu, wblock
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14235
imcsmb(4) provides smbus(4) support for the SMBus controller functionality
in the integrated Memory Controllers (iMCs) embedded in Intel Sandybridge-
Xeon, Ivybridge-Xeon, Haswell-Xeon, and Broadwell-Xeon CPUs. Each CPU
implements one or more iMCs, depending on the number of cores; each iMC
implements two SMBus controllers (iMC-SMBs).
*** IMPORTANT NOTE ***
Because motherboard firmware or the BMC might try to use the iMC-SMBs for
monitoring DIMM temperatures and/or managing an NVDIMM, the driver might
need to temporarily disable those functions, or take a hardware interlock,
before using the iMC-SMBs. Details on how to do this may vary from board to
board, and the procedure may be proprietary. It is strongly suggested that
anyone wishing to use this driver contact their motherboard vendor, and
modify the driver as described in the manual page and in the driver itself.
(For what it's worth, the driver as-is has been tested on various SuperMicro
motherboards.)
Reviewed by: avg, jhb
MFC after: 1 week
Relnotes: yes
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14447
Discussed with: avg, ian, jhb
Tested by: allanjude (previous version), Panasas
camelCase tends to be preferred for function identifiers, while
internal_underscores are preferred for variable identifiers. This convention
makes it a little bit easier to eyeball whether variable/function usage is
correct.
The optional commas for final table values are preferred to reduce chances
for error.
A super-set of the functionality of jedec_ts(4). jedec_dimm(4) reports asset
information (Part Number, Serial Number) encoded in the "Serial Presence
Detect" (SPD) data on JEDEC DDR3 and DDR4 DIMMs. It also calculates and
reports the memory capacity of the DIMM, in megabytes. If the DIMM includes
a "Thermal Sensor On DIMM" (TSOD), the temperature is also reported.
Reviewed by: cem
MFC after: 1 week
Relnotes: yes
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14392
Discussed with: avg, cem
Tested by: avg, cem (previous version, no semantic changes)
Add chvgpio(4) driver for Intel Z8xxx SoC family. This product
was formerly known as Cherry Trail but Linux and OpenBSD drivers
refer to it as Cherry View. This driver is derived from OpenBSD
one so the name is kept for alignment with another BSD system.
Submitted by: Tom Jones <tj@enoti.me>
Reviewed by: gonzo, wblock(man page)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13086
The intent of this guideline is to avoid creating global variables in module
scope. Its main purpose is to serve as a reminder that variables at module
scope also need to be declared.
We want to avoid global variables in general, but this is easier to mess up
when designing things in the module scope.
VirtIO V1 provides configuration in multiple VENDOR capabilities so this
allows all of the configuration to be discovered.
Reviewed by: jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14325
This covers the lua style guidelines we've generally agreed on so far. It
will be revised as work continues and we run into more scenarios that need
specified.
Discussed with: cem, jilles
Differential Revision: https://reviews.freebsd.org/D14423
A few ISP filter PADI requests based on such tag,
to force the use of their own routers.
The custom Host-Uniq tag is passed in the NGM_PPPOE_CONNECT
control message, so it can be used with FreeBSD ppp(8)
and mpd without any other change.
Add support to send and receive PADM messages,
HURL and MOTM, often used by service providers to provide
ACS information and other configuration settings
to the user CPE.
Submitted by: ale
Approved by: mav (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D9270
This works similarly to the existing gzip compression support, but
zstd is typically faster and gives better compression ratios.
Support for this functionality must be configured by adding ZSTDIO to
one's kernel configuration file. dumpon(8)'s new -Z option is used to
configure zstd compression for kernel dumps. savecore(8) now recognizes
and saves zstd-compressed kernel dumps with a .zst extension.
Submitted by: cem (original version)
Relnotes: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13101,
https://reviews.freebsd.org/D13633
Using args[2]->tcps_state as-documented results in error:
operator -> cannot be applied to pointer to type "void"
This error is accurate as the synopsis for tcp:::state-change is:
tcp:::state-change(void *, csinfo_t *, void *, tcpsinfo_t *, void *,
tcplsinfo_t *);
args[2] refers to the third argument which is always NULL (as-
documented). The to-state for the TCP connection state transition is
actually in the fourth argument, args[3]->tcps_state.
- Remove the shim interface that allowed bwn(4) to use either siba_bwn or
bhnd(4), replacing all siba_bwn calls with their bhnd(4) bus equivalents.
- Drop the legay, now-unused siba_bwn bus driver.
- Clean up bhnd(4) board flag defines referenced by bwn(4).
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13518
Our standard boot method for arm64 is via UEFI, so install the man page
that describes the boot process.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
FreeBSD and industry has been inconsistent in the use of UEFI and EFI.
They are essentially just different versions of the same specification
and are often used interchangeably. Make it easier for users to find
information by making efi(8) an alias for uefi(8).
Reported by: imp, jhb
- EFI support appeared in 5.0 for ia64
- arm64 UEFI support added in 11.0
The AUTHORS section included the folks responsible for the bulk of the
work to bring UEFI support to amd64, but missed those who did the
original work on ia64, the initial port to i386, the ports to arm64 and
arm, and have generally maintained and improved general UEFI support
since then. It's unwieldly to include everyone and would quickly become
outdated again anyhow, so just remove the AUTHORS section.
Reviewed by: manu
Discussed with: jhb
Differential Revision: https://reviews.freebsd.org/D14033
possible to change string and numeric vendor and product identifiers,
as well as anything else there might be to change for a particular
device side template, eg the MAC address.
Reviewed by: hselasky@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13920
This matches directory structure used commonly in Linux-land, and it's
cleaner than mixing overlays into the existing module paths. Overlays are
still mixed in by specifying fdt_overlays in loader.conf(5).
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D13922
r314467 introduced hw.usb.wsp.enable_single_tap_clicks to enable/disable
single-tap left click behavior. Update the man page to reflect the new
sysctl.
PR: 196624
MFC after: 3 days
X-MFC-With: r314467
Attaching syscon_generic earlier than BUS_PASS_DEFAULT makes it more
difficult for specific syscon drivers to attach to the syscon node and to
get ordering right. Further discussion yielded the following set of
decisions:
- Move syscon_generic to BUS_PASS_DEFAULT
- If a platform needs a syscon with different attach order or probe
behavior, it should subclass syscon_generic and match on the SoC specific
compat string
- When we come across a need for a syscon that attaches earlier but only
specifies compatible = "syscon", we should create a syscon_exclusive driver
that provides generic access but probes earlier and only matches if "syscon"
is the only compatible. Such fdt nodes do exist in the wild right now, but
we don't really use them at the moment.
Additionally:
- Any syscon provider that has needs any more complex than a spinlock solely
for syscon access and a single memory resource should subclass syscon
directly rather than attempting to subclass syscon_generic or add complexity
to it. syscon_generic's attach/detach methods may be made public should the
need arise to subclass it with additional attach/detach behavior.
We introduce aw_syscon(4) that just subclasses syscon_generic but probes
earlier to meet our requirements for if_awg and implements #2 above for this
specific situation. It currently only matches a64/a83t/h3 since these are
the only platforms that really need it at the time being.
Discussed with: ian
Reviewed by: manu, andrew, bcr (manpages, content unchanged since review)
Differential Revision: https://reviews.freebsd.org/D13793
There's a report of some regression in ports. Revert for now for an
exp run for this change in isolation (previous lld exp run also included
switching the linker used for ports to lld).
Also revert the src.conf.5 regeneration in r327824.
Reported by: antoine
Sponsored by: The FreeBSD Foundation
Additionally, move the overflow check logic out to WOULD_OVERFLOW() for
consumers to have a common means of testing for overflowing allocations.
WOULD_OVERFLOW() should be a secondary check -- on 64-bit platforms, just
because an allocation won't overflow size_t does not mean it is a sane size
to request. Callers should be imposing reasonable allocation limits far,
far, below overflow.
Discussed with: emaste, jhb, kp
Sponsored by: Dell EMC Isilon
(I missed the Reviewed by and review link from r327783.)
Reviewed by: brooks, dim, bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13827
We currently use a set of subroutines in kern_gzio.c to perform
compression of user and kernel core dumps. In the interest of adding
support for other compression algorithms (zstd) in this role without
complicating the API consumers, add a simple compressor API which can be
used to select an algorithm.
Also change the (non-default) GZIO kernel option to not enable
compressed user cores by default. It's not clear that such a default
would be desirable with support for multiple algorithms implemented,
and it's inconsistent in that it isn't applied to kernel dumps.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D13632
Similar to calloc() the mallocarray() function checks for integer
overflows before allocating memory.
It does not zero memory, unless the M_ZERO flag is set.
Reviewed by: pfg, vangyzen (previous version), imp (previous version)
Obtained from: OpenBSD
Differential Revision: https://reviews.freebsd.org/D13766
The sid controller on the H3 is generally identical in location, size, and
efuse offset to the a64 and the a83t. The main difference is that the H3 has
a silicon bug that sometimes causes the rootkey (at least) to be garbled
unless first read by the prctl registers.
This device is currently not in our DTS and, as of now, is not yet present
in mainline Linux DTS.
Tested on: OrangePi One
Enable the hardclock-based watchdog previously conditional on the
SW_WATCHDOG option whenever hardware watchdogs are not found, and
watchdogd attempts to enable the watchdog. The SW_WATCHDOG option
still causes the sofware watchdog to be enabled even if there is a
hardware watchdog. This does not change the other software-based
watchdog enabled by the --softtimeout option to watchdogd.
Note that the code to reprime the watchdog during kernel core dumps is
no longer conditional on SW_WATCHDOG. I think this was previously a bug.
Reviewed by: imp alfred bjk
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D13713
This copies changes from NetBSD into FreeBSD's man page. I compared the
proposed changes against FreeBSD headers and modified them to match.
PR: 214602
Submitted by: fehmi noyan isi <fnoyanisi@yahoo.com>
Introduce new set of loader tunables kern.vt.color.N.rgb, where N is a
number from 0 to 15. The value is either comma-separated list decimal
numbers ranging from 0 to 255 that represent values of red, green, and
blue components respectively (i.e. "128,128,128") or 6-digit hex triplet
commonly used to represent colors in HTML or xterm settings (i.e. #808080)
Each tunable overrides one of the 16 hardcoded palette codes and can be set
in loader.conf(5)
Reviewed by: bcr(docs), jilles, manu, ray
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13645
A comment in Makefile.inc1 has long stated that LOCAL_DIRS are built last,
after the base system. Incremental improvements in parallel building over
the years have led to LOCAL_DIRS being built in parallel with base system
directories. This change allows the .WAIT directive to appear in LOCAL_DIRS
and LOCAL_LIB_DIRS lists to give the user some control over parallel
building of local additions.
Differential Revision: https://reviews.freebsd.org/D13622
filesystem larger than about 50-55 MiB.
The description of VM_KMEM_SIZE_SCALE is roughly as hand-wavy as my
understanding of the option, but at least mentioning that it's a factor
and giving an empirical datapoint that works will give folks some idea
of what to tweak if they have problems.
MD_READONLY flag for the md device automatically instantiated during
kernel init for an mdroot filesystem.
Note that there is specifically and by design no tunable or sysctl
control over this feature. Without this option, you already have control
over whether the mdroot fs is writeable using vfs.root.mountfrom.options
from loader(8), the root_rw_mount rcvar, and by using "mount -u[rw] /"
or equivelent on the fly. This option is being added to provide a way
to make the mdroot fs truly immutable before userland code begins running.
Differential Revision: https://reviews.freebsd.org/D13411
Email address has changed, uses consistent name (Matthew, not Matt)
Reported by: Matthew Macy <mmacy@mattmacy.io>
Differential Revision: https://reviews.freebsd.org/D13537
Add atomic_load_<type> and atomic_store_<type>, and explain why they
exist.
Define the synchronizes-with relationship and its effects.
Reorder and revise some of the existing text. For example, more
precisely describe when ordinary accesses are atomic.
Reviewed by: jhb, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13522
the expected default board_vendor value on MIPS SoCs.
This is required by bwn(4) to differentiate between single-band and
dual-band device variants that otherwise share a common chip ID.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
rc.conf(5) documents the gifconfig_<interface> keyword, which is
no longer implemented. Document the replacement, which works with
cloned_interfaces as well.
Reviewed by: dab
Group Reviwers: manpages
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D13130
This change adds an implementation of a sysent for running CloudABI
armv6 and armv7 binaries on FreeBSD/arm64. It is a somewhat literal copy
of the armv6 version, except that it's been patched up to use the proper
registers.
Just like for cloudabi32.ko on FreeBSD/amd64, we make use of a vDSO that
automatically pads system call parameters to 64-bit value. These are
stored in a buffer on the stack, meaning we need to use copyin() and
copyout() unconditionally.
type to any value. This can cause page faults and panics due to accessing
uninitialized fields in the "struct ifnet" which are specific to the network
device type.
MFC after: 1 week
Found by: jau@iki.fi
PR: 223767
Sponsored by: Mellanox Technologies
EMBEDDEDPORTS. [1]
Remove and update stale documentation from release(7) while here.
PR: 206344 [1]
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Add missing support for specifying I/O control flags during core reset,
and resolve a number of siba(4)-specific reset issues:
- Add missing check for target reject flags in siba_is_hw_suspended().
- Remove incorrect wait on SIBA_TMH_BUSY when modifying any target state
register; this should only be done when waiting for initiated
transactions to clear.
- Add missing wait on SIBA_IM_BY when asserting SIBA_IM_RJ.
- Overwrite any previously set SIBA_TML_REJ flag when bringing the core
out of reset. This fixes a lockup that occured when we brought up a core
(after reboot) that had previously been placed into RESET by siba_bwn(4).
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13039
This includes a number of copyedits for the inline code documentation
comments, updates to the existing bhnd(4), bhndb(4), bcma(4), and siba(4)
man pages, and new man pages for bhnd_chipc(4), bhnd_pmu(4), bhndb_pci(4),
bhnd(9), and bhnd_erom(9).
Approved by: adrian (mentor)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13021
The old description has been inaccurate since at least 243271, if not
before.
Submitted by: will
Reviewed by: kib
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D13108
xlint is currently a fossil. We have much more useful and alive tools
to do now what xlint did twenty years ago.
I did not cleared some stuff which makes lint operational, in
sys/x86/include and sys/sys, but I might do it as followup. The
x86/include/ucontext.h and _types.h hacks made to please lint was the
main reason for my initial proposal to classify xlint as obsolete and
to remove it.
Also I do not intend to clear sccs ids.
Reviewed by: bapt, brooks, emaste, jhb, pfg
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D13015
