Fix some wrong usages.
Note: this does not affect generated binaries as this argument is not used.
PR: 137213
Submitted by: Eygene Ryabinkin (initial version)
MFC after: 1 month
items rather than a single one. The list is a space separated collection
of items defined as the current one accepted.
While there fix also a nit in a comment.
Obtained from: Sandvine Incorporated
Reviewed by: emaste
Tested by: Giovanni Trematerra
<giovanni dot trematerra at gmail dot com>
Sponsored by: Sandvine Incorporated
MFC: 2 weeks
- Don't grab the filedesc lock just to read fd_cmask.
- Drop vnode locks earlier when mounting the root filesystem and before
sanitizing stdin/out/err file descriptors during execve().
Submitted by: kib
Approved by: re (rwatson)
MFC after: 1 week
provide specific macros, AUDIT_ARG_UPATH1() and AUDIT_ARG_UPATH2()
to capture path information for audit records. This allows us to
move the definitions of ARG_* out of the public audit header file,
as they are an implementation detail of our current kernel-internal
audit record, which may change.
Approved by: re (kensmith)
Obtained from: TrustedBSD Project
MFC after: 1 month
rather than as paths, which would lead to them being treated as relative
pathnames and hence confusingly converted into absolute pathnames.
Capture flags to unmount(2) via an argument token.
Approved by: re (audit argument blanket)
MFC after: 3 days
specific macros for each audit argument type. This makes it easier to
follow call-graphs, especially for automated analysis tools (such as
fxr).
In MFC, we should leave the existing AUDIT_ARG() macros as they may be
used by third-party kernel modules.
Suggested by: brooks
Approved by: re (kib)
Obtained from: TrustedBSD Project
MFC after: 1 week
and used in a large number of files, but also because an increasing number
of incorrect uses of MAC calls were sneaking in due to copy-and-paste of
MAC-aware code without the associated opt_mac.h include.
Discussed with: pjd
=================
Extend the loader to parse the root file system mount options in /etc/fstab,
and set a new loader variable vfs.root.mountfrom.options with these options.
The root mount options must be a comma-delimited string, as specified in
/etc/fstab.
Only set the vfs.root.mountfrom.options variable if it has not been
set in the environment.
sys/kern/vfs_mount.c
====================
When mounting the root file system, pass the mount options
specified in vfs.root.mountfrom.options, but filter out "rw" and "noro",
since the initial mount of the root file system must be done as "ro".
While we are here, try to add a few hints to the mountroot prompt
to give users and idea what might of gone wrong during mounting
of the root file system.
Reviewed by: jhb (an earlier patch)
by creating a child jail, which is visible to that jail and to any
parent jails. Child jails may be restricted more than their parents,
but never less. Jail names reflect this hierarchy, being MIB-style
dot-separated strings.
Every thread now points to a jail, the default being prison0, which
contains information about the physical system. Prison0's root
directory is the same as rootvnode; its hostname is the same as the
global hostname, and its securelevel replaces the global securelevel.
Note that the variable "securelevel" has actually gone away, which
should not cause any problems for code that properly uses
securelevel_gt() and securelevel_ge().
Some jail-related permissions that were kept in global variables and
set via sysctls are now per-jail settings. The sysctls still exist for
backward compatibility, used only by the now-deprecated jail(2) system
call.
Approved by: bz (mentor)
the VFS. Now all the VFS_* functions and relating parts don't want the
context as long as it always refers to curthread.
In some points, in particular when dealing with VOPs and functions living
in the same namespace (eg. vflush) which still need to be converted,
pass curthread explicitly in order to retain the old behaviour.
Such loose ends will be fixed ASAP.
While here fix a bug: now, UFS_EXTATTR can be compiled alone without the
UFS_EXTATTR_AUTOSTART option.
VFS KPI is heavilly changed by this commit so thirdy parts modules needs
to be recompiled. Bump __FreeBSD_version in order to signal such
situation.
vfsopt and the vfs_buildopts function public, and add some new fields
to struct vfsopt (pos and seen), and new functions vfs_getopt_pos and
vfs_opterror.
Further extend the interface to allow reading options from the kernel
in addition to sending them to the kernel, with vfs_setopt and related
functions.
While this allows the "name=value" option interface to be used for more
than just FS mounts (planned use is for jails), it retains the current
"vfsopt" name and <sys/mount.h> requirement.
Approved by: bz (mentor)
- threadA runs vfs_rel(mp1)
- threadB does unmount the mp1 fs, sets MNTK_UNMOUNT and drop MNT_ILOCK()
- threadA runs vfs_busy(mp1) and, as long as, MNTK_UNMOUNT is set, sleeps
waiting for threadB to complete the unmount
- threadB, in vfs_mount_destroy(), finds mnt_lock > 0 and sleeps waiting
for the refcount to expire.
Fix the deadlock by adding a flag called MNTK_REFEXPIRE which signals the
unmounter is waiting for mnt_ref to expire.
The vfs_busy contenders got awake, fails, and if they retry the
MNTK_REFEXPIRE won't allow them to sleep again.
2) Simplify significantly the code of vfs_mount_destroy() trimming
unnecessary codes:
- as long as any reference exited, it is no-more possible to have
write-op (primarty and secondary) in progress.
- it is no needed to drop and reacquire the mount lock.
- filling the structures with dummy values is unuseful as long as
it is going to be freed.
Tested by: pho, Andrea Barberio <insomniac at slackware dot it>
Discussed with: kib
Really, the concept of holdcnt in the struct mount is rappresented by
the mnt_ref (which prevents the type-stable structure from being
"recycled) handled through vfs_ref() and vfs_rel().
On this optic, switch the holdcnt acquisition into an emulated vfs_ref()
(and subsequent release into vfs_rel()).
Discussed with: kib
Tested by: pho
and server. This replaces the RPC implementation of the NFS client and
server with the newer RPC implementation originally developed
(actually ported from the userland sunrpc code) to support the NFS
Lock Manager. I have tested this code extensively and I believe it is
stable and that performance is at least equal to the legacy RPC
implementation.
The NFS code currently contains support for both the new RPC
implementation and the older legacy implementation inherited from the
original NFS codebase. The default is to use the new implementation -
add the NFS_LEGACYRPC option to fall back to the old code. When I
merge this support back to RELENG_7, I will probably change this so
that users have to 'opt in' to get the new code.
To use RPCSEC_GSS on either client or server, you must build a kernel
which includes the KGSSAPI option and the crypto device. On the
userland side, you must build at least a new libc, mountd, mount_nfs
and gssd. You must install new versions of /etc/rc.d/gssd and
/etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf.
As long as gssd is running, you should be able to mount an NFS
filesystem from a server that requires RPCSEC_GSS authentication. The
mount itself can happen without any kerberos credentials but all
access to the filesystem will be denied unless the accessing user has
a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There
is currently no support for situations where the ticket file is in a
different place, such as when the user logged in via SSH and has
delegated credentials from that login. This restriction is also
present in Solaris and Linux. In theory, we could improve this in
future, possibly using Brooks Davis' implementation of variant
symlinks.
Supporting RPCSEC_GSS on a server is nearly as simple. You must create
service creds for the server in the form 'nfs/<fqdn>@<REALM>' and
install them in /etc/krb5.keytab. The standard heimdal utility ktutil
makes this fairly easy. After the service creds have been created, you
can add a '-sec=krb5' option to /etc/exports and restart both mountd
and nfsd.
The only other difference an administrator should notice is that nfsd
doesn't fork to create service threads any more. In normal operation,
there will be two nfsd processes, one in userland waiting for TCP
connections and one in the kernel handling requests. The latter
process will create as many kthreads as required - these should be
visible via 'top -H'. The code has some support for varying the number
of service threads according to load but initially at least, nfsd uses
a fixed number of threads according to the value supplied to its '-n'
option.
Sponsored by: Isilon Systems
MFC after: 1 month
- Implement real draining for vfs consumers by not relying on the
mnt_lock and using instead a refcount in order to keep track of lock
requesters.
- Due to the change above, remove the mnt_lock lockmgr because it is now
useless.
- Due to the change above, vfs_busy() is no more linked to a lockmgr.
Change so its KPI by removing the interlock argument and defining 2 new
flags for it: MBF_NOWAIT which basically replaces the LK_NOWAIT of the
old version (which was unlinked from the lockmgr alredy) and
MBF_MNTLSTLOCK which provides the ability to drop the mountlist_mtx
once the mnt interlock is held (ability still desired by most consumers).
- The stub used into vfs_mount_destroy(), that allows to override the
mnt_ref if running for more than 3 seconds, make it totally useless.
Remove it as it was thought to work into older versions.
If a problem of "refcount held never going away" should appear, we will
need to fix properly instead than trust on such hackish solution.
- Fix a bug where returning (with an error) from dounmount() was still
leaving the MNTK_MWAIT flag on even if it the waiters were actually
woken up. Just a place in vfs_mount_destroy() is left because it is
going to recycle the structure in any case, so it doesn't matter.
- Remove the markercnt refcount as it is useless.
This patch modifies VFS ABI and breaks KPI for vfs_busy() so manpages and
__FreeBSD_version will be modified accordingly.
Discussed with: kib
Tested by: pho
In particular following functions KPI results modified:
- bufobj_invalbuf()
- bufsync()
and BO_SYNC() "virtual method" of the buffer objects set.
Main consumers of bufobj functions are affected by this change too and,
in particular, functions which changed their KPI are:
- vinvalbuf()
- g_vfs_close()
Due to the KPI breakage, __FreeBSD_version will be bumped in a later
commit.
As a side note, please consider just temporary the 'curthread' argument
passing to VOP_SYNC() (in bufsync()) as it will be axed out ASAP
Reviewed by: kib
Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
set the MNT_FORCE flag, but do not persist "force"
in the options list, since it is a command, not a persistent property
of a mount.
Similarly, when we see "reload", set MNT_RELOAD,
but delete "reload" from the options list.
MFC after: 1 week
set MNT_UPDATE in fsflags, and delete the
"update" option from the global mount options.
MNT_UPDATE is a command, and not a property of a mount
that should persist after the command is executed.
We need to do similar things for MNT_FORCE and MNT_RELOAD.
All mount flags are prefixed by MNT_..... it would
be nice if flags which were commands were named differently
from flags which are persistent properties of a mount.
This was not such a big deal in the pre-nmount() days,
but with nmount() it is more important.
Requested by: yar
MFC after: 2 weeks
and nfs requests processing. Lockmgr lock provides the shared locking for
nfs requests, while exclusive mode is used for modifications. The writer
starvation is handled by lockmgr too.
Reported by: kris, pho, many
Based on the submission by: mohan
Tested by: pho
MFC after: 2 weeks
for better structure.
Much of this is related to <sys/clock.h>, which should really have
been called <sys/calendar.h>, but unless and until we need the name,
the repocopy can wait.
In general the kernel does not know about minutes, hours, days,
timezones, daylight savings time, leap-years and such. All that
is theoretically a matter for userland only.
Parts of kernel code does however care: badly designed filesystems
store timestamps in local time and RTC chips almost universally
track time in a YY-MM-DD HH:MM:SS format, and sometimes in local
timezone instead of UTC. For this we have <sys/clock.h>
<sys/time.h> on the other hand, deals with time_t, timeval, timespec
and so on. These know only seconds and fractions thereof.
Move inittodr() and resettodr() prototypes to <sys/time.h>.
Retain the names as it is one of the few surviving PDP/VAX references.
Move startrtclock() to <machine/clock.h> on relevant platforms, it
is a MD call between machdep.c/clock.c. Remove references to it
elsewhere.
Remove a lot of unnecessary <sys/clock.h> includes.
Move the machdep.disable_rtc_set sysctl to subr_rtc.c where it belongs.
XXX: should be kern.disable_rtc_set really, it's not MD.
vnodes belonging to the mountpoint. Also, yield when in the
softdep_process_worklist() even when we are not going to sleep due to
buffer drain.
It is believed that the ULE fixed the problem [1], but the yielding
seems to be needed at least for the 4BSD case.
Discussed: on stable@, with bde
Reviewed by: tegge, jeff [1]
MFC after: 2 weeks
is to be requested via a "ro" option. At the same time, MNT_RDONLY
is gradually becoming an indicator of the current state of the FS
instead of a command flag. Today passing MNT_RDONLY alone to the
kernel's mount machinery will lead to various glitches. (See the
PRs for examples.)
Therefore mount the root FS with a "ro" option instead of the
MNT_RDONLY flag. (Note that MNT_RDONLY still is added to the mount
flags internally, by vfs_donmount(), if "ro" was specified.)
To be able to pass "ro" cleanly to kernel_vmount(), teach the latter
function to accept options with NULL values.
Also correct the comment explaining how mount_arg() handles length
of -1.
PR: bin/106636 kern/120319
Submitted by: Jaakko Heinonen <see PR kern/120319 for email> (originally)
- Remove the "thread" argument from the lockmgr() function as it is
always curthread now
- Axe lockcount() function as it is no longer used
- Axe LOCKMGR_ASSERT() as it is bogus really and no currently used.
Hopefully this will be soonly replaced by something suitable for it.
- Remove the prototype for dumplockinfo() as the function is no longer
present
Addictionally:
- Introduce a KASSERT() in lockstatus() in order to let it accept only
curthread or NULL as they should only be passed
- Do a little bit of style(9) cleanup on lockmgr.h
KPI results heavilly broken by this change, so manpages and
FreeBSD_version will be modified accordingly by further commits.
Tested by: matteo
conjuction with 'thread' argument passing which is always curthread.
Remove the unuseful extra-argument and pass explicitly curthread to lower
layer functions, when necessary.
KPI results broken by this change, which should affect several ports, so
version bumping and manpage update will be further committed.
Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
Remove this argument and pass curthread directly to underlying
VOP_LOCK1() VFS method. This modify makes the code cleaner and in
particular remove an annoying dependence helping next lockmgr() cleanup.
KPI results, obviously, changed.
Manpage and FreeBSD_version will be updated through further commits.
As a side note, would be valuable to say that next commits will address
a similar cleanup about VFS methods, in particular vop_lock1 and
vop_unlock.
Tested by: Diego Sardina <siarodx at gmail dot com>,
Andrea Di Pasquale <whyx dot it at gmail dot com>
mounted FS' problems. These are more along the lines of 'avoiding an
avoidable panic' than a complete solution to removable devices. We
now close the barn door after the horse has gotten lose and has been
hit by a truck, as it were. The barn no longer catches fire in this
case, but the horse is still dead :-).
The vfs_bio.c fix causes us not to put a failed write back into the
dirty pool if the error returned was ENXIO. In that case, the buffer
is treated like any other clean buffer that's being retured. ENXIO
means the device isn't there anymore and will never be there again in
the future, so retrying is futile.
The vfs_mount.c fix treats 'ENXIO' as success for unmounting a file
system. If the device is gone, retrying later won't help and we'll
never be able to unmount the device.
These two are part of a larger patch set submitted by the author. The
other patches will be forth coming. I added comments to these two
patches.
Submitted by: Henrik Gulbrandsen
Reviewed by: phk@
PR: usb/46176 (partial)
This makes updates mounts such as:
"mount -u -o rdonly" work more like, "mount -u -o ro".
References to "-o rdonly" were changed to "-o ro" in revision 1.60 of
the mount(8) man page,
but some people still like to use "-o rdonly" since it was documented
in earlier versions of FreeBSD.
Requested by: rwatson
MFC after: 1 week
out instead of returning an error.
(1) This makes the behavior consistent with mount(2).
(2) This makes update mounts on the root file system work properly.
(3) The explicit checks for MNT_ROOTFS in src/sbin/fsck_ffs/main.c
and src/usr.sbin/mountd/mountd.c which were put in to
eliminate errors during update mounts on the root file system
can be removed.
The only place were MNT_ROOTFS can be validly set
is inside the kernel, i.e. with vfs_mountroot_try().
Reviewed by: phk
MFC after: 3 days
from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:
mac_<object>_<method/action>
mac_<object>_check_<method/action>
The previous naming scheme was inconsistent and mostly
reversed from the new scheme. Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier. Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods. Also simplify, slightly,
some entry point names.
All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
