alter the userspace sockaddr to convert the format between linux and BSD versions.
That's the minimum 3 of copyin/copyout operations for one syscall.
Also some syscall uses linux_sa_put() and linux_getsockaddr() when load
sockaddr to userspace or from userspace accordingly.
To avoid this chaos, especially converting sockaddr in the userspace,
rewrite these 4 functions to convert sockaddr only in kernel and leave
only 2 of this functions.
Also in order to reduce duplication between MD parts of the Linuxulator put
struct sockaddr conversion functions that are MI out into linux_common module.
PR: 232920
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20157
This add ability to automatically load ipsec kernel module, when
if_ipsec(4) virtual interface is created using ifconfig(8).
Reviewed by: gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20169
Add support for DIM based on Linux,
with some minor adaptions specific to FreeBSD.
Linux commit
f97c3dc3c0e8d23a5c4357d182afeef4c67f5c33
MFC after: 3 days
Sponsored by: Mellanox Technologies
tun(4) and tap(4) share the same general management interface and have a lot
in common. Bugs exist in tap(4) that have been fixed in tun(4), and
vice-versa. Let's reduce the maintenance requirements by merging them
together and using flags to differentiate between the three interface types
(tun, tap, vmnet).
This fixes a couple of tap(4)/vmnet(4) issues right out of the gate:
- tap devices may no longer be destroyed while they're open [0]
- VIMAGE issues already addressed in tun by kp
[0] emaste had removed an easy-panic-button in r240938 due to devdrn
blocking. A naive glance over this leads me to believe that this isn't quite
complete -- destroy_devl will only block while executing d_* functions, but
doesn't block the device from being destroyed while a process has it open.
The latter is the intent of the condvar in tun, so this is "fixed" (for
certain definitions of the word -- it wasn't really broken in tap, it just
wasn't quite ideal).
ifconfig(8) also grew the ability to map an interface name to a kld, so
that `ifconfig {tun,tap}0` can continue to autoload the correct module, and
`ifconfig vmnet0 create` will now autoload the correct module. This is a
low overhead addition.
(MFC commentary)
This may get MFC'd if many bugs in tun(4)/tap(4) are discovered after this,
and how critical they are. Changes after this are likely easily MFC'd
without taking this merge, but the merge will be easier.
I have no plans to do this MFC as of now.
Reviewed by: bcr (manpages), tuexen (testing, syzkaller/packetdrill)
Input also from: melifaro
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20044
The DTS for this board is already present in sys/gnu/dts/arm64/rockchip/
and just needs to be enabled.
Submitted by: alex@wied.io
Differential Revision: https://reviews.freebsd.org/D19823
Some PPC systems (PowerNV) use msdosfs for /boot, which can't handle either
symlinks or hardlinks. So on PPC, copy the module instead. This change fixes
installkernel on such systems after r345350.
Reported by: Brandon Bergren <git_bdragon.rtk0.net>
Reviewed by: jhibbits, rgrimes
MFC after: 2 weeks
MFC-With: 345350, 346441
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19993
This GRE-in-UDP encapsulation allows the UDP source port field to be
used as an entropy field for load-balancing of GRE traffic in transit
networks. Also most of multiqueue network cards are able distribute
incoming UDP datagrams to different NIC queues, while very little are
able do this for GRE packets.
When an administrator enables UDP encapsulation with command
`ifconfig gre0 udpencap`, the driver creates kernel socket, that binds
to tunnel source address and after udp_set_kernel_tunneling() starts
receiving of all UDP packets destined to 4754 port. Each kernel socket
maintains list of tunnels with different destination addresses. Thus
when several tunnels use the same source address, they all handled by
single socket. The IP[V6]_BINDANY socket option is used to be able bind
socket to source address even if it is not yet available in the system.
This may happen on system boot, when gre(4) interface is created before
source address become available. The encapsulation and sending of packets
is done directly from gre(4) into ip[6]_output() without using sockets.
Reviewed by: eugen
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D19921
Tested by Greg V with mlx5en on an Ampere eMAG instance at Packet.com on
c2.large.arm (with some additional uncommitted PCIe WIP).
PR: 237055
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: hselasky
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19983
When aliasing a kernel module to a different name (ie if_igb for if_em),
it's better to use symlinks than hard links. kldxref will omit entries for
the links, ensuring that the loaded module has the correct name.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19979
PR#223036 reported that INET6 callback addresses were not printed by
nfsdumpstate(8). This kernel patch adds INET6 addresses to the dump structure,
so that nfsdumpstate(8) can print them out, post-r346190.
The patch also includes the addition of #ifdef INET, INET6 as requested
by bz@.
PR: 223036
Reviewed by: bz, rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19839
TMPFS_PAGES_MINRESERVED controls how much memory is reserved for the system
and not used by tmpfs.
On very small memory systems, the default value may be too high and this
prevents these small memory systems from using reroot, which is required
for them to install firmware updates.
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: mizhka
Differential Revision: https://reviews.freebsd.org/D13583
This module provides support for the Amazon Elastic Network Adapter; it
was previously only built on x86 architectures, but Amazon EC2 now also
has ARM64 instances with this hardware.
Submitted by: Greg V
This makes it more consistent with other filesystems, which all end in "fs",
and more consistent with its mount helper, which is already named
"mount_fusefs".
Reviewed by: cem, rgrimes
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19649
Update NAT64LSN implementation:
o most of data structures and relations were modified to be able support
large number of translation states. Now each supported protocol can
use full ports range. Ports groups now are belongs to IPv4 alias
addresses, not hosts. Each ports group can keep several states chunks.
This is controlled with new `states_chunks` config option. States
chunks allow to have several translation states for single alias address
and port, but for different destination addresses.
o by default all hash tables now use jenkins hash.
o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path.
o one NAT64LSN instance now can be used to handle several IPv6 prefixes,
special prefix "::" value should be used for this purpose when instance
is created.
o due to modified internal data structures relations, the socket opcode
that does states listing was changed.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
o most of data structures and relations were modified to be able support
large number of translation states. Now each supported protocol can
use full ports range. Ports groups now are belongs to IPv4 alias
addresses, not hosts. Each ports group can keep several states chunks.
This is controlled with new `states_chunks` config option. States
chunks allow to have several translation states for single alias address
and port, but for different destination addresses.
o by default all hash tables now use jenkins hash.
o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path.
o one NAT64LSN instance now can be used to handle several IPv6 prefixes,
special prefix "::" value should be used for this purpose when instance
is created.
o due to modified internal data structures relations, the socket opcode
that does states listing was changed.
Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC
CLAT is customer-side translator that algorithmically translates 1:1
private IPv4 addresses to global IPv6 addresses, and vice versa.
It is implemented as part of ipfw_nat64 kernel module. When module
is loaded or compiled into the kernel, it registers "nat64clat" external
action. External action named instance can be created using `create`
command and then used in ipfw rules. The create command accepts two
IPv6 prefixes `plat_prefix` and `clat_prefix`. If plat_prefix is ommitted,
IPv6 NAT64 Well-Known prefix 64:ff9b::/96 will be used.
# ipfw nat64clat CLAT create clat_prefix SRC_PFX plat_prefix DST_PFX
# ipfw add nat64clat CLAT ip4 from IPv4_PFX to any out
# ipfw add nat64clat CLAT ip6 from DST_PFX to SRC_PFX in
Obtained from: Yandex LLC
Submitted by: Boris N. Lytochkin
MFC after: 1 month
Relnotes: yes
Sponsored by: Yandex LLC
For some reason this seems to be required on aarch64, but I can build armv7
from clean without needing this in the list. (The file does get included,
so the mystery is why armv7 works.)
geom_flashmap depends on a slicer being available in order to do any
work. On fdt platforms this is provided by fdt_slicer, but this needs
to be available. Often it's compiled into the kernel for platforms that
boot from the relevant media, but this is not always the case. Add the
file to the geom_flashmap module so that it can be used on platforms
which don't always need this functionality available.
Embedded lzma decompression library becomes a module usable by other
consumers, in addition to geom_uzip.
Most important code changes are
- removal of XZ_DEC_SINGLE define, we need the code to work
with XZ_DEC_DYNALLOC;
- xz_crc32_init() call is removed from geom_uzip, xz module handles
initialization on its own.
xz is no longer embedded into geom_uzip, instead the depend line for
the module is provided, and corresponding kernel option is added to
each MIPS kernel config file using geom_uzip.
The commit also carries unrelated cleanup by removing excess "device geom_uzip"
in places which were missed in r344479.
Reviewed by: cem, hselasky, ray, slavash (previous versions)
Sponsored by: Mellanox Technologies
Differential revision: https://reviews.freebsd.org/D19266
MFC after: 3 weeks
Add support for simple NVDIMM v1.2 namespaces from the UEFI
version 2.7 specification. The combination of NVDIMM regions and
labels can lead to a wide variety of namespace layouts. Here we
support a simple subset of namespaces where each NVDIMM SPA range
is composed of a single region per member dimm.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
Discussed with: kib
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D18736
An upcoming bug fix requires 64-bit atomics, which aren't implemented on
powerpc. The powerpc port of fasttrap is incomplete anyway and doesn't
get loaded by dtraceall.ko on powerpc because of a missing dependency;
it's presumed that it's effectively unused.
Discussed with: jhibbits
MFC after: 2 weeks
Remove support for compiling drm2 as a module. This has transitioned
to the drm-kmod or drm-legacy-kmodw ports.
Approved by: graphics team
Reviewed by: manu@, mmel@
Differential Revision: https://reviews.freebsd.org/D19196
Retire the drm modules / drivers. These are now handled by the
drm-legacy-kmod port and/or the drm-kmod port. All future
development and maintanace will be handled there.
Approved by: graphics team
Reviewed by: manu@, mmel@
Differential Revision: https://reviews.freebsd.org/D19196
This adds the CBC-MAC code to the kernel, but does not hook it up to
anything (that comes in the next commit).
https://tools.ietf.org/html/rfc3610 describes the algorithm.
Note that this is a software-only implementation, which means it is
fairly slow.
Sponsored by: iXsystems Inc
Differential Revision: https://reviews.freebsd.org/D18592
