fd_set bits in select(2). It seems that historical behaviour is to not
reporting exception on EOF, and several applications are broken.
Reported by: Yoshihiko Sarumaru <ysarumaru gmail com>
Discussed with: bde
PR: ports/140934
MFC after: 2 weeks
for upcoming 64-bit PowerPC and MIPS support. This renames the COMPAT_IA32
option to COMPAT_FREEBSD32, removes some IA32-specific code from MI parts
of the kernel and enhances the freebsd32 compatibility code to support
big-endian platforms.
Reviewed by: kib, jhb
well-known race condition, which elimination was the reason for the
function appearance in first place. If sigmask supplied as argument to
pselect() enables a signal, the signal might be delivered before thread
called select(2), causing lost wakeup. Reimplement pselect() in kernel,
making change of sigmask and sleep atomic.
Since signal shall be delivered to the usermode, but sigmask restored,
set TDP_OLDMASK and save old mask in td_oldsigmask. The TDP_OLDMASK
should be cleared by ast() in case signal was not gelivered during
syscall execution.
Reviewed by: davidxu
Tested by: pho
MFC after: 1 month
longs. Since 32bit processes longs are 4 bytes, 64bit kernel may copy in
or out 4 bytes more then the process expected.
Calculate the amount of bytes to copy taking into account size of fd_set
for the current process ABI.
Diagnosed and tested by: Peter Jeremy <peterjeremy acm org>
Reviewed by: jhb
MFC after: 1 week
returning POLLHUP instead of POLLIN for several cases. Now, the
tools/regression/poll results for FreeBSD are closer to that of the
Solaris and Linux.
Also, improve the POSIX conformance by explicitely clearing POLLOUT
when POLLHUP is reported in pollscan(), making the fix global.
Submitted by: bde
Reviewed by: rwatson
MFC after: 1 week
using the size of the descriptor array.
- A lock is not needed to fetch fd_lastfile. The results are stale the
instant it is dropped.
- Use a private mutex pool for select since the pool mutex is not used
as a leaf.
- Fetch the si_mtx pointer first before resorting to hashing to compute
the mutex address.
Reviewed by: McKusick
Approved by: re (kib)
specific macros for each audit argument type. This makes it easier to
follow call-graphs, especially for automated analysis tools (such as
fxr).
In MFC, we should leave the existing AUDIT_ARG() macros as they may be
used by third-party kernel modules.
Suggested by: brooks
Approved by: re (kib)
Obtained from: TrustedBSD Project
MFC after: 1 week
fget_unlocked().
- Save old file descriptor tables created on expansion until
the entire descriptor table is freed so that pointers may be
followed without regard for expanders.
- Mark the file zone as NOFREE so we may attempt to reference
potentially freed files.
- Convert several fget_locked() users to fget_unlocked(). This
requires us to manage reference counts explicitly but reduces
locking overhead in the common case.
poll(), only copy out the revents field, not the whole pollfd
structure. Otherwise, if the events field is updated
concurrently by another thread, that update may be lost.
This issue apparently causes problems for the JDK on FreeBSD,
which expects the Linux behavior of not updating all fields
(somewhat oddly, Solaris does not implement the required
behavior, but presumably our adaptation of the JDK is based
on the Linux port?).
MFC after: 2 weeks
PR: kern/130924
Submitted by: Kurt Miller <kurt @ intricatesoftware.com>
Discussed with: kib
poll_no_poll().
Return a poll_no_poll() result from devfs_poll_f() when
filedescriptor does not reference the live cdev, instead of ENXIO.
Noted and tested by: hps
MFC after: 1 week
- Restructure selscan() and selrescan() to avoid producing extra selfps
when we have a fd in multiple sets. As described below multiple selfps
may still exist for other reasons.
- Make selrescan() tolerate multiple selfds for a given descriptor
set since sockets use two selinfos per fd. If an event on each selinfo
fires selrescan() will see the descriptor twice. This could result in
select() returning 2x the number of fds actually existing in fd sets.
Reported by: mgleason@ncftp.com
- In the last revision the code was changed to use maxfilesperproc rather than
the per-process file limit to restrict the size of the poll array. This
eliminates a significant source of process lock contention in multithreaded
programs and is cheaper. This had been committed with the wrong batch of
changes.
requiring the per-process spinlock to only requiring the process lock.
- Reflect these changes in the proc.h documentation and consumers throughout
the kernel. This is a substantial reduction in locking cost for these
fields and was made possible by recent changes to threading support.
This makes it possible to support ftruncate() on non-vnode file types in
the future.
- 'struct fileops' grows a 'fo_truncate' method to handle an ftruncate() on
a given file descriptor.
- ftruncate() moves to kern/sys_generic.c and now just fetches a file
object and invokes fo_truncate().
- The vnode-specific portions of ftruncate() move to vn_truncate() in
vfs_vnops.c which implements fo_truncate() for vnode file types.
- Non-vnode file types return EINVAL in their fo_truncate() method.
Submitted by: rwatson
- Introduce a finit() which is used to initailize the fields of struct file
in such a way that the ops vector is only valid after the data, type,
and flags are valid.
- Protect f_flag and f_count with atomic operations.
- Remove the global list of all files and associated accounting.
- Rewrite the unp garbage collection such that it no longer requires
the global list of all files and instead uses a list of all unp sockets.
- Mark sockets in the accept queue so we don't incorrectly gc them.
Tested by: kris, pho
details from consumers.
- Track individual selecters on a per-descriptor basis such that there
are no longer collisions and after sleeping for events only those
descriptors which triggered events must be rescaned.
- Protect the selinfo (per descriptor) structure with a mtx pool mutex.
mtx pool mutexes were chosen to preserve api compatibility with
existing code which does nothing but bzero() to setup selinfo
structures.
- Use a per-thread wait channel rather than a global wait channel.
- Hide select implementation details in a seltd structure which is
opaque to the rest of the kernel.
- Provide a 'selsocket' interface for those kernel consumers who wish to
select on a socket when they have no fd so they no longer have to
be aware of select implementation details.
Tested by: kris
Reviewed on: arch
opposed to what process. Since threads by default have teh name of the
process unless over-written with more useful information, just print the
thread name instead.
- Use thread_lock() rather than sched_lock for per-thread scheduling
sychronization.
- Use the per-process spinlock rather than the sched_lock for per-process
scheduling synchronization.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
and flags with an sxlock. This leads to a significant and measurable
performance improvement as a result of access to shared locking for
frequent lookup operations, reduced general overhead, and reduced overhead
in the event of contention. All of these are imported for threaded
applications where simultaneous access to a shared file descriptor array
occurs frequently. Kris has reported 2x-4x transaction rate improvements
on 8-core MySQL benchmarks; smaller improvements can be expected for many
workloads as a result of reduced overhead.
- Generally eliminate the distinction between "fast" and regular
acquisisition of the filedesc lock; the plan is that they will now all
be fast. Change all locking instances to either shared or exclusive
locks.
- Correct a bug (pointed out by kib) in fdfree() where previously msleep()
was called without the mutex held; sx_sleep() is now always called with
the sxlock held exclusively.
- Universally hold the struct file lock over changes to struct file,
rather than the filedesc lock or no lock. Always update the f_ops
field last. A further memory barrier is required here in the future
(discussed with jhb).
- Improve locking and reference management in linux_at(), which fails to
properly acquire vnode references before using vnode pointers. Annotate
improper use of vn_fullpath(), which will be replaced at a future date.
In fcntl(), we conservatively acquire an exclusive lock, even though in
some cases a shared lock may be sufficient, which should be revisited.
The dropping of the filedesc lock in fdgrowtable() is no longer required
as the sxlock can be held over the sleep operation; we should consider
removing that (pointed out by attilio).
Tested by: kris
Discussed with: jhb, kris, attilio, jeff
- Remove also "MP SAFE" after prior "MPSAFE" pass. (suggested by bde)
- Remove extra blank lines in some cases.
- Add extra blank lines in some cases.
- Remove no-op comments consisting solely of the function name, the word
"syscall", or the system call name.
- Add punctuation.
- Re-wrap some comments.
system calls now enter without Giant held, and then in some cases, acquire
Giant explicitly.
Remove a number of other MPSAFE annotations in the credential code and
tweak one or two other adjacent comments.
this patch the code behaves according to the comment on the line above.
Without this patch, a socket could cause SIGPIPE to be delivered to its
process, once with SO_NOSIGPIPE set, and twice without.
With this patch, the kernel now passes the sigpipe regression test.
Tested by: Anton Yuzhaninov
MFC after: 1 week
if backward copatibility options are present) from attempting
to free memory that wasn't allocated. This is an old bug, and
previously it would attempt to free a null pointer. I noticed
this bug when working on the previous revision, but forgot to
fix it.
Security: local DoS
Reported by: Peter Holm
MFC after: 3 days
ioctls passing integer arguments should use the _IOWINT() macro.
This fixes a lot of ioctl's not working on sparc64, most notable
being keyboard/syscons ioctls.
Full ABI compatibility is provided, with the bonus of fixing the
handling of old ioctls on sparc64.
Reviewed by: bde (with contributions)
Tested by: emax, marius
MFC after: 1 week
that the 'data' pointer is already setup to point to a valid KVM buffer
or contains the copied-in data from userland as appropriate (ioctl(2)
still does this). kern_ioctl() takes care of looking up a file pointer,
implementing FIONCLEX and FIOCLEX, and calling fi_ioctl().
- Use kern_ioctl() to implement xenix_rdchk() instead of using the stackgap
and mark xenix_rdchk() MPSAFE.
returns EBADF. That errno is correct and is mandated by POSIX. It also
goes back to revision 1.1 of our CVS history (i.e. 4.4BSD).
The _fget() function should probably also be upated as it currently returns
EINVAL in that case rather than EBADF. (It does return EBADF for reads
on a write-only descriptor without any XXX comments oddly enough.)
Discussed with: scottl, grog, mjacob, bde
and writev() except that they take an additional offset argument and do
not change the current file position. In SAT speak:
preadv:readv::pread:read and pwritev:writev::pwrite:write.
- Try to reduce code duplication some by merging most of the old
kern_foov() and dofilefoo() functions into new dofilefoo() functions
that are called by kern_foov() and kern_pfoov(). The non-v functions
now all generate a simple uio on the stack from the passed in arguments
and then call kern_foov(). For example, read() now just builds a uio and
calls kern_readv() and pwrite() just builds a uio and calls kern_pwritev().
PR: kern/80362
Submitted by: Marc Olzheim marcolz at stack dot nl (1)
Approved by: re (scottl)
MFC after: 1 week
ioctl numbers in backwards compatability mode. eg: an IOC_IN ioctl with
a size of zero. Traditionally this was what you did before IOC_VOID
existed, and we had some established users of this in the tree, namely
procfs. Certain 3rd party drivers with binary userland components also
have this too.
This is necessary to have 4.x and 5.x binaries use these ioctl's. We
found this at work when trying to run 4.x binaries.
Approved by: re
missed that when the vnode bypass was introduced.
Deal with zero length transfers before we even get to fo_ops->fo_read().
Found by: Slawa Olhovchenkov <slwzxy.spb.ru@zxy.spb.ru>
PR: 75758
Don't grab Giant in the upper syscall/wrapper code
NET_LOCK_GIANT in the socket code (sockets/fifos).
mtx_lock(&Giant) in the vnode code.
mtx_lock(&Giant) in the opencrypto code. (This may actually not be
needed, but better safe than sorry).
Devfs grabs Giant if the driver is marked as needing Giant.
Don't grab Giant in the upper syscall/wrapper code
NET_LOCK_GIANT in the socket code (sockets/fifos).
mtx_lock(&Giant) in the vnode code.
Devfs grabs Giant if the driver is marked as needing Giant.
Use this in all the places where sleeping with the lock held is not
an issue.
The distinction will become significant once we finalize the exact
lock-type to use for this kind of case.
pollfd's to avoid calling malloc() on small numbers of fd's. Because
smalltype's members have type char, its address might be misaligned
for a struct pollfd. Change the array of char to an array of struct
pollfd.
PR: kern/58214
Submitted by: Stefan Farfeleder <stefan@fafoe.narf.at>
Reviewed by: bde (a long time ago)
MFC after: 3 days
Add copyiniov() which copies a struct iovec array in from userland into
a malloc'ed struct iovec. Caller frees.
Change uiofromiov() to malloc the uio (caller frees) and name it
copyinuio() which is more appropriate.
Add cloneuio() which returns a malloc'ed copy. Caller frees.
Use them throughout.
