weren't displayed on the new console. However, the config string has been
altered as part of being parsed so we only display the first option. Fix
this by saving a copy of /boot.config before parsing it and displaying the
saved copy after parsing.
MFC after: 1 week
PR: i386/103972
Submitted by: Alexandre Belloni alexandre.belloni of netasq.com
o Disable interrupts while not running U-Boot code. We clobber
registers that the U-Boot interrupt handlers assume to be
fixed as per the U-Boot register usage. At this time this only
applies to r14. U-Boot uses r2 now for what they used r29 for.
After we restore r14 in preparation of doing the syscall, we
re-enable interrupts. When we return from the syscall, we
disable interrupts and restore the callee-saved r14.
(link) address and the physical (load) address. Ideally, the mapping
between link and load addresses should be abstracted by the copyin(),
copyout() and readin() functions, so that we don't have to add kluges
in __elfN(loadimage)(). Then, we could also have paged virtual memory
for the kernel. This can be important under EFI, where you need to
allocate physical memory form the firmware if you want to work in all
scenarios.
o Move the API prototypes to a separate header (glue.h)
o Allow the platform to hint libuboot about where to look
for the API signature. The uboot_address variable is
expected to be defined by the platform.
Turn off TFTP support by default: when both TFTP and NFS are enabled in the
loader, strange interactions occur in the pure netbooting scenario (i.e.
loader is TFTP-ed, kernel+world mounted over NFS), leading to very slow access
to the NFS-exported files.
Reviewed by: grehan
Approved by: cognet (mentor)
encounters a syntax error, and add a tip about adding first
the `vital' options and then experimental ones.
PR: docs/119658
Submitted by: Julian Stacey, jhs at berklix.org
Enhanced Disk Drive Specification Ver 3.0 defines that the version
of extension in AH would be 30h.
Correct the check for that to be >=30h instead of >3h.
MFC after: 2 months
defined. This lets each boot program choose which version of cgbase() it
wants to use rather than forcing ufsread.c to have that knowledge.
MFC after: 1 week
Discussed with: imp
saves about 500 bytes in the boot code. While the AT91RM9200 has 12k
of space for the boot loader, which is more than i386's 8k, the code
generated by gcc is a bit bigger.
I've had this in p4 for about two years now.
Rework the read/write support in the bios disk driver some to cut down
on duplicated code.
- All of the bounce buffer and retry logic duplicated in bd_read() and
bd_write() are merged into a single bd_io() routine that takes an
extra direction argument. bd_read() and bd_write() are now simple
wrappers around bd_io().
order. The kernel used to shuffle them around to get things right,
but that was recently fixed. This makes our boot loader match the
behavior of most other boot loaders for the atmel parts. This bug was
inherited from the Kwikbyte loader that we started from.
This bug was discovered by Bj.ANvrn KNvnig back in June, but fell on the
floor. He provided patches to the kernel, include backwards
compatibility options that were similar to Olivier's if_ate.c commit.
on i386 and amd64 machines. The overall process is that /boot/pmbr lives
in the PMBR (similar to /boot/mbr for MBR disks) and is responsible for
locating and loading /boot/gptboot. /boot/gptboot is similar to /boot/boot
except that it groks GPT rather than MBR + bsdlabel. Unlike /boot/boot,
/boot/gptboot lives in its own dedicated GPT partition with a new
"FreeBSD boot" type. This partition does not have a fixed size in that
/boot/pmbr will load the entire partition into the lower 640k. However,
it is limited in that it can only be 545k. That's still a lot better than
the current 7.5k limit for boot2 on MBR. gptboot mostly acts just like
boot2 in that it reads /boot.config and loads up /boot/loader. Some more
details:
- Include uuid_equal() and uuid_is_nil() in libstand.
- Add a new 'boot' command to gpt(8) which makes a GPT disk bootable using
/boot/pmbr and /boot/gptboot. Note that the disk must have some free
space for the boot partition.
- This required exposing the backend of the 'add' function as a
gpt_add_part() function to the rest of gpt(8). 'boot' uses this to
create a boot partition if needed.
- Don't cripple cgbase() in the UFS boot code for /boot/gptboot so that
it can handle a filesystem > 1.5 TB.
- /boot/gptboot has a simple loader (gptldr) that doesn't do any I/O
unlike boot1 since /boot/pmbr loads all of gptboot up front. The
C portion of gptboot (gptboot.c) has been repocopied from boot2.c.
The primary changes are to parse the GPT to find a root filesystem
and to use 64-bit disk addresses. Currently gptboot assumes that the
first UFS partition on the disk is the / filesystem, but this algorithm
will likely be improved in the future.
- Teach the biosdisk driver in /boot/loader to understand GPT tables.
GPT partitions are identified as 'disk0pX:' (e.g. disk0p2:) which is
similar to the /dev names the kernel uses (e.g. /dev/ad0p2).
- Add a new "freebsd-boot" alias to g_part() for the new boot UUID.
MFC after: 1 month
Discussed with: marcel (some things might still change, but am committing
what I have so far)
on duplicated code and support 64-bit LBAs for GPT.
- The code to manage an EDD or C/H/S I/O request are now in their own
routines. The EDD routine now handles a full 64-bit LBA instead of
truncating LBAs to the lower 32-bits. (MBRs and BSD labels only
have 32-bit LBAs anyway, so the only LBAs ever passed down were 32-bit).
- All of the bounce buffer and retry logic duplicated in bd_read() and
bd_write() are merged into a single bd_io() routine that takes an
extra direction argument. bd_read() and bd_write() are now simple
wrappers around bd_io().
- If a disk supports EDD then always use it rather than only using it if
the cylinder is > 1023. Other parts of the boot code already do
something similar to this. Also, GPT just uses LBAs, so for a GPT disk
it's probably best to ignore C/H/S completely. Always using EDD when
it is supported by a disk is an easy way to accomplish this.
MFC after: 1 week
Slightly cleanup the 'bootdev' concept on x86 by changing the various
macros to treat the 'slice' field as a real part of the bootdev instead
of as hack that spans two other fields (adaptor (sic) and controller)
that are not used in any modern FreeBSD boot code.
macros to treat the 'slice' field as a real part of the bootdev instead
of as hack that spans two other fields (adaptor (sic) and controller)
that are not used in any modern FreeBSD boot code.
MFC after: 1 week
Add support for the CENTIPAD board (http://www.harerod.de/centipad/index.html)
(which is a very cool, very small ARM board)
Add support for KB9202B (it has different memory)
Make BOOT_FLAVOR settable
Minor cleanup nits
Approved by: re@
of obtaining them over and over again and pretending we could do
anything useful without them (for chosen this includes adding a
declaration and initializing it in OF_init()).
- In OF_init() if obtaining the memory or mmu handle fails just call
OF_exit() instead of panic() as the loader hasn't initialized the
console at these early stages yet and trying to print out something
causes a hang. With OF_exit() one at least has a change to get back
to the OFW boot monitor and debug the problem.
- Fix OF_call_method() on 64-bit machines (this is a merge of
sys/dev/ofw/openfirm.c rev 1.6).
- Replace OF_alloc_phys(), OF_claim_virt(), OF_map_phys() and
OF_release_phys() in the MI part of the loader with wrappers around
OF_call_method() in the sparc64. Beside the fact that they duplicate
OF_call_method() the formers should never have been in the MI part
of the loader as contrary to the OFW spec they use two-cell physical
addresses.
- Remove unused functions which are also MD dupes of OF_call_method().
- In sys/boot/sparc64/loader/main.c add __func__ to panic strings as
different functions use otherwise identical panic strings and make
some of the panic strings a tad more user-friendly instead of just
mentioning the name of the function that returned an unexpected
result.
- Add missing prototypes.
- Define global variables not used outside of this module as static.
- Replace some outdated hard-coded functions names in panic strings
with __func__.
- Fix some style(9) bugs.
It is disabled by default. You need to put
LOADER_FIREWIRE_SUPPORT=yes in /etc/make.conf
and rebuild loader to enable it.
(cd /sys/boot/i386 && make clean && make && make install)
You can find a short introduction of dcons at
http://wiki.freebsd.org/DebugWithDcons
speculative loads. This at least makes control speculative loads
work. In the future we should analyze which faults/exceptions
we want to handle rather than defer to avoid having to call the
recovery code when it's not strictly necessary.
- Added magic numbers to pretend the NEC original program version
2.70.
- Added string display routine with Shift-JIS code support.
- Added three nop instructions at start1 in start.s since the
installaer of the IPLware put 'call $0x09ab' instruction.
- Put the near return instruction at 0x9ab in selector.s.
Since the Shit-JIS display routine must be located at 0x1243, the
linker script file (ldscript) is applied.
bootinfo variable declaration visible. It conflicts with static
declaration in this file. Declare variable as globally visible in
order to resolve the conflict.
GetSeconds(). Instead, use CRTR register shifted right 15. This
gives us a range of 32 seconds we can do for timeout.
Shift to using == rather than < or > for calculating the timeout,
since if we can't read the ST_CTRT register twice in a second we have
even bigger problems to worry about, and == deals with the 'wrap'
issue.
This lets me type at the boot2 prompt again! Woo Hoo!
Bogusness noticed by: tisco
Pointy Hat to: That silly imp guy
CSD is usually 512 (well, 9), but for 2GB (and the rogue 4GB SD cards)
it is 1024 (or 2048 for 4GB). This value doesn't work for the block
read commands (which really want 512). Hardcode 512 for those. This
may break really old MMC cards that don't have a 512 block size (I've
never seen one: make my day and send me one :-), but since the MMC
side of the house is currently broken, it should only have the effect
that 2GB (and non-conforming 4GB) SD cards will work.
My 'non-conforming' 4GB SD card also works now too. The
non-conforming 4GB SD cards were sold for a while before the SD
association was worried they would be (a) incompatible (different FAT
flavor on them) and (b) confusing for the new SDHC standard and
cracked down on suppliers' bogus use of the SD trademark...
The changes to getstr() is so that the character that is
passed in to it, is also processed just as the rest. I also
removed one of the getc() calls otherwise you loose every
second character.
I also changed the strcpy of kname, so that it only happens if
kname is '\0'. This is so that one can pass a kernel in
through /boot.config.
The last change to boot2.c is in parse(). If you tried to type
a kernel name to boot, the first character was lost, the arg--
fix that.
Submitted by: jhay
bioscom is called to set up serial port parameters because COMSPEED
was treated as an address instead of an immediate value, causing
serial port parameters to never be set.
PR: i386/110828
Reviewed by: jhb
MFC after: 2 weeks
The relevant changes for FreeBSD (excerpt from the release note):
* Newly implemented CORE EXT words: CASE, OF, ENDOF, and ENDCASE. Also
added FALLTHROUGH, which works like ENDOF but jumps to the instruction
just after the next OF.
* Bugfix: John-Hopkins locals syntax now accepts | and -- in the comment
(between the first -- and the }.)
* Bugfix: Changed vmGetWord0() to make Purify happier. The resulting
code is no slower, no larger, and slightly more robust.
I created and tested this with a custom FreeSBIE cd-image.
PR: i386/96452
Submitted by: Yuichiro Goto <y7goto at gmail dot com>
MFC after: 3 days
Approved by: imp (mentor)
rather than treating them as a fatal exception and halting. At least one
storage BIOS (some newer mpt(4) parts) have a breakpoint instruction in
their disk read routine.
MFC after: 3 days
