Add flag to the makefile to allow loader compilation as
Little-Endian 32-bit executable.
Usage:
make WITH_LOADER_FORCE_LE=yes -C sys/boot all
Submitted by: Wojciech Macek <wma@freebsd.org>
Reviewed by: imp, nwhitehorn
Obtained from: Semihalf
Sponsored by: QCM Technologies
Differential revision: https://reviews.freebsd.org/D12421
Start the phasing out of TRE by disabling it by default. r317254 introduced
a BSD_GREP_FASTMATCH knob (defaulting to on) for testing of bsdgrep with and
without TRE enabled. More bugs have cropped up since then, and
WITHOUT_BSD_GREP_FASTMATCH has shown in testing to be more stable than its
counterpart.
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12381
== Rationale ==
r295380 introduced "make check" and consolidated means for running
test code in an attempt to simplify running tests. One could either
install files/libraries/programs and run "make check", or run "make check"
with an explicit CHECKDIR, e.g., `make check CHECKDIR=$(make -V.OBJDIR)``.
One criticism that was received is that "make check" should be run with
the intent of making dev->test->commit easier, which means that the target
audience's workflow should be developers. One developer pattern available
in other opensource projects is to run test code from a developer sandbox,
instead of installing to a system.
== Method ==
This approach is slightly different from the standard approach, in the sense
that it builds and installs into a deterministic directory under .OBJDIR (as I call it,
the "sandbox"), then runs "make check" against that. In the event the test
run is successful, the deterministic directory is removed to save space.
== Approach ==
bsd.lib.mk, bsd.prog.mk:
To support this functionality, a new variable `HAS_TESTS` is being added.
HAS_TESTS enables appropriate behavior with bsd.lib.mk and bsd.prog.mk, as
follows:
- Add "make check" as an available target from the directory.
- Pass down appropriate variables via ${TESTS_ENV}, i.e.,
${TESTS_LD_LIBRARY_PATH} and ${TESTS_PATH}.
One should add "HAS_TESTS" to directories containing tests in them, e.g. from
bin/sh/Makefile,
HAS_TESTS=
SUBDIR.${MK_TESTS}+= tests
HAS_TESTS doesn't automatically add the tests subdirectory for flexibility
reasons.
bsd.opts.mk, src.opts.mk:
- The knob ${MK_MAKE_CHECK_USE_SANDBOX} has been added, both to explicitly
direct (internally) when to set a deterministic ${DESTDIR} and to also allow
users to disable this behavior globally, i.e., via src.conf.
- MK_TESTS has been promoted from src.opts.mk to bsd.opts.mk to leverage
syntactic sugar for having MK_TESTS be a dependency for
MK_MAKE_CHECK_USE_SANDBOX, but to also ensure that src.opts.mk isn't required
to use suite.test.mk (which is a dependency of bsd.test.mk).
suite.test.mk:
- beforecheck behavior (when MK_MAKE_CHECK_USE_SANDBOX is enabled) is modified
from a no-op to:
-- Build.
-- Run "make hierarchy" on the sandbox dir.
-- Install the tests/files to the sandbox dir.
- aftercheck behavior (when MK_MAKE_CHECK_USE_SANDBOX is enabled) is modified
from a no-op to:
-- Remove the sandbox dir.
Again, because the dependency order set in bsd.test.mk is
beforecheck -> check -> aftercheck, "make check" will not be run unless
"beforecheck" completes successfully, and "aftercheck" will not be run unless
"beforecheck" and "check" complete successfully.
== Caveats ==
- This target must either be run with MK_INSTALL_AS_USER or as root. Otherwise
it will fail when running "make install" as the default user/group for many
makefiles when calling INSTALL is root/wheel.
- This target must be run from a suitable top-level directory. For example,
running tests from `tests/sys/fs/tmpfs` won't work, but `tests/sys/fs` will,
because `tests/sys/fs/tmpfs` relies on files installed by `tests/sys/fs`.
- Running MK_INSTALL_AS_USER may introduce determinism issues. However, using
it could identify deficiences in tests in terms of needing to be run as
root, which are not properly articulated in the test requirements.
- The doesn't negate the need for running "make installworld" and
"make checkworld", etc. Again, this just is intended to simplify the
dev->test->commit workflow.
== Cleanup done ==
- CHECKDIR is removed; one can use "MK_MAKE_CHECK_USE_SANDBOX=no" to enable
"legacy" (r295380) behavior.
MFC after: 2 months
Relnotes: yes (CHECKDIR removed; "make check" behavior changed)
Requested by: jhb
Reviewed by: arch (silence), testing (silence)
Differential Revision: D11905
The assembly in sys/mips/include/profile.h will only work for o32 ABI.
Submitted by: Alexander Richardson
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11950
`MK_ZONEINFO_LEAPSECONDS_SUPPORT == yes` and
`MK_ZONEINFO_OLD_TIMEZONES_SUPPORT == yes`.
Keep `LEAPSECONDS` and `OLDTIMEZONES` for backwards compatibility,
but print out a warning notifying users that they should use the new
variables, in an effort to migrate them to the variables. This is being
done mostly for automated build tools, etc, that might rely on these
variables being set. The variables will be removed in the future on
^/head, e.g., after ^/stable/12 is cut.
MFC after: 1 month
Relnotes: yes
Reviewed by: bdrewery
Differential Revision: D11376
The BSDL dtc has grown the needed features (overlays mostly) and is able to
compile all of our base DTS.
You can use WITH_GPL_DTC is you need the GPL one or DTC= in make.conf(5)
to specify an alternate location for the compiler to use.
Discussed with: emaste, imp
All manpages in base are now compatible with mandoc(1), all roff documentation
will be relocated in the doc tree. man(1) can now use groff from the ports tree
if it needs.
Also remove checknr(1) and colcrt(1) which are only useful with groff.
Approved by: (no objections on the mailing lists)
r316647 corrected the build of tblgen and libllvm as dependencies for
LLD so undo the temporary seat-belt.
We still want to extend the build infrastructure to automatically detect
the case where the host LLD can be used instead of building a bootstrap
LLD, and likely extend libllvmminimal to meet LLD's needs for cases
where the build includes LLD but not Clang.
Sponsored by: The FreeBSD Foundation
When this option is enabled, only gdb and kgdb are installed to
/usr/libexec for use by crashinfo(8). Other bits of GDB such as
gdbserver and gdbtui are not installed. For this option to be
effective, GDB must be enabled.
Rework r317094 to re-enable GDB on all platforms but enable
GDB_LIBEXEC on platforms for which the GDB in ports is a superset of
functionality.
Reviewed by: emaste, kib
Suggested by: kib
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D10449
The GNU extension bits in the base system are old, no longer faithful
to upstream, and surprising in some regards. Switch to documenting
WITH_GNU_GREP_COMPAT and default GNU_GREP_COMPAT to OFF in the name of
good behavior.
According to http://www.regular-expressions.info, GNU extensions:
- Add missing quantifiers to BREs: \?, \+
- Add branching to BREs: \|
- Add backreferences (\1 through \9) to EREs
- Add \w, \W, \s, and \S corresponding to :alnum:, [^[:alnum:]],
:space:, and [^[:space:]] respectively
- Add word boundaries and anchors:
\b: word boundary
\B: not word boundary
\<: Strt of word
\>: End of word
\`: Start of subject string
\': End of subject string
These extensions are still available in /usr/bin/grep by default today,
as it is still GNU grep. As part of the bsdgrep migration plan these
extensions may be added to bsdgrep's regex support if necessary.
Submitted by: Kyle Evans <kevans91 at ksu.edu>
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D10114
Bugs have been found in the fastmatch implementation as used in bsdgrep.
Some have been fixed (r316495) while fixes for others are in review
(D10098).
In comparison with the fastmatch implementation, Kyle Evans found that:
- regex(3)'s performance with literal expressions offers a speed
improvement over fastmatch
- regex(3)'s performance, both with simple BREs and EREs, seems to be
comparable
The regex implementation was imported in r226035, and the commit message
reports:
This is a temporary solution until the whole regex library is
not replaced so that BSD grep development can continue and the
backported code gets some review and testing. This change only
improves scalability slightly, there is no big performance boost
yet but several minor bugs have been found and fixed.
Introduce a WITH_/WITHOUT_BSD_GREP_FASTMATCH knob to support testing
of both approaches.
PR: 175314, 194823
Submitted by: Kyle Evans <kevans91 at ksu.edu>
Reviewed by: bdrewery (in part)
Differential Revision: https://reviews.freebsd.org/D10282
rpcbind(8) with/without warmstart support.
The knob defaults to off to preserve POLA for the feature.
See rpcbind(8) for more details about the warmstart feature.
MFC after: 7 weeks
Relnotes: yes
Sponsored by: Dell EMC Isilon
These have no effect (and WITHOUT_GNU is documented as having no
effect). I intend to later introduce a WITHOUT_GPL knob to serve a
similar purpose as WITHOUT_GNU's previously documented intent, but with
a more accurate name. To avoid confusion over the transition though just
remove the existing, nonfunctional ones.
GDB in ports contains all of the functionality as GDB in base
(including kgdb) for these platforms along with additional
functionality. In-tree GDB remains enabled on ARM and sparc64.
GDB in ports does not currently support kernel debugging on arm,
and ports GDB for sparc64 has not been tested (though it does
include sparc64 support).
Reviewed by: bdrewery, emaste, imp
Relnotes: yes
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D10399
Add WITH_LLD_BOOTSTRAP and WITHOUT_LLD_BOOTSTRAP knobs, similar to the
Clang bootstrap knobs.
Reviewed by: dim
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10249
Move cxgbetool from tools/tools to usr.sbin. Compile and install it on
platforms where cxgbe(4) is built by default. Knobs (WITH_CXGBETOOL and
WITHOUT_CXGBETOOL) have been added so that the user can override the
default setting.
Reviewed by: ngie@, gnn@, bdrewery@
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D9854
compile options. Remove doxygen pointers to now deleted files. Remove
EISA and VME as examples in bus_space.9.
Retained EISA mode code for IO PIC and MPTABLES because that's not
EISA bus, per se, and some people have abused EISA to mean "EISA-like
behavior as opposed to ISA" rather than using it for EISA add-in
cards.
Relnotes: yes
If WITH_LLD is disabled LLD is not built and cannot be installed as
/usr/bin/ld, so disable WITH_LLD_IS_LD.
Currently we do not compare the LLD host/in-tree version and LLD
requires the LLVM libraries to be built, so force WITH_SYSTEM_COMPILER
off when WITH_LLD_IS_LD is set.
The logic for bootstrapping LLD requires some tidying later. We should
be able to detect that the host linker is the same version and avoid
building LLD in the same way that WITH_SYSTEM_COMPILER handles Clang.
We also may be able to extend libllvmminimal to meet LLD's needs. For
now this change unbreaks buildworld with default settings except for
WITH_LLD_IS_LD.
Reported by: Shawn Webb
Reviewed by: bdrewery
Tested by: Shawn Webb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D9487
With this change LLD will be built on the same set of architectures that
use Clang as /usr/bin/cc. It is not yet fully functional as a system
linker for i386 and arm, but is ready for further testing and
investigation.
Recent versions of Clang are becoming usable for non-x86 non-arm FreeBSD
architectures. If the compiler is capable of building Clang, do so in
order to facilitate further testing.
Reviewed by: dim, imp
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8267
For the case that someone set WITHOUT_GSSAPI=, now WITHOUT_KERBEROS_SUPPORT
will be properly set.
This will likely fix the issue for the default case noted in the PR I filed
back in 2011. I am trying to fix the less obvious case documented in the PR
still.
MFC after: 2 weeks
PR: 159745
When WITH_REPRODUCIBLE_BUILD=yes is set in src.conf(5), eliminate the
time, user, and host from the loader's version information. This allows
builds to produce bit-for-bit identical output.
Reviewed by: bapt
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8842
If set it installs LLD as /usr/bin/ld. LLD (as of version 3.9) is not
capable of linking the world and kernel, but can self-host and link many
substantial applications. GNU ld continues to be used for the world and
kernel build, regardless of how this knob is set.
It is on by default for arm64, and off for all other CPU architectures.
Sponsored by: The FreeBSD Foundation
Hardfloat is now default (use riscv64sf as TARGET_ARCH
for softfloat).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8529
This is added to facilitate experiments building FreeBSD without
copyleft software.
If WITHOUT_GNU_DIFF is set no /usr/bin/diff or /usr/bin/diff3 will
be built.
If WITHOUT_GNU_GREP is set then BSD grep will be installed as
/usr/bin/bsdgrep or /usr/bin/grep, depending on the WITH_BSD_GREP
knob.
Reviewed by: brooks (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: Differential Revision: https://reviews.freebsd.org/D8288
This is currently encoded in conditional blocks in gnu/lib/Makefile and
gnu/usr.bin/Makefile. Set it via src.opts.mk to make GDB's dependency
on binutils more clear.
the same API as the GPL'd version of this library. It implements the common
Linux API for programatically manipulating UEFI environment varibales using
the UEFI Runtime Services the kernel provides. It replaces the old efi
library since it is programmed to a different interface, but retails the
CHAR16 to UTF-8 and vice versa conversion routines. The new name is to match
Linux program's expectations.
Differential Revision: https://reviews.freebsd.org/D8128
Reviewed by: kib@, wblock@, Ganael Laplanche
In FreeBSD 11 ELF Tool Chain's elfcopy is installed as objcopy by
default, with the option to switch back to GNU objcopy by setting
WITHOUT_ELFCOPY_AS_OBJCOPY in make.conf.
We plan to remove the outdated in-tree binutils in FreeBSD 12, so
remove the temporary transition aid.
Reviewed by: brooks, imp
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7337
It also turns off dependencies (bsdinstall, bsdconfig, dpv, tzsetup).
Reviewed by: dteske
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7969
