the IRQ set by the BIOS in existing devices to actually get the correct
bus number of the child PCI bus. I was not reading the bus number from
the bridge device correctly. The __BUS_ACCESSOR() macros (from which
pcib_get_bus() is built) assume that the passed in argument is a child
device. However, at the time I'm reading the bus there is no child
device yet, so I was passing in the pcib device as the child device.
The parent of the pcib device probably returned an error in the case of
a host bridge, thus resulting in random stack garbage for the bus number.
For PCI-PCI bridges, the bus number being used was actually the subvendor
of the PCI-PCI bridge device itself.
MFC after: 1 week
- Don't call tulip_addr_filter() to reset the RX address filter in
tulip_reset() since that gets called before ether_ifattach(). Just
call it in tulip_init_locked().
- Use be16dec() and le16dec() to parse MAC addresses when programming
the RX filter.
- Let ether_ioctl() handle SIOCSIFMTU since we were doing the exact same
thing with the added bonus that we leaked the driver lock if the MTU
was > ETHERMTU in the homerolled version. This part will be MFC'd.
Clue from: wpaul (1)
Stolen from: marcel (2 via patch for dc(4))
MFC after: 1 week
via the DEFAULTS kernel configs. This allows folks to turn it that option
off in the kernel configs if desired without having to hack the source.
This is especially useful since PUC_FASTINTR hangs the kernel boot on my
ultra60 which has two uart(4) devices hung off of a puc(4) device.
I did not enable PUC_FASTINTR by default on powerpc since powerpc does not
currently allow sharing of INTR_FAST with non-INTR_FAST like the other
archs.
'device mem' over from GENERIC to DEFAULTS to be consistent with i386 and
amd64. Additionally, on ia64 enable ACPI by default since ia64 requires
acpi.
event of an error, does the right thing, in terms of setting
the error flags in the buf header. That fixes a crash from
bstrategy().
- Treat ETIMEDOUT as a "recoverable" error, causing the buffer
to be re-dirtied. ETIMEDOUT can occur on soft mounts, when
the number of retries are exceeded, and we don't want data loss
in that case.
Submitted by: Mohan Srinivasan
during boot up. Now we do a full reset of the 8259As and setup a simple
interrupt handler (we actually borrow the apic one that just does an
immediate iret) to handle any spurious interrupts triggered by either chip.
This should fix some folks that were getting a Trap 30 during bootup of
certain SMP AMD systems. This might get pushed into the 6.0 branch as an
errata. For now a suitable workaround is to add 'device atpic' to your
kernel config.
Tested by: scottl
Helpful info from: dillon
MFC after: 1 week
buildkernel: provide a real but dummy name to ${DEPENDFILE}
so that the relevant exists() check in bsd.prog.mk fails and
ensures that ${GENHDRS} are built before any other objects.
MFC after: 3 days
- don't force busdma to pre-allocate bounce pages for parent tag.
- use system supplied roundup2 macro instead of rolling its own version.
- TX/RX decriptor length should be multiple of 128. There is no
no need to expand the size with the multiple of 4096.
- don't create/destroy DMA maps in TX/RX handlers. Use pre-allocated
DMA maps. Since creating DMA maps on sparc64 is time consuming
operations(resource mananger overhead), this change should boost
performance on sparc64. I could get > 2x speedup on Ultra60.
- TX/RX descriptors could be aligned on 128 boundary. Aligning them
on PAGE_SIZE is waste of resource.
- don't blindly create TX DMA tag with size of MCLBYTES * 8. The size
is only valid under jumbo frame environments. Instead of using the
hardcoded value, re-compute necessary size on the fly.
- RX side bus_dmamap_load_mbuf_sg(9) support.
- remove unused macro EM_ROUNDUP and constant EM_MMBA.
Reviewed by: scottl
Tested by: glebius
that enabling busmastering would result in PCR bit ON after codec
reset.
While I'm here add DELAY(1) to codec access routine to give reasonable
time to codec operation. Without the delay, it would cause problems on
super-fast machines(> 2GHz). Also enable legacy audio for all 6300ESB,
82801[D-G]B chips. Previously, it enabled legacy audio for 82801DB(ICH4)
chip only.
Reported by: Maxim Maximov mcsi AT mcsi DOT pp DOT ru
Andrew Bliznak andriko.b AT gmail DOT com
Tested by: brueffer, Maxim Maximov, Andrew Bliznak
for export structure and pass that to vfs_export().
Currently in userland mount(8), an export structure is unconditionally
passed in, only for UFS. This is an attempt to move that UFS-specific
behavior out of mount(8) and into the UFS filesystem code.
Don't allocate potentially large variables on the stack.
Check strsep() return values when the string comes from userland.
Shorten variable names for lucidity's sake.
most of the stuff:
Pointed out by: njl@
use the base time in case the real-time clock is bogus or behind the
base time. Most importantly, don't sanity-check the base time up front
because it may be zero. This is not a preposterous condition. It just
means that none of the file systems have their mount time updated.
MFC after: 1 week
for a Windows ISR is 'BOOLEAN isrfunc(KINTERRUPT *, void *)' meaning
the ISR get a pointer to the interrupt object and a context pointer,
and returns TRUE if the ISR determines the interrupt was really generated
by the associated device, or FALSE if not.
I had mistakenly used 'void isrfunc(void *)' instead. It happens the
only thing this affects is the internal ndis_intr() ISR in subr_ndis.c,
but it should be fixed just in case we ever need to register a real
Windows ISR vi IoConnectInterrupt().
For NDIS miniports that provide a MiniportISR() method, the 'is_our_intr'
value returned by the method serves as the return value from ndis_isr(),
and 'call_isr' is used to decide whether or not to schedule the interrupt
handler via DPC. For drivers that only supply MiniportEnableInterrupt()
and MiniportDisableInterrupt() methods, call_isr is always TRUE and
is_our_intr is always FALSE.
In the end, there should be no functional changes, except that now
ntoskrnl_intr() can terminate early once it finds the ISR that wants
to service the interrupt.
When all file systems have a time stamp of zero, which is the case
for example when the root file system is on a read-only medium, we
ended up not calling inittodr() at all. A potential uncleanliness
existed as well. If multiple file systems had a non-zero time stamp,
we would call inittodr() multiple times. While this should not be
harmful, it's definitely not ideal.
Fix both issues by iterating over the mounted file systems to find
the largest time stamp and call inittodr() exactly once with that
time stamp. This could of course be a zero time stamp if none of the
mounted file systems have a non-zero time stamp. In that case the
annoying errors mentioned in the commit log for revision 1.186 still
haven't been avoided. The bottom line is that inittodr() should not
complain when it gets a time base of zero. At the time of this
commit only alpha seems to have that problem.
Reported by: Dario Freni (saturnero at freesbie dot org)
MFC after: 1 week
is called. It looks like there are lots of different mount flags checked
in vfs_domount(), so we need to do the parsing for these particular
mount flags earlier on. The new flags parsed are:
async, force, multilabel, noasync, noatime, noclusterr, noclusterw,
noexec, nosuid, nosymfollow, snapshot, suiddir, sync, union.
Existing code which uses mount() to mount UFS filesystems is not
affected, but new code which uses nmount() to mount UFS filesystems
should behave better.
Add functions to rename objects and to move a subdisk from one drive
to another.
Obtained from: Chris Jones <chris.jones@ualberta.ca>
Sponsored by: Google Summer of Code 2005
MFC in: 1 week
have any know to enable it from userland and could only be enabled by
either setting it to 1 at compile time or through the kernel debugger.
In the future it may be brought back as KTR tracing points.
Discussed with: rwatson
Sponsored by: TCP/IP Optimization Fundraise 2005
directory by default) without requiring the user to load them by hand using
e.g iwicontrol. Get rid of the old ioctl crud.
Updated iwi-firmware port coming soon.
Obtained from: OpenBSD
synonyms for "shortname" and "longname" mount options. The old
(before nmount()) mount_msdosfs program accepted "shortnames" and "longnames",
but the kernel nmount() checked for "shortname" and "longname".
So, make the kernel accept "shortnames", "longnames", "shortname", "longname"
for forwards and backwarsd compatibility.
Discovered by: Rainer Hurling <rhurlin at gwdg dot de>
include ip_options.h into all files making use of IP Options functions.
From ip_input.c rev 1.306:
ip_dooptions(struct mbuf *m, int pass)
save_rte(m, option, dst)
ip_srcroute(m0)
ip_stripoptions(m, mopt)
From ip_output.c rev 1.249:
ip_insertoptions(m, opt, phlen)
ip_optcopy(ip, jp)
ip_pcbopts(struct inpcb *inp, int optname, struct mbuf *m)
No functional changes in this commit.
Discussed with: rwatson
Sponsored by: TCP/IP Optimization Fundraise 2005
to list corruption, which can be difficult to unravel in a post-mortem
analysis. These checks verify that prev and next pointers are consistent
when inserting or removing elements, thus catching any corruption earlier.
Also use TRASHIT to break LIST and SLIST link pointers on element removal,
from mlaier via -hackers.
Reviewed by: mlaier
Approved by: rwatson (mentor)
mystery traps. If we don't have a message for a given trap, just use
UNKNOWN for the message.
- Add trap messages for T_XMMFLT and T_RESERVED.
MFC after: 1 week
have free space in it. Allocate correct mbuf from the beginning.
This allows icmp_error() to quote the entire TCP header in error
messages.
Sponsored by: TCP/IP Optimization Fundraise 2005
