interrupt arrives in fork_trampoline after sp_el0 was written we may then
switch to a new thread, enter userland so change this stack pointer, then
return to this code with the wrong value. This fixes this case by moving
the load of sp_el0 until after interrupts have been disabled.
Reported by: Mark Millard (markmi@dsl-only.net)
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D9593
we will import a newer version of the Linux code so the linuxkpi was not
used.
This is still missing 10G support, and multicast has not been tested.
Reviewed by: gnn
Obtained from: ABT Systems Ltd
Sponsored by: SoftIron Inc
Differential Revision: https://reviews.freebsd.org/D8549
On arm64 use atomics. Then, both arm and arm64 do not need a critical
section around update. Replace all cpus loop by CPU_FOREACH().
This brings arm and arm64 counter(9) implementation closer to current
amd64, but being more RISC-y, arm* version cannot avoid atomics.
Reported by: Alexandre Martins <alexandre.martins@stormshield.eu>
Reviewed by: andrew
Tested by: Alexandre Martins, andrew
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
The types are for the byte offset and page index in vm object. They
are similar to off_t, which is defined as 64bit MI integer. Using MI
definitions will allow to provide consistent MD values of vm
object-related maximum sizes.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
- em(4) igb(4) and lem(4)
- deprecate the igb device from kernel configurations
- create a symbolic link in /boot/kernel from if_em.ko to if_igb.ko
Devices tested:
- 82574L
- I218-LM
- 82546GB
- 82579LM
- I350
- I217
Please report problems to freebsd-net@freebsd.org
Partial review from jhb and suggestions on how to *not* brick folks who
originally would have lost their igbX device.
Submitted by: mmacy@nextbsd.org
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Limelight Networks and Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8299
virtio_pci was missing from the GENERIC arm64 configuration, while
other virtio devices are present. Adding it will allow us to boot
the GENERIC kernel on QEMU with virtio storage and networking.
In case where GICD_CTLR.DS is 1, the IGROUPR registers are RW in
non-secure state and has to be initialized to 1 for the
corresponding interrupts to be delivered as Group 1 interrupts.
Update gic_v3_dist_init() and gic_v3_redist_init() to initialize
GICD_IGROUPRn and GICR_IGROUPRn respectively to address this. The
registers can be set unconditionally since the writes are ignored
in non-secure state when GICD_CTLR.DS is 0.
This fixes the hang on boot seen when running qemu-system-aarch64
with machine virt,gic-version=3
Changes include modifications in kernel crash dump routines, dumpon(8) and
savecore(8). A new tool called decryptcore(8) was added.
A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump
configuration in the diocskerneldump_arg structure to the kernel.
The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for
backward ABI compatibility.
dumpon(8) generates an one-time random symmetric key and encrypts it using
an RSA public key in capability mode. Currently only AES-256-CBC is supported
but EKCD was designed to implement support for other algorithms in the future.
The public key is chosen using the -k flag. The dumpon rc(8) script can do this
automatically during startup using the dumppubkey rc.conf(5) variable. Once the
keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O
control.
When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random
IV and sets up the key schedule for the specified algorithm. Each time the
kernel tries to write a crash dump to the dump device, the IV is replaced by
a SHA-256 hash of the previous value. This is intended to make a possible
differential cryptanalysis harder since it is possible to write multiple crash
dumps without reboot by repeating the following commands:
# sysctl debug.kdb.enter=1
db> call doadump(0)
db> continue
# savecore
A kernel dump key consists of an algorithm identifier, an IV and an encrypted
symmetric key. The kernel dump key size is included in a kernel dump header.
The size is an unsigned 32-bit integer and it is aligned to a block size.
The header structure has 512 bytes to match the block size so it was required to
make a panic string 4 bytes shorter to add a new field to the header structure.
If the kernel dump key size in the header is nonzero it is assumed that the
kernel dump key is placed after the first header on the dump device and the core
dump is encrypted.
Separate functions were implemented to write the kernel dump header and the
kernel dump key as they need to be unencrypted. The dump_write function encrypts
data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps
are not supported due to the way they are constructed which makes it impossible
to use the CBC mode for encryption. It should be also noted that textdumps don't
contain sensitive data by design as a user decides what information should be
dumped.
savecore(8) writes the kernel dump key to a key.# file if its size in the header
is nonzero. # is the number of the current core dump.
decryptcore(8) decrypts the core dump using a private RSA key and the kernel
dump key. This is performed by a child process in capability mode.
If the decryption was not successful the parent process removes a partially
decrypted core dump.
Description on how to encrypt crash dumps was added to the decryptcore(8),
dumpon(8), rc.conf(5) and savecore(8) manual pages.
EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU.
The feature still has to be tested on arm and arm64 as it wasn't possible to run
FreeBSD due to the problems with QEMU emulation and lack of hardware.
Designed by: def, pjd
Reviewed by: cem, oshogbo, pjd
Partial review: delphij, emaste, jhb, kib
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D4712
don't need the extra debug facilities. Copied from the amd64
configuration of the same name.
Submitted by: Nikolai Lifanov
Reviewed by: emaste
MFC after: 2 weeks
contain a vm_page_t at the specified index. However, with this
change, vm_radix_remove() no longer panics. Instead, it returns NULL
if there is no vm_page_t at the specified index. Otherwise, it
returns the vm_page_t. The motivation for this change is that it
simplifies the use of radix tries in the amd64, arm64, and i386 pmap
implementations. Instead of performing a lookup before every remove,
the pmap can simply perform the remove.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D8708
Table to find the CPUs to find the CPUs to start. Currently we assume PSCI,
however this assumption is shared with the FDT code.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
will be used by the gicv2m and ITS ACPI drivers to only attach to the
correct parent.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Now that BCM283x source are buildable with SMP option it cam be moved to
GENERIC SMP config. SMP itself does not work on RPi3 yet due to lack of
PSCI monitor which is work in progress at the moment
FDT attachment to a new file. A separate ACPI attachment will then be added
to allow arm64 servers with ACPI to use it over FDT.
This should also help with merging this with the ofwpci driver, with
further work needed to remove restrictions this driver places on resource
allocation.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7319
them. Previously this would walk past the end of the array and print
whatever happened to be after the trapframe struct.
MFC after: 1 week
Sponsored by: DARPA, AFRL
these show a 9-10% reduction in user and system time for a buildworld -j48.
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
VFP code to store the old context, with lazy loading of the new context
when needed.
FPU_KERN_NOCTX is missing as this is unused in the crypto code this has
been tested with, and I am unsure on the requirements of the UEFI
Runtime Services.
Reviewed by: kib
Obtained from: ABT Systeems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8276
Policy for FreeBSD/arm64 kernel config is the same one as for x86
architectures: provide GENERIC kernel bootable on as many systems
as possible. Since there is no SMP support for RPi 3 yet new kernel
config was introduced: GENERIC-UP, which is effectively GENERIC with
SMP option disabled
not be sent to userspace, for example the future flag to tell when we are
using floating point in the kernel.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
- Rename SOC_BCM2837 to SOC_BRCM_BCM2837, put it to opt_soc.h
- do not use files.XXX files, just move required sources to
conf/files.arm64 and make them depend on soc_brcm_bcm2837
Suggested by: andrew
