Follow-up to r353959 and r368070: do the same for other architectures.
arm32 already seems to use its own .fnstart/.fnend directives, which
appear to be ARM-specific variants of the same thing. Likewise, MIPS
uses .frame directives.
Reviewed by: arichardson
Differential Revision: https://reviews.freebsd.org/D27387
Some platforms have additional architecture-specific floating-point flags.
Msun test cases lrint and test_fegsetenv (fenv) expects only standard flags,
so make sure to mask them appropriately.
This makes test pass on PowerPC64.
Reviewed by: jhibbits, ngie
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D27202
Fix incorrect mask being used when FE_INVALID bit is wanted by user.
The problem was noticed thanks to msun fenv tests.
Reviewed by: jhibbits, luporl
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D27201
The intel compiler support has badly decayed over the years. Stop
pretending that we support it. Note, I've stopped short of requiring
gcc builtin support with this commit since other compilers may be used
to build non-base software and we need to support those so more
investigation is needed before simplifying further.
by Steve Kargl:
- Use sincos[f] instead of a call to cos[f] and a call to sin[f].
- While here, alphabetize declaration.
Submitted by: sgk at troutmask.apl.washington.edu (Steve Kargl)
- Micro-optimization: use sincosl(x) instead of a call to cosl(x) and
a call to sinl(x). Argument reduction is done once not twice.
- Use a long double constant instead of an invalid double constant.
- Spell scale2 correctly
He could not test ld128, so that patch is untested.
Submitted by: sgk at troutmask.apl.washington.edu (Steve Kargl)
Some of the NetBSD contributed tests are gated behind the
__HAVE_LONG_DOUBLE flag. This flag seems to be defined only for
platforms whose long double is larger than their double. I could not
find this explicitly documented anywhere, but it is implied by the
definitions in NetBSD's sys/arch/${arch}/include/math.h headers, and the
following assertion from the UBSAN code:
#ifdef __HAVE_LONG_DOUBLE
long double LD;
ASSERT(sizeof(LD) > sizeof(uint64_t));
#endif
RISC-V has 128-bit long doubles, so enable the tests on this platform,
and update the comments to better explain the purpose of this flag.
Reviewed by: ngie
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25419
Assume gcc is at least 6.4, the oldest xtoolchain in the ports tree.
Assume clang is at least 6, which was in 11.2-RELEASE. Drop conditions
for older compilers.
Reviewed by: imp (earlier version), emaste, jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24802
These functions first appeared in the First Edition of Unix (or earlier in the
pdp-7 version). Just claim 1st Edition for all this. The pdp-7 code is too
fragmented at this point to extend history that far back.
The "for" loop on big endian was inverting all the bits instead of
just the words
Issue reported by TestSuite (msun lib nan_test case)
Submitted by: Renato Riolino <renato.riolino@eldorado.org.br>
Submitted by: Fernando Valle <fernando.valle@eldorado.org.br>
Reviewed by: pfg, alfredo
Approved by: jhibbits (mentor)
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23926
Once upon a time, sparc64 was the only ld128 architecture. However,
both aarch64 and riscv are now such architectures. Many of the
comments about how slow multiplication was on old sparc64 processors
are now no longer true. However, since no evaluation has been done for
aarch64 yet, it's unclear if they are still relevant or not. If not,
the code should be changed. If so, the comments should remove the
uncertainty.
Reviewed by: emaste@
Differential Revision: https://reviews.freebsd.org/D23658
environ(7) was in AT&T Version 7
ac(8): Add a HISTORY section
sa(8): Add a HISTORY section
sqrt(3): Add the actual sqrt function to the HISTORY section
Obtained from: OpenBSD
Submitted by: gbergling@gmail.com
Approved by: bcr@(mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23693
In r355656, endianness handling of the floating point environment was fixed
in the PowerPC code to work as intended.
However, one bit got missed, causing feholdexcept() to mis-save the fenv.
Submitted by: Renato Riolino <renato.riolino@eldorado.org.br>
Differential Revision: https://reviews.freebsd.org/D23382
Per the University California Regents letter, drop the so-called
"advertisement" clause.
Discussed with: bde, kargl (2017)
Differential Revision: https://reviews.freebsd.org/D22928
Fix multiple problems in the powerpcspe floating point code.
* Endianness handling of the SPEFSCR in fenv.h was completely broken.
* Ensure SPEFSCR synchronization requirements are being met.
The __r.__d -> __r transformations were written by jhibbits.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D22526
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
negative numbers (invoking undefined behavior)
Summary:
Various paths through hypot(x, y) will multiply x and y by a power of
two, perform the calculation in a range where IEEE-754 provides greater
precision, then undo the multiplication to determine the true result.
Undoing that multiplication is implemented as t1*w, where t1=2**k.
2**k is often computed by taking the high word of 1.0, then adding k<<20
(for doubles or long doubles) or k<<23 (for floats) to it, then
overwriting that high word. But when k is negative this left-shifts a
negative value -- and that's undefined behavior in many editions of C
and C++.
This patch should fix all hypot implementations to compute 2**k without
triggering this particular bit of undefined behavior.
Test Plan: I've only very lightly tested out the hypot(double, double)
change, in SpiderMonkey's JavaScript engine, for consistency with prior
behavior. The other functions' changes have more or less only been
eyeballed. Careful examination appreciated! Do note, however, that an
error in any of these changes would most likely produce a value that is
incorrect by a factor of two, so any mistake would most likely be
glaring if invoked.
Submitted by: Jeff Walden <jwalden@mit.edu>
Obtained from: https://github.com/freebsd/freebsd/pull/414
Reviewed by: dim, lwhsu
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22354
Alter bsd.compat.mk to set MACHINE and MACHINE_ARCH when included
directly so MD paths in Makefiles work. In the process centralize
setting them in LIBCOMPATWMAKEENV.
Alter .PATH and CFLAGS settings in work when the Makefile is included.
While here only support LIB32 on supported platforms rather than always
enabling it and requiring users of MK_LIB32 to filter based
TARGET/MACHINE_ARCH.
The net effect of this change is to make Makefile.libcompat only build
compatability libraries.
Changes relative to r354449:
Correct detection of the compiler type when bsd.compat.mk is used
outside Makefile.libcompat. Previously it always matched the clang
case.
Set LDFLAGS including the linker emulation for mips where -m32 seems to
be insufficent.
Reviewed by: imp, kib (origional version in r354449)
Obtained from: CheriBSD (conceptually)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22251
Even though clang comes with a number of internal CUDA wrapper headers,
compiling sample CUDA programs will result in errors similar to:
In file included from <built-in>:1:
In file included from /usr/lib/clang/9.0.0/include/__clang_cuda_runtime_wrapper.h:204:
/usr/home/arr/cuda/var/cuda-repo-10-0-local-10.0.130-410.48/usr/local/cuda-10.0//include/crt/math_functions.hpp:2910:7: error: no matching function for call to '__isnan'
if (__isnan(a)) {
^~~~~~~
/usr/lib/clang/9.0.0/include/__clang_cuda_device_functions.h:460:16: note: candidate function not viable: call to __device__ function from __host__ function
__DEVICE__ int __isnan(double __a) { return __nv_isnand(__a); }
^
CUDA expects __isnan() and __isnanf() declarations to be available,
which are glibc specific extensions, equivalent to the regular isnan()
and isnanf().
To provide these, define __isnan() and __isnanf() as aliases of the
already existing static inline functions __inline_isnan() and
__inline_isnanf() from math.h.
Reported by: arrowd
PR: 241550
MFC after: 1 week
Clang from trunk recently added a warning for when implicit int-to-float
conversions cause a loss of precision. The code in question is designed
to be able to handle that, so add explicit casts to silence this.
Submitted by: James Clarke <jrtc27@jrtc27.com>
Reviewed by: dim
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21913
C/C++) in exp(3), expf(3), expm1(3) and expm1f(3) during intermediate
computations that compute the IEEE-754 bit pattern for |2**k| for
integer |k|.
The implementations of exp(3), expf(3), expm1(3) and expm1f(3) need to
compute IEEE-754 bit patterns for 2**k in certain places. (k is an
integer and 2**k is exactly representable in IEEE-754.)
Currently they do things like 0x3FF0'0000+(k<<20), which is to say they
take the bit pattern representing 1 and then add directly to the
exponent field to get the desired power of two. This is fine when k is
non-negative.
But when k<0 (and certain classes of input trigger this), this
left-shifts a negative number -- an operation with undefined behavior in
C and C++.
The desired semantics can be achieved by instead adding the
possibly-negative k to the IEEE-754 exponent bias to get the desired
exponent field, _then_ shifting that into its proper overall position.
(Note that in case of s_expm1.c and s_expm1f.c, there are SET_HIGH_WORD
and SET_FLOAT_WORD uses further down in each of these files that perform
shift operations involving k, but by these points k's range has been
restricted to 2 < k <= 56, and the shift operations under those
circumstances can't do anything that would be UB.)
Submitted by: Jeff Walden, https://github.com/jswalden
Obtained from: https://github.com/freebsd/freebsd/pull/411
Obtained from: https://github.com/freebsd/freebsd/pull/412
MFC after: 3 days
This unskips:
- lib.libc.stdlib.strtod_test.strtod_round
- lib.msun.fe_round_test.t_nofe_round
In lib/msun/tests/Makefile only define on fe_round_test.c because
lib.msun.ilogb_test.ilogb will get wrong results and needs more examination.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This makes it possible to perform mathematical operations on
fractional values without using floating point. It operates on Q
numbers, which are integer-sized, opaque structures initialized
to hold a chosen number of integer and fractional bits.
For a general description of the Q number system, see the "Fixed Point
Representation & Fractional Math" whitepaper[1]; for the actual
API see the qmath(3) man page.
This is one of dependencies for the upcoming stats(3) framework[2]
that will be applied to the TCP stack in a later commit.
1. https://www.superkits.net/whitepapers/Fixed%20Point%20Representation%20&%20Fractional%20Math.pdf
2. https://reviews.freebsd.org/D20477
Reviewed by: bcr (man pages, earlier version), sef (earlier version)
Discussed with: cem, dteske, imp, lstewart
Sponsored By: Klara Inc, Netflix
Obtained from: Netflix
Differential Revision: https://reviews.freebsd.org/D20116
Ensure the expected result is stored first in a volatile variable with
the desired type. This makes all the tests succeed.
Slightly changed from the original pull request, but functionally the
same.
Obtained from: https://github.com/freebsd/freebsd/pull/401
Submitted by: Moritz Buhl <gh@moritzbuhl.de>
PR: 191676
MFC after: 3 days
Replace calls to sinf(x) and cosf(x) with a single call to sincosf().
Submitted by: Steve Kargl <sgk@troutmask.apl.washington.edu>
Reviewed by: bde
Approved by: grog
MFC after: 3 days
trig_test.reduction test cases to fail, if the fixes from r343916 have
not yet been applied to the base compiler.
Reported by: lwhsu
PR: 234040
Upstream PR: https://bugs.llvm.org/show_bug.cgi?id=40206
MFC after: 1 week
j is int32_t and thus j<<31 is undefined if j==1.
Hinted by: muusl-lib (git 688d3da0f1730daddbc954bbc2d27cc96ceee04c)
Discussed with: freebsd-numerics (kargl)
The long double aliases of double functions are only exposed as aliases if
LDBL_MANT_DIG is 53 (same as DBL_MANT_DIG). Without float.h included these
files were not exposing weak aliases as expected, leading to link failures
if programs use the *l functions. This should fix editors/calligra on
targets with 64-bit long double, which uses erfl and erfcl. Found on
powerpc64.
Reviewed by: kargl@
of NaNs before possible returning a NaN.
The remquo*() and remainder*() functions should now give bitwise identical
results across arches and implementations, and bitwise consistent results
(with lower precisions having truncated mantissas) across precisions. x86
already had consistency across amd64 and i386 and precisions by using the
i387 consistently and normally not using the C versions. Inconsistencies
for C reqmquol() were first detected on sparc64.
Remove double second clearing of the sign bit and extra blank lines.
remainder*(x, y) and remquo*(x, y, quo) were broken for y = 0 by changing
multiplication by y to addition of y. (When y is 0, the result should be
NaN but became 1 for finite x.)
Use a new macro nan_mix_op() to give more control over the mixing, and
expand comments.
Recent re-testing missed finding this bug since I only tested the macro
version on amd64 and i386 and these arches don't use the C versions (they
use either asm versions or builtins).
Reported by: enh via freebsd-numerics
This is a follow-up to r336299.
* lib/msun/Makefile:
. Remove polevll.c
* lib/msun/ld80/e_powl.c:
. Copy contents of polevll.c to here. This is the only consumer of
these functions. Make functions 'static inline'.
. Make reducl a 'static inline' function.
* lib/msun/man/exp.3:
. Remove BUGS section that no longer applies.
* lib/msun/src/math_private.h:
. Remove prototypes of __p1evll() and __polevll()
* lib/msun/src/s_cpow.c:
* lib/msun/src/s_cpowf.c:
* lib/msun/src/s_cpowl.c
. Include math_private.h.
. Use the CMPLX macro from either C99 or math_private.h (depends on
compiler support) instead of the problematic use of complex I.
Submitted by: Steve Kargl <sgk@troutmask.apl.washington.edu>
PR: 229876
MFC after: 1 week
This was open-coded in range reduction for trig and exp functions. Now
there are 3 static inline functions rnint[fl]() that replace open-coded
expressions, and type-generic irint() and i64rint() macros that hide the
complications for efficiently using non-generic irint() and irintl()
functions and casts.
Special details:
ld128/e_rem_pio2l.h needs to use i64rint() since it needs a 46-bit integer
result. Everything else only needs a (less than) 32-bit integer result so
uses irint().
Float and double cases now use float_t and double_t locally instead of
STRICT_ASSIGN() to avoid bugs in extra precision.
On amd64, inline asm is now only used for irint() on long doubles. The SSE
asm for irint() on amd64 only existed because the ifdef tangles made the
correct method of simply casting to int for this case non-obvious.
cc1: warnings being treated as errors
/usr/src/lib/msun/src/s_cpow.c: In function 'cpow':
/usr/src/lib/msun/src/s_cpow.c:63: warning: implicit declaration of function 'CMPLX'
This is a follow-up to r336299.
* lib/msun/Makefile:
. Remove polevll.c
* lib/msun/ld80/e_powl.c:
. Copy contents of polevll.c to here. This is the only consumer of
these functions. Make functions 'static inline'.
. Make reducl a 'static inline' function.
* lib/msun/man/exp.3:
. Remove BUGS section that no longer applies.
* lib/msun/src/math_private.h:
. Remove prototypes of __p1evll() and __polevll()
* lib/msun/src/s_cpow.c:
* lib/msun/src/s_cpowf.c:
* lib/msun/src/s_cpowl.c
. Use the CMPLX macro from either C99 or math_private.h (depends of
compiler support) instead of the problematic use of complex I.
Submitted by: Steve Kargl <sgk@troutmask.apl.washington.edu>
PR: 229876
MFC after: 1 week
with 1 huge component and 1 tiny (but nowhere near denormal) component.
Rescale earlier so that a scale factor of 2 can be combined with a non-
scale divisor of 2, so that the division doesn't shift out a bit. In the
usual case where the scale factor is just 1, the division may shift out a
bit, but then the underflow is not spurious and the inaccuracies are harder
to fix.
