This is similar to taskqueue_drain_all(9) but will wait for the queue
to become idle before returning instead of only waiting for
already-enqueued tasks to finish. This will be used in the opensolaris
compat layer.
PR: 227784
Reviewed by: cem
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17975
We generally document shutdown(8) instead of reboot(8) as it's better for
interactive use.
In modern FreeBSD is matters a lot less, it's mostly just convention. One
minor thing is that shutdown(8) produces a global message, while reboot(8)
does not. It is believed that historically, some versions of reboot did not
do appropriate safe shutdown checks and just rebooted.
It's also just consistency: for example the handbook[1] documents shutdown.
There is actually another important difference between reboot and shutdown
-r now: reboot does not run /etc/rc.shutdown. This is because reboot has
its own shutdown procedure and does not signal init like init 6 and
shutdown -r now do (except in the case of rerooting via reboot -r).
A few years ago jilles@ proposed changing reboot's default to signalling
init (preserving reboot -q which just invokes the reboot system call), but
this was not accepted. Perhaps this can be tried again for 13.0.
[1]: https://www.freebsd.org/doc/handbook/boot-shutdown.html
Reported by: eadler
Reviewed by: eadler, jilles
Approved by: krion (mentor)
Differential Revision: https://reviews.freebsd.org/D16843
The d_off field has been added to the dirent structure recently.
Currently filesystems don't support this feature. Support has been
added and tested for zfs, ufs, ext2fs, fdescfs, msdosfs and unionfs.
A stub implementation is available for cd9660, nandfs, udf and
pseudofs but hasn't been tested.
Motivation for this feature: our usecase is for a userspace nfs server
(nfs-ganesha) with zfs. At the moment we cache direntry offsets by
calling lseek once per entry, with this patch we can get the offset
directly from getdirentries(2) calls which provides a significant
speedup.
Submitted by: Jack Halford <jack@gandi.net>
Reviewed by: mckusick, pfg, rmacklem (previous versions)
Sponsored by: Gandi.net
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D17917
and dependent functions (eg getpwname(3)) get called. This can
improve performance of binaries that perform a lot of name
lookups, such as gssd(8). It also matches documented behaviour
of Linux and Solaris.
The old code is left in place, should anyone need it, guarded
by #ifdef NS_REREAD_CONF.
Reviewed by: imp, bcr
MFC after: 2 weeks
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17934
make buildenv can be used for building for the same architecture as
the host (perhaps this is a degenerate case of cross-building).
TARGET and TARGET_ARCH do not need to be set in this case.
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10759
Add the lb program, which is able to load-balance input traffic
received from a netmap port over M groups, with N netmap pipes in
each group. Each received packet is forwarded to one of the pipes
chosen from each group (using an L3/L4 connection-consistent hash function).
This also adds a man page for lb and some cross-references in related
man pages.
Reviewed by: bcr, 0mp
Approved by: gnn (mentor)
Differential Revision: https://reviews.freebsd.org/D17735
At the moment rc.subr(8) supports the following required_* variables:
required_dirs, required_files, required_modules and required_vars.
This patch documents when every of those required_* variables is actually
processed (before or after running start_precmd).
Reviewed by: bcr
Approved by: krion (mentor, implicit), mat (mentor, implicit)
Sponsored by: Bally Wulff Games & Entertainment GmbH
Differential Revision: https://reviews.freebsd.org/D17895
reordered in transit instead of dropping them altogether.
It uses sequence numbers of PPtPGRE packets.
A set of new sysctl(8) added to control this ability or disable it:
net.graph.pptpgre.reorder_max (1) defines maximum length of node's
private reorder queue used to keep data waiting for late packets.
Zero value disables reordering. Default value 1 allows the node to restore
the order for two packets swapped in transit. Greater values allow the node
to deliver packets being late after more packets in sequence
at cost of increased kernel memory usage.
net.graph.pptpgre.reorder_timeout (1) defines time value in miliseconds
used to wait for late packets. It may be useful to increase this
if reordering spot is distant.
MFC after: 1 month
You should not be using DES. You should not have been using DES for the
past 30 years.
The ed DES-CBC scheme lacked several desirable properties of a sealed
document system, even ignoring DES itself. In particular, it did not
provide the "integrity" cryptographic property (detection of tampering), and
it treated ASCII passwords as 64-bit keys (instead of using a KDF like
scrypt or PBKDF2).
Some general approaches ed(1) users might consider to replace the removed
DES mode:
1. Full disk encryption with something like AES-XTS. This is easy to
conceptualize, design, and implement, and it provides confidentiality for
data at rest. Like CBC, it lacks tampering protection. Examples include
GELI, LUKS, FileVault2.
2. Encrypted overlay ("stackable") filesystems (EncFS, PEFS?, CryptoFS,
others).
3. Native encryption at the filesystem layer. Ext4/F2FS, ZFS, APFS, and
NTFS all have some flavor of this.
4. Storing your files unencrypted. It's not like DES was doing you much
good.
If you have DES-CBC scrambled files produced by ed(1) prior to this change,
you may decrypt them with:
openssl des-cbc -d -iv 0 -K <key in hex> -in <inputfile> -out <plaintext>
Reviewed by: allanjude, bapt, emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D17829
This will enable callers to take const paths as part of syscall
decleration improvements.
Where doing so is easy and non-distruptive carry the const through
implementations. In UFS the value is passed to an interface that must
take non-const values. In ZFS, const poisoning would touch code shared
with upstream and it's not worth adding diffs.
Bump __FreeBSD_version for external API consumers.
Reviewed by: kib (prior version)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17805
Based on the comments in /etc/nsmb.conf.
Reviewed by: bcr
Approved by: krion (mentor, implicit), mat (mentor, implicit)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17810
The description of CMSG_FIRSTHDR used two variables (mhdr and msg) to
reference the same thing. Use msghdr consistency across the manual page
instead.
Reviewed by: bcr
Approved by: krion (mentor, implicit), mat (mentor, implicit)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17804
This adds new keywords to rc/service to enable/disable a service's
rc.conf(5) variable and "delete" to remove the variable.
When the "service_delete_empty" variable in rc.conf(5) is set to "YES"
(default is "NO") an rc.conf.d file (in /etc/ or /usr/local/etc) is
deleted if empty after modification using "service $foo delete".
Submitted by: lme (modified)
Reviewed by: 0mp (previous version), lme, bcr
Relnotes: yes
Sponsored by: Smule, Inc.
Differential Revision: https://reviews.freebsd.org/D17113
Also, link to the homepage of the BSSSD project, which developed the
original driver.
Reviewed by: bcr, kevans
Approved by: krion (mentor, implicit), mat (mentor, implicit)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17608
Remove malloc_domain(9) and most other _domain KPIs added in r327900.
The new functions allow the caller to specify a general NUMA domain
selection policy, rather than specifically requesting an allocation from
a specific domain. The latter policy tends to interact poorly with
M_WAITOK, resulting in situations where a caller is blocked indefinitely
because the specified domain is depleted. Most existing consumers of
the _domain KPIs are converted to instead use a DOMAINSET_PREF() policy,
in which we fall back to other domains to satisfy the allocation
request.
This change also defines a set of DOMAINSET_FIXED() policies, which
only permit allocations from the specified domain.
Discussed with: gallatin, jeff
Reported and tested by: pho (previous version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17418
In the last decade(s) we have seen both short term or long term projects
committed to the tree which were considered or even marked "experimental".
While out-of-tree development has become easier than it used to be in
CVS times, there still is a need to have the code shipping with HEAD but
not enabled by default.
While people may think about VIMAGE as one of the recent larger, long term
projects, early protocol implementations (before they are standardised)
are others. (Free)BSD historically was one of the operating systems
which would have running code at early stages and help develop and
influence standardisation and the industry.
Give developers an opportunity to be more pro-active for early adoption
or running large scale code changes stumbling over each others but not
the user's feet. I have not added the option to NOTES in order to avoid
breaking supported option builds, which require constant compile testing.
Discussed with: people in the corridor
When users mark an interface to not use aliases they likely also don't
want to use the link-local v6 address there.
PR: 201695
Submitted by: Russell Yount <Russell.Yount AT gmail.com>
Differential Revision: https://reviews.freebsd.org/D17633
and runs scripts containing "KEYWORD: resume" with single "resume" argument.
Working example is the port sysutils/cpupdate that defines
extra_commands="resume" to reload CPU microcode cleared
by suspend/resume sequence.
This change does nothing for a system having no scripts with KEYWORD: resume.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D15247
This driver was marked as gone in 12. We're at 13 now. Remove it.
Data from nycbug's dmesg cache shows only one potential user,
suggesting it never was used much. However, even though this device
has been obsolete for 15 years at least, sys/joystick.h is included in
a number of graphics packages still, so that remains. A full exprun
is needed before that can be removed.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D17629
I held the mistaken belief this was completely unused. While the
driver is unused and likely not relevant for a long time,
sys/joystick.h lives on in maybe half a dozen ports, even though
hardware to use it hasn't been widely used in maybe 15 years.
The current deprecated list is: ae, bm, cs, de, dme, ed, ep, ex, fe,
pcn, sf, sn, tl, tx, txp, vx, wb, xe
The list as refined as part of FCP-0101. Per the FCP, devices may be
removed from the deprecation list if enough users are found or they are
converted to iflib.
FCP: https://github.com/freebsd/fcp/blob/master/fcp-0101.md
This provides a chicken switch for anyone negatively impacted by
enabling NUMA in the amd64 GENERIC kernel configuration. With
NUMA disabled at boot-time, information about the NUMA topology
is not exposed to the rest of the kernel, and all of physical
memory is viewed as coming from a single domain.
This method still has some performance overhead relative to disabling
NUMA support at compile time.
PR: 231460
Reviewed by: alc, gallatin, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17439
This driver has been obsolete since the FreeBSD 4.x. It should have
been removed then since the sym(4) driver had subsumed it. The driver
was commented out of GENERIC in 2000.
RelNotes: Yes
stg(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame. It was also only enabled on i386.
Relnote: Yes
nsp(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame. It was also only enabled on i386.
Relnote: Yes
ncv(4) is marked as gone in 12. Remove it. There are no sightings of
it in the nycbug dmesg database. It was for an obscure SCSI card that
sold mostly in Japan, and was especially popilar among pc98 hackers in
the 4.x time frame..
Relnote: Yes
The buslogic scsi driver has been tagged as gone in 12 for some time
now. Remove it. The nycbug dmesg database shows only one sighting in 6
for this driver. It was very popular in the early days of the project,
but that popularity seems to have died by 2004 when the nycbug
database started up.
Relnotes: yes
Remove the advanssy drivers (both adv and adw). They were tagged as
gone in 12 a while qgo. The nycbug dmesg database shows this was last
seen in 6 and there were only a few adv sightings then (none for adw).
Relnotes: yes
aic was marked to be gone in 12 a while ago. Go ahead and remove it.
nycbug's dmesg database shows this was last seen in 6 and one more
time in 4.x. It never was popular, and what popularity it had was over
before the nycbug databse got going in 2004.
Relnotes: yes
We tagged aha as gone in 12 a while ago. Proceed with its removal.
Data from nycbug's database shows the last sighting of this driver in
6, with the prior one in 4.x show its popularity had died prior to
4.x.
Relnotes: yes
Remove mse and all support for bus and inport devices from the tree.
Data from nycbug's dmesg database shows the last sighting of this
driver was in 4.10 on only one machine.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17628
This driver was marked as gone in 12. We're at 13 now. Remove it.
Data from nycbug's dmesg cache shows only one potential user,
suggesting it never was used much.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D17629
* register handler for ingress address appearing/disappearing;
* add new srcaddr hash table for fast softc lookup by srcaddr;
* when srcaddr disappears, clear IFF_DRV_RUNNING flag from interface,
and set it otherwise;
* remove the note about ingress address from BUGS section.
MFC after: 1 month
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17134
The current documentation describing the syntax of a VALE port is wrong.
This patch fixes it to make it consistent.
Approved by: bcr, gnn (mentor)
Differential Revision: https://reviews.freebsd.org/D17411
handler receives the type of event IFADDR_EVENT_ADD/IFADDR_EVENT_DEL,
and the pointer to ifaddr. Also ifaddr_event now is implemented using
ifaddr_event_ext handler.
MFC after: 3 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17100
WITHOUT_LOADER_LUA is only needed since we turned it off by default on
powerpc and sparc64 in r338203. Same with
WITHOUT_LOADER_GEIL. WITH_NVME, WITHOUT_NVME, WITH_LOADER_FORCE_LE
have been needed since they were added.
Currently, the 'thread' command (to switch the debugger to another thread)
only accepts decimal-encoded tids. Use the same parsing logic as 'show
thread <arg>' to accept hex-encoded thread pointers in addition to
decimal-encoded tids.
Document the 'thread' command in ddb.4 and expand the 'show thread'
documentation to cover the tid usage.
Reported by: bwidawsk
Reviewed by: bwidawsk (earlier version), kib (earlier version), markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D16962
Pre-defined policies are useful when integrating the domainset(9)
policy machinery into various kernel memory allocators.
The refactoring will make it easier to add NUMA support for other
architectures.
No functional change intended.
Reviewed by: alc, gallatin, jeff, kib
Tested by: pho (part of a larger patch)
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17416
was really a "socket close" callback.
Update the socket destructor functionality to run when a socket is
destroyed (rather than when it is closed). The original submitter has
confirmed that this change satisfies the intended use case.
Suggested by: rwatson
Submitted by: Michio Honda <micchie at sfc.wide.ad.jp>
Tested by: Michio Honda <micchie at sfc.wide.ad.jp>
Approved by: re (kib)
Differential Revision: https://reviews.freebsd.org/D17590
Since there have been major updates to both drivers in r339338,
refresh the man pages with new and updated information.
Reviewed by: sbruno@, 0mp@, jeffrey.e.pieper@intel.com, manpages
Approved by: re (gjb@, kib@)
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D15927
Provide an example of specifying a common vendor value as the documentation
is not clear enough at the moment.
While here, add 'D:#' to the previous example to eat the remaining
description string.
Also, pet mandoc a bit.
Submitted by: Yuri Pankov <yuripv@yuripv.net>
Reviewed by: cem, imp
Approved by: re (kib), krion (mentor, implicit), mat (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D17321
- Fix "mandoc -Tlint" warnings.
- Use the "Er" macro for errors.
- Add an extra newline for readability.
- Reference m_pullup(9) and m_defrag(9).
- Use the "Fx" macro when talking about FreeBSD versions.
Reviewed by: bcr
Approved by: re (gjb), krion (mentor)
Differential Revision: https://reviews.freebsd.org/D17270
- Switch to using 32b port/link capabilities in the driver. The 32b
format is used internally by firmwares > 1.16.45.0 and the driver will
now interact with the firmware in its native format, whether it's 16b
or 32b. Note that the 16b format doesn't have room for 50G, 200G, or
400G speeds.
- Add a bit in the pause_settings knobs to allow negotiated PAUSE
settings to override manual settings.
- Ensure that manual link settings persist across an administrative
down/up as well as transceiver unplug/replug.
- Remove unused is_*G_port() functions.
Approved by: re@ (gjb@)
MFC after: 1 month
Sponsored by: Chelsio Communications
The new manpage documents the tunables and statistic sysctls exposed by
iflib.
Reviewed by: bcr
Approved by: re (gjb)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16920
Reflect the fact that ig4(4) is not an Intel-specific device but
a driver for Synopsys DesignWare I2C controller that now ships in
AMD systems too.
Approved by: re (kib), rpokala
use of u3g(4) dongles, and in many cases can work out of the box.
Reviewed by: hselasky
Approved by: re (gjb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16974
Document sysctls for the second PWM channel added in r335855
Also fix some minor style issues and a typo.
Approved by: re (gjb)
Submitted by: bobf@mrp3.com
Reviewed by: 0mp
Differential Revision: https://reviews.freebsd.org/D17084