Calls to vop_bypass pass the same argument, but type casted to something else.
Thus by replacing NULL routines with vop_bypass we avoid a runtime check.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D23357
Summary:
This makes the interface described in the definition file act like a
pseudo-IFUNC service, by caching the found method locally.
Applying this to the PowerPC MMU definitions, it yields a significant
(15-20%) performance improvement, seen in both a 'make buildworld' and a
parallel build of LLVM, on a POWER9 system.
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D23245
This makes makesyscalls.lua more parallel-friendly, or at least not as
hostile to the idea. We get into situations where we're running parallel if
we end up with MAKE_JOBS>1 entering any of the sysent targets, since each
output file is recognized a distinct build step that needs to be executed.
Another commit will add some .ORDER to further improve the situation.
Reported by: jhb
Reviewed by: brooks
Differential Revision: https://reviews.freebsd.org/D23098
Most frequently used vops boil down to checking SDT probes, doing the call and
checking again. There is no vop_post/pre in their case but the check after the
call prevents tail call optimisation from taking place. Instead, check once
upfront. Kernels with debug or vops with non-empty vop_post still don't short
circuit.
Reviewed by: kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D22739
These are insignificant as far as declarations go, and we've historically
allowed it. fhlinkat in ^/sys/kern/syscalls.master, for example, currently
has a trailing comma after its final argument that this version of
makesyscalls is ignoring (not by conscious decision).
Fix it for now by actively stripping off trailing whitespace/commas until
we decide to actively prohibit it.
The current version will strip out #include directives appearing inside strings, which is clearly wrong. Improve the processing entirely in the following ways:
- Strip only whole-line comments on every single iteration
- Abort if we see a malformed line that doesn't match the key=value format
- For quoted (backtick or double quote) strings, we'll advance to the end of
the key=value pair and make sure there's not extra stuff left over
- For unquoted key=value pairs, we'll strip any trailing comments and verify
there's no internal whitespace
This has revealed the caveat that key/value pairs can't even include escaped quotes (and haven't been able to). I don't know if this is actually problematic, as we're usually looking at cases like "#include <foo>" or raw identifiers.The current version will strip out #include directives appearing inside strings, which is clearly wrong. Improve the processing entirely in the following ways:
Reviewed and noticed by: brooks
Differential Revision: https://reviews.freebsd.org/D22698
This currently requires a suitable lua + luafilesystem + luaposix from the
ports tree to build. Discussion is underway in D21893 to add a suitable lua
to the base system, cleverly disguised and out of the way of normal
consumers.
makesyscalls.sh is a good target for rewrite into lua as it's currently a
sh+sed+awk script that can be difficult to add on to, at times. For
instance, adding a new COMPAT* option (that mimicks the behaivor of most
other COMPAT* options) requires a fairly substantial amount of copy/paste;
see r352693 for instance. Attempts to generate part of the awk script for
COMPAT* handling was (very kindly) rejected with a desire to just rewrite
the script in a single language that can handle all of it.
Reviewed by: brooks
Differential Revision: https://reviews.freebsd.org/D21775
Multiple tools use @generated to identify generated files (for example,
in a review Phabricator will by default hide diffs in enerated files).
Use the @generated tag in makesyscalls.sh as we've done for other
generated files.
Add a CAM-Newbus SDIO support module. This works provides a newbus
infrastructure for device drivers wanting to use SDIO. On the lower end
while it is connected by newbus to SDHCI, it talks CAM using the MMCCAM
framework to get to it.
This also duplicates the usbdevs framework to equally create sdiodev
header files with #defines for "vendors" and "products".
Submitted by: kibab (initial work, see https://reviews.freebsd.org/D12467)
Reviewed by: kibab, imp (comments on earlier version)
MFC after: 6 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19749
We don't want the generator itself tagged as a generated file.
Reviewed by: cem
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20182
Multiple tools use @generated to identify generated files (for example,
in a review Phabricator will by default hide diffs in generated files).
Use the @generated tag in makeobjops.awk and vnode_if.awk as we've done
for other generated files.
Sponsored by: The FreeBSD Foundation
This fixes building in CheriBSD with a strict tmp path since we don't
bootstrap a cpp but pass the full path to clang-cpp instead.
While touching this file also fix all shellcheck warnings in make_dtb.sh.
Reviewed By: manu
Differential Revision: https://reviews.freebsd.org/D18376
Use bypass to catch any NFS VOP dispatch and route it through the
wrapper which does sigdeferstop() and then dispatches original
VOP. NFS does not need a bypass below it, which is not supported.
The vop offset in the vop_vector is added since otherwise it is
impossible to get vop_op_t from the internal table, and I did not
wanted to create the layered fs only to wrap NFS VOPs.
VFS_OP()s wrap is straightforward.
Requested and reviewed by: mjg (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D17658
DTB Overlays are useful to change/add nodes to a dtb without the need to
modify it.
Add support for building dtbo during buildkernel.
The goal of DTBO present in the FreeBSD source tree is to fill a gap in
time when we submit changes upstream (Linux). Instead of waiting 2 to 4 months
we can add a DTBO in tree in the meantime.
This is not for adding DTBO for capes/hat/addon boards, those will be
better to put in a ports.
This is also not for enabling a i2c/spi/pwm controller on certain pins,
each user have a different use case for those (which pins to use etc ...)
and we cannot have all possible configuration.
Add a dtbo for sun8i-h3-sid which add the SID node missing in upstream dts.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D14782
METHOD and STATICMETHOD declarations; that code will be inserted
into the dispatch function before and after the method call.
Use this functionality and the TSLOG framework to record DEVICE_ATTACH
and DEVICE_PROBE entry/exit timestamps.
The script originally supported embedding an mfs into ELF files or any
other type of file, because it searched for magic strings to mark the
beginning and end of the embeddable section. It was later modified to
read the section offset and length via readelf, which made it work for
ELF only. Restore the ability to update arbitrary file types by using
the readelf technique for ELF, and the magic string technique for all
others (including PE/COFF files like loader.efi).
Submitted by: Zakary Nafziger <worldofzak@gmail.com>
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12746
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Ensure that we are called with two arguments, and that the output file
is writable. Also, if we cannot find the mfs section report the output
file name rather than "kernel", as this script may be used with other
than kernels.
Sponsored by: The FreeBSD Foundation
Add a make.conf DTC variable that control which DTC (Device Tree Compiler)
to use.
Reviewed by: bdrewery, imp
Differential Revision: https://reviews.freebsd.org/D9577
in the PCM feeder mixer. Without this change a value of 32 channels is
treated like zero, due to using a mask of 0x1f, causing a kernel
assert when trying to playback bitperfect 32-channel audio. Also
update the AWK script which is generating the division tables to
handle more than 18 channels. This commit complements r282650.
MFC after: 3 days
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
In-tree objdump is too old to dump new ELF headers. But for example if we
use: `make CROSS_TOOLCHAIN=riscv64-gcc TARGET_ARCH=riscv64` and do not specify
CROSS_BINUTILS_PREFIX in env, embed_mfs.sh cannot find the correct objdump.
This patch just replaces using of objdump with elfdump to collect needed
information.
Later we may also put an ELFDUMP in CROSSENV and use it in embed_mfs.sh .
Reviewed by: emaste, br
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D9062
MD_ROOT_SIZE and embed_mfs.sh were basically retired as part of
https://reviews.freebsd.org/D2903 .
However, when building a kernel with 'options MD_ROOT_SIZE' specified, this
results in a non-working MFS, as within sys/dev/md/md.c we fall within the
wrong # ifdef.
This patch implements the following:
* Allow kernels to be built without the MD_ROOT_SIZE option, which results
in a kernel built as per D2903.
* Allow kernels to be built with the MD_ROOT_SIZE option, which results
in a kernel built similarly to the pre-D2903 way, with the following
differences:
* The MFS is now put in a separate section within the kernel (oldmfs,
so it differs from the mfs section introduced by D2903).
* embed_mfs.sh is changed, so it looks up the oldmfs section within the
kernel, gets its size and offset, sees if the MFS will fit within the
allocated oldmfs section and only if all is well does a dd of the MFS
image into the kernel.
Submitted by: Stanislav Galabov <sgalabov@gmail.com>
Reviewed by: brooks, imp
Differential Revision: https://reviews.freebsd.org/D5093
bug of installing 'realtek' and 'intel_iwn' as files rather then as
a 'LICENSE' file in their directories.
Also add obsolete entries for the older names and names that existed in head
for a period of time.
Suggested by: jmg
X-MFC-With: r289391
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
SDT_PROBE requires 5 parameters whereas SDT_PROBE<n> requires n parameters
where n is typically smaller than 5.
Perhaps SDT_PROBE should be made a private implementation detail.
MFC after: 20 days
kernel config file. If you also want to have a static DTB compiled
into your kernel, however, it cannot be a list. We have no mechanism
in the kernel for picking one, so that doesn't make sense and will
result in a compile-time error.
The NetBSD Foundation states "Third parties are encouraged to change the
license on any files which have a 4-clause license contributed to the
NetBSD Foundation to a 2-clause license."
This change removes clauses 3 and 4 from copyright / license blocks that
list The NetBSD Foundation as the only copyright holder.
Sponsored by: The FreeBSD Foundation
(1) Invoke cpp to bring in files via #include (although the old
/include/ stuff is supported still).
(2) bring in files from either vendor tree or freebsd-custom files
when building.
(3) move all dts* files from sys/boot/fdt/dts to
sys/boot/fdt/dts/${MACHINE} as appropriate.
(4) encode all the magic to do the build in sys/tools/fdt/make_dtb.sh
so that the different places in the tree use the exact same logic.
(5) switch back to gpl dtc by default. the bsdl one in the tree has
significant issues not easily addressed by those unfamiliar with
the code.
In its stead use the Solaris / illumos approach of emulating '-' (dash)
in probe names with '__' (two consecutive underscores).
Reviewed by: markj
MFC after: 3 weeks
option, unbreak the lock tracing release semantic by embedding
calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
version of the releasing functions for mutex, rwlock and sxlock.
Failing to do so skips the lockstat_probe_func invokation for
unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
kernel compiled without lock debugging options, potentially every
consumer must be compiled including opt_kdtrace.h.
Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
is linked there and it is only used as a compile-time stub [0].
[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested. As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while. Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].
Sponsored by: EMC / Isilon storage division
Discussed with: rstone
[0] Reported by: rstone
[1] Discussed with: philip
changes in r246417 were incomplete as they did not add explicit calls to
sigdeferstop() around all the places that previously passed SBDRY to
_sleep(). In addition, nfs_getcacheblk() could trigger a write RPC from
getblk() resulting in sigdeferstop() recursing. Rather than manually
deferring stop signals in specific places, change the VFS_*() and VOP_*()
methods to defer stop signals for filesystems which request this behavior
via a new VFCF_SBDRY flag. Note that this has to be a VFC flag rather than
a MNTK flag so that it works properly with VFS_MOUNT() when the mount is
not yet fully constructed. For now, only the NFS clients are set this new
flag in VFS_SET().
A few other related changes:
- Add an assertion to ensure that TDF_SBDRY doesn't leak to userland.
- When a lookup request uses VOP_READLINK() to follow a symlink, mark
the request as being on behalf of the thread performing the lookup
(cnp_thread) rather than using a NULL thread pointer. This causes
NFS to properly handle signals during this VOP on an interruptible
mount.
PR: kern/176179
Reported by: Russell Cattelan (sigdeferstop() recursion)
Reviewed by: kib
MFC after: 1 month
- Use this new format to automatically handle syscalls and VOPs. This
changes the earlier format but is still human readable.
Sponsored by: EMC / Isilon Storage Division
