Commit Graph

20 Commits

Author SHA1 Message Date
bdrewery
1e1f5317b7 WITH_SYSTEM_COMPILER: Avoid using GCC4.8+ logic on native GCC4.2 platforms.
As the XXX notes, these should really be checking MK_GNUCXX since there is
already a version check in share/mk/src.opts.mk to disable it.  Fixing that
here is more complex though.  This could also be using X_COMPILER_FEATURES
but uses X_COMPILER_VERSION to keep in sync with the src.opts.mk logic.

Tested by:	andreast
Sponsored by:	EMC / Isilon Storage Division
Approved by:	re (gjb)
2016-06-29 01:50:30 +00:00
bdrewery
42d9d45fb8 Fix native powerpc64 build of lib32 with in-tree GCC.
- This was broken by r300350 and r300885.
- Add some comments around the external GCC logic since it is spread out
  and in need of some cleanup.
- The problem was that X_COMPILER_TYPE is always defined from CC->XCC's
  default, so if /usr/bin/cc is GCC (as it is on native powerpc64) then
  X_COMPILER_TYPE was getting GCC and triggering the external logic in
  Makefile.libcompat.  It was intended to always provide -isystem with
  GCC since --sysroot is used into the lib32 sysroot which won't modify
  the header path without the -isystem.  The use of the libc++/std=c++11
  override was only intended to be used for external compilers though
  (more accurately GCC 4.8+ but that's a separate assumption to
  cleanup).  Apply the same logic from Makefile.inc1 to Makefile.libcompat
  to only add the libc++ override when needed for external compilers.

Pointyhat to:	bdrewery
Tested with:	native ppc64 (swills), universe, ppc64 xtoolchain,
		amd64 xtoolchain, sparc64 cross-build of ppc64 (host GCC 4.2)
Reported by:	andreast, swills
Approved by:	re (gjb)
Sponsored by:	EMC / Isilon Storage Division
2016-06-15 23:58:03 +00:00
emaste
c2a2f8cf8b Use -L to specify compat32 library paths instead of -Y
-Y is an uncommon linker option that is rather similar to -L.  In
discussion with Peter it seems early amd64 development might have
required the -Y-specific behaviour, but it is no longer necessary.

Switch to -L which is more widely supported and much more commonly
used, to make it easier to link the FreeBSD base system with linkers
other than ld.bfd.

Submitted by:	Rafael Ávila de Espíndola
Differential Revision:	https://reviews.freebsd.org/D6681
2016-06-09 17:03:03 +00:00
bdrewery
dd3acf34f8 Libcompat: Swap CXX/CFLAGS.
This is the same as done for the native build in r300770 to ensure that
the libc++ build reads from SYSROOT/usr/include/c++/v1 before reading
from SYSROOT/usr/include.
2016-05-29 06:20:36 +00:00
bdrewery
b8787754e0 GCC External: Revert r300886, r300904, r300917, r300918
The fix in r300873 is mostly enough.  A fix for lib32 will be
committed.separately.
2016-05-29 06:20:15 +00:00
bdrewery
dd479c1b47 Libcompat: Set build tools in environment rather than make overrides.
This allows the CXX hack in r300917 for external GCC to work for
the lib32 build.  It is also the same pattern as the native
build uses by adding the tools into CROSSENV for external
toolchain, rather than make overrides.

Sponsored by:	EMC / Isilon Storage Division
2016-05-29 01:45:15 +00:00
bdrewery
288155afbb Move external GCC compiler hacks to bsd.sys.mk.
This allows respecting -nostdinc, -nostdinc++ and -nostdlib before
making the decision to add in -isystem, etc.  The -isystem flags
are problematic for building lib/libc++ and lib/libcxxrt which wants
to only use its own headers.

More information the need of these flags can be found at
https://gcc.gnu.org/ml/gcc/2016-03/msg00219.html

This also reverts r300873.

Sponsored by:	EMC / Isilon Storage Division
2016-05-27 23:03:44 +00:00
bdrewery
b945f26dce Libcompat: Only pass -isystem =/usr/include for external GCC.
This is the same as the main build logic.  GCC with a cross-compiler
requires using -isystem to =/usr/include to get the search order
correct.

Reported by:	dim, asomers
Sponsored by:	EMC / Isilon Storage Division
2016-05-27 23:03:28 +00:00
bdrewery
9cba3fc611 Set CPP from XCPP for the libcompat build.
Submitted by:	Mark Millard <markmi@dsl-only.net>
2016-04-15 18:32:05 +00:00
bdrewery
b40d5fe0a7 META_MODE: Don't rebuild build-tools targets during normal build.
This avoids 'build command changed' due to CFLAGS/CC changes during the
normal build.  Without this the build-tools targets end up rebuilding
for the *target* rather than keeping the native versions built in
build-tools.

Sponsored by:	EMC / Isilon Storage Division
2016-04-14 21:06:10 +00:00
bdrewery
5a410d3625 Remove leftover _LDSCRIPTROOT missed in r297270.
Sponsored by:	EMC / Isilon Storage Division
2016-04-05 21:12:03 +00:00
bdrewery
814a0c259a LIB32+WITHOUT_TOOLCHAIN: Fix build by staging includes.
This is the same fix as r297281 for the normal build.

Sponsored by:	EMC / Isilon Storage Division
2016-03-31 17:27:14 +00:00
bdrewery
59f4cb814d Remove the old depend (mkdep) code and make FAST_DEPEND the one true way.
Reviewed by:	emaste, hselasky (partial), brooks (brief)
Discussed on:	arch@
Sponsored by:	EMC / Isilon Storage Division
Differential Revision:	https://reviews.freebsd.org/D5742
2016-03-30 23:50:23 +00:00
bdrewery
3f7a33e669 Fix libcompat not handling some external toolchain flags.
- Use libc++ with GCC.
- Use CROSS_BINUTILS_PREFIX with -B (r280980 addressed this mostly already)

Sponsored by:	EMC / Isilon Storage Division
2016-03-25 19:12:44 +00:00
bdrewery
64d40c9f8c Build libcompat (lib32) with a --sysroot pointing into its stage directory.
This overrides the cross-compiler's default sysroot to use the WORLD32's
sysroot for building the lib32 libraries.  Previously the cross-compiler
would default the sysroot to the 64bit WORLDTMP and -B/-L/-isystem flags
were used to build using the lib32 files.  This leads to multiple issues
discussed later.  Some extra headers are now needed to be staged since the
64bit WORLDTMP is not referenced at all for headers.  The 64bit WORLDTMP
is still used via PATH for build tools.  Overriding the default
target/arch is retained in the CC/CXX overrides.

This allows reverting the LDSCRIPT rewriting in installworld from r296921 and
r235122, thus allowing read-only objdirs to work for installing again.

This removes the need for _LDSCRIPTROOT.

This allows progressing the change to always use --sysroot for the build
rather than only relying on the cross-compiler's default sysroot.  The
work for that is in D3970 and needed to resolve WITHOUT_CROSS_COMPILER
not using a --sysroot [1].

PR:		196193 [1]
Sponsored by:	EMC / Isilon Storage Division
2016-03-25 19:12:38 +00:00
bdrewery
54f229f3df LIBRARIES_ONLY should only be defined during install32.
r245561 added it to prevent extra files from being installed during
the install32 phase (to prevent duplicates in the meta log with -DNO_ROOT).
The flag should not be passed during build32 though since it may
prevent staging of includes during the 'make includes' phase on
library directories.

Sponsored by:	EMC / Isilon Storage Division
2016-03-25 19:12:13 +00:00
bdrewery
fe2e6f1064 Explicit 'make obj' for library dirs in build32 is not needed.
In r138291 some directories were explicitly made to run 'make obj',
but each target in 'make libraries' already runs 'make obj' for
each library since r161580.

Sponsored by:	EMC / Isilon Storage Division
2016-03-24 21:48:01 +00:00
imp
4e2d26ce1b Use the newly minted Makefile.libcompat to implement libsoft libraries
for the armv6 ABI switch. This also make WITH_LIBSOFT functional on
the arm platform. As a transition thing, this seems to work even
without switching the ABI (we basically build the same libraries
twice when MK_LIBSOFT=yes until the ABI cut over next
month). MK_LIBSOFT remains default no.
2016-03-12 23:25:05 +00:00
bdrewery
1fb02e9971 Follow-up r296709: Fix build32 not properly building all libraries.
Pointyhat to:	bdrewery
Reported by:	antoine
2016-03-12 18:41:27 +00:00
bdrewery
e362e0e49e Move Makefile.lib32 to Makefile.libcompat and generalize it.
This is in preparation for LIBSOFT.

This file only supports *1* LIBCOMPAT value currently and must be capitalized.
In Makefile.libcompat given LIBCOMPAT=FOO there can be values set for
LIBFOOCFLAGS, LIBFOOCPUFLAGS, LIBFOOWMAKEENV, LIBFOOWMAKEFLAGS, LIBFOOCPUFLAGS,
and LIBFOODTRACE.  These will have the standard cross-build values appended
onto them.

This could be extended to support multiple libcompat libraries in the future
once there is a need.

Reviewed by:	imp
Sponsored by:	EMC / Isilon Storage Division
Differential Revision:	https://reviews.freebsd.org/D5612
2016-03-11 23:56:33 +00:00