After r364166 and r364174, crunchgen needs a pwd binary in $PATH instead
of using a hardcoded absolute path. This commit is needed for
BUILD_WITH_STRICT_TMPPATH builds (currently not on by default).
libifconfig_sfp.h provides an API in libifconfig for querying SFP module
properties, operational status, and vendor strings, as well as descriptions
of the various fields, string conversions, and other useful helpers for
implementing user interfaces.
SFP module status is obtained by reading registers via an I2C interface.
Descriptions of these registers and the values therein have been collected
in a Lua table which is used to generate all the boilerplace C headers and
source files for accessing these values, their names, and descriptions.
The generated code is fully commented and readable.
This is the first use of libifconfig in ifconfig itself. For now, the
scope remains very limited. Over time, more of ifconfig will be replaced
with libifconfig.
Some minor changes to the formatting of ifconfig output have been made:
- Module memory hex dumps are indented one extra space as a result of using
hexdump(3) instead of a bespoke hex dump function.
- Media descriptions have an added two-character short-name in parenthesis.
- QSFP modules were incorrectly displaying TX bias current as power. Now
TX channels display bias current, and this change has been made for both
SFP and QSFP modules for consistency.
A Lua binding for libifconfig including this functionality is implemented
but has not been included in this commit. The plan is for it to be
committed after dynamic module loading has been enabled in flua.
Reviewed by: kp, melifaro
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25494
make copies instead.
There's too many times that we can't run the new binaries with old
libraries. Making the links when things are known to be 'safe' is a
nice optimization, but a copy of all the binaries is only 30MB, so
saving the copies at the cost of increased support when new symbols
are added and used as part of the bootstrap seems to be unwise.
There may be additional optimizations possible here, especially for
!FreeBSD hosts. However, that's beyond the scope of the problem I'm
trying to fix with make failing mid-way through an installworld across
change r363679. This optimization there caused us to run a new binary
with an old library once a new make was installed due to the symbolic
link. One could just copy make, but then other binaries fail as well,
so rather than play whack-a-mole, I opted to take us back to the old
way. Before r340157 or so we did copies (thogh of a lot fewer
artifacts), and we didn't have issues like this.
Reviewed by: arichards@
Differential Revision: https://reviews.freebsd.org/D25967
llvmorg-10.0.1-rc2-0-g77d76b71d7d.
Also add a few more llvm utilities under WITH_CLANG_EXTRAS:
* llvm-dwp, a utility for merging DWARF 5 Split DWARF .dwo files into
.dwp (DWARF package files)
* llvm-size, a size(1) replacement
* llvm-strings, a strings(1) replacement
MFC after: 3 weeks
* bugpoint.1
* clang.1
* llc.1
* lldb.1
* lli.1
* llvm-ar.1
* llvm-as.1
* llvm-bcanalyzer.1
* llvm-cov.1
* llvm-diff.1
* llvm-dis.1
* llvm-dwarfdump.1
* llvm-extract.1
* llvm-link.1
* llvm-mca.1
* llvm-nm.1
* llvm-pdbutil.1
* llvm-profdata.1
* llvm-symbolizer.1
* llvm-tblgen.1
* opt.1
Add newly generated manpages for:
* llvm-addr2line.1 (this is an alias of llvm-symbolizer)
* llvm-cxxfilt.1
* llvm-objcopy.1
* llvm-ranlib.1 (this is an alias of llvm-ar)
Note that llvm-objdump.1 is an exception, as upstream has both a plain
.1 file, and a .rst variant. These will have to be reconciled upstream
first.
MFC after: 3 days
clang-format is enabled conditional on either WITH_CLANG_EXTRAS or
WITH_CLANG_FORMAT. Some sources in libclang are build conditional on
either rule, and obviously the clang-format binary itself depends on the
rule.
clang-format could still use a manual page.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D25427
libucl comes with a Lua library binding. Build it into flua.
This lets us parse/generate config files in the various formats supported by
libucl with flua. For example, the following script will detect the format of
an object written to stdin as one of UCL config, JSON, or YAML and write it to
stdout as pretty-printed JSON:
local ucl = require('ucl')
local parser = ucl.parser()
parser:parse_string(io.read('*a'))
local obj = parser:get_object()
print(ucl.to_format(obj, 'json'))
Reviewed by: kevans, pstef
Approved by: mmacy (mentor)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25009
Prepare support to be able to handle font data in loader, consolidate
data structures to sys/font.h and update vtfontcvt.
vtfontcvt update is about to output set of glyphs in form of C source,
the implementation does allow to output compressed or uncompressed font
bitmaps.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D24189
This is useful for tracking hardware provided AMSDU frames to see
when we're (a) seeing them, and (b) seeing the split between
intermediary and final frames.
Tested:
* QCA9880 (athp) - AP mode
As of r361857 all BINUTILS options are disabled by default - ports
have been changed to depend on binutils if they require GNU as, and
all base system assembly files have been switched to use Clang's
integrated assembler.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
The ice(4) driver is the driver for the Intel E8xx series Ethernet
controllers; currently with codenames Columbiaville and
Columbia Park.
These new controllers support 100G speeds, as well as introducing
more queues, better virtualization support, and more offload
capabilities. Future work will enable virtual functions (like
in ixl(4)) and the other functionality outlined above.
For full functionality, the kernel should be compiled with
"device ice_ddp" like in the amd64 NOTES file, and/or
ice_ddp_load="YES" should be added to /boot/loader.conf so that
the DDP package file included in this commit can be downloaded
to the adapter. Otherwise, the adapter will fall back to a single
queue mode with limited functionality.
A man page for this driver will be forthcoming.
MFC after: 1 month
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21959
- When -z is used, include small buffers from 1 to 32 bytes to test
stream ciphers. Note that while AES-XTS claims to support a block
size of 1 in OpenSSL, it does require a minimum of 1 block of cipher
text as it is not a stream cipher but depends on CTS to pad out the
final partial block.
- Permit multiple AAD sizes to be set via multiple -A options, or via
-z. When -z is set, use small buffers from 0 to 32 bytes followed
by powers of 2 up to 256. When multiple sizes are specified, the
ETA and AEAD algorithms perform the full matrix of AAD sizes by
payload sizes.
- Only warn on unchanged ciphertext instead of erroring. The
currently generated plaintext and key for a couple of AES-CTR tests
with a buffer size of 1 results in ciphertext that matches the
plaintext.
Reviewed by: cem
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D25006
This reapplies logical r360944 and r360946 (reverting r360955), with fixed
copystr() stand-in replacement macro. Eventually the goal is to convert
consumers and kill the macro, but for a first step it helps if the macro is
correct.
Prior commit message:
Unlike the other copy*() functions, it does not serve to copy from one
address space to another or protect against potential faults. It's just
an older incarnation of the now-more-common strlcpy().
Add a coccinelle script to tools/ which can be used to mechanically
convert existing instances where replacement with strlcpy is trivial.
In the two cases which matched, fuse_vfsops.c and union_vfsops.c, the
code was further refactored manually to simplify.
Replace the declaration of copystr() in systm.h with a small macro
wrapper around strlcpy (with correction from brooks@ -- thanks).
Remove N redundant MI implementations of copystr. For MIPS, this
entailed inlining the assembler copystr into the only consumer,
copyinstr, and making the latter a leaf function.
Reviewed by: jhb (earlier version)
Discussed with: brooks (thanks!)
Differential Revision: https://reviews.freebsd.org/D24672
The CU-SeeMe videoconferencing client and associated protocol is at this
point a historical artifact; there is no need to retain support for this
protocol today.
Reviewed by: philip, markj, allanjude
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24790
This is in preparation for me bumping how many size buckets are used
for ath_rate_sample statistics.
* Bump buffer size to 64k
* Don't waste 4 lines per bucket size, condense it to two
* Alternate colours; my logic made everything after the first two just
be black. Oops.
Unlike the other copy*() functions, it does not serve to copy from one
address space to another or protect against potential faults. It's just
an older incarnation of the now-more-common strlcpy().
Add a coccinelle script to tools/ which can be used to mechanically
convert existing instances where replacement with strlcpy is trivial.
In the two cases which matched, fuse_vfsops.c and union_vfsops.c, the
code was further refactored manually to simplify.
Replace the declaration of copystr() in systm.h with a small macro
wrapper around strlcpy.
Remove N redundant MI implementations of copystr. For MIPS, this
entailed inlining the assembler copystr into the only consumer,
copyinstr, and making the latter a leaf function.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D24672
`metalog.lua` is a script that reads METALOG file created by pkgbase
(make packages) and generates reports about the installed system
and issues.
This was developed as part of Yang's W2020 University of Waterloo co-
operative education term with the FreeBSD Foundation. kevans provided
some initial review; we will iterate on it in the tree.
Submitted by: Yang Wang <2333@outlook.jp>
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24563
Save and restore (also known as suspend and resume) permits a snapshot
to be taken of a guest's state that can later be resumed. In the
current implementation, bhyve(8) creates a UNIX domain socket that is
used by bhyvectl(8) to send a request to save a snapshot (and
optionally exit after the snapshot has been taken). A snapshot
currently consists of two files: the first holds a copy of guest RAM,
and the second file holds other guest state such as vCPU register
values and device model state.
To resume a guest, bhyve(8) must be started with a matching pair of
command line arguments to instantiate the same set of device models as
well as a pointer to the saved snapshot.
While the current implementation is useful for several uses cases, it
has a few limitations. The file format for saving the guest state is
tied to the ABI of internal bhyve structures and is not
self-describing (in that it does not communicate the set of device
models present in the system). In addition, the state saved for some
device models closely matches the internal data structures which might
prove a challenge for compatibility of snapshot files across a range
of bhyve versions. The file format also does not currently support
versioning of individual chunks of state. As a result, the current
file format is not a fixed binary format and future revisions to save
and restore will break binary compatiblity of snapshot files. The
goal is to move to a more flexible format that adds versioning,
etc. and at that point to commit to providing a reasonable level of
compatibility. As a result, the current implementation is not enabled
by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option
for userland builds, and the kernel option BHYVE_SHAPSHOT.
Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai
Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz
Relnotes: yes
Sponsored by: University Politehnica of Bucharest
Sponsored by: Matthew Grooms (student scholarships)
Sponsored by: iXsystems
Differential Revision: https://reviews.freebsd.org/D19495
directory.
Add a quick sanity check to objdir before using it. It must start
with /. If there was a make error getting it, report that and continue
with the next target. If there was anything else, bail out.
This option was added as a transition aide when symbol versioning was
first added. It was enabled by default in 2007 and is supported even
by the old GPLv2 binutils. Trying to disable it currently fails to
build in libc and at this point it isn't worth fixing the build.
Reported by: Michael Dexter
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24637
instead of MK_KERBEROS. The reason for this change is some users
prefer to build FreeBSD WITHOUT_KERBEROS, wanting to retain the
Kerberos rc scripts to start/stop MIT Kerberos or Heimdal from ports.
PR: 197337
Reported by: Adam McDougall <ebay at looksharp.net>
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D24252
Include a temporarily compatibility shim as well for kernels predating
close_range, since closefrom is used in some critical areas.
Reviewed by: markj (previous version), kib
Differential Revision: https://reviews.freebsd.org/D24399
r359461 introduced this nifty script to centralize these things, so add
shm_open.c there to remove a total of one (1) bad example from
Makefile.inc1.
Looked over by: emaste
For head/, this will remain eternally default-on to maintain the status quo.
For stable/ branches, it should be flipped to default-off to maintain the
status quo.
There's value in being able to flip it one way or the other easily on head
or stable branches, whether you want to gain some performance back on head/
(for machines there's little chance you'll actually hit an assertion) or
potentially diagnose a problem with the version of llvm on an older branch.
Currently, stable branches get the CFLAGS+= -ndebug line uncommented; going
forward, they will instead have the default of LLVM_ASSERTIONS flipped.
Reviewed by: dim, emaste, re (gjb)
MFC after: 1 week
MFC note: flip the default of LLVM_ASSERTIONS
Differential Revision: https://reviews.freebsd.org/D24264
