Commit Graph

302 Commits

Author SHA1 Message Date
jhb
b325e18899 "Sir, the deorbit burn completed succesfully."
RIP {sys/machine}/ipl.h.
2001-05-15 23:30:37 +00:00
joerg
b9d6a2b68d Implement a few more floppy ioctl commands and IO options, namely:
. FD_CLRERR clears the error counter, thus re-enables kernel error
  printf()s,

. FD_GSTAT obtains the last FDC operation state, if any,

. FDOPT_NOERRLOG (temporarily) turns off kernel printf() floppy
  error logging,

. FDOPT_NOERROR makes the kernel ignore an FDC error, thus can
  enable the transfer of an erroneous sector to the user application

All options are being cleared on (last) close.

Prime consumer of the last features will be fdread(1), to be committed
shortly.

(FD_CLRERR should be wired into fdcontrol(8), but then fdcontrol(8)
needs a major rewrite anyway.)
2001-05-14 20:20:11 +00:00
jhb
8bfdafc934 Overhaul of the SMP code. Several portions of the SMP kernel support have
been made machine independent and various other adjustments have been made
to support Alpha SMP.

- It splits the per-process portions of hardclock() and statclock() off
  into hardclock_process() and statclock_process() respectively.  hardclock()
  and statclock() call the *_process() functions for the current process so
  that UP systems will run as before.  For SMP systems, it is simply necessary
  to ensure that all other processors execute the *_process() functions when the
  main clock functions are triggered on one CPU by an interrupt.  For the alpha
  4100, clock interrupts are delievered in a staggered broadcast fashion, so
  we simply call hardclock/statclock on the boot CPU and call the *_process()
  functions on the secondaries.  For x86, we call statclock and hardclock as
  usual and then call forward_hardclock/statclock in the MD code to send an IPI
  to cause the AP's to execute forwared_hardclock/statclock which then call the
  *_process() functions.
- forward_signal() and forward_roundrobin() have been reworked to be MI and to
  involve less hackery.  Now the cpu doing the forward sets any flags, etc. and
  sends a very simple IPI_AST to the other cpu(s).  AST IPIs now just basically
  return so that they can execute ast() and don't bother with setting the
  astpending or needresched flags themselves.  This also removes the loop in
  forward_signal() as sched_lock closes the race condition that the loop worked
  around.
- need_resched(), resched_wanted() and clear_resched() have been changed to take
  a process to act on rather than assuming curproc so that they can be used to
  implement forward_roundrobin() as described above.
- Various other SMP variables have been moved to a MI subr_smp.c and a new
  header sys/smp.h declares MI SMP variables and API's.   The IPI API's from
  machine/ipl.h have moved to machine/smp.h which is included by sys/smp.h.
- The globaldata_register() and globaldata_find() functions as well as the
  SLIST of globaldata structures has become MI and moved into subr_smp.c.
  Also, the globaldata list is only available if SMP support is compiled in.

Reviewed by:	jake, peter
Looked over by:	eivind
2001-04-27 19:28:25 +00:00
obrien
b65aa4182e Fix SCM ID's and remove tailing blanks. 2001-04-25 20:40:57 +00:00
jhb
7f17e1a5d9 Add a new field 'md_kernnest' to the alpha machine dependent process
structure.  This field keeps track of how many levels deep we are nested
into the kernel.  The nesting level is bumped at the start of a trap,
interrupt, syscall, or exception and is decremented on return.  This is
used to detect the case when the kernel is returning back to a kernel
context in exception_return().  If we are returning to the kernel we need
to update the globaldata pointer register saved in the stack frame in case
we have switched CPU's between taking the initial interrupt that saved the
frame and returning.  If we don't do this fixup it is possible for a CPU to
use the wrong per-cpu data.  On UP systems this is not a problem, so the
code is conditional on SMP.

A count was used instead of simply checking the process status register in
the frame during exception_return() since there are critical sections at
the very start and end of a trap, exception, or interrupt from userland in
which we could trash the t7 register being used in userland.  The counter
is incremented after adn before these critical sections respectively so
that we will not overwrite the saved t7 register if we are interrupted
during one of these critical sections.
2001-04-24 21:06:53 +00:00
gallatin
d237fa1cf5 Block out all interrupts, even machine checks, for critical_enter()
This is will be required to prevent lowering the ipl when a critical_enter()
is present in the interrupt path when handling a machine check.

reviewed by: jhb
2001-04-21 21:44:39 +00:00
jhb
a222601bea Convert the protection of hte i8254 from critical_enter/exit like it is
on the x86.
2001-04-18 21:47:48 +00:00
jhb
3a52576aa4 - Add appropriate #ifndef/#define/#endif to protect against multiple
inclusions.
- Blow away all evidence of a static curpcb as curpcb is a per-CPU variable
  and this definition is now bogus.
2001-04-17 02:51:28 +00:00
jhb
f8ca9d2d20 - Fix memory barriers in atomic operations so that the barriers are always
"inside" of locked regions.  That is, an acquire atomic operation will
  always enforce a memory barrier after the atomic operation and a release
  operation will always enforce a memory barrier before the atomic
  operation.
- Explicitly use 'mb' instead of 'wmb' in release atomic operations.  The
  'wmb' memory barrier is not strong enough to guarantee coherence with
  other processors.  This is effectively a nop since alpha_wmb() actually
  performs a 'mb' and not a 'wmb', but I wanted the code to be more
  correct since at some point in the future alpha_wmb()'s implementation
  may switch to being a real 'wmb'.
2001-04-17 02:50:05 +00:00
jhb
4dd39ab878 Rename the IPI API from smp_ipi_* to ipi_* since the smp_ prefix is just
"redundant noise" and to match the IPI constant namespace (IPI_*).

Requested by:	bde
2001-04-11 17:06:02 +00:00
gallatin
52dacf6017 Recognize a few newer cpus (pca57, ev67 & ev68) and update systypes to
include "CUSCO" and "Eiger" while I'm at it.
2001-03-30 22:04:08 +00:00
jhb
0c490fd02e Rework the witness code to work with sx locks as well as mutexes.
- Introduce lock classes and lock objects.  Each lock class specifies a
  name and set of flags (or properties) shared by all locks of a given
  type.  Currently there are three lock classes: spin mutexes, sleep
  mutexes, and sx locks.  A lock object specifies properties of an
  additional lock along with a lock name and all of the extra stuff needed
  to make witness work with a given lock.  This abstract lock stuff is
  defined in sys/lock.h.  The lockmgr constants, types, and prototypes have
  been moved to sys/lockmgr.h.  For temporary backwards compatability,
  sys/lock.h includes sys/lockmgr.h.
- Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin
  locks held.  By making this per-cpu, we do not have to jump through
  magic hoops to deal with sched_lock changing ownership during context
  switches.
- Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with
  proc->p_sleeplocks, which is a list of held sleep locks including sleep
  mutexes and sx locks.
- Add helper macros for logging lock events via the KTR_LOCK KTR logging
  level so that the log messages are consistent.
- Add some new flags that can be passed to mtx_init():
  - MTX_NOWITNESS - specifies that this lock should be ignored by witness.
    This is used for the mutex that blocks a sx lock for example.
  - MTX_QUIET - this is not new, but you can pass this to mtx_init() now
    and no events will be logged for this lock, so that one doesn't have
    to change all the individual mtx_lock/unlock() operations.
- All lock objects maintain an initialized flag.  Use this flag to export
  a mtx_initialized() macro that can be safely called from drivers.  Also,
  we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness
  performs the corresponding checks using the initialized flag.
- The lock order reversal messages have been improved to output slightly
  more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
jhb
4572ff9c78 - Switch from using save/disable/restore_intr to using critical_enter/exit
and change the u_int mtx_saveintr member of struct mtx to a critical_t
  mtx_savecrit.
- On the alpha we no longer need a custom _get_spin_lock() macro to avoid
  an extra PAL call, so remove it.
- Partially fix using mutexes with WITNESS in modules.  Change all the
  _mtx_{un,}lock_{spin,}_flags() macros to accept explicit file and line
  parameters and rename them to use a prefix of two underscores.  Inside
  of kern_mutex.c, generate wrapper functions for
  _mtx_{un,}lock_{spin,}_flags() (only using a prefix of one underscore)
  that are called from modules.  The macros mtx_{un,}lock_{spin,}_flags()
  are mapped to the __mtx_* macros inside of the kernel to inline the
  usual case of mutex operations and map to the internal _mtx_* functions
  in the module case so that modules will use WITNESS and KTR logging if
  the kernel is compiled with support for it.
2001-03-28 02:40:47 +00:00
jhb
3e4166569d - Add the new critical_t type used to save state inside of critical
sections.
- Add implementations of the critical_enter() and critical_exit() functions
  and remove restore_intr() and save_intr().
- Remove the somewhat bogus disable_intr() and enable_intr() functions on
  the alpha as the alpha actually uses a priority level and not simple bit
  flag on the CPU.
2001-03-28 02:31:54 +00:00
ume
d26371de82 Unbreak build on alpha.
- Move in_port_t to sys/types.h.
  - Nuke in_addr_t from each endian.h.

Reported by:	jhb
2001-03-24 15:17:27 +00:00
tmm
76ba4861cd Export intrnames and intrcnt as sysctls (hw.nintr, hw.intrnames and
hw.intrcnt).

Approved by:	rwatson
2001-03-23 03:45:17 +00:00
peter
670e711dd1 Use a generic implementation of the Fowler/Noll/Vo hash (FNV hash).
Make the name cache hash as well as the nfsnode hash use it.

As a special tweak, create an unsigned version of register_t.  This allows
us to use a special tweak for the 64 bit versions that significantly
speeds up the i386 version (ie: int64 XOR int64 is slower than int64
XOR int32).

The code layout is a little strange for the string function, but I was
able to get between 5 to 10% improvement over the original version I
started with. The layout affects gcc code generation choices and this way
was fastest on x86 and alpha.

Note that 'CPUTYPE=p3' etc makes a fair difference to this.  It is
around 45% faster with -march=pentiumpro on a p6 cpu.
2001-03-17 09:31:06 +00:00
jhb
f108bc4208 Fix mtx_legal2block. The only time that it is bad to block on a mutex is
if we hold a spin mutex, since we can trivially get into deadlocks if we
start switching out of processes that hold spinlocks.  Checking to see if
interrupts were disabled was a sort of cheap way of doing this since most
of the time interrupts were only disabled when holding a spin lock.  At
least on the i386.  To fix this properly, use a per-process counter
p_spinlocks that counts the number of spin locks currently held, and
instead of checking to see if interrupts are disabled in the witness code,
check to see if we hold any spin locks.  Since child processes always
start up with the sched lock magically held in fork_exit(), we initialize
p_spinlocks to 1 for child processes.  Note that proc0 doesn't go through
fork_exit(), so it starts with no spin locks held.

Consulting from:	cp
2001-03-09 07:24:17 +00:00
jhb
5eea0dc69d Rename switch_trampoline() to fork_trampoline() on the alpha and ia64.
Suggested by:	dfr
2001-02-22 16:56:53 +00:00
jhb
41a6853d24 GC unused and now obsolete assertion macros. 2001-02-22 15:45:49 +00:00
jhb
27efeb0d30 - Don't call clear_resched() in userret(), instead, clear the resched flag
in mi_switch() just before calling cpu_switch() so that the first switch
  after a resched request will satisfy the request.
- While I'm at it, move a few things into mi_switch() and out of
  cpu_switch(), specifically set the p_oncpu and p_lastcpu members of
  proc in mi_switch(), and handle the sched_lock state change across a
  context switch in mi_switch().
- Since cpu_switch() no longer handles the sched_lock state change, we
  have to setup an initial state for sched_lock in fork_exit() before we
  release it.
2001-02-20 05:26:15 +00:00
bde
49ef1aaa13 Changed the aston() family to operate on a specified process instead of
always on curproc.  This is needed to implement signal delivery properly
(see a future log message for kern_sig.c).

Debogotified the definition of aston().  aston() was defined in terms
of signotify() (perhaps because only the latter already operated on
a specified process), but aston() is the primitive.

Similar changes are needed in the ia64 versions of cpu.h and trap.c.
I didn't make them because the ia64 is missing the prerequisite changes
to make astpending and need_resched per-process and those changes are
too large to make without testing.
2001-02-19 04:15:59 +00:00
ume
e4a288b688 Correct disordering which is corresponding to bde's fix to
i386/include/ansi.h.
2001-02-17 14:51:11 +00:00
ume
bf66c2eda8 Correct 2nd argument of getnameinfo(3) to socklen_t.
Reviewed by:	itojun
2001-02-15 10:35:55 +00:00
markm
4e9c36b300 RIP <machine/lock.h>.
Some things needed bits of <i386/include/lock.h> - cy.c now has its
own (only) copy of the COM_(UN)LOCK() macros, and IMASK_(UN)LOCK()
has been moved to <i386/include/apic.h> (AKA <machine/apic.h>).
Reviewed by:	jhb
2001-02-11 10:44:09 +00:00
jhb
a9c84e00da - Make astpending and need_resched process attributes rather than CPU
attributes.  This is needed for AST's to be properly posted in a preemptive
  kernel.  They are backed by two new flags in p_sflag: PS_ASTPENDING and
  PS_NEEDRESCHED.  They are still accesssed by their old macros:
  aston(), astoff(), etc.  For completeness, an astpending() macro has been
  added to check for a pending AST, and clear_resched() has been added to
  clear need_resched().
- Rename syscall2() on the x86 back to syscall() to be consistent with
  other architectures.
2001-02-10 02:20:34 +00:00
jhb
5f9a24a51c Add a macro mtx_intr_enable() to alter a spin lock such that interrupts
will be enabled when it is released.
2001-02-10 02:15:18 +00:00
jhb
4444722abe Use the MI ithread helper functions in the alpha hardware interrupt code. 2001-02-09 17:53:23 +00:00
bmilekic
f364d4ac36 Change and clean the mutex lock interface.
mtx_enter(lock, type) becomes:

mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)

similarily, for releasing a lock, we now have:

mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.

The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.

Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:

MTX_QUIET and MTX_NOSWITCH

The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:

mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.

Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.

Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.

Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.

Finally, caught up to the interface changes in all sys code.

Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
dfr
fed402db9f * Move exception_return to exception.s which is a more logical home for it.
* Optimise the return path for syscalls so that they only restore a minimal
  set of registers instead of performing a full exception_return.

A new flag in the trapframe indicates that the frame only holds partial
state. When it is necessary to perform a full state restore (e.g. after an
execve or signal), the flag is cleared to force a full restore.
2001-02-02 10:20:30 +00:00
mjacob
96e43ebf7b Guess that this is what Doug *intended* to commit.... 2001-02-01 21:58:34 +00:00
jhb
e532f9ac32 Remove prototype for child_return(). 2001-01-24 22:00:13 +00:00
jasone
8d2ec1ebc4 Convert all simplelocks to mutexes and remove the simplelock implementations. 2001-01-24 12:35:55 +00:00
jhb
738a41fdee Wrap the IPI definitions and function prototypes in #ifdef SMP. 2001-01-24 10:25:09 +00:00
jhb
264b1fe22a - Rename the gd_cpuno member of struct globaldata to gd_cpuid.
- Add a globaldata_register() prototype in the SMP case.
2001-01-24 10:24:49 +00:00
jhb
77583447a9 - Proc locking.
- P_OWEUPC -> PS_OWEUPC.
2001-01-24 10:23:54 +00:00
jasone
ec55088093 Move most of sys/mutex.h into kern/kern_mutex.c, thereby making the mutex
inline functions non-inlined.  Hide parts of the mutex implementation that
should not be exposed.

Make sure that WITNESS code is not executed during boot until the mutexes
are fully initialized by SI_SUB_MUTEX (the original motivation for this
commit).

Submitted by:	peter
2001-01-21 22:34:43 +00:00
jake
937122ae6d Make intr_nesting_level per-process, rather than per-cpu. Setup
interrupt threads to run with it always >= 1, so that malloc can
detect M_WAITOK from "interrupt" context.  This is also necessary
in order to context switch from sched_ithd() directly.

Reviewed By:	peter
2001-01-21 19:25:07 +00:00
phk
d147a07119 These files have been on deathrow for a couple of months, no appeal. 2001-01-16 10:01:56 +00:00
jake
422162e650 Remove unused per-cpu variables inside_intr and ss_eflags. 2001-01-12 07:47:54 +00:00
jake
4f7710fc47 - Remove compatibility macros for accessing per-cpu variables.
__FreeBSD_version 500015 can be used to detect their disappearance.
- Move the symbols for SMP_prvspace and lapic from globals.s to
  locore.s.
- Remove globals.s with extreme prejudice.
2001-01-11 14:46:26 +00:00
mjacob
03aad0d868 The alpha architecture is 64 bits, so bus_addr_t && bus_size_t should really
be 64 bits wide. The largest known current actual physical implementation
is 40 bits, so BUS_SPACE_MAXADDR should reflect this. It also seems to
me that BUS_SPACE_UNRESTRICTED should b ~0UL, not ~0.
2001-01-09 18:17:48 +00:00
obrien
50c1c6f1ac Put VCS ids in a consistent place and form. 2001-01-08 06:24:08 +00:00
obrien
464d16ce94 Remove seconds types we don't use that came in thru the NetBSD heiratage. 2001-01-08 06:17:11 +00:00
jake
d20b7bdad1 Implement accessors for per-cpu variables which don't depend on the
symbols in globals.s.

	PCPU_GET(name) returns the value of the per-cpu variable
	PCPU_PTR(name) returns a pointer to the per-cpu variable
	PCPU_SET(name, val) sets the value of the per-cpu variable

In general these are not yet used, compatibility macros remain.

Unifdef SMP struct globaldata, this makes variables such as cpuid
available for UP as well.

Rebuilding modules is probably a good idea, but I believe old
modules will still work, as most of the old infrastructure
remains.
2001-01-06 19:55:42 +00:00
obrien
65921c45f6 Sort some of the _BSD_* types. 2001-01-01 22:26:56 +00:00
obrien
99909223fe Move all VCS ids to a consistent location. 2000-12-28 18:21:32 +00:00
obrien
3bc5b00850 Add multiple inclusion protection.
PR:		23902
Submitted by:	Christian Weisgerber <naddy@mips.inka.de>
2000-12-28 18:18:23 +00:00
mjacob
036f9ff7a3 Store in globaldata our CPU ID#. Provide a lock for panics - only one
CPU can panic at a time.
Obtained from:Andrew Gallatin <gallatin@cs.duke.edu>
2000-12-09 20:52:42 +00:00
msmith
c27f2d3c49 Next phase in the PCI subsystem cleanup.
- Move PCI core code to dev/pci.
 - Split bridge code out into separate modules.
 - Remove the descriptive strings from the bridge drivers.  If you
   want to know what a device is, use pciconf.  Add support for
   broadly identifying devices based on class/subclass, and for
   parsing a preloaded device identification database so that if
   you want to waste the memory, you can identify *anything* we know
   about.
 - Remove machine-dependant code from the core PCI code.  APIC interrupt
   mapping is performed by shadowing the intline register in machine-
   dependant code.
 - Bring interrupt routing support to the Alpha
   (although many platforms don't yet support routing or mapping
   interrupts entirely correctly).  This resulted in spamming
   <sys/bus.h> into more places than it really should have gone.
 - Put sys/dev on the kernel/modules include path.  This avoids
   having to change *all* the pci*.h includes.
2000-12-08 22:11:23 +00:00