- Don't set IFF_ALLMULTI in our ifnet's if_flags if we end up allowing
all multicast due to limits in the MAC receive filters in hardware.
Requested by: rwatson (2)
that if softclock is running on another CPU and is blocked on our driver
lock, we will wait until it has acquired the lock, seen that it was
cancelled, dropped the lock, and awakened us so that we can safely destroy
the mutex.
MFC after: 3 days
- Add locked variants of el_init and el_start.
- Don't initialize the mutex and lock it during el_probe().
- Do initialize the mutex during attach. (el_probe() did destroy the mutex
to cleanup, so this meant the driver was always using a destroyed mutex
when it was running.)
- Setup the interrupt handler after ether_ifattach().
- Fix locking in el_detach() and el_ioctl().
Note: Since I couldn't actually find anyone with this hardware, I'm going
ahead and committing these changes so they won't be lost. I'll remove the
driver in a week (real purpose of the MFC after below) unless someone pipes
up to test this.
MFC after: 1 week
Tested by: gcc(1)
effect. since CPU speed is restored by degrees, we cannot use
the facility of saving cpu speed by CPUFREQ_set() effectively.
so, we need to save the value when passive cooling is in effect.
Repoeted by: Kevin Oberman <oberman__at__es.net>
or unreadable blocks, make sure to destroy the mutex we created.
Also fix an unrelated typo in a comment.
Found by: Peter Holm's stress tests
Reviewed by: dwmalone
MFC after: 3 days
by md(4). Before this change, it was possible to by-pass these flags
by creating memory disks which used a file as a backing store and
writing to the device.
This was discussed by the security team, and although this is problematic,
it was decided that it was not critical as we never guarantee that root will
be restricted.
This change implements the following behavior changes:
-If the user specifies the readonly flag, unset write operations before
opening the file. If the FWRITE mask is unset, the device will be
created with the MD_READONLY mask set. (readonly)
-Add a check in g_md_access which checks to see if the MD_READONLY mask
is set, if so return EROFS
-Do not gracefully downgrade access modes without telling the user. Instead
make the user specify their intentions for the device (assuming the file is
read only). This seems like the more correct way to handle things.
This is a RELENG_6 candidate.
PR: kern/84635
Reviewed by: phk
- Add locked variants of my_start() and my_init().
- Assert that the lock is held in several places rather than recursing.
- Overhaul failure case handling in my_attach() so that it will actually
clean up completely in each of the failure cases.
- Setup the interrupt after ether_ifattach() in my_attach().
- Remove unused callout handle from softc.
- Free the metadata for the descriptors my_in detach() (we leaked it
before).
- Fix locking in my_ioctl().
- Remove spls.
Tested by: brueffer
MFC after: 3 days
It checked other algorithms against this bug and it seems they aren't
affected.
Reported by: Mike Tancsa <mike@sentex.net>
PR: i386/84860
Reviewed by: phk, cperciva(x2)
- Add a note that additions should be made to if_free_type and not
if_free to help avoid this in the future.
This apparently fixes a use after free in if_bridge and may fix bugs
in other direct if_free_type consumers.
Reported by: thompsa
archs and enable splash(4) by default (the non-working screen savers
either don't compile or just have no effect when loaded, i.e. don't
cause harm).
MFC after: 1 week
which serial device to use in that case respectively to not rely on
the OFW names of the input/output and stdin/stdout devices. Instead
check whether input and output refers to the same device and is of
type serial (uart(4) was already doing this) and for the fallback
to a serial console in case a keyboard is the selected input device
but unplugged do the same for stdin and stdout in case the input
device is nonexistent (PS/2 and USB keyboards) or has a 'keyboard'
property (RS232 keyboards). Additionally also check whether the OFW
did a fallback to a serial console in the same way in case the
output device is nonexistent. While at it save on some variables
and for sys/boot/sparc64/loader/metadata.c move the code in question
to a new function md_bootserial() so it can be kept in sync with
uart_cpu_getdev_console() more easily.
This fixes selecting a serial console and the appropriate device
when using a device path for the 'input-device' and 'output-device'
OFW environment variables instead of an alias for the serial device
to use or when using a screen alias that additionally denotes a
video mode (like e.g. 'screen:r1024x768x60') but no keyboard is
plugged in (amongst others). It also makes the code select a serial
console in case the OFW did the same due to a misconfiguration like
both 'input-device' and 'output-device' set to 'keyboard' or to a
nonexisting device (whether the OFW does a fallback to a serial
console in case of a misconfiguration or one ends up with just no
console at all highly depends on the OBP version however).
- Reduce the size of buffers that only ever need to hold the string
'serial' accordingly. Double the size of buffers that may need to
hold a device path as e.g. '/pci@8,700000/ebus@5/serial@1,400000:a'
exceeds 32 chars.
- Remove the package handle of the '/options' node from the argument
list of uart_cpu_getdev_dbgport() as it's unused there and future
use is also unlikely.
MFC after: 1 week
When a drive is newly created, it's state is initially set to 'down',
so it won't allow saving the config to it (thus it will never know of
itself being created). Work around this by adding a new flag, that's
also checked when saving the config to a drive.
could initialise while unlocked if the bridge is not up when setting the inet
address, ether_ioctl() would call bridge_init.
Change it so bridge_init is always called unlocked and then locks before
calling bstp_initialization().
Reported by: Michal Mertl
Approved by: mlaier (mentor)
MFC after: 3 days
could initialise while unlocked if the bridge is not up when setting the inet
address, ether_ioctl() would call bridge_init.
Change it so bridge_init is always called unlocked and then locks before
calling bstp_initialization().
Reported by: Michal Mertl
Approved by: mlaier (mentor)
MFC after: 3 days
points in lookup(). The lock can be dropped safely around VFS_ROOT because
LOCKPARENT semantics with child and perent vnodes coming from different FSes
does not really have any meaningful use. On the other hard, this prevents
easily triggered deadlock on systems using automounter daemon.
some of the options test, specifically the joliet and rockridge tests.
Since the root mount callchain doesn't go through cd9660_cmount, the
default mount options aren't set. Rather than having the main codepath
assume the options are there, test for the absence of the inverted
optioin
e.g. instead of vfs_flagopt(.. "joliet" ..), test for
!vfs_flagopt(.. "nojoliet" ..)
This works for root mount, non-root mount and future nmount cases.
- in cd9660_cmount, remove inadvertent setting of "gens" when "extatt"
was set.
Reported by: grehan, Dario Freni <saturnero at freesbie org>
Tested by: Dario Freni
Not objected to by: phk
MFC after: 3 days
