The uart(4) driver has the advantage of supporting a wider variety of
hardware on a greater amount of platforms. This driver has already been
the standard on platforms such as ia64, powerpc and sparc64.
I've decided not to change anything on pc98. I'd rather let people from
the pc98 team look at this.
Approved by: philip (mentor), marcel
set MNT_UPDATE in fsflags, and delete the
"update" option from the global mount options.
MNT_UPDATE is a command, and not a property of a mount
that should persist after the command is executed.
We need to do similar things for MNT_FORCE and MNT_RELOAD.
All mount flags are prefixed by MNT_..... it would
be nice if flags which were commands were named differently
from flags which are persistent properties of a mount.
This was not such a big deal in the pre-nmount() days,
but with nmount() it is more important.
Requested by: yar
MFC after: 2 weeks
1. The FreeBSD driver was setting an interrupt coalesce delay of 1000us
for reasons that I can only speculate on. This was hurting everything
from lame sequential I/O "benchmarks" to legitimate filesystem metadata
operations that relied on serialized barrier writes. One of my
filesystem tests went from 35s to complete down to 6s.
2. Implemented the Performant transport method. Without the fix in
(1), I saw almost no difference. With it, my filesystem tests showed
another 5-10% improvement in speed. It was hard to measure CPU
utilization in any meaningful way, so it's not clear if there was a
benefit there, though there should have been since the interrupt handler
was reduced from 2 or more PCI reads down to 1.
3. Implemented MSI-X. Without any docs on this, I was just taking a
guess, and it appears to only work with the Performant method. This
could be a programming or understanding mistake on my part. While this
by itself made almost no difference to performance since the Performant
method already eliminated most of the synchronous reads over the PCI
bus, it did allow the CISS hardware to stop sharing its interrupt with
the USB hardware, which in turn allowed the driver to become decoupled
from the Giant-locked USB driver stack. This increased performance by
almost 20%. The MSI-X setup was done with 4 vectors allocated, but only
1 vector used since the performant method was told to only use 1 of 4
queues. Fiddling with this might make it work with the simpleq method,
not sure. I did not implement MSI since I have no MSI-specific hardware
in my test lab.
4. Improved the locking in the driver, trimmed some data structures.
This didn't improve test times in any measurable way, but it does look
like it gave a minor improvement to CPU usage when many
processes/threads were doing I/O in parallel. Again, this was hard to
accurately test.
USB isochronous transfer support is required for Bluetooth SCO.
While i'm here change u_int to uint and update TODO.
This should produce no visible changes unless the device is
broken (or really old).
MFC after: 3 months
for the bio for swapout write. It allows the page allocator to drain
free page list deeper. As result, a deadlock where pageout deamon sleeps
waiting for bio to be allocated for swapout is no more reproducable in
practice.
Alan said that M_USE_RESERVE shall be ressurrected and used there, but
until this is implemented, M_NOWAIT does exactly what is needed.
Tested by: pho, kris
Reviewed by: alc
No objections from: phk
MFC after: 2 weeks (RELENG_7 only)
SI_ALIAS flag and initialization of the si_parent when alias is created.
Assert that supplied parent device is not NULL.
Both situations could cause NULL dereference in the
devfs_populate_loop() when creating a symlink for SI_ALIAS'ed device.
Namely, cdp->cdp_c.si_parent may be NULL.
Reported by: mav
MFC after: 2 weeks
As a result, those arguments must be recombined before calling the real
syscal implementation. This change fixes 32-bit compatibility for
cpuset_getid(), cpuset_setid(), cpuset_getaffinity(), and
cpuset_setaffinity().
udp_output() so that argument validation occurs before jail processing.
Add additional comments explaining what's going on when we process
addresses and binding during udp_output().
MFC after: 3 weeks
Initialize %ds, %es, and %fs during CPU startup. Otherwise a garbage
value could leak to a 32-bit process if a process migrated to a different
CPU after exec and the new CPU had never exec'd a 32-bit process.
A more complete fix is needed, but this mitigates the most frequent
manifestations.
Obtained from: ups
it's non-NULL, as all callers can and should already do the required
checking. Update comments a bit more to talk about rawcb allocation
for consumers.
Reviewed by: bz
MFC after: 3 weeks
it in detail.
When setting media, don't error out when a specific media is selected.
# Note: There may be some issues still here since the EtherJet PC Card doesn't
# conform to the datasheet. Many different kinds of dongles can be plugged in
# and it is unknown how to ask which one it is.
Also, add a /* bad! */ comment to a 1/2 second delay after we set the
DC/DC parameters. This should be a *sleep of some sort for !cold.
Fortunately it is the only one and is only used when setting media, so
the benefit from removing it is small. Unfortunately, it likely
serves as an exemplar of good programming techniques, which it isn't.
2) Adds some __UserSpace__ on some of the common defines that
the user space code needs
3) Fixes a bug when we send up data to a user that failed. We
need to a) trim off the data chunk headers, if present, and
b) make sure the frag bit is communicated properly for the
msgs coming off the stream queues... i.e. we see if some
of the msg has been taken.
Obtained from: jeli contributed the VIMAGE changes on this pass Thanks Julain!
socket support. These utility routines are used only for routing and
pfkey sockets, neither of which have a notion of address, so were
required to mock up fake socket addresses to avoid connection
requirements for applications that did not specify their own fake
addresses (most of them).
Quite a bit of the removed code is #ifdef notdef, since raw sockets
don't support bind() or connect() in practice. Removing this
simplifies the raw socket implementation, and removes two (commented
out) uses of dtom(9).
Fake addresses passed to sendto(2) by applications are ignored for
compatibility reasons, but this is now done in a more consistent way
(and with a comment). Possibly, EINVAL could be returned here in
the future if it is determined that no applications depend on the
semantic inconsistency of specifying a destination address for a
protocol without address support, but this will require some amount
of careful surveying.
NB: This does not affect netinet, netinet6, or other wire protocol
raw sockets, which provide their own independent infrastructure with
control block address support specific to the protocol.
MFC after: 3 weeks
Reviewed by: bz
when it worked as generic IDE.
PR: 125422
Submitted by: Andrey V. Elsukov <bu7cher at yandex dot ru>
Approved by: imp (mentor, implicit)
MFC after: 1 week
generation of RTL810x PCIe fast ethernet controller. Note, Tx/Rx
descriptor format is different from that of first generation of
RTL8101E series. Jumbo frame is not supported for RTL810x
family.
Tested by: NAGATA Shinya ( maya AT negeta DOT com )
mutexes and replacing the obsolete if_watchdog interface. The ndis_ticktask
function calls into ieee80211_new_state under one condition with NDIS_LOCK
held. The ieee80211_new_state would call into ndis_start in some cases too,
resulting in the occasional case where ndis_start acquires NDIS_LOCK from
inside the NDIS_LOCK held by ndis_ticktask.
Obtained from: Paul B. Mahol <onemda@gmail.com>
MFC after: 1 week
page directory pages from VM_MIN_KERNEL_ADDRESS through the end of the
kernel's bss. Specifically, the dependence was in pmap_growkernel()'s one-
time initialization of kernel_vm_end, not in its main body. (I could not,
however, resist the urge to optimize the main body.)
Reduce the number of preallocated page directory pages to just those needed
to support NKPT page table pages. (In fact, this allows me to revert a
couple of my earlier changes to create_pagetables().)
page table pages have to be preallocated ...'', violates an assumption made
by minidumpsys(): kernel_vm_end is the highest virtual address that has ever
been used by the kernel. Now, however, the kernel code, data, and bss may
reside at addresses beyond kernel_vm_end. This revision modifies the upper
bound on minidumpsys()'s two page table traversals to account for this
possibility.
Use the new inline function in ia64_invalidate_icache().
While there, add proper synchronization so that we know
the fc.i instructions have taken effect when we return.
to vm_page_alloc() instead of VM_ALLOC_SYSTEM. VM_ALLOC_SYSTEM was the
logical choice before FreeBSD 7.0 because VM_ALLOC_INTERRUPT could not
reclaim a cached page. Simply put, there was no ordering between
VM_ALLOC_INTERRUPT and VM_ALLOC_SYSTEM as to which "dug deeper" into the
cache and free queues. Now, there is; VM_ALLOC_INTERRUPT dominates
VM_ALLOC_SYSTEM.
While I'm here, teach pmap_growkernel() to request a prezeroed page.
MFC after: 1 week
inpcb. When directly invoking udp_notify() from udp_ctlinput(), acquire
only a read lock; we may still see write locks in udp_notify() as the
in_pcbnotifyall() routine is shared with TCP and always uses a write lock
on the inpcb being notified.
MFC after: 1 month
some code paths, global or inpcb write locks are required, but for other
code paths, read locks or no locking at all are sufficient for the data
structures.
MFC after: 1 month
source or a specific destination address is requested as part of a send
on a UDP socket, read lock the inpcb rather than write lock it. This
will allow fully parallel transmit down to the IP layer when sending
simultaneously from multiple threads on a connected UDP socket.
Parallel transmit for more complex cases, such as when sendto(2) is
invoked with an address and there's already a local binding, will
follow.
MFC after: 1 month
the syscall code and acquires various event subsystem locks as needed.
The handling of the NOTE_TRACK for EVFILT_PROC is currently done by
calling the kqueue_register() from filt_proc() filter, causing recursive
entrance of the kqueue code. This results in the LORs and recursive
acquisition of the locks.
Implement the variant of the knote() function designed to only handle
the fork() event. It mostly copies the knote() body, but also handles
the NOTE_TRACK, removing the handling from the filt_proc(), where it
causes problems described above. The function is called from the fork1()
instead of knote().
When encountering NOTE_TRACK knote, it marks the knote as influx
and drops the knlist and kqueue lock. In this context call to
kqueue_register is safe from the problems.
An error from the kqueue_register() is reported to the observer as
NOTE_TRACKERR fflag.
PR: 108201
Reviewed by: jhb, Pramod Srinivasan <pramod juniper net> (previous version)
Discussed with: jmg
Tested by: pho
MFC after: 2 weeks
just like BIOCSETF but it doesn't drop all the packets buffered on
the discriptor and reset the statistics.
Also, when setting the write filter, don't drop packets waiting to
be read or reset the statistics.
PR: 118486
Submitted by: Matthew Luckie <mluckie@cs.waikato.ac.nz>
MFC after: 1 month
KQ_FLUX_WAKEUP(). Since the later macro clears the KQ_FLUXWAIT, the
kqueue_scan() thread may be not woken up.
Move the setting of KQ_FLUXWAIT after wakeup to correct the issue.
Reported and tested by: pho
MFC after: 3 days
level. The distinction was artificial. Some more movement around the
deck charis is likely depending on the fallout from this one.
Paths were corrected after the svn mv. Hope that's OK.
appropriate (versions not appropriate to merge omitted):
o 1.226 imp nop, save for NetBSD string (minor merging the other way)
o 1.225 jnemeth Coreage LAPCCTXD
o 1.224 martin (remove 3rd and 4th clauses)
o 1.223 kiyohara (TDK bluetooth PC Card)
o 1.222 kiyohara (Anycom BlueCard)
o 1.221 ichiro (NEC Infrontia AX420N)
o 1.219 jmcneill (EDIMAX EP-4101)
o 1.213 tsutsui (TEAC IDECARDII entry fix)
Also, while I'm here, fix some tab problems that have crept in.
Our hook creates the sysctl node before root is mounted, but after cpu
is probed. It seems that k8temp can be loaded before the cpu module and,
in those cases, dev.cpu.0.temperature was not created.
PR: 124939
is reclaimed by the kernel. This fixes a bug resulted in the kernel
over writing packet data while user-space was still processing it when
zerocopy is enabled. (Or a panic if invariants was enabled).
Discussed with: rwatson
- the protosw entries are used directly
- the usrreq functions are library routines, generally wrapped by
consumers rather than being used directly
- the usrreq structure entries are likewise typically wrapped
Remove the rather incorrect #if 0'd pr_input_t prototype for raw_input.
MFC after: 3 days
global symbols, such as raw_input and raw_output, to have lmc_ prefixes.
This doesn't affect actual functionality since the functions are static,
but will limit the opportunities for current confusion and future
difficulty.
MFC after: 3 days
into a single "__asm"-statement as GCC doesn't guarantee their
consecutive output even when using consecutive "__asm __volatile"-
statement for them. Remove the otherwise unnecessary "__volatile". [1]
- The inline assembler instructions used here alter the condition
codes so add them to the clobber list accordingly.
- The inline assembler instructions used here uses output operands
before all input operands are consumed so add appropriate modifiers.
Pointed out by: bde [1]
MFC after: 2 weeks
to global hostname and domainname variables. Where necessary, copy
to or from a stack-local buffer before performing copyin() or
copyout(). A few uses, such as in cd9660 and daemon_saver, remain
under-synchronized and will require further updates.
Correct a bug in which a failed copyin() of domainname would leave
domainname potentially corrupted.
MFC after: 3 weeks
AcpiEvaluateObject() calls, otherwise, we are not able to bring devices
back up (NULL means 0, hence always off).
While there add missing WLAN on/off support.
MFC after: 3 days
Pointy hat to: rpaulo
MPSAFE patches on current@ and stable@. This driver also has a fundamental
issue in that it sleeps when sending commands to the card including in the
if_init/if_start routines (which can be called from interrupt context). As
such, the driver shouldn't be working reliably even on 4.x.
- Add a mutex to the softc and use it to protect the softc and device
hardware.
- Setup interrupt handler after ether_ifattach().
- Remove unused sbsh_watchdog() routine.
- Protect against concurrent attempts to load firmware.
possible to exhaust and garble stack with a packet that contains a couple
of hundreds nested encapsulation levels.
Submitted by: Ming Fu <fming@borderware.com>
Reviewed by: rwatson
PR: kern/85320
- Add a mutex to the softc and use it to protect the softc and device
hardware.
- Setup interrupt handler after attaching device to network stack.
- Use device_set_desc() rather than device_quiet() plus a manual printf
that simulates the normal probe printf.
- Axe next_sbni_unit and instead just leave room for two sbni devices for
each bus attachment.
- Don't bzero the already-zero'd softc.
- Add a detach method to the PCI driver.
- Add a lock to protect the list of available devices used to chain
interrupt handlers for dual port ISA cards.
- Remove unused watchdog routine.
- If if_alloc() fails, make sbni_attach() return an error rather than
panic'ing.
- Consolidate code to free bus resources into sbni_release_resources().
- Clear IFF_DRV_RUNNING|OACTIVE in stop() routine instead of in callers.
- Let ether_ioctl() handle SIOCSIFMTU.
and stable@. It also is a driver for an older non-802.11 wireless PC card
that is quite slow in comparison to say, wi(4). I know Warner wants this
driver axed as well.
- Add a mutex to the softc and use it to lock the softc and device hardware.
- Use a private timer to replace if_watchdog/if_timer.
- Use if_printf() rather than if_xname.
- Setup interrupt handler after ether_ifattach().
current@ and stable@ for the locking patches. The driver can always be
revived if someone tests it.
This driver also sleeps in its if_init routine, so it likely doesn't really
work at all anyway in modern releases.
- Add a mutex to the softc and use it to protect the softc and device
hardware.
- Setup interrupt handler after interface attach.
- Retire 'unit' from softc and use if_printf() instead.
- Don't frob IFF_UP in the driver.
- Use callout_() rather than timeout() and untimeout().
- Add a mutex to the softc and use it to protect the softc and device
hardware.
- Setup interrupt handler after ether_ifattach().
- Use a private timer instead of if_timer/if_watchdog.
- Retire arl_unit from the softc and use if_printf() and device_printf()
instead.
Note that the unpatched driver in 6.x and later does not work with the
hardware, so the one person who had volunteered to test the patch wasn't
able to test it.
dispatched without Giant, and add NETISR_FORCEQUEUE, which allows specific
netisr handlers to always be dispatched via a queue (deferred). Mark the
usb and if_ppp netisr handlers as NETISR_FORCEQUEUE, and explicitly
acquire Giant in those handlers.
Previously, any netisr handler not marked NETISR_MPSAFE would necessarily
run deferred and with Giant acquired. This change removes Giant
scaffolding from the netisr infrastructure, but NETISR_FORCEQUEUE allows
non-MPSAFE handlers to continue to force deferred dispatch so as to avoid
lock order reversals between their acqusition of Giant and any calling
context.
It is likely we will be able to remove NETISR_FORCEQUEUE once
IFF_NEEDSGIANT is removed, as non-MPSAFE usb and if_ppp drivers will no
longer be supported.
Reviewed by: bz
MFC after: 1 month
X-MFC note: We can't remove NETISR_MPSAFE from stable/7 for KPI reasons,
but the rest can go back.
soun->sun_path isn't a null-terminated string. As UNIX(4) states, "the
terminating NUL is not part of the address." Since strlcpy has to return
"the total length of the string [it] tried to create," it walks off the end
of soun->sun_path looking for a \0.
This reverts r105332.
Reported by: Ryan Stone
disabled if one (or more) of the member interfaces does not support it. Always
turn off LRO since we can not bridge a combined frame.
Tested by: Stefan Lambrev
generating an RTM_MISS for every IP packet forwarded making user space
routing daemons unhappy.
PR: kern/123621, kern/124540, kern/122338
Reported by: Paul <paul gtcomm.net>, Mike Tancsa <mike sentex.net> on net@
Tested by: Paul and Mike
Reviewed by: andre
MFC after: 3 days
code is believed to be MPSAFE, and leaving aside the IPv6 route cache in
forwarding, Giant appears not to adequately synchronize the data structures
in the input or forwarding paths.
ceiling as a fraction of the kernel map's size rather than an absolute
quantity. Thus, scaling of the kmem map's size will be automatic with
changes to the kernel map's size.
datagram-only protocols, such as UDP. This version removes use of
sblock(), which is not required due to an inability to interlace data
improperly with datagrams, as well as avoiding some of the larger loops
and state management that don't apply on datagram sockets.
This is experimental code, so hook it up only for UDPv4 for testing; if
there are problems we may need to revise it or turn it off by default,
but it offers *significant* performance improvements for threaded UDP
applications such as BIND9, nsd, and memcached using UDP.
Tested by: kris, ps
there still being some well-known races in mld6 and nd6, running with
Giant over the netisr handler provides little or not additional
synchronization that might cause mld6 and nd6 to behave better.
already commited but with a wrong msleep variant and then
backed out. Note that this changes the semantic a little
as msleep_spin does not let us to specify priority after
wakeup.
Approved by: wkoszek, cognet
Approved by: kib (mentor)
ATM Tx/Rx checksum offload is supported but TSO and jumbo frame is
not yet supported. Because these newer controllers use different
descriptor formats, a flag RL_FLAG_DESCV2 flag was introduced to
handle that case in Tx/Rx handler. Also newer controllers seems to
require to not touch 'enable Tx/Rx bit' in RL_CPLUS_CMD register
so don't blindly try to set that bits.
Note, it seems that there is still power-saving related issue where
driver fails to attach PHY. Rebooting seems to fix that issue but
number of required reboots varys.
Many thanks to users that helped during developement. I really
appreciate their patient and test/feedbacks.
a dedicated flag that represents controller capabilities/events.
This will simplify many part of code that requires different
workaround for each controller revisions and will enhance
readability.
While I'm here move PHY wakeup code up before mii_phy_probe() which
seems to help to wake PHY in some cases.
RL_TXCFG register to identify a device in device probe. Reflect the
fact by modifing device description with general ethernet
controller family.
Note, rl_basetype in struct rl_type is not used and the more
detailed information is provided with rl_hwrev structure.
Previously we reused the space in the request buffer after the request
header to hold config pages during a transaction. This does not work when
reading large pages however. Also, we were already malloc'ing a buffer to
do a copyin/copyout w/o holding locks that was then copied into/out of the
request buffer. Instead, go ahead and use bus dma to alloc a buffer for
each config page request (and RAID actions that have an associated
ActionSGE). This results in fewer data copies and allows for larger sized
requests. For now the maximum size of a request is arbitrarily limited to
16 MB.
MFC after: 2 weeks
locally configured. This is more in line with the behaviour of other popular
bridging implementations and makes bridges more predictable after reboots for
example.
Reviewed by: thompsa
MFC after: 1 week
rather than write locking: while we need to maintain a valid reference
to the inpcb and fix its state, no protocol layer state is modified
during an IPv4 UDP receive -- there are only changes at the socket
layer, which is separately protected by socket locking.
While parallel concurrent receive on a single UDP socket is currently
relatively unusual, introducing read locking in the transmit path,
allowing concurrent receive and transmit, will significantly improve
performance for loads such as BIND, memcached, etc.
MFC after: 2 months
Tested by: gnn, kris, ps
