- vt_vga(4) is a driver rather than a function so reference it accordingly.
- Uncomment HISTORY section given that vt(4) will first appear in 9.3.
Reviewed by: emaste (modulo last part)
MFC after: 3 days
Sponsored by: Bally Wulff Games & Entertainment GmbH
With this change and previous work from ray@ it will be possible to put
both in GENERIC, and have one enabled by default, but allow the other to
be selected via the loader.
(The previous implementation had separate kern.vt.disable and
hw.syscons.disable tunables, and would panic if both drivers were
compiled in and neither was explicitly disabled.)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
is identified as "DOS/MBR boot sector" as opposed to "x86 boot sector".
This trips up vmrun.sh when using the new file(1) and makes it want to boot
into the installer instead.
Fix this by just looking for "boot sector" instead.
Many thanks to jmg for reviewing the (previous version) of the text
and providing grammar and content fixes.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
separate argument structure with added level_type field for
CPUID_CPUID_COUNT request.
Reviewed by: attilio (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
performing cpuid calls.
Add also a new way to specify the level type to cpucontrol(8) as
reported in the manpage.
Sponsored by: EMC / Isilon storage division
Reviewed by: bdrewery, gcooper
Testerd by: bdrewery
This consists of the unique glyphs from the following font files in
/usr/share/syscons/fonts:
iso*.fnt ISO-8859-1 West European
iso02*.fnt ISO-8859-2 Central European
iso04*.fnt ISO-8859-4 Baltic
iso05*.fnt ISO-8859-5 Cyrillic
iso07*.fnt ISO-8859-7 Greek
iso08*.fnt ISO-8859-8 Hebrew
iso09*.fnt ISO-8859-9 Turkish
iso15*.fnt ISO-8859-15 West European
Sponsored by: The FreeBSD Foundation
This allows you to give a bhyve instance multiple network devices
and disk devices easily by specifying additional "-d " and "-t "
options.
Reviewed by: neel
Sponsored by: Norse
during SUBDIR_PARALLEL builds. This augments the coarse .WAIT mechanism,
which is still useful if you've got a situation such as "almost everything
depends on A and B".
Because the parallel subdir mechanism uses non-obvious mangling of
target names, which should probably remain a private detail of the
implementation, it's not easy to do things like "libfoo: libbar", so
instead the new mechanism lets you set a variable that lists dependencies:
SUBDIR_DEPEND_libfoo= libgroodah libpouet
Note that while I'm using libraries as an example here, it really has
nothing to do with the generated library files. This is really saying
"build in directory libfoo after building in the libgroodah and libpouet
directories."
This updates lib/Makefile with dependency information based on the old
almost-accurate comment block and by combing through lib/* makefiles
looking for LDADD dependencies to other libraries within lib/*.
Reviewed by: Jia-Shiun Li <jiashiun@gmail.com>
This was never intended to be off by default but was done this way
because the initial patches broke the build. Things seem stable now
(have been so for a while too) and "make tinderbox" is clean so let's
try again.
Announced in freebsd-current; all reported shortcomings have been
addressed.
vtfontcvt(8) is now built during buildworld, so can be used as a
bootstrap tool to create vt(4) fonts from source .hex or .bdf font
files, rather than having uuencoded binary fonts in the tree.
Sponsored by: The FreeBSD Foundation
Force all the contents of /usr/tests to go into a separate distribution
file so that users of binary releases can easily choose to not install it.
To make this possible, we need two fixes:
- bsd.subdir.mk needs to properly honor NO_SUBDIR in all cases so that we
do not recurse into 'tests' subdirectories when we needn't. Otherwise,
we end up with some Kyuafiles in base.txz.
- etc/Makefile needs to skip installing tests in its 'distribute' target
so that a Kyuafile doesn't leak into base.txz.
Approved by: gjb
When FILES is defined in a Makefile that _also_ includes bsd.subdir.mk, the
build of the files (if any) was not properly triggered during the build
stage. This was because bsd.files.mk did not define the buildfiles target
if it was already defined... and bsd.subdir.mk defined this target on its
own, thus causing a conflict.
Fix this by unconditionally defining buildfiles from bsd.files.mk; this is
safe because nothing else in the tree needs to redefine this and because the
target itself contains no commands: all it does is define dependencies.
Also ensure that bsd.files.mk is always pulled in by bsd.test.mk regardless
of what bsd.prog.mk does.
These fixes allow "make installworld" to run cleanly on a system with
read-only src and obj trees.
This is "make tinderbox" clean.
Reviewed by: imp
Obtained from: jilles
This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.
Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]
Mark known build failures as NO_PIE for now.
The only known runtime failure was rtld.
[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by: Shawn Webb <lattera@gmail.com>
Discussed between: des@ and Shawn Webb [2]
In r266650, we made libatf-c and libatf-c++ private libraries so that no
components outside of the source tree could unintendedly depend on them.
This change does the same for the "atf-sh library" by moving the atf-sh
interpreter from its public location in /usr/bin/ to the private location
in /usr/libexec/. Our build system will ensure that our own test programs
use the right binary, but users won't be able to depend on atf-sh by
"mistake".
Committing this now to ride the UPDATING notice added with r267172 today.
This exists already in plain.test.mk and tap.test.mk and should have been
added to atf.test.mk too when the feature was first introduced.
(It is probably time to address the related TODOs but I will do that
separately.)
The description of WITH/WITHOUT tweaks should only document the non-default
option. TESTS still defaults to no, so the option to be documented is
WITH_TESTS.
o NR_REG_SW_NIC -> NR_REG_SW
o NR_RING_NIC_SW -> NR_REG_NIC_SW
o NETMAP_NO_TX_SYNC -> NETMAP_NO_TX_POLL
o NETMAP_DO_RX_SYNC -> NETMAP_DO_RX_POLL
I hope dear luigi has not left those as an excercise to careful
reader, in which case I apologize in advance for ruining his play.
MFC after: 1 week
Add some mention of the functions used by protocol implementations,
upcalls, and other general routines.
Not all functionality is documented; in particular:
o the *at() variants, which are useful only for implementing the
corresponding syscalls.
o soconnect2(), also only used to implement a syscall (socketpair()).
o sockargs(), which is essentually unused and only tangentially
socket-related.
o selsocket(), which is commented as being present solely for use by
netncp and netsmb.
o getsockaddr(), which is just a convenience shortcut for copyin().
Reviewed by: jhb (previous version)
Approved by: hrs (mentor)
through a voltage divisor (R163 and R164 on page 4 of BBB schematic).
Add a note about this on ti_adc(4) man page. The ti_adc(4) man page will
first appear on 10.1-RELEASE.
MFC after: 1 week
Suggested by: Sulev-Madis Silber (ketas)
Manual page reviewed by: brueffer (D127)
from the slave (for example, when master is failing on disk IO and could not be
logged into or execute cronjob).
Commented out examples changed too to simplify future merging.
Idea by: kaa@zvuki.ru
Discussed with: glebius
MFC after: 1 week
We should not be leaking these interfaces to the outside world given
that it's much easier for third-party components to use the devel/atf
package from ports.
As a side-effect, we can also drop the ATF pkgconfig and aclocal files
from the base system. Nothing in the base system needs these, and it
was quite ugly to have to get them installed only so that a few ports
could build. The offending ports have been fixed to depend on
devel/atf explicitly.
Reviewed by: bapt
Makefiles are evaluated without building things. In a normal build,
the prerequisites would be built, and CC would be an actual thing. In
an INDEX build, though, they don't exists. Redirect stderr to get rid
of annoying messages, and assume that the compiler version is 0 if the
actual compiler can't tell us. Do this in preference to guessing based
on numbers because gcc410 might be 4.10, or 4.1.0 and without
carefully crafted special knowledge we differentiate between them
easily (also ming-gcc has no clues at all). Elsewhere, don't trust
the compiler version if it is 0.
ismt(4) supports the SMBus Message Transport controller found on Intel
C2000 series (Avoton) and S1200 series (Briarwood) Atom SoCs.
Sponsored by: Intel
this allows make -n to do tree walks as expected without
doing anything else (as intended).
Use prefix _sub. to help avoid conflict with any real target.
Reviewed by: imp
Targets thus marked are supposed to run even with -n.
As such they should not do anything except run the sub-make.
Use an intermediate target _* to associate with _SUBDIR and which
depends on installincludes etc so that we get the correct behavior with -n.
Reviewed by: marcel
This is not a comprehensive list, as the variables themselves are spread
out over multiple files, but it is a start.
Add a section to make.conf noting that variables may be set there that
affect ports builds, but refer to ports.7 and elsewhere for the actual
listing; any listing in make.conf.5 would likely become out of date
fairly quickly.
PR: docs/189199
Reviewed by: bdrewery (previous version)
Approved by: hrs (mentor)
src/sys and the rest of the tree for builds.
o eliminate including bsd.mkopts.mk for the moment in kern.opts.mk
o No need to include src.opts.mk at all anymore. The reasons for it
are now coverted in sys.mk and src.sys.mk.
and MK_LLDB=no, so set those explicitly (now that we can do
that). Simplify tests for these variables as well, since we know they
will always be defined regardless of the phase of the build.
with clang 3.3. Useful for test building -current on a -stable system
in individual directories. Potentially useful if we ever want to
support, say, gcc 4.8 or 4.9's new warnings when building with an
external toolchain (but such support not yet committed). Document
the bsd.compiler.mk interface.
install it as fmake. This defaults to no. This should be viewed as the
first step towards evental migration of this historic code to ports
and removal from the tree.
This driver supports the low and high precision models (9 and 11 bits) and
it will auto-detect the both variants.
The driver expose the temperature registers (actual temperature, shutdown
and hysteresys temperature) and also the configuration register.
It was tested on FDT systems: RPi, BBB and on non-FDT systems: AR71xx, with
both, hardware i2c controllers (when available) and gpioiic(4).
This provides a simple and cheap way for verifying the i2c bus on embedded
systems.
versions. With its movement to src.opts.mk, bsd.prog.mk was testing
COMPILER_TYPE without including the bsd.compiler.mk anymore. In the
source tree, this caused no problems, for reasons that aren't clear,
but does cause problems outside of the source tree. Allow
bsd.compiler.mk to be included multiple times safely, and always
include bsd.compiler.mk at the top of bsd.prog.mk. Resist the urge to
put it in bsd.init.mk, since that would reintroduce the implicit
include.
options, so move their processing there. This fixes issues with
Makefiles that define NO_MAN=t and only inlcude bsd.*.mk files. A few
ports fell into this category, and they should be fixed by this change.
Also, for now, disable the warning about NO_foo being deprecated. More
work is needed than anticipated before we can do that, so kill the
noise for now.
cards. LSI has been maintaining this driver outside of the FreeBSD
tree. It overlaps support of ThunderBolt and Invader cards that mfi(4)
supports. By default mfi(4) will attach to cards. If the tunable:
hw.mfi.mrsas_enable=1
is set then mfi(4) will not probe and attach to these newer cards and
allow mrsas(4) to attach. So by default this driver will not effect
a FreeBSD system unless mfi(4) is removed from the kernel or the
tunable is enabled.
mrsas(4) attaches disks to the CAM layer so it depends on CAM and devices
show up as /dev/daX. mfiutil(8) does not work with mrsas. The FreeBSD
version of MegaCli and StorCli from LSI do work with mrsas. It appears
that StorCli only works with mrsas. MegaCli appears to work with mfi(4)
and mrsas(4).
It would be good to add mfiutil(4) support to mrsas, emulations modes,
kernel logging, device aliases to ease the transition between mfi(4)
and mrsas(4).
Style issues should be resolved by LSI when they get committers approved.
The plan is get this driver in FreeBSD 9.3 to improve HW support.
Thanks to LSI for developing, testing and working with FreeBSD to
make this driver co-exist in FreeBSD. This improves the overall
support of MegaRAID SAS.
Submitted by: Kashyap Desai <Kashyap.Desai@lsi.com>
Reviewed by: scottl
MFC after: 3 days
Sponsored by: LSI
build world, so it is the only make we build or install. fmake is
still in the tree, but disconnected, and upgrades from older systems
that still have bmake has not been removed, but its state has not been
tested (it should work given how minimal the work to upgrade to bmake
is).
/etc/src.conf to this file as well. Now, it will only affect builds of
/usr/src and not others that use the bsd.*.mk files. Specifically
don't install src.opts.mk so we can catch when it 'leaks' into
bsd.*.mk again and have there be errors when this happens. Future
commits will move to including src.opts.mk instead of bsd.own.mk when
all that's needed is one of the MK_FOO options from src.opts.mk.
Future options should be placed here, unless they directly affect a
bsd.*.mk file, in which case they should be placed in bsd.opts.mk.
thicket of .if ${COMPILER_TYPE} == "clang" that controls
warnings. Also, use CFLAGS.clang in a couple places in preference to
having a similar construct that's related to the CWARNFLAGS changes.
default. This restores more of the historical expectations that
were broken when we started disallowing both WITH_FOO and
WITHOUT_FOO to be defined.
[2] Document this new behavior, and improve the documentation in
general here.
Submitted by: sjg@ [1].
This should have been included in r265236.
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
MFC after: 3 days
Sponsored by: LSI, Spectra Logic
This is derived from the mps(4) driver, but it supports only the 12Gb
IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108.
Some notes about this driver:
o The 12Gb hardware can do "FastPath" I/O, and that capability is included in
this driver.
o WarpDrive functionality has been removed, since it isn't supported in
the 12Gb driver interface.
o The Scatter/Gather list handling code is significantly different between
the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather
lists.
Thanks to LSI for developing and testing this driver for FreeBSD.
share/man/man4/mpr.4:
mpr(4) man page.
sys/dev/mpr/*:
mpr(4) driver files.
sys/modules/Makefile,
sys/modules/mpr/Makefile:
Add a module Makefile for the mpr(4) driver.
sys/conf/files:
Add the mpr(4) driver.
sys/amd64/conf/GENERIC,
sys/i386/conf/GENERIC,
sys/mips/conf/OCTEON1,
sys/sparc64/conf/GENERIC:
Add the mpr(4) driver to all config files that currently
have the mps(4) driver.
sys/ia64/conf/GENERIC:
Add the mps(4) and mpr(4) drivers to the ia64 GENERIC
config file.
sys/i386/conf/XEN:
Exclude the mpr module from building here.
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
MFC after: 3 days
Tested by: Chris Reeves <chrisr@spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added
lindev(4) was only used to provide /dev/full which is now a standard feature of
FreeBSD. /dev/full was never linux-specific and provides a generally useful
feature.
Document this in UPDATING and bump __FreeBSD_version. This will be documented
in the PH shortly.
Reported by: jkim
It exposes I/O resources to user space, so that programs can peek
and poke at the hardware. It does not itself have knowledge about
the hardware device it attaches to.
Sponsored by: Juniper Networks, Inc.
