The zero_region() kernel interface was previously undocumented.
Add a new zero_region(9) manual page to document it.
Submitted by: Ka Ho Ng <khng@freebsdfoundation.org>
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28914
with the semantic following C11 signal_fence, that is, it establishes
ordering between its place and any interrupt handler executing on the
same CPU.
Reviewed by: markj, mjg, rlibby
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28909
The commit below added parallel service startup, and it needs to be
documented, so people know about it.
PR: 249192
MFC with: 77e1ccbee3
Reviewed by: yuripv
Differential Revision: https://reviews.freebsd.org/D28898
We now live in the world of git, and release(7) should reflect that.
As of the commit referenced below, release images also no longer
include (stale) documentation, as the documentation has moved to
AsciiDoctor. This means that a few environment variables no longer
make sense, so remove them from their sections and mention them in
the compatibility section instead.
While here, also pet mandoc.
PR: 253615
MFC after: 3 days
MFC with: f61e92ca5a release: permanently remove the 'reldoc'
target and associates
Reviewed by: gjb, lwhsu, yuripv
Differential Revision: https://reviews.freebsd.org/D28881
Add /var/run/bhyve/ to BSD.var.dist so we don't have to call mkdir when
creating the unix domain socket for a given bhyve vm.
The path to the unix domain socket for a bhyve vm will now be
/var/run/bhyve/vmname instead of /var/run/bhyve/checkpoint/vmname
Move BHYVE_RUN_DIR from snapshot.c to snapshot.h so it can be shared
to bhyvectl(8).
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D28783
Our uefi support has included environment variable support for several years
now. Remove the bogus blanket statement saying we don't support them.
MFC After: 3 days
Packages default to ending up in a different location compared to the
documentation, so catch up to the implementation by referring to the
location where packages can usually be found if no environment variables
have been set.
While here, also update the mention of the file extension to match the
txz format that packages use.
PR: 253179, 224370
Reported by: rwatson, jeromer at fastmail dotnet
Note that this algorithm implements the mode defined in RFC 8439.
Reviewed by: cem
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27836
This is a prerequisite to allowing the use of hardware watchpoints for
userspace debuggers.
This is also a slight departure from the x86 behaviour, since `si_addr`
returns the data address that triggered the watchpoint, not the
address of the instruction that was executed. Otherwise, there is no
straightforward way for the application to determine which watchpoint
was triggered. Make a note of this in the siginfo(3) man page.
Reviewed by: jhb, markj (earlier version)
Tested by: Michał Górny (mgorny@gentoo.org)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28561
- improved pipe calculation which does not degrade under heavy loss
- engaging in Loss Recovery earlier under adverse conditions
- Rescue Retransmission in case some of the trailing packets of a request got lost
All above changes are toggled with the sysctl "rfc6675_pipe" (disabled by default).
Reviewers: #transport, tuexen, lstewart, slavash, jtl, hselasky, kib, rgrimes, chengc_netapp.com, thj, #manpages, kbowling, #netapp, rscheff
Reviewed By: #transport
Subscribers: imp, melifaro
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D18985
This adds a new sysctl to Wellspring Touchpad driver for controlling
Z-Axis (2-finger vertical scroll) direction "hw.usb.wsp.z_invert".
Submitted by: James Wright <james.wright_AT_digital-chaos_DOT_com>
Reviewed by: wulf
PR: 253321
Differential revision: https://reviews.freebsd.org/D28521
Since we ship a ktls(4) enabled OpenSSL version, mention
the src.conf(5) option WITH_OPENSSL_KTLS in the manual page.
Reviewed by: jhb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D28435
Currently, OpenCrypto consumers can request asynchronous dispatch by
setting a flag in the cryptop. (Currently only IPSec may do this.) I
think this is a bit confusing: we (conditionally) set cryptop flags to
request async dispatch, and then crypto_dispatch() immediately examines
those flags to see if the consumer wants async dispatch. The flag names
are also confusing since they don't specify what "async" applies to:
dispatch or completion.
Add a new KPI, crypto_dispatch_async(), rather than encoding the
requested dispatch type in each cryptop. crypto_dispatch_async() falls
back to crypto_dispatch() if the session's driver provides asynchronous
dispatch. Get rid of CRYPTOP_ASYNC() and CRYPTOP_ASYNC_KEEPORDER().
Similarly, add crypto_dispatch_batch() to request processing of a tailq
of cryptops, rather than encoding the scheduling policy using cryptop
flags. Convert GELI, the only user of this interface (disabled by
default) to use the new interface.
Add CRYPTO_SESS_SYNC(), which can be used by consumers to determine
whether crypto requests will be dispatched synchronously. This is just
a helper macro. Use it instead of looking at cap flags directly.
Fix style in crypto_done(). Also get rid of CRYPTO_RETW_EMPTY() and
just check the relevant queues directly. This could result in some
unnecessary wakeups but I think it's very uncommon to be using more than
one queue per worker in a given workload, so checking all three queues
is a waste of cycles.
Reviewed by: jhb
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28194
Handling of unknown MACs on an bridge with incomplete learning
capabilites (aka uplink ports) can be defined in different ways.
The classical approach is to broadcast unicast frames send to an
unknown MAC, because the unknown devices can be everywhere. This mode
is default for ng_bridge(4).
In the case of dedicated uplink ports, which prohibit learning of MAC
addresses in order to save memory and CPU cycles, the broadcast
approach is dangerous. All traffic to the uplink port is broadcasted
to every downlink port, too. In this case, it's better to restrict the
distribution of frames to unknown MAC to the uplink ports only.
In order to keep the chance small and the handling as natural as
possible, the first attached link is used to determine the behaviour
of the bridge: If it is an "uplink" port, then the bridge switch from
classical mode to restricted mode.
Reviewed By: kp
Approved by: kp (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28487
The ng_bridge(4) node is designed to work in moderately small
environments. Connecting such a node to a larger network rapidly fills
the MAC table for no reason. It even become complicated to obtain data
from the gettable message, because the result is too large to
transmit.
This patch introduces, two new functionality bits on the hooks:
- Allow or disallow MAC address learning for incoming patckets.
- Allow or disallow sending unknown MACs through this hook.
Uplinks are characterized by denied learing while sending out
unknowns. Normal links are charaterized by allowed learning and
sending out unknowns.
Reviewed by: kp
Approved by: kp (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D23963
update mrsas(4) since big-endian is supported since
e34a057ca6
Reviewed by: bdragon, gbe
Sponsored by: Eldorado Research Institute (eldorado.org.br)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28475
Glen (@gjb) noticed that I am haven't mentioned the authors of the
WireGuard device driver in the manual page.
This is commit addressed this commit.
Reviewed by: gjb, brueffer
Differential Revision: https://reviews.freebsd.org/D28464
X-MFC-with: e59d9cb412
This option has been equivalent to any form of C++ support since libstdc++
was removed. Therefore, replace all MK_LIBCPLUSPLUS uses with MK_CXX.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D27974
The argument passed to g_provider_by_name(9) can be a geom name or a
fullpath.
- g_provider_by_name() gained this functionality in
769afdc71e.
Reviewed by: imp, kevans
Approved by: kevans (mentor)
Differential Revision: https://reviews.freebsd.org/D27566
There's a third party dependency on this option; currently,
net/openldap24-{,sasl-}client. At least mention that an openldap from ports
is needed for this option.
PR: 252866
Reported-by: Build Option Survey via Michael Dexter
MFC-after: 3 days
Use hsctrl_load to load the module at boot time.
Submitted by: Shunchao Hu <ankohuu_outlook.com>
Reviewed by: wulf
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D28343
- Document a constraint on the AAD size for AES-GCM.
- Note that the list of supported platforms and add-on devices is not
complete and indicate that QAT devices will show up in pciconf
output. [1]
PR: 252984 [1]
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC ("Netgate")
Chained policing should be able to reuse the classification of
traffic. A new mbuf_tag type is defined to handle gereral QoS
marking. A new subtype is defined to track the color marking.
Reviewed by: manpages (bcr), melifaro, kp
Approved by: kp (mentor)
Sponsored by: IKS Service GmbH
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22110
