and will try to load it if it's not present. To better meet these
expectations, change the module name for the loopback interface from
'loop' to 'if_lo'. The loopback interface is always compiled into the
base kernel, so there are no resulting changes in kld files, etc.
Discussed with: brooks (ages ago)
MFC after: 1 week
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.
Reviewed by: bz
Approved by: re (vimage blanket)
network stacks, VNET_SYSINIT:
- Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will
occur each time a network stack is instantiated and destroyed. In the
!VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT.
For the VIMAGE case, we instead use SYSINIT's to track their order and
properties on registration, using them for each vnet when created/
destroyed, or immediately on module load for already-started vnets.
- Remove vnet_modinfo mechanism that existed to serve this purpose
previously, as well as its dependency scheme: we now just use the
SYSINIT ordering scheme.
- Implement VNET_DOMAIN_SET() to allow protocol domains to declare that
they want init functions to be called for each virtual network stack
rather than just once at boot, compiling down to DOMAIN_SET() in the
non-VIMAGE case.
- Walk all virtualized kernel subsystems and make use of these instead
of modinfo or DOMAIN_SET() for init/uninit events. In some cases,
convert modular components from using modevent to using sysinit (where
appropriate). In some cases, do minor rejuggling of SYSINIT ordering
to make room for or better manage events.
Portions submitted by: jhb (VNET_SYSINIT), bz (cleanup)
Discussed with: jhb, bz, julian, zec
Reviewed by: bz
Approved by: re (VIMAGE blanket)
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.
Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.
Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.
This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.
Bump __FreeBSD_version and update UPDATING.
Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.
Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.
Vnet modules and protocol domains may now register destructor
functions to clean up and release per-module state. The destructor
mechanisms can be triggered by invoking "vimage -d", or a future
equivalent command which will be provided via the new jail framework.
While this patch introduces numerous placeholder destructor functions,
many of those are currently incomplete, thus leaking memory or (even
worse) failing to stop all running timers. Many of such issues are
already known and will be incrementaly fixed over the next weeks in
smaller incremental commits.
Apart from introducing new fields in structs ifnet, domain, protosw
and vnet_net, which requires the kernel and modules to be rebuilt, this
change should have no impact on nooptions VIMAGE builds, since vnet
destructors can only be called in VIMAGE kernels. Moreover,
destructor functions should be in general compiled in only in
options VIMAGE builds, except for kernel modules which can be safely
kldunloaded at run time.
Bump __FreeBSD_version to 800097.
Reviewed by: bz, julian
Approved by: rwatson, kib (re), julian (mentor)
and used in a large number of files, but also because an increasing number
of incorrect uses of MAC calls were sneaking in due to copy-and-paste of
MAC-aware code without the associated opt_mac.h include.
Discussed with: pjd
to optionally have overlapping unit numbers if attached in different
vnets.
At this stage if_loop is the only clonable ifnet class that has been
extended to allow for such overlapping allocation of unit numbers, i.e.
in each vnet it is possible to have a lo0 interface. Other clonable ifnet
classes remain to operate with traditional semantics, i.e. each instance
of a clonable ifnet will be assigned a globally unique unit number,
regardless in which vnet such an ifnet becomes instantiated.
While here, garbage collect unused _lo_list field in struct vnet_net,
as well as improve indentation for #defines in sys/net/vnet.h.
The layout of struct vnet_net has changed, therefore bump
__FreeBSD_version.
This change has no functional impact on nooptions VIMAGE kernel builds.
Reviewed by: bz, brooks
Approved by: julian (mentor)
rearrange / replace / adjust several INIT_VNET_* initializer
macros, all of which currently resolve to whitespace.
Reviewed by: bz (an older version of the patch)
Approved by: julian (mentor)
dependency tracking and ordering enforcement.
With this change, per-vnet initialization functions introduced with
r190787 are no longer directly called from traditional initialization
functions (which cc in most cases inlined to pre-r190787 code), but are
instead registered via the vnet framework first, and are invoked only
after all prerequisite modules have been initialized. In the long run,
this framework should allow us to both initialize and dismantle
multiple vnet instances in a correct order.
The problem this change aims to solve is how to replay the
initialization sequence of various network stack components, which
have been traditionally triggered via different mechanisms (SYSINIT,
protosw). Note that this initialization sequence was and still can be
subtly different depending on whether certain pieces of code have been
statically compiled into the kernel, loaded as modules by boot
loader, or kldloaded at run time.
The approach is simple - we record the initialization sequence
established by the traditional mechanisms whenever vnet_mod_register()
is called for a particular vnet module. The vnet_mod_register_multi()
variant allows a single initializer function to be registered multiple
times but with different arguments - currently this is only used in
kern/uipc_domain.c by net_add_domain() with different struct domain *
as arguments, which allows for protosw-registered initialization
routines to be invoked in a correct order by the new vnet
initialization framework.
For the purpose of identifying vnet modules, each vnet module has to
have a unique ID, which is statically assigned in sys/vimage.h.
Dynamic assignment of vnet module IDs is not supported yet.
A vnet module may specify a single prerequisite module at registration
time by filling in the vmi_dependson field of its vnet_modinfo struct
with the ID of the module it depends on. Unless specified otherwise,
all vnet modules depend on VNET_MOD_NET (container for ifnet list head,
rt_tables etc.), which thus has to and will always be initialized
first. The framework will panic if it detects any unresolved
dependencies before completing system initialization. Detection of
unresolved dependencies for vnet modules registered after boot
(kldloaded modules) is not provided.
Note that the fact that each module can specify only a single
prerequisite may become problematic in the long run. In particular,
INET6 depends on INET being already instantiated, due to TCP / UDP
structures residing in INET container. IPSEC also depends on INET,
which will in turn additionally complicate making INET6-only kernel
configs a reality.
The entire registration framework can be compiled out by turning on the
VIMAGE_GLOBALS kernel config option.
Reviewed by: bz
Approved by: julian (mentor)
from existing functions for initializing global state.
At this stage, the new per-vnet initializer functions are
directly called from the existing global initialization code,
which should in most cases result in compiler inlining those
new functions, hence yielding a near-zero functional change.
Modify the existing initializer functions which are invoked via
protosw, like ip_init() et. al., to allow them to be invoked
multiple times, i.e. per each vnet. Global state, if any,
is initialized only if such functions are called within the
context of vnet0, which will be determined via the
IS_DEFAULT_VNET(curvnet) check (currently always true).
While here, V_irtualize a few remaining global UMA zones
used by net/netinet/netipsec networking code. While it is
not yet clear to me or anybody else whether this is the right
thing to do, at this stage this makes the code more readable,
and makes it easier to track uncollected UMA-zone-backed
objects on vnet removal. In the long run, it's quite possible
that some form of shared use of UMA zone pools among multiple
vnets should be considered.
Bump __FreeBSD_version due to changes in layout of structs
vnet_ipfw, vnet_inet and vnet_net.
Approved by: julian (mentor)
LO_CSUM_FEATURES - a bitmask of supported transmit offload features, which
will be stored in if_hwassist if IFCAP_TXCSUM is enabled, and be cleared
from mbuf packet header csum flags on transmit. (1)
LO_CSUM_SET - a bitmask of supported receive offload features, which will
be set on the mbuf packet header csum flags on transmit if IFCAP_RXCSUM
is enabled.
While here, fix SCTP offload for loopback: offer generation on the
transmit side, don't just skip validation on the receive side.
Obtained from: DragonflyBSD (1)
MFC after: 1 week
avoidance:
- Enable setting the RXCSUM and TXCSUM flags for loopback interfaces;
set both by default.
- When RXCSUM is set, flag packets sent over the loopback interface as
having checked and valid IP, UDP, TCP checksums so that higher
protocol layers won't check them.
- Always clear CSUM_{IP,UDP_TCP} checksum required flags on transmit,
as they will have gotten there as a result of TXCSUM being set.
This is done only for packets explicitly sent over the loopback, not
simulated loopback via if_simloop() due to !SIMPLEX interfaces, etc.
Note that enabling TXCSUM but not RXCSUM will lead to unhappiness, as
checksums won't be generated but will be validated.
Kris reports that this leads to significant performance improvements
in loopback benchmarking with TCP and UDP for throughput:
RXCSUM RXCSUM+TXCSUM
TCP 15% 37%
UDP 10% 74%
Update man page.
Reviewed by: sam
Tested by: kris
MFC after: 1 week
net/route.h.
Remove the hidden include of opt_route.h and net/route.h from net/vnet.h.
We need to make sure that both opt_route.h and net/route.h are included
before net/vnet.h because of the way MRT figures out the number of FIBs
from the kernel option. If we do not, we end up with the default number
of 1 when including net/vnet.h and array sizes are wrong.
This does not change the list of files which depend on opt_route.h
but we can identify them now more easily.
in the loopback and synthetic loopback code so that packets are
access control checked and relabeled. Previously, the MAC
Framework enforced that packets sent over the loopback weren't
relabeled, but this will allow policies to make explicit choices
about how and whether to relabel packets on the loopback. Also,
for SIMPLEX devices, this produces more consistent behavior for
looped back packets to the local MAC address by labeling those
packets as coming from the interface.
Discussed with: csjp
Obtained from: TrustedBSD Project
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.
For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.
Reviewed by: brooks, gnn, des, zec, imp
Sponsored by: The FreeBSD Foundation
whitespace) macros from p4/vimage branch.
Do a better job at enclosing all instantiations of globals
scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks.
De-virtualize and mark as const saorder_state_alive and
saorder_state_any arrays from ipsec code, given that they are never
updated at runtime, so virtualizing them would be pointless.
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
for virtualization.
Instead of initializing the affected global variables at instatiation,
assign initial values to them in initializer functions. As a rule,
initialization at instatiation for such variables should never be
introduced again from now on. Furthermore, enclose all instantiations
of such global variables in #ifdef VIMAGE_GLOBALS blocks.
Essentialy, this change should have zero functional impact. In the next
phase of merging network stack virtualization infrastructure from
p4/vimage branch, the new initialization methology will allow us to
switch between using global variables and their counterparts residing in
virtualization containers with minimum code churn, and in the long run
allow us to intialize multiple instances of such container structures.
Discussed at: devsummit Strassburg
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit
Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.
Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().
Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).
All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).
(*) netipsec/keysock.c did not validate depending on compile time options.
Implemented by: julian, bz, brooks, zec
Reviewed by: julian, bz, brooks, kris, rwatson, ...
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
virtualization work done by Marko Zec (zec@).
This is the first in a series of commits over the course
of the next few weeks.
Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.
We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.
Obtained from: //depot/projects/vimage-commit2/...
Reviewed by: brooks, des, ed, mav, julian,
jamie, kris, rwatson, zec, ...
(various people I forgot, different versions)
md5 (with a bit of help)
Sponsored by: NLnet Foundation, The FreeBSD Foundation
X-MFC after: never
V_Commit_Message_Reviewed_By: more people than the patch
Now that the pseudo-interface cloner has an internal list of instances,
there is no need to create a softc. The softc only contains a pointer to
the ifp, which means there is no valid reason to keep it. While there,
remove the corresponding malloc-pool.
Approved by: philip (mentor)
a private softc list is needed neither for tracking clones in general
nor for destroying all clones before the module unload -- if_clone
takes care of all that. (Note that some other interface drivers do
need a softc list to be able to scan it for their private purposes.)
parameter that can specify configuration parameters:
o rev cloner api's to add optional parameter block
o add SIOCCREATE2 that accepts parameter data
o rev vlan support to use new api (maintain old code)
Reviewed by: arch@
(1) bpf peer attaches to interface netif0
(2) Packet is received by netif0
(3) ifp->if_bpf pointer is checked and handed off to bpf
(4) bpf peer detaches from netif0 resulting in ifp->if_bpf being
initialized to NULL.
(5) ifp->if_bpf is dereferenced by bpf machinery
(6) Kaboom
This race condition likely explains the various different kernel panics
reported around sending SIGINT to tcpdump or dhclient processes. But really
this race can result in kernel panics anywhere you have frequent bpf attach
and detach operations with high packet per second load.
Summary of changes:
- Remove the bpf interface's "driverp" member
- When we attach bpf interfaces, we now set the ifp->if_bpf member to the
bpf interface structure. Once this is done, ifp->if_bpf should never be
NULL. [1]
- Introduce bpf_peers_present function, an inline operation which will do
a lockless read bpf peer list associated with the interface. It should
be noted that the bpf code will pickup the bpf_interface lock before adding
or removing bpf peers. This should serialize the access to the bpf descriptor
list, removing the race.
- Expose the bpf_if structure in bpf.h so that the bpf_peers_present function
can use it. This also removes the struct bpf_if; hack that was there.
- Adjust all consumers of the raw if_bpf structure to use bpf_peers_present
Now what happens is:
(1) Packet is received by netif0
(2) Check to see if bpf descriptor list is empty
(3) Pickup the bpf interface lock
(4) Hand packet off to process
From the attach/detach side:
(1) Pickup the bpf interface lock
(2) Add/remove from bpf descriptor list
Now that we are storing the bpf interface structure with the ifnet, there is
is no need to walk the bpf interface list to locate the correct bpf interface.
We now simply look up the interface, and initialize the pointer. This has a
nice side effect of changing a bpf interface attach operation from O(N) (where
N is the number of bpf interfaces), to O(1).
[1] From now on, we can no longer check ifp->if_bpf to tell us whether or
not we have any bpf peers that might be interested in receiving packets.
In collaboration with: sam@
MFC after: 1 month
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
a DLT_NULL interface. In particular:
1) Consistently use type u_int32_t for the header of a
DLT_NULL device - it continues to represent the address
family as always.
2) In the DLT_NULL case get bpf_movein to store the u_int32_t
in a sockaddr rather than in the mbuf, to be consistent
with all the DLT types.
3) Consequently fix a bug in bpf_movein/bpfwrite which
only permitted packets up to 4 bytes less than the MTU
to be written.
4) Fix all DLT_NULL devices to have the code required to
allow writing to their bpf devices.
5) Move the code to allow writing to if_lo from if_simloop
to looutput, because it only applies to DLT_NULL devices
but was being applied to other devices that use if_simloop
possibly incorrectly.
PR: 82157
Submitted by: Matthew Luckie <mjl@luckie.org.nz>
Approved by: re (scottl)
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.
This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.
Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.
Reviewed by: sobomax, sam
its users.
netisr_queue() now returns (0) on success and ERRNO on failure. At the
moment ENXIO (netisr queue not functional) and ENOBUFS (netisr queue full)
are supported.
Previously it would return (1) on success but the return value of IF_HANDOFF()
was interpreted wrongly and (0) was actually returned on success. Due to this
schednetisr() was never called to kick the scheduling of the isr. However this
was masked by other normal packets coming through netisr_dispatch() causing the
dequeueing of waiting packets.
PR: kern/70988
Found by: MOROHOSHI Akihiko <moro@remus.dti.ne.jp>
MFC after: 3 days
for unknown events.
A number of modules return EINVAL in this instance, and I have left
those alone for now and instead taught MOD_QUIESCE to accept this
as "didn't do anything".
- Split the code out into if_clone.[ch].
- Locked struct if_clone. [1]
- Add a per-cloner match function rather then simply matching names of
the form <name><unit> and <name>.
- Use the match function to allow creation of <interface>.<tag>
vlan interfaces. The old way is preserved unchanged!
- Also the match function to allow creation of stf(4) interfaces named
stf0, stf, or 6to4. This is the only major user visible change in
that "ifconfig stf" creates the interface stf rather then stf0 and
does not print "stf0" to stdout.
- Allow destroy functions to fail so they can refuse to delete
interfaces. Currently, we forbid the deletion of interfaces which
were created in the init function, particularly lo0, pflog0, and
pfsync0. In the case of lo0 this was a panic implementation so it
does not count as a user visiable change. :-)
- Since most interfaces do not need the new functionality, an family of
wrapper functions, ifc_simple_*(), were created to wrap old style
cloner functions.
- The IF_CLONE_INITIALIZER macro is replaced with a new incompatible
IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE
instead.
Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1]
Reviewed by: andre, mlaier
Discussed on: net
really sure why we have a softc list for if_loop, given that it
can't be unloaded, but that's an issue to revisit in the future as
corrupting the softc list would still cause panics.
Reviewed by: benno
a new bpf_mtap2 routine that does the right thing for an mbuf
and a variable-length chunk of data that should be prepended.
o while we're sweeping the drivers, use u_int32_t uniformly when
when prepending the address family (several places were assuming
sizeof(int) was 4)
o return M_ASSERTVALID to BPF_MTAP* now that all stack-allocated
mbufs have been eliminated; this may better be moved to the bpf
routines
Reviewed by: arch@ and several others
