Commit Graph

156 Commits

Author SHA1 Message Date
mjacob
adf2710156 Fix mpt_reset to try mpt_hard_reset more than once, and to try
mpt_soft_reset more than once. And to wait for MPT_DB_STATE_READY
twice. I mean, this is crucial- give the IOC a chance to get
ready.

If mpt_reset is called to reinit things, and we succeed, make
sure to re-enable interrupts. This is what has mostly led to
system lockup after having to hard reset the chip. Also, if
we think that interrupts aren't function in mpt_cam_timeout,
for goodness sake, turn them on again.

In read_cfg_header, return distinguishing errnos so the caller
can decide what's an error. It's *not* an error to fail to
read a RAID page from a non-RAID capable device like the FC929X.

Some whitespace fixes (removing spaces from ends of lines).
2006-02-28 07:44:50 +00:00
mjacob
aec0579e42 Remove the ill-considered effect of using the type definitions as
distributed by LSI-Logic. For FreeBSD, just use the posix defines
instead of trying to figure out how wide an int is. Apologies to all.
2006-02-26 22:50:14 +00:00
mjacob
fa5ef61ca8 Shorten the time for waiting for TMF commands to complete- let's
not hang the system for 5 seconds. If a TMF doesn't complete within,
oh, say 500ms, that's enough.

Put in a printout to catch mpt_recover_commands being activated with
no commands.
2006-02-26 07:46:09 +00:00
mjacob
cca241c522 a) Delay for port enable to succeed should be 30 seconds (at least) for
*both* SAS and FC, not just SAS.

b) Don't tell the chip we want it to do FIFO signalling if we actually
don't set up the address where the FIFO signal is supposed to be written
(oops).
2006-02-26 07:44:31 +00:00
mjacob
8188e4b6ef Role a microrev of the MPI Library in preparation for target mode work.
Make my portions of the license clearer.

Thank Chris Ellsworth for his support in getting a bunch of this done.
2006-02-25 07:45:54 +00:00
mjacob
1eda69983e Remove commented out qualifier to dumping a message. 2006-02-22 05:19:50 +00:00
mjacob
78626b5d46 Do initial cut of SAS HBA support. These controllers (106X) seem to support
automatically both SATA and SAS drives.  The async SAS event handling we catch
but ignore at present (so automagic attach/detach isn't hooked up yet).

Do 64 bit PCI support- we can now work on systems with > 4GB of memory.

Do large transfer support- we now can support up to reported chain depth, or
the length of our request area. We simply allocate additional request elements
when we would run out of room for chain lists.

Tested on Ultra320, FC and SAS controllers on AMD64 and i386 platforms.
There were no RAID cards available for me to regression test.

The error recovery for this driver still is pretty bad.
2006-02-11 01:35:29 +00:00
mjacob
b07370a680 Garbage collect a file that no longe is used (replaced by mpi_log_fc.h). 2006-02-08 05:58:25 +00:00
mjacob
dc2480a66b Rev MPI spec to 1.05.09 level in preparation for SAS support.
MFC after:	1 month
2006-01-21 00:29:52 +00:00
ru
522e9c2b7b Fix -Wundef. 2005-12-04 02:12:43 +00:00
kan
d5b9068359 Keep track of volumes in non-optimal state and expose a simple count
of volumes that might need administrator attention through device
specific sysctl to simplify device monitoring.

Submitted by:	Deomid Ryabkov <myself at rojer dot pp dot ru>
2005-11-15 02:38:35 +00:00
scottl
a724afd1df Remove a couple of explicit memset(0) ops that were zeroing past the end of
an allocation.  This fixes the malloc 'use after free' panic on boot that
many were seeing.  It doesn't solve the problem of the allocations being
cached and then written past their bounds later.  That will take more work.

Submitted by: kan
2005-10-08 05:16:45 +00:00
mjacob
5b4694d0bd Restore the 929X support that got nuked in merge 2005-09-11 19:58:19 +00:00
gibbs
4fed1a499c Correct attribution in clause three to address the correct copyright
holders.  The license that was approved for my changes to this driver
originally came from LSI, but the changes to the driver core are not
owned by LSI.

MFC: 1 day
2005-08-03 14:08:41 +00:00
scottl
9126bcda9d Massive overhaul of MPT Fusion driver:
o Add timeout error recovery (from a thread context to avoid
  the deferral of other critical interrupts).
o Properly recover commands across controller reset events.
o Update the driver to handle events and status codes that
  have been added to the MPI spec since the driver was
  originally written.
o Make the driver more modular to improve maintainability and
  support dynamic "personality" registration (e.g. SCSI Initiator,
  RAID, SAS, FC, etc).
o Shorten and simplify the common I/O path to improve driver
  performance.
o Add RAID volume and RAID member state/settings reporting.
o Add periodic volume resynchronization status reporting.
o Add support for sysctl tunable resync rate, member write cache
  enable, and volume transaction queue depth.

Sponsored by
----------------
Avid Technologies Inc:
	SCSI error recovery, driver re-organization, update of MPI library
	headers, portions of dynamic personality registration, and misc bug
	fixes.

Wheel Open Technologies:
	RAID event notification, RAID member pass-thru support, firmware
	upload/download support, enhanced RAID resync speed, portions
	of dynamic personality registration, and misc bug fixes.

Detailed Changes
================
mpt.c mpt_cam.c mpt_raid.c mpt_pci.c:
o Add support for personality modules.  Each module exports
  load, and unload module scope methods as well as probe, attach,
  event, reset, shutdown, and detach  per-device instance
  methods

mpt.c mpt.h mpt_pci.c:
o The driver now associates a callback function (via an
  index) with every transaction submitted to the controller.
  This allows the main interrupt handler to absolve itself
  of any knowledge of individual transaction/response types
  by simply calling the callback function "registered" for
  the transaction.  We use a callback index instead of a
  callback function pointer in each requests so we can
  properly handle responses (e.g. event notifications)
  that are not associated with a transaction.  Personality
  modules dynamically register their callbacks with the
  driver core to receive the callback index to use for their
  handlers.

o Move the interrupt handler into mpt.c.  The ISR algorithm
  is bus transport and OS independent and thus had no reason
  to be in mpt_pci.c.

o Simplify configuration message reply handling by copying
  reply frame data for the requester and storing completion
  status in the original request structure.

o Add the mpt_complete_request_chain() helper method and use
  it to implement reset handlers that must abort transactions.

o Keep track of all pending requests on the new
  requests_pending_list in the softc.

o Add default handlers to mpt.c to handle generic event
  notifications and controller reset activities.  The event
  handler code is largely the same as in the original driver.
  The reset handler is new and terminates any pending transactions
  with a status code indicating the controller needs to be
  re-initialized.

o Add some endian support to the driver.  A complete audit is
  still required for this driver to have any hope of operating
  in a big-endian environment.

o Use inttypes.h and __inline.  Come closer to being style(9)
  compliant.

o Remove extraneous use of typedefs.

o Convert request state from a strict enumeration to a series
  of flags.  This allows us to, for example, tag transactions
  that have timed-out while retaining the state that the
  transaction is still in-flight on the controller.

o Add mpt_wait_req() which allows a caller to poll or sleep
  for the completion of a request.  Use this to simplify
  and factor code out from many initialization routines.
  We also use this to sleep for task management request
  completions in our CAM timeout handler.

mpt.c:
o Correct a bug in the event handler where request structures were
  freed even if the request reply was marked as a continuation
  reply. Continuation replies indicate that the controller still owns
  the request and freeing these replies prematurely corrupted
  controller state.

o Implement firmware upload and download. On controllers that do
  not have dedicated NVRAM (as in the Sun v20/v40z), the firmware
  image is downloaded to the controller by the system BIOS. This
  image occupies precious controller RAM space until the host driver
  fetches the image, reducing the number of concurrent I/Os the
  controller can processes. The uploaded image is used to
  re-program the controller during hard reset events since the
  controller cannot fetch the firmware on its own. Implementing this
  feature allows much higher queue depths when RAID volumes
  are configured.

o Changed configuration page accessors to allow threads to sleep
  rather than busy wait for completion.

o Removed hard coded data transfer sizes from configuration page
  routines so that RAID configuration page processing is possible.

mpt_reg.h:
o Move controller register definitions into a separate file.

mpt.h:
o Re-arrange includes to allow inlined functions to be
  defined in mpt.h.

o Add reply, event, and reset handler definitions.

o Add softc fields for handling timeout and controller
  reset recovery.

mpt_cam.c:
o Move mpt_freebsd.c to mpt_cam.c.  Move all core functionality,
  such as event handling, into mpt.c leaving only CAM SCSI
  support here.

o Revamp completion handler to provide correct CAM status for
  all currently defined SCSI MPI message result codes.

o Register event and reset handlers with the MPT core.  Modify
  the event handler to notify CAM of bus reset events.  The
  controller reset handler will abort any transactions that
  have timed out.  All other pending CAM transactions are
  correctly aborted by the core driver's reset handler.

o Allocate a single request up front to perform task management
  operations.  This guarantees that we can always perform a
  TMF operation even when the controller is saturated with other
  operations.  The single request also serves as a perfect
  mechanism of guaranteeing that only a single TMF is in flight
  at a time - something that is required according to the MPT
  Fusion documentation.

o Add a helper function for issuing task management requests
  to the controller.  This is used to abort individual requests
  or perform a bus reset.

o Modify the CAM XPT_BUS_RESET ccb handler to wait for and
  properly handle the status of the bus reset task management
  frame used to reset the bus.  The previous code assumed that
  the reset request would always succeed.

o Add timeout recovery support.  When a timeout occurs, the
  timed-out request is added to a queue to be processed by
  our recovery thread and the thread is woken up.  The recovery
  thread processes timed-out command serially, attempting first
  to abort them and then falling back to a bus reset if an
  abort fails.

o Add calls to mpt_reset() to reset the controller if any
  handshake command, bus reset attempt or abort attempt
  fails due to a timeout.

o Export a secondary "bus" to CAM that exposes all volume drive
  members as pass-thru devices, allowing CAM to perform proper
  speed negotiation to hidden devices.

o Add a CAM async event handler tracking the AC_FOUND_DEVICE event.
  Use this to trigger calls to set the per-volume queue depth once
  the volume is fully registered with CAM. This is required to avoid
  hitting firmware limits on volume queue depth.  Exceeding the
  limit causes the firmware to hang.

mpt_cam.h:
o Add several helper functions for interfacing to CAM and
  performing timeout recovery.

mpt_pci.c:
o Disable interrupts on the controller before registering and
  enabling interrupt delivery to the OS.  Otherwise we risk
  receiving interrupts before the driver is ready to receive
  them.

o Make use of compatibility macros that allow the driver to
  be compiled under 4.x and 5.x.

mpt_raid.c:
o Add a per-controller instance RAID thread to perform settings
   changes and query status (minimizes CPU busy wait loops).

o Use a shutdown handler to disable "Member Write Cache Enable"
  (MWCE) setting for RAID arrays set to enable MWCE During Rebuild.

o Change reply handler function signature to allow handlers to defer
  the deletion of reply frames. Use this to allow the event reply
  handler to queue up events that need to be acked if no resources
  are available to immediately ack an event. Queued events are
  processed in mpt_free_request() where resources are freed. This
  avoids a panic on resource shortage.

o Parse and print out RAID controller capabilities during driver probe.

o Define, allocate, and maintain RAID data structures for volumes,
  hidden member physical disks and spare disks.

o Add dynamic sysctls for per-instance setting of the log level, array
  resync rate, array member cache enable, and volume queue depth.

mpt_debug.c:
o Add mpt_lprt and mpt_lprtc for printing diagnostics conditioned on
  a particular log level to aid in tracking down driver issues.

o Add mpt_decode_value() which parses the bits in an integer
  value based on a parsing table (mask, value, name string, tuples).

mpilib/*:
o Update mpi library header files to latest distribution from LSI.

Submitted by: gibbs
Approved by: re
2005-07-10 15:05:39 +00:00
nyan
0fce92f5c4 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
imp
01223e02a3 Use BUS_PROBE_DEFAULT for pci probe return value 2005-03-05 18:10:49 +00:00
joerg
c85a3e95f7 netchild's mega-patch to isolate compiler dependencies into a central
place.

This moves the dependency on GCC's and other compiler's features into
the central sys/cdefs.h file, while the individual source files can
then refer to #ifdef __COMPILER_FEATURE_FOO where they by now used to
refer to #if __GNUC__ > 3.1415 && __BARC__ <= 42.

By now, GCC and ICC (the Intel compiler) have been actively tested on
IA32 platforms by netchild.  Extension to other compilers is supposed
to be possible, of course.

Submitted by:	netchild
Reviewed by:	various developers on arch@, some time ago
2005-03-02 21:33:29 +00:00
imp
4b319958e7 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
sobomax
b131545097 Add support for FC929X, which apparently is just a PCI-X version of FC929.
MFC after:	3 days
2004-12-18 16:49:54 +00:00
obrien
39a52b107c Correct style nit in rev 1.17. 2004-08-25 17:54:19 +00:00
dwhite
aed6d1f035 Pick up changes in rev 1.8 of src/sys/dev/ic/mpt_netbsd.c from NetBSD.
Set the DMA SGL length correctly if the DMA request must be chained because
it is too large to fit in one SGL.

This should fix this driver for some Dell Precision systems.
RELENG_5 candidate.

PR:		kern/66479
Submitted by:	HITOSHI Osada <qfh02545@nifty.com>
2004-08-24 03:47:41 +00:00
obrien
fbfced34e4 Fix where my automated script blew the SCM ID format conversion. 2004-08-21 17:44:57 +00:00
stefanf
355a8ec494 Remove erroneous semicolons. 2004-07-13 16:06:19 +00:00
njl
05a1f56fc9 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
trhodes
dfcfecd6e4 These are changes to allow to use the Intel C/C++ compiler (lang/icc)
to build the kernel. It doesn't affect the operation if gcc.

Most of the changes are just adding __INTEL_COMPILER to #ifdef's, as
icc v8 may define __GNUC__ some parts may look strange but are
necessary.

Additional changes:
 - in_cksum.[ch]:
   * use a generic C version instead of the assembly version in the !gcc
     case (ASM code breaks with the optimizations icc does)
     -> no bad checksums with an icc compiled kernel
     Help from:		andre, grehan, das
     Stolen from: 	alpha version via ppc version
     The entire checksum code should IMHO be replaced with the DragonFly
     version (because it isn't guaranteed future revisions of gcc will
     include similar optimizations) as in:
        ---snip---
          Revision  Changes    Path
          1.12      +1 -0      src/sys/conf/files.i386
          1.4       +142 -558  src/sys/i386/i386/in_cksum.c
          1.5       +33 -69    src/sys/i386/include/in_cksum.h
          1.5       +2 -0      src/sys/netinet/igmp.c
          1.6       +0 -1      src/sys/netinet/in.h
          1.6       +2 -0      src/sys/netinet/ip_icmp.c

          1.4       +3 -4      src/contrib/ipfilter/ip_compat.h
          1.3       +1 -2      src/sbin/natd/icmp.c
          1.4       +0 -1      src/sbin/natd/natd.c
          1.48      +1 -0      src/sys/conf/files
          1.2       +0 -1      src/sys/conf/files.amd64
          1.13      +0 -1      src/sys/conf/files.i386
          1.5       +0 -1      src/sys/conf/files.pc98
          1.7       +1 -1      src/sys/contrib/ipfilter/netinet/fil.c
          1.10      +2 -3      src/sys/contrib/ipfilter/netinet/ip_compat.h
          1.10      +1 -1      src/sys/contrib/ipfilter/netinet/ip_fil.c
          1.7       +1 -1      src/sys/dev/netif/txp/if_txp.c
          1.7       +1 -1      src/sys/net/ip_mroute/ip_mroute.c
          1.7       +1 -2      src/sys/net/ipfw/ip_fw2.c
          1.6       +1 -2      src/sys/netinet/igmp.c
          1.4       +158 -116  src/sys/netinet/in_cksum.c
          1.6       +1 -1      src/sys/netinet/ip_gre.c
          1.7       +1 -2      src/sys/netinet/ip_icmp.c
          1.10      +1 -1      src/sys/netinet/ip_input.c
          1.10      +1 -2      src/sys/netinet/ip_output.c
          1.13      +1 -2      src/sys/netinet/tcp_input.c
          1.9       +1 -2      src/sys/netinet/tcp_output.c
          1.10      +1 -1      src/sys/netinet/tcp_subr.c
          1.10      +1 -1      src/sys/netinet/tcp_syncache.c
          1.9       +1 -2      src/sys/netinet/udp_usrreq.c

          1.5       +1 -2      src/sys/netinet6/ipsec.c
          1.5       +1 -2      src/sys/netproto/ipsec/ipsec.c
          1.5       +1 -1      src/sys/netproto/ipsec/ipsec_input.c
          1.4       +1 -2      src/sys/netproto/ipsec/ipsec_output.c

          and finally remove
            sys/i386/i386        in_cksum.c
            sys/i386/include     in_cksum.h
        ---snip---
 - endian.h:
   * DTRT in C++ mode
 - quad.h:
   * we don't use gcc v1 anymore, remove support for it
   Suggested by:	bde (long ago)
 - assym.h:
   * avoid zero-length arrays (remove dependency on a gcc specific
     feature)
     This change changes the contents of the object file, but as it's
     only used to generate some values for a header, and the generator
     knows how to handle this, there's no impact in the gcc case.
   Explained by:	bde
   Submitted by:	Marius Strobl <marius@alchemy.franken.de>
 - aicasm.c:
   * minor change to teach it about the way icc spells "-nostdinc"
   Not approved by:	gibbs (no reply to my mail)
 - bump __FreeBSD_version (lang/icc needs to know about the changes)

Incarnations of this patch survive gcc compiles since a loooong time,
I use it on my desktop. An icc compiled kernel works since Nov. 2003
(exceptions: snd_* if used as modules), it survives a build of the
entire ports collection with icc.

Parts of this commit contains suggestions or submissions from
Marius Strobl <marius@alchemy.franken.de>.

Reviewed by:	-arch
Submitted by:	netchild
2004-03-12 21:45:33 +00:00
peter
7cc77e03ae Catch a few places where NULL (pointer) was used where 0 (integer) was
expected.
2003-12-23 02:36:43 +00:00
jhb
dc11e45b68 Use PCIR_BAR(x) instead of PCIR_MAPS.
Glanced over by:	imp, gibbs
Tested by:		i386 LINT
2003-09-02 17:30:40 +00:00
obrien
c63dab466c Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
imp
f13e5622e8 Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.
2003-08-22 06:42:59 +00:00
scottl
4d495abb9d Mega busdma API commit.
Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma.  At the moment, this is used for the
asynchronous busdma_swi and callback mechanism.  Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg.  dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create().  The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.

sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms.  The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.

If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.

Reviewed by:	tmm, gibbs
2003-07-01 15:52:06 +00:00
njl
ea1ca84312 Merge common XPT_CALC_GEOMETRY functions into a single convenience function.
Devices below may experience a change in geometry.

* Due to a bug, aic(4) never used extended geometry.  Changes all drives
  >1G to now use extended translation.
* sbp(4) drives exactly 1 GB in size now no longer use extended geometry.
* umass(4) drives exactly 1 GB in size now no longer use extended geometry.

For all other controllers in this commit, this should be a no-op.

Looked over by:	scottl
2003-06-14 22:17:41 +00:00
mjacob
8b06c40d1c Add change that allows PAE to work.
Submitted by:	Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
2003-06-12 17:10:00 +00:00
mjacob
02cd566062 Update MPILIB from code received from LSI. Make changes in the rest of
the driver based upon some somewhat gratuitous name changes.
2003-06-03 17:47:48 +00:00
jhb
79b642f8ca Fix compile: the type is spelled bus_dmasync_op_t rather than
bus_dmamap_sync_t.

With hat:	re
2003-05-27 18:32:24 +00:00
scottl
f26aca7b71 Bring back bus_dmasync_op_t. It is now a typedef to an int, though the
BUS_DMASYNC_ definitions remain as before.  The does not change the ABI,
and reverts the API to be a bit more compatible and flexible.  This has
survived a full 'make universe'.

Approved by:	re (bmah)
2003-05-27 04:59:59 +00:00
mux
37f577805d I deserve a big pointy hat for having missed all those references
to bus_dmasync_op_t in my last commit.
2003-04-10 23:50:06 +00:00
obrien
7501a40564 PAGE_SIZE is unsigned on all our platforms, and is a long on some.
So cast to u_long before printing out and use a matching specifier.

Tested on:	sparc64
2003-02-23 19:49:30 +00:00
imp
cf874b345d Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
alfred
bf8e8a6e8f Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
phk
32a73ad530 Be consistent about functions being static.
Spotted by:	FlexeLint.
2002-10-16 08:48:39 +00:00
mjacob
d376bae456 Code cleanup: use mpt_prt instead of device_printf. 2002-09-24 21:33:43 +00:00
mjacob
7a5bb65c8f Parameterize MPT_MAX_REQUESTS based upon device type (FC has Global Credits
of 1024- Ultra4 256). Rename 'requests' tag to 'request_pool' for clarity.
Make sure we do correct xpt_freeze_simq/CAM_RELEASE_SIMQ if we run out
of chip resources.

MFC after:	6 days
2002-09-23 19:41:10 +00:00
mjacob
a16ca43ee6 Wads more cleanup...
In mpttimeout, call mpt_intr just on the offchance that we missed
an interrupt. We can check to see whether or not the command that
is timing out got completed.

When we *do* decide to timeout a command, set the command state to
REQ_TIMEOUT and then invoke another timeout (hz/10)- mpttimeout2.
This allows us to catch a couple cases we've seen where the command
we timed out on in fact is ready to be completed by the firmware.
In any case, it's only after mpttimeout2 is called that we actually
take down the private state and free the request itself. CAM has
been notified in mpttimeout anyway. This whole area should be redone,
but that will take 105% of my available game time for this month.

Fix a couple of missing (and not useful, at presnet) CAMLOCK_2_MPTLOCK
and MPTLOCK_2_CAMLOCK locations.

Split mpt_notify into mpt_ctlop, which handles all reply completions
that have 0x800000000 or'd into the ContextID. This function can, in
fact, call mpt_event_notify_reply, which handles the traditional
async event notifications. While we're at it, put in the extremely
important (but currently untested) code that send back an Ack to
an Event Notification (if the Event Notification is marked with
AckRequired). Note that an Ack also generates another ctlop completion,
tra la.

Fix up mpt_done substantially to try and get how we plug into CAM
correctly done. Remove bogus CAM_RELEASE_SIMQ settings.

Do some cleanups in mpt_action that are related to speed negotiation
for Ultra4 cards. This is an area that is still quite fragile and
worrisome as config data being read back often doesn't make sense or
jibe with the documentation.

At any rate, after these changes were done, I was finally able to
get Lars Eggert's dual 320M disk system to stay up under load all
weekend- hopefully we're in good enough for now shape.

MFC after:	1 week
2002-09-23 05:25:59 +00:00
mjacob
8d27c78b06 Recognize the single channel 2Gb card (FC919)- thanks to LSI Logic for
pointing this out.

In mpt_intr, don't try and pop a reply queue element out *unless*
the interrupt status says you might have one.

MFC after:	1 week
2002-09-23 05:16:00 +00:00
mjacob
8a5d5158ac We do not need to expose mpt_notify outside of mpt_freebsd.c.
MFC after:	1 week
2002-09-23 05:14:38 +00:00
mjacob
2e37a126e1 When freeing a request, zero out the sequence number.
Define the CFG_DAGA_OFF offset as 128 bytes instead of 40- gives us
a more reasonable headroom.

When reading a config page, zero out the entire request area- not just
the length of the request. This is because we cleverly (cheezily) return
configuration data back into the allocated request area, so it's nice
to make sure we start with a clean area to write on.

MFC after:	1 week
2002-09-23 05:14:02 +00:00
mjacob
5dc5eb8343 Don't do transition locking (i.e., CAM->MPT->CAM)- Peter claimed that ia64
chokes the chicken with this.

Submitted by:	wemm@freebsd.org
2002-09-03 02:18:21 +00:00
mjacob
c4f4388714 Fix things so that:
a) we don't believe what the board tells us all the time (if the BIOS
hasn't run, port page 2 and port page 0 tend to be garbage)

b) add the missing code to set parameters for the SPI cards.

MFC after:	0 days
2002-09-01 23:07:09 +00:00
mjacob
f058ad6036 Sigh. Ken Merry convinced me that my attempts to DTRT were wrong.
Replace dual copyright with a plain BSD style copyright assigned
to LSI Logic. This is still within the intents of express consent
from LSI.

MFC after:	2 days
2002-08-30 03:36:50 +00:00
mjacob
5cacf8a62b Add 909A PCI id.
MFC after:	2 days
2002-08-30 02:35:31 +00:00
mjacob
18d59e7241 Add an additional copyright (with the express consent of LSI Logic) that
specifically allows for (via 'BSD Style' licensing) source && binary
redistribution.

Pointy hat to: Matt, for not getting this done ahead of time.

MFC after: 2 days
2002-08-30 02:34:19 +00:00
mjacob
907806e8e1 Do some minor cleanups found during backport to RELENG_4. 2002-08-23 06:56:31 +00:00
mjacob
f862e4d733 Pick a cleaner method (and put in a separate function) for finding
the peer device on a dual board.
2002-08-23 06:56:08 +00:00
mjacob
725cb72df3 A chunk of cleanup, both stylistic and substantive.
We now also read configuration information for the SCSI cards- this allows
us to try and say what the speed settings now are.

Start, but not yet complete, the process of reorgs && #defines so that we
can backport to RELENG_4 pretty soon.
2002-08-20 23:04:08 +00:00
mjacob
d8202a09a4 Add support for the LSI-Logic Fusion/MP architecture.
This is an architecture that present a thing message passing interface
to the OS. You can query as to how many ports and what kind are attached
and enable them and so on.

A less grand view is that this is just another way to package SCSI (SPI or
FC) and FC-IP into a one-driver interface set.

This driver support the following hardware:

LSI FC909:	Single channel, 1Gbps, Fibre Channel (FC-SCSI only)
LSI FC929:	Dual Channel, 1-2Gbps, Fibre Channel (FC-SCSI only)
LSI 53c1020:	Single Channel, Ultra4 (320M) (Untested)
LSI 53c1030:	Dual Channel, Ultra4 (320M)

Currently it's in fair shape, but expect a lot of changes over the
next few weeks as it stabilizes.

Credits:

The driver is mostly from some folks from Jeff Roberson's company- I've
been slowly migrating it to broader support that I it came to me as.

The hardware used in developing support came from:

	FC909: LSI-Logic, Advansys (now Connetix)
	FC929: LSI-Logic
	53c1030: Antares Microsystems (they make a very fine board!)

MFC after:	3 weeks
2002-08-11 23:34:20 +00:00