/dev/usb. The actions are specified in the file /etc/usbd.conf.
usbd.c:
- Add event queue (/dev/usb) handling.
- Add comments
- Clean up code some more
usbd.8:
- Update manpage for the new command line flags
- Remove a duplicate FreeBSD tag from it).
usbd.conf, usbd.conf.5, Makefile:
- Add the usbd.conf configuration file and the man page for it.
NOTE: MAKEDEV already creates the /dev/usb device tree node, no change
needed there anymore.
inserting a new item. Without this, it's possible to
mis-insert quite badly... but only by as much as the load of
the first item, which is almost always 1 second.
Initialise the timerservice with `restart' set if we're inserting
at the start of the list.
- remove the use of NDEV. It is confusing. MAXUSBDEV should do.
- add some comments.
- add more explanation in usage()
- change the timeout value for undetected USB devices from 300 to 30
seconds. I don't think anyone wants to wait 5 minutes for broken
devices to show up. The overhead CPU wise is very little.
- print 'no controllers found' as a fatal error.
- remove inclusion of malloc.h. It's unused.
accept(2). This is a not really problem on -current as the accept race
is fixed, however it is a MFC candidate for -stable.
This could possibly be slightly more efficient and leave the listening
socket permanently in non-blocking mode, but I wasn't certain that I
could catch all the stream/wait (not nowait) mode implications.
(2) Check for ENOENT when checking for /var/db/mountdtab
(3) Remove a signal handler that called broken functions.
(4) Remove the broken functions.
Submitted by: Martin Blapp <mb@imp.ch>
Reviewed by: bde (1), billf ([234])
option and add explicit option to bind to the wildcard address. The
default is to bind to the wildcard address when no -h option has been
specified and thus backwards compatibility is maintained.
PR: kern/13049
Reviewed by: David Malone <dwmalone@maths.tcd.ie>
Submitted by: Matt Dillon <dillon@freebsd.org>, David Malone <dwmalone@maths.tcd.ie>
doing a HangupDone(). The HangupDone() may fuel
bundle_CleanDatalinks(), and if so, the bogus
UpdateSet() ends up select()ing on a closed
descriptor.....
Change the main `do/while' loop to a `for' loop so
that any `continue's do the bundle_CleanDatalinks()
& bundle_IsDead() bit.
repquota reports softlimits, hardlimits and ``used'' field
incorrectly, namely those numbers get wrapped modulo 4Gbytes.
PR: bin/8164
Submitted by: Anton Berezin <tobez@plab.ku.dk>
directory than the default one. If the option is not given, then the
output of config is exactly as before. Only when an alternate output
directory has been specified will config modify its behavior.
Additional changed:
o Remove the now conflicting and unused NODEV define. It
conflicts with NODEV in sys/param.h.
o Rename the now conflicting MACHINE token to ARCH. It
conflicts with MACHINE in sys/param.h.
o Fix some easy style bugs.
o Fix some easy grammar bugs in the manpage.
Approved by: peter, archie
like "pw usermod <name> -m" to work for non-local NIS users; since no attempt
is made to update the password entry, the home directory will be created and
populated as expected without error.
instead of a boolean. This replicated through he front-end sub-functions
relating to add, delete, modify entries in passwd & group files
Errno is now preserved so output of errc()/warnc() will be less obfuscated
by subsequent errors when reporting the problem.
Add more intelligent error handling when attempting to modify/delete NIS
entries with no corresponding local database entry.
[MFC to stable in a couple of weeks to keep both in sync]
PPPoUDP connection.
(*) This is as correct as ftp and uucp wtmp entries are - that is,
multiple concurrent connections will not record enough information
in wtmp to tell last(1) who was logged in for how long.
Been in production for 3 years now. Gives Instant Frame relay to if_sr
and if_ar drivers, and PPPOE support soon. See:
ftp://ftp.whistle.com/pub/archie/netgraph/index.html
for on-line manual pages.
Reviewed by: Doug Rabson (dfr@freebsd.org)
Obtained from: Whistle CVS tree
re-open a device. The fact that we're in NETWORK phase indicates
that there are other links in DATALINK_OPEN and that we don't want
to stop using them.
Warn about -alias being depricated (but still allow it).
Don't moan twice about failing to open any tun device.
Fix a diagnostic and add the -quiet switch to the usage message.
that the first timer ends up doing a timer_Stop() on the second.
When this happens, remove the timer from the pending list so that
we still call any subsequent timers.
This bug has been here for several years, but has only been tickled
recently with my device layering changes.
With enormous thanks for the perseverance of: Ruslan Ermilov <ru@ucb.crimea.ua>
in struct cstate rather than copying the stored header slot into a
potentially mis-aligned buffer then trying to update the ip_sum
without causing an exception on non-i386 hardware.
I've never been able to reproduce this problem, but it has been
reported by many people... besides, the code is now a bit cleaner.
Testing & patience by: Anthony Solovjoff <asolovjoff@hotmail.com>
Made mount more userfriendly (bad slashes are now filtered out)
and we remove in mount_nfs trailing slashes if there are any.
Fixed mount_xxx binarys to resolve with realpath(3)
the mountpoint.
Translate the deprecated nfs-syntax with '@' to ':' .
The ':' syntax has now precedence, but '@' still works.
Notify the user that the '@' syntax should not be used.
PR: 7846
PR: 13692
Submitted by: Martin Blapp <mb@imp.ch>
Reviewed by: phk
carrier instead so that we can set up our carrier detect
timer and eventually notice when we lose carrier.
Honour the script.run value when coming out of carrier state.
PR: 14145
request.
Fix some uninitialized warnings and a style bug while we are here.
Problem still exists where a failed umount can be misreported as
success.
Submitted by: Martin Blapp <mb@imp.ch>
-----------------------------
Most of the userland changes are in libc. For both the alpha
and the i386 setjmp has been changed to accomodate for the
new sigset_t. Internally, libc is mostly rewritten to use the
new syscalls. The exception is in compat-43/sigcompat.c
The POSIX thread library has also been rewritten to use the
new sigset_t. Except, that it currently only handles NSIG
signals instead of the maximum _SIG_MAXSIG. This should not
be a problem because current applications don't use any
signals higher than NSIG.
There are version bumps for the following libraries:
libdialog
libreadline
libc
libc_r
libedit
libftpio
libss
These libraries either a) have one of the modified structures
visible in the interface, or b) use sigset_t internally and
may cause breakage if new binaries are used against libraries
that don't have the sigset_t change. This not an immediate
issue, but will be as soon as applications start using the
new range to its fullest.
NOTE: libncurses already had an version bump and has not been
given one now.
NOTE: doscmd is a real casualty and has been disconnected for
the moment. Reconnection will eventually happen after
doscmd has been fixed. I'm aware that being the last one
to touch it, I'm automaticly promoted to being maintainer.
According to good taste this means that I will receive a
badge which either will be glued or mechanically stapled,
drilled or otherwise violently forced onto me :-)
NOTE: pcvt/vttest cannot be compiled with -traditional. The
change cause sys/types to be included along the way which
contains the const and volatile modifiers. I don't consider
this a solution, but more a workaround.
for the AN985 "Centaur" chip, which is apparently the next genetation
of the "Comet." The AN985 is also a tulip clone and is similar to the
AL981 except that it uses a 99C66 EEPROM and a serial MII interface
(instead of direct access to the PHY registers).
Also updated various documentation to mention the AN985 and created
a loadable module.
I don't think there are any cards that use this chip on the market yet:
the datasheet I got from ADMtek has boxes with big X's in them where the
diagrams should be, and the sample boards I got have chips without any
artwork on them.
size != 512 that are configured without a label. The bug should only
have effected swap-backed VN mounts without a label.
Add several major features to VN. In the kernel we add a swap
pre-reservation capability, which can be used to guarentee seek
consistency for swap-backed VN nodes. This also incidently allows
a swap-backed VN filesystem to be recovered after a crash in some
cases (if the same swap blocks happen to be reserved).
We also add a number of new options to vnconfig which do the work
of pre-zeroing or creating/truncating/extending a file which greatly
simplifies using VN in a file-backed configuration.
Add FreeBSD CVS label to sys/sys/vnioctl.h, as well as a new ioctl
flag for the swap pre-reservation feature.
Reviewed by: Alan Cox <alc@cs.rice.edu>, David Greenman <dg@root.com>
