Commit Graph

20 Commits

Author SHA1 Message Date
Adrian Chadd
b56fed3da0 Use separate mutex for wv_bcbuf and wv_boff structures.
PR:		kern/197143
Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
2015-03-15 20:53:46 +00:00
Adrian Chadd
d036bb20e3 Add prefixes to field names.
PR:		kern/197143
Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
2015-03-15 20:52:47 +00:00
Adrian Chadd
6f8421f8a5 Use ieee80211_beacon_update() for dynamic beacon contents.
PR:		kern/197143
Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
2015-03-15 20:51:56 +00:00
Adrian Chadd
565248e2ad Use a static buffer in wpi_cmd - rather than alloc/free'ing the
beacon buffer frequently.

PR:		kern/197143
Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
2015-03-15 20:50:23 +00:00
Adrian Chadd
4eaf2ee348 wpi_tx_done() shouldn't wait for wpi_start().
PR:		kern/197143
Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
2015-03-15 20:45:43 +00:00
Adrian Chadd
7964dd56b7 Add node table lock - addresses LOR in wpi_node_free().
PR:		kern/197143
Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
2015-03-15 20:44:52 +00:00
Adrian Chadd
ff62db1d9d Eliminate the WPI_FLAG_BUSY flag.
PR:		kern/197143
Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
2015-03-15 20:40:59 +00:00
Adrian Chadd
63f576999e Add separate lock for TX queues.
PR:		kern/197143
Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
2015-03-15 20:40:11 +00:00
Adrian Chadd
eca2eb395c Replace kernel unit allocator with local set of functions.
PR:		kern/197143
Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
2015-03-15 20:34:26 +00:00
Adrian Chadd
a5e093b0e0 Wrap cast to (struct wpi_node *) into WPI_NODE macros
PR:		kern/197143
Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
2015-03-15 20:23:58 +00:00
Adrian Chadd
bb086d4e83 Fix indentation - non-functional change.
PR:		kern/197143
Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
2015-03-15 20:19:54 +00:00
Adrian Chadd
692ad7ca94 Big wpi(4) overhaul! Not by me!
This is a sync against iwn(4) and openbsd.

- Add power management support;
- Add background scanning support;
- Fix few LORs;
- Handle rfkill switch state changes properly;
- Fix recovering after firmware failure;
- Add more error checking;
- Cleanup & disable by default debug output;
- Update macroses names;
- Other various fixes;
- Add IBSS support:
  - don't set data_ntries field for management frames;
- Add AHDEMO support:
    - fix padding;
- Sync eeprom functions;
- Use CMD_RXON_ASSOC where possible;
- Enable HW CCMP encryption/decryption for pairwise keys;
- Fix filter flags for CMD_RXON.

Tested (by submitter) - iwn 3945 NIC.  I have one somewhere; I'll
validate this later on and revert it if it's a problem.

Thanks!

PR:		197143
Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
2015-02-07 23:11:38 +00:00
Marius Strobl
da67681dd3 - Probe with BUS_PROBE_DEFAULT instead of 0.
- Nuke code setting PCI_POWERSTATE_D0; pci(4) already does that for type 0
  devices.
- There's no need to keep track of resource IDs.
- Quiesce the interrupt before actually detaching.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers.

MFC after:	1 week
2013-12-29 23:46:59 +00:00
Rui Paulo
b6108616ac net80211 rate control framework (net80211 ratectl).
This framework allows drivers to abstract the rate control algorithm and
just feed the framework with the usable parameters. The rate control
framework will now deal with passing the parameters to the selected
algorithm. Right now we have AMRR (the default) and RSSADAPT but there's
no way to select one with ifconfig, yet.
The objective is to have more rate control algorithms in the net80211
stack so all drivers[0] can use it. Ideally, we'll have the well-known
sample rate control algorithm in the net80211 at some point so all
drivers can use it (not just ath).

[0] all drivers that do rate control in software, that is.

Reviewed by:	bschmidt, thompsa, weyongo
MFC after:	1 months
2010-04-07 15:29:13 +00:00
Sam Leffler
5463c4a485 Overhaul monitor mode handling:
o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO
  and remove explicit bpf support from wireless drivers; drivers now
  use ieee80211_radiotap_attach to setup shared data structures that
  hold the radiotap header for each packet tx/rx
o remove rx timestamp from the rx path; it was used only by the tdma support
  for debugging and was mostly useless due to it being 32-bits and mostly
  unavailable
o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and
  per-com state when there are active taps
o track the number of monitor mode vaps
o use bpf tap and monitor mode vap state to decide when to collect radiotap
  state and dispatch frames; drivers no longer explicitly directly check
  bpf state or use bpf calls to tap frames
o handle radiotap state updates on channel change in net80211; drivers
  should not do this (unless they bypass net80211 which is almost always
  a mistake)
o update various drivers to be more consistent/correct in handling radiotap
o update ral to include TSF in radiotap'd frames
o add promisc mode callback to wi

Reviewed by:	cbzimmer, rpaulo, thompsa
2009-05-20 20:00:40 +00:00
Andrew Thompson
5efea30f03 Create a taskqueue for each wireless interface which provides a serialised
sleepable context for net80211 driver callbacks. This removes the need for USB
and firmware based drivers to roll their own code to defer the chip programming
for state changes, scan requests, channel changes and mcast/promisc updates.
When a driver callback completes the hardware state is now guaranteed to have
been updated and is in sync with net80211 layer.

This nukes around 1300 lines of code from the wireless device drivers making
them more readable and less race prone.

The net80211 layer has been updated as follows
 - all state/channel changes are serialised on the taskqueue.
 - ieee80211_new_state() always queues and can now be called from any context
 - scanning runs from a single taskq function and executes to completion. driver
   callbacks are synchronous so the channel, phy mode and rx filters are
   guaranteed to be set in hardware before probe request frames are
   transmitted.

Help and contributions from Sam Leffler.

Reviewed by:	sam
2009-05-02 15:14:18 +00:00
Andrew Thompson
6d107591b2 The beacon miss notification must run without locks held has it calls back into
wpi_raw_xmit();
2008-05-16 04:15:54 +00:00
Sam Leffler
b032f27c36 Multi-bss (aka vap) support for 802.11 devices.
Note this includes changes to all drivers and moves some device firmware
loading to use firmware(9) and a separate module (e.g. ral).  Also there
no longer are separate wlan_scan* modules; this functionality is now
bundled into the wlan module.

Supported by:	Hobnob and Marvell
Reviewed by:	many
Obtained from:	Atheros (some bits)
2008-04-20 20:35:46 +00:00
Andrew Thompson
82f1b132a4 Update wpi(4) with stability fixes
- remove second taskqueue
 - busdma 16k alignment workaround
 - use busdma instead of external mbuf storage on Rx
 - locking fixes
 - net80211 state change fixes
 - improve scanning reliability
 - improve radio hw switch interaction
 - consolidate callouts

Parts obtained from:	benjsc, sam
Tested by:		many
2008-03-10 23:16:48 +00:00
Benjamin Close
6607310b74 Initial Import of wpi driver based on p4 changeset 128641.
This import includes:
   o wpi Wireless driver for the Intel 3945 Wireless Lan Controller (802.11abg) (sys/dev/wpi)
   o Intel firmware revision 2.14.4 & associated LICENSE (sys/dev/contrib/wpi, sys/contrib/dev/wpi/LICENSE)
   o wpifw Firmware driver (sys/modules/wpifw)

Approved by: mlaier, sam (co-mentors)
2007-11-05 11:47:19 +00:00