it's options COMPAT_OLDISA and COMPAT_OLDPCI. This is meant to be a
fairly strong incentive to update the older drivers to newbus, but doesn't
(quite) leave anybody hanging with no hardware support. I was talking with
a few folks and I was encouraged to simply break or disable the shims but
that was a bit too drastic for my liking.
prevent a page fault if the card is ejected while BPF is in use. This
could happen if DHCP or tcpdump was in use on that interface during
ejection. Other drivers may also require this modification.
Reviewed by: wes
new-bus Olicom driver, previously known as "ol". The new
driver unfortunately does not support ISA cards yet.
o Update the microcode files, interface library and include files
to the latest PowerMACH works version. Force even byte alignment
of adapter microcode.
o Roll in some of the patches from Nikolai Saoukh <nms@ethereal.ru>.
- Properly keep track of resources (I/O ports and irq).
- Use bus_space_read/write() to access the ports.
- Add PnP IDs.
- Add a watchdog timer in case interrupts are lost (experimental).
- Add `detach' function (experimental).
fixes some namespace pollution in general and breakage of modules that
aren't in the sys tree in particular (<machine/ipl.h> includes further
headers that aren't installed under /usr/include).
Reimplemented SPLASSERT() so that it is more machine independent and
less bloated and doesn't require the <machine/ipl.h> include spam.
In particular, don't assume that `cpl' can be printed using %08x
format. The alpha arch doesn't even have `cpl'. SPLASSERT() was
harmless on alphas because it isn't actually used.
chipset to be probed & attached on newer Dell PowerEdge servers, such as
the 2400 and 4400.
Reviewed by: dfr, msmith, jlemon
Tested by: hnokubi@yyy.or.jp (in a previous incantation)
Approved by: jkh
Also update wicontrol to enable/disable encryption, set WEP keys and set the
TX key index. Silver cards only have 40-bit keys. This is something of a quick
hack, but it works well enough for me to commit this from the LinuxWorld
exhibit floor.
The WEP support only shows up if you have a card that supports it.
Would have been approved by: jkh, if he hadn't wandered off somewhere
Approved in his place by: msmith, who's standing right here
be safe enough to recommend for working around the problem with CHS mode
normally being limited to 65536*16*63 sectors.
Fixed bitrot in related debugging code.
Fixed related style bugs.
Removed another vestige of bad144 support.
actually used it since the only device that specified it (vga0) was marked
as "FLG_INVISIBLE" in userconfig and therefore never shown.
Suggested by: bde
are using an old unconverted driver. Most (if not all) of the drivers
for common hardware are newbus these days. However, we don't want
to encourage people to take the easy way out and write new drivers
using the shims. This is just passive "encouragement".
Reviewed by: phk
subr_diskmbr.c:
Don't "helpfully" enlarge our idea of the disk size to cover all the
primary slices. Instead, truncate or discard slices that don't seem
to be on the disk. The enlargement was a hack for disks that don't
report their size (e.g., MFM disks). It is just wrong in general.
wd.c:
In CHS mode, limit the disk size so that cylinder numbers >= 65536
cannot occur. This normally only affects disks larger than 33.8GB.
CHS mode accesses to addresses above the limit are now properly broken
(an error is returned instead of garbage for reads and disk corruption
for writes).
PR: 15611
Reviewed by: readers of freebsd-bugs did not respond to a request
for review
same object file (atapi-cd.o) as the ata drivers. I'd have called it
wcd.[ch], but there's already one of those in the Attic that we can't
clobber - the good names are taken.
Fix building so that it can be compiled into LINT alongside ata.
Requested by: bde
isa_device->id_ri_flags and RI_FAST were not implemented and did nothing.
The two drivers that were mistakenly thinking this was working were
cy.c and loran.c - these should be converted to newbus.
GC (garbage collect) isa_device->id_alive
GC userconfig.c references to isa_device->id_scsiid (!).
unless both "option INVARIANTS" and "options INVARIANT_SUPPORT"
are defined in the kernel's config(8) file.
SPLASSERT(expression, msg) used KASSERT to check that the
expression is true, panic()ing the kernel otherwise.
Approved by: jkh
Reviewed by: jdp, dfr, phk, eivind and green
Collect together the components of several drivers and export eisa from
the i386-only area (It's not, it's on some alphas too). The code hasn't
been updated to work on the Alpha yet, but that can come later.
Repository copies were done a while ago.
Moving these now keeps them in consistant place across the 4.x series
as the newbusification progresses.
Submitted by: mdodd
things like sound cards can get called "Parallel port". A note to the
unwary; the isa-pnp devices in the system are probed like PCI - each
device ID is passed to *all* isa probe routines to find the best match.
If the driver is not prepared to deal with this, it must abort in this
scenario or it will try and claim all PnP devices.
Note1: the correct interrupt level is invoked correctly for each driver.
For this purpose, drivers request the bus before being able to
call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus
core when drivers release it. Thus, when BUS_SETUP_INTR is called
at ppbus driver level, ppbus checks that the caller owns the
bus and stores the interrupt handler cookie (in order to unregister
it later).
Printing is impossible while plip link is up is still TRUE.
vpo (ZIP driver) and lpt are make in such a way that
using the ZIP and printing concurrently is permitted is also TRUE.
Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET
is now needed to force chipset detection. If set, the flags 0x40
still avoid detection at boot.
Port of the pcf(4) driver to the newbus system (was previously directly
connected to the rootbus and attached by a bogus pcf_isa_probe function).
