itself to an associated PCI device if it exists. It is little bit hackish
but it should fix build without frame buffer driver since r198964.
Fix some style(9) nits in vga_isa.c while we are here.
if_watchdog/if_timer to NULL/0 when initializing an ifnet. if_alloc()
sets those members to NULL/0 already.
(Missed this driver in the earlier commit.)
showing the message creates other side-effects. Remove the Rx
FIFO overrun message in interrupt handler. msk(4) should recover
from the FIFO overruns without any user intervention. Users can
still check the Rx FIFO overrun counter from MAC MIB statistics
maintained in driver(dev.msk.0.stats.rx.overflows).
send an ACK right away if data was drained from a TCP socket that had
previously advertised a zero-sized window. The current code requires the
receive window to be exactly zero for this to kick in. If window scaling is
enabled and the window is smaller than the scale, then the effective window
that is advertised is zero. However, in that case the zero-sized window
handling is not enabled because the window is not exactly zero. The fix
changes the code to check the raw window value against zero.
Reviewed by: bz
MFC after: 1 week
Many operating systems also provide MAP_ANONYMOUS. It's not hard to
support this ourselves, we'd better add it to make it more likely for
applications to work out of the box.
Reviewed by: alc (mman.h)
- Disallow setting of flags not supported by ext2fs.
- Map EXT2_APPEND_FL to SF_APPEND.
- Map EXT2_IMMUTABLE_FL to SF_IMMUTABLE.
- Map EXT2_NODUMP_FL to UF_NODUMP.
Note that ext2fs doesn't support user settable append and immutable flags.
EXT2_NODUMP_FL is an user settable flag also on Linux.
PR: kern/122047
Reported by: Ighighi
Submitted by: Aditya Sarawgi (original version)
Reviewed by: bde
Approved by: trasz (mentor)
for buffer allocation. If driver know we are out of Rx buffers let
controller stop. This should fix panic when interface is run even
if it had no configured Rx buffers.
and Rx DMA tag separately. Previously it used a common mbuf DMA tag
for both Tx and Rx path but Rx buffer(standard ring case) should
have a single DMA segment and maximum buffer size of the segment
should be less than or equal to MCLBYTES. This change also make it
possible to add TSO with minor changes.
bge_newbuf_std still has a bug for handling dma map load failure
under high network load. Just reusing mbuf is not enough as driver
already unloaded the dma map of the mbuf. Graceful recovery needs
more work.
Ideally we can just update dma address part of a Rx descriptor
because the controller never overwrite the Rx descriptor. This
requires some Rx initialization code changes and it would be done
later after fixing other incorrect bus_dma(9) usages.
- Remove CAM_PERIPH_POLLED flag. It is broken by design. Polling can't be
periph flag. May be SIM, may be CCB, but now it works fine just without it.
- Remove check unused for at least five years. If we will ever have non-BIO
devices in CAM, this check is smallest of what we will need.
- If several controllers complete requests same time, call swi_sched()
only once.
- Add support for sector size > 512 bytes and physical sector of several
logical sectors, introduced by ATA-7 specification.
- Remove some obsoleted code.
for the permission to create subdirectory (ACE4_ADD_SUBDIRECTORY)), it doesn't
really make sense for VOP_ACCESS(9). Also, many VOP_ACCESS(9) implementations
don't expect that. Make sure we don't confuse them.
ocassions, memory barriers semantic is not honoured by the hardware
itself. As a result, some random breakage can happen in uninvestigable
ways (for further explanation see at the content of the commit itself).
As long as just a specific familly is bugged of an entire architecture
is broken, a complete fix-up is impratical without harming to some
extents the other correct cases.
Considering that (and considering the frequency of the bug exposure)
just print out a warning message if the affected machine is identified.
Pointed out by: Samy Al Bahra <sbahra at repnop dot org>
Help on wordings by: jeff
MFC: 3 days
Normally msgbufp is locked using Giant. Switch it to use the
msgbuf_lock. Instead of changing the tsleep() calls to msleep(), just
convert it to condvar(9).
In my opinion the locking around msgbuf_peekbytes() still remains
questionable. It looks like locks are dropped while performing copies of
multiple blocks to userspace, which may cause the msgbuf to be reset in
the mean time. At least getting it underneath from Giant should make it
a little easier for us to figure out how to solve that.
Reminded by: rdivacky
- VBE 3.0 says palette format resets to 6-bit mode when video mode changes.
We simply set 8-bit mode when we switch modes if the adapter supports it.
- VBE 3.0 also says if the mode is not VGA compatible, we must use VBE
function to save/restore palette. Otherwise, VGA function may be used.
Thus, reinstate the save/load palette functions only for non-VGA compatible
modes regardless of its palette format.
- Let vesa(4) set VESA modes even if vga(4) claims to support it.
- Reset default palette if VESA pixel mode is set initially.
- Fix more style nits.
- Tear down the interrupt handler before killing the worker thread.
- Do geom withering as GEOM event to avoid acquiring the GEOM topology
lock under Giant.
PR: kern/104079
Reviewed by: joerg
Approved by: trasz (mentor)
This improvements aims for avoiding further cache-misses in scheduler
specific functions which need to keep track of average thread running
time and further locking in places setting for this flag.
Reported by: jeff (originally), kris (currently)
Reviewed by: jhb
Tested by: Giuseppe Cocomazzi <sbudella at email dot it>
