more stack hungry as compared to the old one that my RX2660 gets
a machine check and spontaneously reboots at the time the USB DVD
drive is found and attached to CAM as a mass storage device. This
doesn't happen always, but definitely varies per kernel build.
Likewise when using a 128-byte printf buffer. The additional 128
bytes that printf needs seems to be enough to have the memory stack
and register stack collide and causing a machine check.
Thus: Bump KSTACK_PAGES from 4 to 5.
* iwnfw has now been split into individual modules so autoloading of
firmware module(s) does work again.
* Changes have been made to RUN -> AUTH transition, this should fix the
issue reported by Glen and others.
* Brandon reported issues in iwn_cmd() with large commands, those have
been fixed to.
* DEAUTH is now handled correctly.
Submitted by: Bernhard Schmidt <bschmidt at techwires.net>
Have the early USB takeover enabled for i386 and amd64
by default.
This also avoids a panic on PowerPC where the resource
isn't released properly and we find a busy resource
when the USB host controller wants to allocate it...
- Teach it to read gang blocks. (essentially untested)
If you see "ZFS: gang block detected!", please let
me know, so we can either remove the printf if it
works, or fix it if it doesn't.
- If multiple partitions exist on a disk, probe them all.
We also need to reset dsk->start to 0 to read the right
sector here.
- With GPT, we can have 128 partitions.
- If the bootfs property has ever been set on a pool
it seems that it never goes away. zpool won't allow
you to add to the pool with the bootfs property set.
However, if you clear the property back to default
we end up getting 0 for the object number and read
a bogus block pointer and fail to boot.
- Fix some error printfs. The printf in the loader is
only capable of c,s and u formats.
- Teach printf how to display %llu
Reviewed by: dfr, jhb
MFC after: 2 weeks
function may not work properly if we don't. Turn off hardware cursor as
vesa_set_mode() does.
- Add VBE 3.0 specific fields in VESA mode structure and pack it. Note
the padding is 190 bytes although VBE 3.0 says 189 bytes. It must be wrong
because the size of structure becomes 255 bytes and the specification says
it must be 256 bytes in total. In fact, an example code in the spec. does
it right, though. While we are at it, fix some i386-isms.
- Remove state buffer size limitation. It is no longer necessary since
sys/compat/x86bios/x86bios.c r198251.
- Move int 0x10 vector test into vesa_bios_post() as we always do it anyway.
td_name[] arrays are actually MAXCOMLEN + 1 in size and a few places that
created shadow copies of these arrays were just using MAXCOMLEN.
- Prefer using sizeof() of an array type to explicit constants for the
array length in a few places.
- Ensure that all of p_comm[] and td_name[] is always zero'd during
execve() to guard against any possible information leaks. Previously
trailing garbage in p_comm[] could be leaked to userland in ktrace
record headers via td_name[].
Reviewed by: bde
only used in real mode and keeping them mapped only serves to make NULL
a valid address, which results in silent NULL pointer deferences.
Suggested by: Patrick Kerharo
Obtained from: projects/ppc64
at least on my Xserve, getting the decrementer and timebase on APs to tick
requires setting up a clock chip over I2C, which is not yet done.
While here, correct the 64-bit tlbie function to set the CPU to 64-bit
mode correctly.
Hardware donated by: grehan
sooner so it is always valid when a driver's identify routine is
called. Previously, new-bus would attempt to create the devclass for
a newly loaded driver in two separate places, once in
devclass_add_driver(), and again after devclass_add_driver() returned
in driver_module_handler(). Only the second lookup attempted to set a
device class' parent and set the devclass_t pointer specified in the
DRIVER_MODULE() macro. However, by the time it was executed, the
driver was already added to existing instances of the parent driver at
which point in time the new driver's identify routine would have been
invoked. The fix is to merge the two attempts and only create the
devclass once in devclass_add_driver() including setting the
devclass_t pointer passed to DRIVER_MODULE() before the driver is
added to any existing bus devices.
Reported by: avg
Reviewed by: imp
MFC after: 2 weeks
the memory or D-cache, depending on the semantics of the platform.
vm_sync_icache() is basically a wrapper around pmap_sync_icache(),
that translates the vm_map_t argumument to pmap_t.
o Introduce pmap_sync_icache() to all PMAP implementation. For powerpc
it replaces the pmap_page_executable() function, added to solve
the I-cache problem in uiomove_fromphys().
o In proc_rwmem() call vm_sync_icache() when writing to a page that
has execute permissions. This assures that when breakpoints are
written, the I-cache will be coherent and the process will actually
hit the breakpoint.
o This also fixes the Book-E PMAP implementation that was missing
necessary locking while trying to deal with the I-cache coherency
in pmap_enter() (read: mmu_booke_enter_locked).
The key property of this change is that the I-cache is made coherent
*after* writes have been done. Doing it in the PMAP layer when adding
or changing a mapping means that the I-cache is made coherent *before*
any writes happen. The difference is key when the I-cache prefetches.
Separate CAM_DEV_IDENTIFY_DATA_VALID flag from CAM_DEV_INQUIRY_DATA_VALID.
Add workaround for very old devices without support for mode setting.
Add some PATA bus scanning support.
Remove some SCSIsms.
Add support for PIO-only devices.
Fix maxio values and 256 sectors transactions for 28bits commands.
Implement periodic ordered commands insertion, sames as da driver does.
Remove some SCSIsms.
splitting in bce(4) instead of (ab)using ZERO_COPY_SOCKETS that was not
propagated into if_bce.c anyway. It is disabled by default.
Approved by: davidch
MFC after: 3 days
On error, freeze device queue, to allow periph driver to do proper recovery.
Freeze SIM queue only in some cases, when it is needed to protect SIM.
Implement better command timeout detection logic for non-queued commands.
This fixes false positives when command with short timeout waiting for the
long one. For example, when hald tastes CD during burning process.
Read and clear SERR register on interrupt.
instead of POSTREAD: the hardware do not touch this memory (CPU
updates it). It is already synchronized as PREWRITE after the
processing is done.
- Synchronize RX return ring memory in rx_eof. This is needed
as the deviced updates this memory when receives packets.
- Decouple the synchronization of BGE status block in the interrupt
service routine: perfrom PREREAD synchronization only all accesses
to this block are finished. This seems to be more natural.
Reviewed by: yongari, marius
MFC after: 2 weeks
has been yanked, this works around a cam recounting bug when
CAM_DEV_UNCONFIGURED is set late in the detach. In certain conditions the
reference to the XPT device would not be released which would cause the usb
explore thread to sleep forever on "simfree", preventing any new usb devices to
be found/ejected on the bus.
This is intended to be a quick workaround to the problem without touching CAM
so it can be merged to 8.0.
Suggested by: mav
MFC after: 3 days
during system initialization time. Since the flow-table is
designed to maintain per CPU flow cache, the existing code
did not check whether "smp_started" is true before calling
sched_bind() and sched_unbind(), which triggers a page fault.
Reviewed by: jeff
MFC after: immediately
by checking PCI config space when the NIC is not
transmitting. Previously, a h/w fault would not have been
detected if the NIC was down, or handling an RX only
workload.
is compared against the entry expiration time value (that was set based
on time_second) to check if the current time is larger than the set
expiration time. Due to the +/- timer granularity value, the comparison
returns false, causing the alternative code to be executed. The
alternative code path freed the memory without removing that entry
from the table list, causing a use-after-free bug.
Reviewed by: discussed with kmacy
MFC after: immediately
Verified by: rnoland, yongari
- Introduce new SI_SUB_RANDOM point in boot sequence to make it
clear from where one may start using random(9). It should be as
early as possible, so place it just after SI_SUB_CPU where we
have some randomness on most platforms via get_cyclecount().
- Move stack protector initialization to be after SI_SUB_RANDOM
as before this point we have no randomness at all. This fixes
stack protector to actually protect stack with some random guard
value instead of a well-known one.
Note that this patch doesn't try to address arc4random(9) issues.
With current code, it will be implicitly seeded by stack protector
and hence will get the same entropy as random(9). It will be
securely reseeded once /dev/random is feeded by some entropy from
userland.
Submitted by: Maxim Dounin <mdounin@mdounin.ru>
MFC after: 3 days
support unloading. It's not trivial to implement newnfslock unloading so
for now just admit that unloading is unsupported and refuse to attempt
unload in all nfscl module event handlers.
Reviewed by: rmacklem
Approved by: trasz (mentor)
be called after ncl_uninit() when unloading the nfscl module because
ncl_uninit() uses ncl_iod_mutex which is destroyed in nfscl_modevent().
Reviewed by: rmacklem
Approved by: trasz (mentor)
the race where interrupt thread can complete the request for which
timeout has fired and while mpt_timeout has blocked on mpt_lock.
Do a best effort to keep 4.x ang Giant-locked configurartions
compiling still.
Reported by: ups
Reviewed by: scottl
- Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and
ROM area separately. Most notably, ROM area is mapped as device memory
(uncacheable) as it should be. User memory is dynamically allocated and
free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and
potentially dangerous x86bios_alloc.c. If this emulator ever grows to
support non-PC hardware, we may implement it with rman(9) later.
- Move all host-specific initializations from x86emu_util.c to x86bios.c and
remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not
supported. We may use bus_space(9) later when the KPI is fixed.
- Replace all bzero() calls for emulated registers with more obviously named
x86bios_init_regs(). This function also initializes DS and SS properly.
- Add x86bios_get_intr(). This function checks if the interrupt vector is
available for the platform. It is not necessary for PC-compatible hardware
but it may be needed later. ;-)
- Do not try turning off monitor if DPMS does not support the state.
- Allocate stable memory for VESA OEM strings instead of just holding
pointers to them. They may or may not be accessible always. Fix a memory
leak of video mode table while I am here.
- Add (experimental) BIOS POST call for vesa(4). This function calls VGA
BIOS POST code from the current VGA option ROM. Some video controllers
cannot save and restore the state properly even if it is claimed to be
supported. Usually the symptom is blank display after resuming from suspend
state. If the video mode does not match the previous mode after restoring,
we try BIOS POST and force the known good initial state. Some magic was
taken from NetBSD (and it was taken from vbetool, I believe.)
- Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4)
to identify who owns the VESA BIOS. This is very useful for multi-display
adapter setup. By default, the POST video controller is automatically
probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding
vgapci unit number. You may override it from loader but it is very unlikely
to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be
matched because ISA controller does not have necessary device IDs.
- Fix a long standing bug in state save/restore function. The state buffer
pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked,
that's because BX was always zero. :-)
- Clean up register initializations more clearer per VBE 3.0.
- Fix a lot of style issues with vesa(4).
* fix the processing of RANN frames
* the originator and target addresses were swapped and while it worked
fine, it was not spec compliant.
MFC after: 3 days
Now that buffers are deallocated lazily, we should not use
tty*q_getsize() to obtain the buffer size to calculate the low
watermarks. Doing this may cause the watermark to be placed outside the
typical buffer size.
This caused some regressions after my previous commit to the TTY code,
which allows pseudo-devices to resize the buffers as well.
Reported by: yongari, dougb
MFC after: 1 week
Devices that don't implement param() (which means they don't support
hardware parameters such as flow control, baud rate) hardcode the baud
rate to TTYDEF_SPEED. This means the buffer size cannot be configured,
which is a little inconvenient when using canonical mode with big lines
of input, etc.
Make it adjustable, but do clamp it between B50 and B115200 to prevent
awkward buffer sizes. Remove the baud rate assignment from
/etc/gettytab. Trust the kernel to fill in a proper value.
Reported by: Mikolaj Golub <to my trociny gmail com>
MFC after: 1 month
It turned out I did add the code to use the init state devices to set
the termios structure when opening the device, but it seems I totally
forgot to add the bits required to force the actual locking of flags
through the lock state devices.
Reported by: ru
MFC after: 1 week (to be discussed)
compiled to use the Medium/Low code model, which we currently default
to for the userland. GNU/Linux has moved their default to Medium/Middle
some time ago, which probably explains why the current GNU ld(1) uses
a base in the range between 32 and 44 bits instead.
Submitted by: kib
and do not relocate the binary to ET_DYN_LOAD_ADDR. This allows for the
binary author to influence address map of the process. In particular,
when the binary is actually an interpeter, this allows to have almost
usual process address map.
Communicate the relocation bias of the mapping for interpeter-less
ET_DYN binary, that is interperter itself, in AT_BASE aux entry. This
way, rtld is able to find its dynamic structure and relocate itself.
Note that mapbase in the rtld is still wrong and requires further
fixing.
Reported and tested by: rwatson
Discussed with: kan
MFC after: 3 days
Call priv_check(PRIV_VM_SWAP_NORLIMIT) only when per-uid limit is
actually exceed.
Both changes aim at calling priv_check(9) only for the cases when
privilege is actually exercised by the process.
Reported and tested by: rwatson
Reviewed by: alc
MFC after: 3 days
was major changes to initialize RF chipset and set H/W registers and
removed a lot of magic numbers on code. Details are as follows:
- uses the endpoint 0x89 to get TX status information which used to
get TX complete or retry numbers or get a beacon interrupt. It's
only valuable for RTL8187B.
- removes urtw_write[8|16|32]_i functions that it's useless now.
- uses ic->ic_updateslot to set SLOT, SIFS, DIES, EIFS, CW_VAL
registers that doesn't set these whenever the channel is changed.
- code for initializing RF chipset for RTL8187B changed a lot that
there was many problems on TX transfers so it doesn't work properly
even if just for a ping/pong. Now it becomes more stable than
before that TX throughputs using netperf(1) were about 15 ~ 17Mbps/s
though sometimes it encounters packet losses.
- removes a lot of magic numbers that in the previous all of
representing RX and TX descriptors were consisted of magic numbers
and structures. It'd be more readable rather than before.
- calculates TX duration more accurately for urtw(4) devices.
- style(9)
Applications like shells expect EOF to give no graphical output, while
our implementation prints ^D by default (tunable with stty echoctl).
Make the new implementation behave like the old TTY code. Print two
backspaces afterwards.
Reported by: koitsu
MFC after: 1 month
Specifically, clients only trust -ve cache entries while the directory
remains unchanged and discard any -ve cache entries for a directory when
they notice that the modification time of a directory entry changes. The
race involves two concurrent lookups as follows:
- Thread A does a lookup for file 'foo' which sends a lookup RPC to the
server. The lookup fails and the server replies.
- The 'foo' file is created (either by the same client or a different
client) updating the modification time on the parent directory of 'foo'.
- Thread B does a lookup for a different file 'bar' which updates the
cached attributes of the parent directory of 'foo' to reflect the new
modification time after 'foo' was created.
- Thread A finally resumes execution to parse the reply from the NFS
server. It adds a -ve cache entry and sets the cached value of the
directory's modification time that is used for invalidating -ve cached
lookups to the new modification time set by thread B.
At this point, future lookups of 'foo' will honor the -ve cached entry
until the cached entry is pushed out of the name cache's LRU or the
modification time of the parent directory is changed again by some other
change. The fix is to read the directory's modification time before
sending the lookup RPC and use that cached modification time when setting
the directory's cached modification time. Also, we do not add a -ve cache
entry if another thread has added -ve cache entry that set the directory's
cached modification time to a newer value than the value we read before
sending the lookup RPC.
Reviewed by: rmacklem
MFC after: 1 week
all host controllers at the same time, we avoid problems where the BIOS will
actually write to the USB registers of all the USB host controllers every time
we handover one of them, and consequently reset the OS programmed values.
Submitted by: avg
Reviewed by: jhb
handlers. This is primarily intended as a way to allow devices that use
multiple interrupts (e.g. MSI) to meaningfully distinguish the various
interrupt handlers.
- Add a new BUS_DESCRIBE_INTR() method to the bus interface to associate
a description with an active interrupt handler setup by BUS_SETUP_INTR.
It has a default method (bus_generic_describe_intr()) which simply passes
the request up to the parent device.
- Add a bus_describe_intr() wrapper around BUS_DESCRIBE_INTR() that supports
printf(9) style formatting using var args.
- Reserve MAXCOMLEN bytes in the intr_handler structure to hold the name of
an interrupt handler and copy the name passed to intr_event_add_handler()
into that buffer instead of just saving the pointer to the name.
- Add a new intr_event_describe_handler() which appends a description string
to an interrupt handler's name.
- Implement support for interrupt descriptions on amd64 and i386 by having
the nexus(4) driver supply a custom bus_describe_intr method that invokes
a new intr_describe() MD routine which in turn looks up the associated
interrupt event and invokes intr_event_describe_handler().
Requested by: many
Reviewed by: scottl
MFC after: 2 weeks
1. There is a regression issue in the ARP code. The incomplete
ARP entry was timing out too quickly (1 second timeout), as
such, a new entry is created each time arpresolve() is called.
Therefore the maximum attempts made is always 1. Consequently
the error code returned to the application is always 0.
2. Set the expiration of each incomplete entry to a 20-second
lifetime.
3. Return "incomplete" entries to the application.
Reviewed by: kmacy
MFC after: 3 days
short read requests, so the result was that a /boot.config smaller than 512
bytes was ignored. boot2 uses fsread() instead of xfsread() to read
/boot.config already, so this makes zfsboot more like boot2.
Submitted by: Johny Mattsson johny-freebsd of earthmagic org
Reviewed by: dfr
MFC after: 3 days
virtualizing the pfil hooks.
For consistency add the V_ to virtualize the pfil hooks in here as well.
MFC after: 55 days
X-MFC after: julian MFCed r197952.
to the lock we hold, disable interrupts, and announce to the firmware
that we are shutting down. Especially do this before disabling blocks.
This makes some types of machines with asf enabled no longer hang upon
boot, when we start configuring the interface.
PR: i386/96382, kern/100410, kern/122252, kern/116328
Reported by: erwin
Hardware provided by: TDC A/S
Reviewed by: stas
Tested by: stas
- Move USB serial drivers earlier to match their placement in other kernel
configs.
- Add descriptions to various USB drivers.
- Move the USB wireless drivers into a new section.
- Add ulscom to the list of USB serial drivers.
Sun Type 6 USB keyboard support added in rev 1.46 conflicted with
some scan codes used in Japanese keyboards because the scan code
conversion routine was ambiguous for the overlapped codes.
PR: ports/134005
Submitted by: YAMASHIRO Jun
Adding a tentative address is useless.
- Comment out a confused warning message when
in6_ifattach_linklocal() fails. This can occur when the
interface does not support ioctl(SIOCAIFADDR) (interfaces
associated with 802.11 wireless network device drivers, for
example).
not blocking the signal, signal is placed on the thread sigqueue. If
the selected thread is in kernel executing thr_exit() or sigprocmask()
syscalls, then signal might be not delivered to usermode for arbitrary
amount of time, and for exiting thread it is lost.
Put process-directed signals to the process queue unconditionally,
selecting the thread to deliver the signal only by the thread returning
to usermode, since only then the thread can handle delivery of signal
reliably. For exiting thread or thread that has blocked some signals,
check whether the newly blocked signal is queued for the process, and
try to find a thread to wakeup for delivery, in reschedule_signal(). For
exiting thread, assume that all signals are blocked.
Change cursig() and postsig() to look both into the thread and process
signal queues. When there is a signal that thread returning to usermode
could consume, TDF_NEEDSIGCHK flag is not neccessary set now. Do
unlocked read of p_siglist and p_pendingcnt to check for queued signals.
Note that thread that has a signal unblocked might get spurious wakeup
and EINTR from the interruptible system call now, due to the possibility
of being selected by reschedule_signals(), while other thread returned
to usermode earlier and removed the signal from process queue. This
should not cause compliance issues, since the thread has not blocked a
signal and thus should be ready to receive it anyway.
Reported by: Justin Teller <justin.teller gmail com>
Reviewed by: davidxu, jilles
MFC after: 1 month
packet filters. ALso allows ipfw to be enabled on on ejail and disabled
on another. In 8.0 it's a global setting.
Sitting aroung in tree waiting to commit for: 2 months
MFC after: 2 months
This is needed by the upcoming AR9285 support.
Information on the layout gathered from Linux ath9k.
Not yet connected to the build.
Tested by: Eugeny Dzhurinsky
set quite late in the revocation path, properly verify that vnode is
not doomed before calling VOP.
Reported and tested by: Harald Schmalzbauer <h.schmalzbauer omnilan de>
MFC after: 3 days
by looking at the bases used for non-relocatable executables by gnu ld(1),
and adjusting it slightly.
Discussed with: bz
Reviewed by: kan
Tested by: bz (i386, amd64), bsam (linux)
MFC after: some time
unlocked. fdrop() closes file descriptor when reference count goes to
zero. Close method for vnodes locks the vnode, resulting in "sleepable
after non-sleepable". For pipes, pipe mutex is before kqueue lock,
causing LOR.
Reported and tested by: pho
MFC after: 2 weeks
specify their own version of atomic_cmpset_* which could have been
different than the membar version.
Right now, however, FreeBSD is bound mostly to GCC-like compilers and
it is desired to add new support and compat shim mostly when there is
a real necessity, in order to avoid too much compatibility bloats.
In this optic, bring back atomic_cmpset_{acq, rel}_* to be the same as
atomic_cmpset_* and unwind the atomic_cmpset_barr_* introduction.
Requested by: jhb
Reviewed by: jhb
Tested by: Giovanni Trematerra <giovanni dot trematerra at
gmail dot com>
depend on on-disk metadata. This was we won't attach to providers that are used
by other classes. For example we don't want to configure partitions on da0 if
it is part of gmirror, what we really want is partitions on mirror/foo.
During regular work it works like this: if provider is open for writing a class
receives the spoiled event from GEOM and detaches, once provider is closed the
taste event is send again and class can rediscover its metadata if it is still
there. This doesn't work that way when new class arrives, because GEOM gives
all existing providers for it to taste, also those open for writing. Classes
have to decided on their own if they want to deal with such providers (eg.
geom_dev) or not (classes modified by this commit).
Reported by: des, Oliver Lehmann <lehmann@ans-netz.de>
Tested by: des, Oliver Lehmann <lehmann@ans-netz.de>
Discussed with: phk, marcel
Reviewed by: marcel
MFC after: 3 days
- Allocate memory for wakeup code after ACPI bus is attached. The early
memory allocation hack was inherited from i386 but amd64 does not need it.
- Exclude real mode IVT and BDA explicitly. Improve comments about memory
allocation and reason for the exclusions. It is a no-op in reality, though.
- Remove an unnecessary CLD from wakeup code and re-align.
These strings often contain things like:
- Window titles.
- Extended key map functionality.
- Color palette switching.
We could look at these features in the future (if people consider them
to be important enough), but we'd better discard them now. This fixes
some artifacts people reported when using TERM=xterm.
Reported by: des@, Paul B. Mahol
received, we don't have to do it on every ENXIO error in I/O path.
Solaris has no GEOM so they have to handle it in a less clean way.
MFC after: 3 days
to reference the lock, look up the grant cookie when the GRANTED_RES
comes back. Properly handle the case of an error on the grant. Add a
short expiration window so that granted locks are not freed immediately.
Approved by: dfr (mentor)
MFC after: 2 weeks
BGE_PCI_PRODID_ASICREV register to store the chip identifier and its revision.
- Add new grouping macro for 7575+ chips (BGE_IS_5755_PLUS).
- Add IDs for Fujitsu-branded Broadcom adapters.
PR: kern/127587
Tested by: Thomas Quinot <thomas@quinot.org> (BCM7561 A0)
MFC after: 2 weeks
Obtained from: OpenBSD
to set ownership and mode in the same setattr operation, the mode was
overwritten by secpolicy_vnode_setattr().
PR: kern/118320
Submitted by: Mark Thompson <info-gentoo@mark.thompson.bz>
MFC after: 3 days
not defined through macros or similar) in order to be later compiled in
the kernel and offer this way the support for modules (and
compatibility among the UP case and SMP case).
Fix this for the newly introduced atomic_cmpset_barr_* cases by defining
and specifying a template. Note that the new DEFINE_CMPSET_GEN()
template save more typing on amd64 than the current code. [1]
- Fix the style for memory barriers on amd64.
[1] Reported by: Paul B. Mahol <onemda at gmail dot com>
memory barriers should also ensure that the compiler doesn't reorder paths
where they are used. GCC, however, does that aggressively, even in
presence of volatile operands. The most reliable way GCC offers for avoid
instructions reordering is clobbering "memory" even if that is
theoretically an heavy-weight operation, flushing the content of all
the registers and forcing reload of them (We could rely, however, on
gcc DTRT by just understanding the purpose as this is a well-known
pattern for many modern operating-systems).
Not all our memory barriers, right now, clobber memory for GCC-like
compilers. The most notable cases are IA32 and amd64 where the memory
barrier are treacted the same as normal atomic instructions.
Fix this by offering the possibility to implement atomic instructions
with memory barriers separately from the normal version and implement
the GCC-like specific one using memory clobbering.
Thanks to Chris Lattner (@apple) for his discussion on llvm specifics.
Reported by: jhb
Reviewed by: jhb
Tested by: rdivacky, Giovanni Trematerra
<giovanni dot trematerra at gmail dot com>
segment is likely to trigger a TCP state change (i.e., FIN/RST/SYN).
If we later have to upgrade the lock, we acquire an inpcb reference
and drop both global/inpcb locks before reacquiring in-order. In
that gap, the connection may transition into TIMEWAIT, so we need
to loop back and reevaluate the inpcb after relocking.
MFC after: 3 days
Reported by: Kamigishi Rei <spambox at haruhiism.net>
Reviewed by: bz
- support for the new Gen-2, BT, and LP-CR cards.
- T3 firmware 7.7.0
- shared "common code" updates.
Approved by: gnn (mentor)
Obtained from: Chelsio
MFC after: 1 month
instead of sizeof(int), and on sparc64 that resulted in fetching wrong
value for acl_maxcnt, which in turn caused __acl_get_link(2) to fail
with EINVAL.
PR: sparc64/139304
Submitted by: Dmitry Afanasiev <KOT at MATPOCKuH.Ru>
and progif is evil. It doesn't work reliably[1] and we should honor BIOS
configuration by the user.
- If the SATA controller is enbled but combined mode is disabled, mask off
the emulated IDE channel on the legacy IDE controller.
Pointed out by: mav[1]
sockets. This allows for reliable bi-directional datagram communication
over UNIX domain sockets, in contrast to SOCK_DGRAM (M:N, unreliable) or
SOCK_STERAM (bi-directional bytestream). Largely, this reuses existing
UNIX domain socket code. This allows applications requiring record-
oriented semantics to do so reliably via local IPC.
Some implementation notes (also present in XXX comments):
- Currently we lack an sbappend variant able to do datagrams and control
data without doing addresses, so we mark SOCK_SEQPACKET as PR_ADDR.
Adding a new variant will solve this problem.
- UNIX domain sockets on FreeBSD provide back-pressure/flow control
notification for stream sockets by manipulating the send socket
buffer's size during pru_send and pru_rcvd. This trick works less well
for SOCK_SEQPACKET as sosend_generic() uses sb_hiwat not just to
manage blocking, but also to determine maximum datagram size. Fixing
this requires rethinking how back-pressure is done for SOCK_SEQPACKET;
in the mean time, it's possible to get EMSGSIZE when buffers fill,
instead of blocking.
Discussed with: benl
Reviewed by: bz, rpaulo
MFC after: 3 months
Sponsored by: Google
pmap_dcache_wbinv_all/pmap_copy_page functions which we might want
to take advatage of later. This fixes the build with PMAP_DEBUG
defined.
Discussed with: cognet
first and the native ia32 compat as middle (before other things).
o(ld)brandinfo as well as third party like linux, kfreebsd, etc.
stays on SI_ORDER_ANY coming last.
The reason for this is only to make sure that even in case we would
overflow the MAX_BRANDS sized array, the native FreeBSD brandinfo
would still be there and the system would be operational.
Reviewed by: kib
MFC after: 1 month
interface is fairly simple WRT dealing with flow control, but
needed 2 new RX buffer functions with "get-char-from-buf" separated
from "advance-buf-pointer" so that the pointer could be advanced
only when ttydisc_rint() succeeded.
MFC after: 1 week
virtual address 0, limiting the ability to convert a kernel
NULL pointer dereference into a privilege escalation attack.
If the sysctl is set to 0 a newly started process will not be able
to map anything in the address range of the first page (0 to PAGE_SIZE).
This is the default. Already running processes are not affected by this.
You can either change the sysctl or the tunable from loader in case
you need to map at a virtual address of 0, for example when running
any of the extinct species of a set of a.out binaries, vm86 emulation, ..
In that case set security.bsd.map_at_zero="1".
Superseeds: r197537
In collaboration with: jhb, kib, alc
Note that when the interface has ND6_IFF_IFDISABLED, a newly-added
address is always marked as IN6_IFF_TENTATIVE so that the interface
can perform DAD after the ND6_IFF_IFDISABLED is cleared.
